Manuale d’uso / di manutenzione del prodotto WM-TR II del fabbricante Wells
Vai alla pagina of 18
IMPORTANT: DO NOT DI SCARD THIS MANUAL This manual is considered to be part of the appli ance and is to be given to the OWNER or MANAGER of the restaurant, or to the pers on responsible for TRAI NING OPERATORS of this appliance. Additional manuals a re available fro m your WELLS DEALER.
Unless otherwise specified, all commercial cooking equip- ment manufactured by WELLS MFG. CO. is warranted against defects in materials and workmanship for a period of one year from the date of original installation or 18 months from the date of shipment from our factory, whichever comes first, and is for the benefit of the original purchaser only.
W A R R A N T Y x i S P E C I F I C A T I O N S 1 FEATURES & OPERATING CONTROLS 2 PRECAUTIONS & GENERAL INFORMATION 4 AGENCY LISTING INFORMATION 4 I N S T A L L A T I O N 5 O P E R A T I O N 9.
FEATURES & OPERATING CONTROLS 2 ITEM DESCRIPTION NOTES 1 HEATER SWITCH Controls power to water heater, satellite heater a nd sa tellite fill 2 POWER LIGHT Indicates main power available 3 REFILL L.
FEATURES & OPERATING CONTROLS (continued) Fig. 2 Features & Operating Contro ls - Water Max II™ 5 Gallon Satellite 3 ITEM DESCRIPTION NOTES S1 COVER Forms fill funnel, allows access to tan k.
WARNING: Electric Shock hazard All servicing requiring access to non-insulated electrical components must be performed by a factory authorized technician. DO NOT open any access panel which requires the use of tools. Failure to follow this warning can result in severe electrical shock.
UNPACKING & INSPECTION Carefully remove the appliance from the carton. Remove all prote c tive plastic film, packing materials and acce ssories from the appliance before connecting electrical powe r or otherwise performing any installation procedure.
INST ALLA TION (continued) PLUMBING LINE CONNECTION If power has been run to the dispenser, verify that the circuit breaker is turned OFF , and that the POWER SWITCH is in the OFF [O] position. Water-Max II™ must be connected to a potable water supply.
INST ALLA TION (continued) ELECTRICAL INSTALLATION NOTICE: A DEDICATED CIRCUIT OF AT LEAST 40 AMPS IS REQUIRED. WIRING AND CONNECTIONS MUST BE INSTALLED AND MAINTAINED IN COMPLIANCE WITH FEDERAL, STATE, AND LOCAL ORDINANCES. The dispenser is factory configured for ei ther 208 volts or 240 volts.
INSTALLATION START-UP AND CHECKOUT Before turning on power or wa ter to Water-Max II™, verify: a. Unit is level, with all legs touching the counter b. Water and electrical connection s prope rly made c. HEATER SWITCH is OFF ( O ) d. Removable SATELLITE is NOT installed on Wate r-Max II™ at this time Only after steps a.
OPERA TION Water-Max II™ is used to dispense hot water for food preparation. The SATELLITE TANK stores five gallons of hot water for immediate use. INSTALLING OR REMO VING SATELLITE TANK Drain all water from SATELLITE before attempting to remove from u nit.
CLEANING INSTRUCTIONS DAILY CLEANING PRECAUTIONS: Press HEATER SWITCH to OFF ( O ). Drain all water from SATELLITE. Remove satellite from Water-Max II™. FREQUENCY: Minimum - Daily, or as required TOOLS: Soft Cloth, Soft Bristle Brush Wipe down the exterior of the Water-MaxII™ with a soft damp cloth.
PERIODIC CLEANING - Delime Internal Heating Tank PRECAUTIONS: Water in main tank is EXTREMELY HOT (around 200ºF) FREQUENCY: Wee kly TOOLS: Wells Delimi ng Solution Bottle (p/n 85377) Plastic Scouring.
CONTINUED FROM PAGE 11 After 30 minutes, flush solution fr om main tank (HEATER SWITCH OFF ): Insert drain hose into a suitable container. Open d rain hose clamp and drain valve. Allow all solution to drain. Close drain valve. Reconnect main water supply and allow main ta nk to fill (approximately 4 minutes).
PERIODIC CLEANING - Satellite Tank PRECAUTIONS: Water in satellite is EXTREMELY HOT (around 200ºF) Satellite full of water is HEAVY (62 lbs.) Drain water from SATELLITE before moving. FREQUENCY: Wee kly TOOLS: Plastic Scouring Pad Clean Cloth or Sponge Kay Orange Neutralizer and Delimer (K ay p/n 55905 ) Press HEATER SWITCH to OFF [ O ].
TROUBLESHOOTING SUGGESTIONS There are no user serviceable com pon ents in t he appliance. In all cases of damage or compo nent malfunction, contact your Authorized Wells Servi ce Agency for repairs.
D E S C R I P T I O N S E R V I C E P A R T N O . TANK, 5 GALLON, MODEL DT-5 22658 DEL IMIN G SOLU TION BOTT LE WITH QUICK DISCONNECT FITTING 22800 DEL IMIN G SOLU TION BOTT LE (ONLY) 22801 PITCHER, PLASTIC, 4 QT.
PRINTED IN UNITED STATES OF AMERIC A.
Un punto importante, dopo l’acquisto del dispositivo (o anche prima di acquisto) è quello di leggere il manuale. Dobbiamo farlo per diversi motivi semplici:
Se non hai ancora comprato il Wells WM-TR II è un buon momento per familiarizzare con i dati di base del prodotto. Prime consultare le pagine iniziali del manuale d’uso, che si trova al di sopra. Dovresti trovare lì i dati tecnici più importanti del Wells WM-TR II - in questo modo è possibile verificare se l’apparecchio soddisfa le tue esigenze. Esplorando le pagine segenti del manuali d’uso Wells WM-TR II imparerai tutte le caratteristiche del prodotto e le informazioni sul suo funzionamento. Le informazioni sul Wells WM-TR II ti aiuteranno sicuramente a prendere una decisione relativa all’acquisto.
In una situazione in cui hai già il Wells WM-TR II, ma non hai ancora letto il manuale d’uso, dovresti farlo per le ragioni sopra descritte. Saprai quindi se hai correttamente usato le funzioni disponibili, e se hai commesso errori che possono ridurre la durata di vita del Wells WM-TR II.
Tuttavia, uno dei ruoli più importanti per l’utente svolti dal manuale d’uso è quello di aiutare a risolvere i problemi con il Wells WM-TR II. Quasi sempre, ci troverai Troubleshooting, cioè i guasti più frequenti e malfunzionamenti del dispositivo Wells WM-TR II insieme con le istruzioni su come risolverli. Anche se non si riesci a risolvere il problema, il manuale d’uso ti mostrerà il percorso di ulteriori procedimenti – il contatto con il centro servizio clienti o il servizio più vicino.
