Manuale d’uso / di manutenzione del prodotto VERITON 7200 del fabbricante Acer
Vai alla pagina of 92
V eriton 7200 series (V eriton 7200/V eriton 7200D) User’ s guide VT7200-ug-e.book Page i Monday, December 17, 2001 11:58 AM.
Changes may be made periodically to the information in this publication without obligation to notify any person of such revision or changes. Such changes will be incorporated in new editions of this manual or supplementary documents and publications.
iii Notices FCC notice This device has been tested and found to comply with the limits for a Class B digital device pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.
iv Use conditions This part complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
v 8. If an extension cord is used with this product, make sure that the total ampere rating of the equipment plugged into the extension cord does not exceed the extension cord ampere rating. Also, make sure that the total rating of all products plugged into the wall outlet does not exceed the fuse rating.
vi Laser compliance statement The CD or DVD drive in this computer is a laser product. The CD or DVD drive’ s classification label (shown below) is located on the drive. CLASS 1 LASER PRODUCT CAUTION: INVISIBLE LASER RADIA TION WHEN OPEN. A VOID EXPOSURE TO BEAM.
vii ADV ARSEL Eksplosjonsfare ved feilaktig skifte av batteri. Benytt samme batteritype eller en tilsvarende type anbefalt av apparatfabrikanten. Brukte batterier kasseres i henhold til fabrikantens instruksjoner . VA R N I N G Explosionsfara vid felaktigt batteribyte.
viii VT7200-ug-e.book Page viii Monday, December 17, 2001 11:58 AM.
Contents Notices iii 1 First things first 1 Package contents 3 Taking care of your computer 4 Important tips 4 Cleaning and servicing 4 Asking for technical assistance 5 Accessing the online guide 6 2.
x Network 36 USB devices 37 Multimedia devices 39 4 Upgrading your computer 43 Installation precautions 45 ESD precautions 45 Preinstallation instructions 45 Post-installation instructions 46 Opening .
1 First things first VT7200-ug-e.book Page 1 Monday, December 17, 2001 11:58 AM.
This chapter describes the contents of your computer package and also provides important tips on how to take care of your computer . VT7200-ug-e.book Page 2 Monday, December 17, 2001 11:58 AM.
3 Package contents Before you unpack your computer, make sure that you have enough space to set up your computer. Carefully unpack the carton and remove the contents.
1 First things first 4 T aking car e of your computer Please read the important instructions listed in this section. Following these instructions will help you maximize the durability of your computer. Important tips • Do not expose the computer to direct sunlight.
5 T o clean your mouse 1. Open the circular cover underneath the mouse. 2. T ake out the rubber ball and wipe it with a soft, damp cloth. 3. Put the ball back and close the cover . T o clean your monitor Make sure that you keep your screen clean. For cleaning instructions, refer to the documentation that came with your monitor.
1 First things first 6 Accessing the online guide You may also refer to the Veriton 7200 series online guide for information about your computer. To access the online guide, simply double-click on the Veriton 7200 series Online icon on your Windows desktop.
2 System tour VT7200-ug-e.book Page 7 Monday, December 17, 2001 11:58 AM.
This chapter discusses the features and components of your computer . VT7200-ug-e.book Page 8 Monday, December 17, 2001 11:58 AM.
9 Featur es Here are just a few of your computer’s many features: Performance • Intel Pentium® 4 processor with Intel NetBurst™ micro- architecture • System memory expandable to: • V eriton.
2 System tour 10 Connectivity • PS/2 mouse and keyboard interfaces • T wo serial and one parallel interfaces • Universal Serial Bus (USB) ports (two on the front and two on the rear panel) • High-speed fax/data PCI modem (optional) • 10Base-T/100Base-TX network support with remote wake-up function VT7200-ug-e.
11 Fr ont panel Your computer’s front panel consists of the following: Label Icon Component 1 CD-ROM/DVD-ROM/CD-RW tray 2 Stop/Eject button 3 Skip/Forward button 4 Hard disk activity light-emitting .
2 System tour 12 Note: The system has two microphone-in ports (front and rear). However, you can not use both of them at the same time. The default setting for your system enables the microphone-in port in front and disables the one at the back. 11 5.
13 Rear panel Your computer’s rear panel consists of the following: Label Icon Color Component 1P o w e r s w i t c h 2 V oltage selector switch 3P o w e r c o r d s o c k e t 4 White Network port 5 Burgundy Parallel/Printer port 6 Gold Game/MIDI port 7 CRT/LCD monitor port 8 Power supply 9 Green PS/2 mouse port VT7200-ug-e.
2 System tour 14 For information on how to connect the peripherals, see “Connecting peripherals” on page 27 and “Connecting options” on page 34.
15 Keyboar d The keyboard has full-sized keys that include separate cursor keys, two Windows keys, and twelve function keys. Item Component Description 1 Function keys Performs specific functions, depending on the application that uses them.
2 System tour 16 3 Windows logo key Start button. Combinations with this key perform special functions, such as: • Windows + Tab : Activate the next Taskbar button • Windows + E : Explore My Compu.
17 10 Multimedia keys Allow you to do the following: • Play/Pause button : press to start playing the audio track or video file. Press again to pause. • Stop button : press to stop playing the audio track or video file. • Forward button : press to skip forward to the next track or video file and start playing.
2 System tour 18 Mouse Your mouse has one ratchet wheel and two buttons: a left button and a right button. Quickly pressing and releasing the buttons is called clicking. Sometimes, you will need to do a double-click (clicking the same button twice quickly) or a right-click (clicking the right button quickly).
19 Disk drives Your computer comes with the following disk drives: Floppy drive Your computer’s 3.5-inch floppy drive can handle 720-KB and 1.44-MB capacity diskettes.
2 System tour 20 CD-ROM/DVD-ROM/CD-RW drive Your computer may come with a CD-ROM, DVD-ROM or a CD-RW drive. This drive is located on the front panel of your computer.
21 2. When the disc tray slides open, insert the CD or DVD. Make sure that the label or title side of the disc is facing upward. When holding a disc, hold it by the edges to avoid leaving smudges or fingerprints. 3. Push the eject button again to close the tray .
2 System tour 22 VT7200-ug-e.book Page 22 Monday, December 17, 2001 11:58 AM.
3 Setting up your computer VT7200-ug-e.book Page 23 Monday, December 17, 2001 11:58 AM.
This chapter contains step-by-step instructions on how to set up your computer and connect additional peripherals. VT7200-ug-e.book Page 24 Monday, December 17, 2001 11:58 AM.
25 Arranging a comfortable work ar ea Working safely begins with the arrangement of your work space and the proper use of equipment. For this reason, it is very important to take time and think about how you are going to arrange your work area.
3 Setting up your computer 26 Positioning your monitor Place your monitor at a comfortable viewing distance, usually 50 to 60 centimeters away. Adjust the display in such a way that the top of the screen is at or slightly below eye level. Positioning your keyboar d The location of the keyboard is a very important factor to your posture.
27 Connecting peripherals Setting up your computer is easy. For the most part, you only have four things to connect: the USB keyboard, the USB mouse, the monitor, and the power cable. USB Keyboar d Plug the keyboard cable into the USB port (black port) located on the front or rear panel of your computer.
3 Setting up your computer 28 USB Mouse Plug the mouse cable into the USB port (black port) located on the front or rear panel of your computer. VT7200-ug-e.
29 Note: If you are using a PS/2 mouse, plug the mouse cable into the PS/2 mouse port (green port) located on the rear panel of your computer . Monitor To connect a monitor, simply plug the monitor cable into the monitor port located on the rear panel of your computer.
3 Setting up your computer 30 Power cable Caution: Before you proceed, check the voltage range in your area. Make sure that it matches your computer’ s voltage setting (refer to page 13 for the location of the voltage selector switch on the rear panel of your computer).
31 T ur ning on your computer After connecting the necessary peripherals and plugging in the power cable, you are now ready to turn the computer on and get to work. To turn on your computer: 1. T urn on all peripherals connected to your computer such as the monitor , printer , fax, speakers, etc.
3 Setting up your computer 32 3. On the front panel of your computer , press the power button. Important: Make sure that the power cable is properly plugged into an electrical outlet. If you are using a power strip or an A VR (Auto-V oltage Regulator), make sure that it is plugged in and turned on.
33 T ur ning of f your computer To turn off your computer, click on the Start button, highlight Shut Down , select Shut down ; then click on OK . You can then turn off all peripherals connected to your computer. If you cannot shut down your computer normally, press the power button for at least four seconds.
3 Setting up your computer 34 Connecting options Printer To connect a printer, plug the printer cable into the parallel port (burgundy port) located on the rear panel of your computer. Note: The printer shown below is for your reference only . Actual device model may vary in select countries.
35 Serial mouse To connect a serial mouse, plug the serial mouse cable into the serial port (teal or turquiose port) located on the rear panel of your computer.
3 Setting up your computer 36 Network You can connect your computer to a Local Area Network (LAN) using a network cable. To do so, simply plug the network cable into the network port on the rear panel of your computer. Note: Consult your operating system manual for information on how to configure your network setup.
37 USB devices Universal Serial Bus (USB) is a new serial bus design that is capable of cascading peripherals such as a keyboard, mouse, joystick, scanner, printer and modem. With USB, complex cable connections can be eliminated. Your computer comes with four USB ports: two each on both the front and rear panels.
3 Setting up your computer 38 Note: Most USB devices have a built-in USB port which allows you to connect or daisy-chain more USB devices. VT7200-ug-e.
39 Multimedia devices You can connect multimedia devices such as microphone, headphone or earphone, external speakers, audio line-in device and a joystick (for games). These devices will allow you to take advantage of your computer’s multimedia features.
3 Setting up your computer 40 • earphones, headphones: connect to the Headphone-out jack (lime jack) located on the front panel of your computer Note: T o adjust the volume of the headphones, click on the V olume icon located on the taskbar at the bottom of your screen.
41 • external USB speakers: connect to the Audio-out/Line-out jack (lime jack) and USB port (black port) located on the rear panel of your computer . • audio line-in device: connects to the Audio-in/Line-in jack (light blue jack) located on the rear panel of your computer VT7200-ug-e.
3 Setting up your computer 42 • joystick: connects to the Game/MIDI port (gold port) located on the rear panel of your computer VT7200-ug-e.book Page 42 Monday, December 17, 2001 11:58 AM.
4 Upgrading your computer VT7200-ug-e.book Page 43 Monday, December 17, 2001 11:58 AM.
This chapter contains instructions on how to upgrade your computer and basic information about your system boards that you will find helpful when performing the upgrade process.
45 Installation pr ecautions Before you install any computer component, we recommend that you read the following sections. These sections contain important ESD precautions along with preinstallation and post-installation instructions.
4 Upgrading your computer 46 Post-installation instructions Observe the following after installing a computer component: 1. See to it that the components are installed according to the step- by-step instructions in their respective sections. 2. Replace any expansion boards or peripherals that you removed earlier .
47 Opening your computer Caution: Before you proceed, make sure that you have turned off your computer and all peripherals connected to it. Read the “Preinstallation instructions” on page 45. You need to open your computer before you can install additional components.
4 Upgrading your computer 48 4. Hold one side panel with both hands. Slide it back about an inch and then gently pull it outward to detach it. Do the same to the other side. T o reinstall the side panel 1. Align the side panel's hinges to the housing frame and then push it in to slide it back into place.
49 2. Secure the side panels with four screws. VT7200-ug-e.book Page 49 Monday, December 17, 2001 11:58 AM.
4 Upgrading your computer 50 Inter nal components The figure below shows what your computer looks like once you remove the cover: Note: The mainboard model shown in the figure above may not be exactly the same with the one found in your computer . No.
51 Replacing the har d disk Follow these steps to replace your computer’s hard disk: Note: The mainboard model shown in the figures below may not be exactly the same with the one found in your computer . 1. Remove the side panel (see page 47). 2. Remove the four screws that hold the hard disk to the disk frame.
4 Upgrading your computer 52 3. (a) Detach the power and hard disk cables from the hard disk. (b) Detach the hard disk from the drive frame. 4. (a) Insert the new hard disk into the frame. (b) Connect the power and hard disk cables to the new hard disk.
53 5. Secure it with four screws. Note: Make sure that the other ends of the disk cables are securely connected to their corresponding connectors on the mainboard.
4 Upgrading your computer 54 Installing an expansion car d Note: Observe the “Installation precautions” on page 45 when installing or removing a computer component. To install an expansion card: Note: The mainboard model shown in the figures below may not be exactly the same with the one found in your computer .
55 7. Secure the card to your computer with a screw . 8. Reinstall the side panel (see page 48). When you turn on the computer, BIOS (Basic Input/Output System) automatically detects and assigns resources to the newly-installed devices.
4 Upgrading your computer 56 System boar ds Mainboar d layout The mainboard becomes accessible once you open your computer. Refer to the section below for the corresponding mainboard layout of your Veriton 7200 series computer model.
57 V eriton 7200 mainboar d layout VT7200-ug-e.book Page 57 Monday, December 17, 2001 11:58 AM.
4 Upgrading your computer 58 V eriton 7200D mainboar d layout VT7200-ug-e.book Page 58 Monday, December 17, 2001 11:58 AM.
59 Label Component AGP AGP slot BT1 Battery CN2 PS/2 mouse (upper) and keyboard (lower) ports CN3 Power connector CN4 Network (upper) and USB (lower) ports CN5 Serial port (lower right and left) and p.
4 Upgrading your computer 60 1 Share connection with serial port 2 (COM 2) 2 Default value FN3 3-pin system fan connector JP1 LAN active LED connector JP3 Model select JP14 1-2 Clear CMOS 2-3 Normal 2 PCI1 to 3 PCI slots 1 to 3 U5 CPU socket U12 Intel 845 chipset U16 SMSC chipset U21 Intel ICH2 chipset U29 BIOS chipset Label Component VT7200-ug-e.
61 Audio boar d The audio board that came with your computer should look like the figure that follows. Note: The system has two microphone-in ports (front and rear). However, you can not use both of them at the same time. The default setting for your system enables the microphone-in port in front and disables the one at the back.
4 Upgrading your computer 62 Upgrading the memory Installing additional memory for V eriton 7200 The three 168-pin sockets on the mainboard support Synchronous Dynamic Random Access Memory (SDRAM)-type DIMMs. You may install 32-MB, 64-MB, 128-MB, 256-MB, 512-MB or 1-GB DIMMs for a maximum memory capacity of 3 GB.
63 The DDR-SDRAM DIMMs should work under 2.5 volts. PC-2100 (133 MHz) DDR-266 is supported. Contact your dealer for qualified DIMM vendors. Caution! Do not install and use both DDR-200 (PC1600) and DDR- 266 (PC2100) SDRAM together . Such a combination might cause your computer to malfunction.
4 Upgrading your computer 64 T o install a DIMM Note: Observe the “Installation precautions” on page 45 when installing or removing a computer component. Also, make sure that you have removed the computer cover (see page 47). 1. Open the clips on the socket.
5 Softwar e VT7200-ug-e.book Page 65 Monday, December 17, 2001 11:58 AM.
This chapter describes the applications that came with your computer . VT7200-ug-e.book Page 66 Monday, December 17, 2001 11:58 AM.
67 Your computer comes with the following applications: • Acrobat® Reader™ •L D C M • Norton AntiVirus • NTI CD-Maker •P o w e r D V D • BIOS utility All of the applications that came with your computer are very easy to use.
5 Software 68 Acr obat Reader Acrobat Reader is a software that lets you view, navigate, browse and print Adobe Portable Document Format (PDF) files on all major computer platforms.
69 LDCM LANDesk Client Manager (LDCM) allows desktop management via the Web, standard network, or dial-up connections. It is compatible with the leading management specifications, such as Wired for Management 2.0, Desktop Management Interface (DMI) v2.
5 Software 70 Norton AntiVirus Norton AntiVirus is an anti-virus software which finds and repairs infected files, protects against viruses to keep your computer data safe and secure. It also scans incoming email attachments for viruses. It provides useful virus detection and repair facilities.
71 NTI CD-Maker (for models with CD- RW) The NTI CD-Maker is a CD-Recording software which allows you to create and copy audio, data and videos to CD-RW discs. To run NTI CD-Maker: 1. Double-click the NTI CD-Maker icon on your Windows desktop. 2. Follow all onscreen instructions.
5 Software 72 PowerDVD (for models with DVD) PowerDVD is a high-quality, pure software DVD player which brings high-quality movies and karaoke to your multimedia PC. You can play back high resolution DVD titles or MPEG-2 files with MPEG-2 video and Dolby Digital (AC-3) audio.
73 BIOS utility The BIOS utility is a hardware configuration program built into your computer's Basic Input/Output System (BIOS). Since most computers are already properly configured and optimized, there is no need to run this utility.
5 Software 74 Reinstalling pr ograms If you uninstall one of the preinstalled programs and want to reinstall it, do the following: 1. Make sure that the system is turned on. 2. Insert the System CD into the CD or DVD drive. 3. Select the application that you want to reinstall.
6 Q & A VT7200-ug-e.book Page 75 Monday, December 17, 2001 11:58 AM.
This chapter tells you what to do in case your computer is not working properly . However , if a more serious problem arises, contact your dealer or the technical support center (www .
77 The following questions are possible situations that may arise during the use of your computer and each is followed by easy answers and solutions to the situation. Q: I pressed the power switch but the system did not boot up. A: Check the LED located above the power switch.
6 Q & A 78 Q: Nothing appears on the screen. A: Your computer’s power management function automatically blanks the screen to save power. Just press any key to turn the display back on. If pressing a key does not work, you can restart your computer.
79 Q: System cannot read diskette, hard disk, CD or DVD information. A: Check the following: • Make sure that you are using the correct type of disc or diskettes. See “Disk drives” on page 19. • Check if the diskette is formatted correctly . If not, format it again.
6 Q & A 80 VT7200-ug-e.book Page 80 Monday, December 17, 2001 11:58 AM.
81 Index A accessing the online guide 6 add memory Veriton 7200 62 Veriton 7200D 62 applications 67 B BIOS utility 73 C computer maintenance 4 cleaning 4 servicing 4 connecting options multimedia devi.
Index 82 USB mouse 28 keyboard 26 monitor 26 mouse 26 software 67 73 Acrobat Reader 68 LDCM 69 Norton AntiVirus 70 NTI CD-Maker 71 PowerDVD 72 reinstalling programs 74 system boards 56 audio board 61 .
Un punto importante, dopo l’acquisto del dispositivo (o anche prima di acquisto) è quello di leggere il manuale. Dobbiamo farlo per diversi motivi semplici:
Se non hai ancora comprato il Acer VERITON 7200 è un buon momento per familiarizzare con i dati di base del prodotto. Prime consultare le pagine iniziali del manuale d’uso, che si trova al di sopra. Dovresti trovare lì i dati tecnici più importanti del Acer VERITON 7200 - in questo modo è possibile verificare se l’apparecchio soddisfa le tue esigenze. Esplorando le pagine segenti del manuali d’uso Acer VERITON 7200 imparerai tutte le caratteristiche del prodotto e le informazioni sul suo funzionamento. Le informazioni sul Acer VERITON 7200 ti aiuteranno sicuramente a prendere una decisione relativa all’acquisto.
In una situazione in cui hai già il Acer VERITON 7200, ma non hai ancora letto il manuale d’uso, dovresti farlo per le ragioni sopra descritte. Saprai quindi se hai correttamente usato le funzioni disponibili, e se hai commesso errori che possono ridurre la durata di vita del Acer VERITON 7200.
Tuttavia, uno dei ruoli più importanti per l’utente svolti dal manuale d’uso è quello di aiutare a risolvere i problemi con il Acer VERITON 7200. Quasi sempre, ci troverai Troubleshooting, cioè i guasti più frequenti e malfunzionamenti del dispositivo Acer VERITON 7200 insieme con le istruzioni su come risolverli. Anche se non si riesci a risolvere il problema, il manuale d’uso ti mostrerà il percorso di ulteriori procedimenti – il contatto con il centro servizio clienti o il servizio più vicino.
