Manuale d’uso / di manutenzione del prodotto BES450W del fabbricante Whirlpool
Vai alla pagina of 16
Electric 27” and 24” Built-In Single and Double Self-Cleaning Ovens Useand CareGuide ROPER Appliances BES430W BES730W BES450W BES750W Thank you for choosing a Roper appliance. This Use and Care Guide will help you operate and maintain your new, quality- built Roper built-in oven.
Important Safety Instructions To reduce the risk of fire, electrical shock, injury to persons, or damage when using the oven, follow basic precautions, including the following: 1. Read all instructions before using the oven. 2. Install or locate the oven only in accordance with the provided Installation Instructions.
Parts & Features Models BES430W, BES450W, BES730W & BES750W Oven vent (on top) I Control panel I Lock lever Double oven control panel Set/cancel Time/temp button set knob Timer button Clock St.
Using Your Oven The electronic oven controls There are three parts in the oven control section: - The digital display. - The command buttons. - The Time/Temp Set Knob. Instructions for each oven control are covered on the following pages. Read them carefully.
The lower oven control (for double ovens) The lower oven can be used for baking, roasting and broiling. It is controlled by a single Temperature Control, with settings from 150°F (warm) to BROIL (550°F). Be sure the Temperature Control is turned to OFF when the oven is not in use.
How to Dosition racks and Dans The hot air must circulate around the * * The rack(s) should be placed so the top pans in the oven for even heat to reach of the food will be centered in the oven. all parts of the oven. Always leave at least 1 l/2 to 2 inches (4-5 cm) between the sides of the pan and the oven walls and other pans.
Broiling Setting the oven controls 1. Position the rack before turning on the oven. The oven rack should be positioned so that the surface of the food is at least 3 inches (7.4 cm) away from the broil element. Refer to a rack placement chart and broiling chart in a reliable cookbook for recommended rack positions and broiling times.
Using the electronic Cook Timer clock (single/upper oven) The electronic Cook Timer clock is designed to turn the oven on and off at times you set, even when you are not around. Automatic baking is ideal for foods which do not require a preheated oven such as meats and casseroles.
Caring For Your Oven Several finishes have been used on this oven. To prevent damage to these finishes, follow the suggested cleaning method(s) for that finish. Burn And Electrical Shock Hazard Make sure all controls are OFF and the oven is COOL before cleaning.
Using the Self-Cleaning cycle (single/upper oven) The Self-Cleaning cycle uses very high heat to burn away soil. Before you start, make sure you understand exactly how to use the Self-Cleaning cycle safely. Before you start Do not hand clean seal 1. Clean the areas shown by hand.
Setting the controls for a delayed Self-Cleaning cycle 1. Make sure the clock is set to the right time of day. (See “Setting the electronic clock” on page 4.) 2. Move the Lock Lever all the way to the right. The LOCK indicator will come on. 3. Push the Clean button and turn the Time/Temp Set Knob to the desired cleaning time.
Cleaning chart Burn And Electrical Shock Hazard Make sure all controls are OFF and the oven is cool before cleaning. Failure to do so can result in burns or electrical shock. PART Exterior surfaces Control knobs WHAT TO USE Warm, soapy water and a soft cloth.
The oven lights When you open an oven door, its Oven Light will come on. To turn the light on when the oven door is closed, push the Oven Light Switch on the control panel. Push the swatch again to turn off the light. Electrical Shock And Personal Injury Hazard .
Before You Call For Service If you are having an operating problem, check the chart to see what the cause might be before you call for assistance. OPERATING PROBLEM Nothing operates. CHECK IF . Oven is properly connected to a live circuit with the proper voltage.
THIS PAGE INTENTIONALLY LEFT BLANK.
LIMITED WARRANTY ROPER Appliances LENGTH OF WARRANTY (From date of purchase) PRODUCTS COVERED WHAT WE WILL PAY FOR FULL ONE YEAR WARRANTY All Roper Appliances Replacement parts and repair labor to correct defects in materials or workmanship.
Un punto importante, dopo l’acquisto del dispositivo (o anche prima di acquisto) è quello di leggere il manuale. Dobbiamo farlo per diversi motivi semplici:
Se non hai ancora comprato il Whirlpool BES450W è un buon momento per familiarizzare con i dati di base del prodotto. Prime consultare le pagine iniziali del manuale d’uso, che si trova al di sopra. Dovresti trovare lì i dati tecnici più importanti del Whirlpool BES450W - in questo modo è possibile verificare se l’apparecchio soddisfa le tue esigenze. Esplorando le pagine segenti del manuali d’uso Whirlpool BES450W imparerai tutte le caratteristiche del prodotto e le informazioni sul suo funzionamento. Le informazioni sul Whirlpool BES450W ti aiuteranno sicuramente a prendere una decisione relativa all’acquisto.
In una situazione in cui hai già il Whirlpool BES450W, ma non hai ancora letto il manuale d’uso, dovresti farlo per le ragioni sopra descritte. Saprai quindi se hai correttamente usato le funzioni disponibili, e se hai commesso errori che possono ridurre la durata di vita del Whirlpool BES450W.
Tuttavia, uno dei ruoli più importanti per l’utente svolti dal manuale d’uso è quello di aiutare a risolvere i problemi con il Whirlpool BES450W. Quasi sempre, ci troverai Troubleshooting, cioè i guasti più frequenti e malfunzionamenti del dispositivo Whirlpool BES450W insieme con le istruzioni su come risolverli. Anche se non si riesci a risolvere il problema, il manuale d’uso ti mostrerà il percorso di ulteriori procedimenti – il contatto con il centro servizio clienti o il servizio più vicino.
