Manuale d’uso / di manutenzione del prodotto AF/AR del fabbricante Viking
Vai alla pagina of 26
Viking Range Corporation 111 Front Str eet Greenwood, Mississippi 38930 USA (662) 455-1200 For product information, call 1-888-VIKING1 (845-4641) or visit the Viking Web site at vikingrange.
4 T able of Contents IMPORT ANT– Please Read and Follow! • Make sure that incoming voltage is the same as unit rating. An electric rating plate specifying voltage, frequency , wattage, amperage, and phase is attached to the product.
6 24–1 1/16 ” ( 62 .7 cm) 3 5– 1 /2 ” ( 90 .2 cm) 35” (8 8 .9 cm) 75– 15/ 16” (1 9 2 .9 cm ) 3–1 9 / 32 ” ( 9 . 1 cm ) ) 36” ( 91 . 5 cm) 27 – 1/ 4” ( 69 .2 c m ) 9 – 5 /3 2 ” (23 .3 c m) 82– 7/ 8” (21 0 .5 cm) M i n to 8 4 – 1/1 6” (21 3 .
Tw o 2”x 4” Mounting Boar ds 3” (7.6 cm) x 3 1/2” (8.9 cm) Note: If unit is installed deeper than 24 ” (61.0 cm), then sh im behind the mountin g boards by the dif ference. Bottom of anti-tip board is 3–7/8” (9.8 cm) below opening height.
Tw o 2”x 4” Mounting Boar ds 3” (7.6 cm) x 3 1/2” (8.9 cm) Note: If unit is installed deeper than 24 ” (61.0 cm), then shim behind the mountin g boards by the dif ference. Bottom of anti-tip boa rd i s 3–7/8” (9.8 cm) below opening height.
2 4– 1 1 / 1 6 ” ( 6 2 .7 c m) 35– 1/2 ” (90 .2 c m ) 1” (2. 54 cm ) Bet wee n U ni ts 3 5 ” (8 8 .9 cm ) 36 ” ( 9 1 . 5 c m ) 9 – 5 /32 ” (23 . 3 c m) 8 2 – 7 / 8 ” (2 1 0 .5 c m) M i n t o 84– 1/ 16 ” (21 3 . 5 cm ) Max 2 0 – 3 / 4 ” (5 2 .
Specifications (Professional All Refrigerator/Fr eezer) 14 24– 11 /16 ” (62 .7 cm ) 35– 1/2” (90. 2 c m) 1” (2.54 c m) Bet wee n U nit s 35” ( 88 . 9 c m ) 3 5 ” ( 8 8 . 9 c m ) 3 6 ” ( 91 . 5 c m) 36 ” ( 9 1 . 5 c m ) 9–5/ 32 ” (23 .
7 9– 3/8” (2 0 1 .6 c m ) m i n t o b ot t o m of a nt i - t i p b o a rd 8 0– 1/2” (2 0 4 .6 cm) ma x t o b ot t o m of a nt i - t i p b o a rd T wo 2”x 4” Mounting Boar ds Per Unit 3” (7.6 cm) x 3 1/2” (8.9 cm) Note: If unit is installed deeper than 24” (61.
7 9– 3/8” (2 0 1 .6 c m ) m i n t o b ot t o m of a nt i - t i p b o a rd 8 0– 1/2” (2 0 4 .6 cm) ma x t o b ot t o m of a nt i - t i p b o a rd Tw o 2”x 4” Mounting Boar ds Per Unit 3” (7.6 cm) x 3 1/2” (8.9 cm) Note: If unit is installed deeper than 24” (61.
7 9– 3 / 8 ” ( 2 0 1 .6 c m ) m i n t o b ot t o m of a nt i - t i p b o a rd 8 0– 1/2” (2 0 4 .6 cm) ma x t o b ot t o m of a nt i - t i p b o a rd Tw o 2”x 4” Mounting Boar ds Per Unit 3” (7.6 cm) x 3 1/2” (8.9 cm) Note: If unit is installed deeper than 24” (61.
T op View 1–13/16” (4.6 cm) Space if 24” standard cabinet depth is used Door 24” (61.0 cm) Standar d Cabinet Depth W all 3/4” (1.9 cm) Full End Panel 2–1/2” (6.4 cm) Offset Partial Overlay Cabinet Door Cabinet Infor mation (Professional) 22 To p View To p View 1–13/16” (4.
Specifications (Designer All Refrigerator/Fr eezer) 24 24” ( 61 .0 cm ) 3 6” ( 91 .5 cm) 35” (8 8 .9 cm) 75– 15/ 16” (1 9 2 .9 cm ) 3–1/ 2” ( 8 . 9 c m ) 9 – 5 /3 2 ” (23 .3 c m) 82– 7/ 8” (21 0 .5 cm) M i n to 8 4 – 1/1 6” (21 3 .
One 2”x 4” Mounting Board 1–1/2” (3.8 cm) x 3 1/2” (8.9 cm) Note: If unit is installed deeper than 24 ” (61.0 cm), then sh im behind the mountin g boards by the dif ference. Bottom of anti-tip boa rd i s 3–7/8” (9.8 cm) below opening height.
One 2”x 4” Mounting Board 1–1/2” (3.8 cm) x 3 1/2” (8.9 cm) Note: If unit is installed deeper than 24” (61.0 cm), then shim behind the mountin g boards by the dif ference. Bottom of anti-tip boa rd i s 3–7/8” (9.8 cm) below opening height.
2 4 ” ( 61 .0 c m) 36” (91 .5 c m ) 1” (2. 54 cm ) Bet wee n U ni ts 3 5 ” ( 88 . 9 c m ) 9 – 5 /32 ” (23 . 3 c m) 8 2 – 7 / 8 ” (2 1 0 .5 c m) M i n t o 84– 1/ 16 ” (21 3 . 5 cm ) Max 20 –3 / 4 ” ( 52. 7 c m ) 23– 1 3 / 1 6 ” ( 56 .
Specifications (Designer All Refrigerator/Fr eezer) 32 24” (61 .0 cm ) 36” ( 91. 4 c m) 1” (2.54 c m) Betwee n U nits 35” ( 88 . 9 c m ) 3 5 ” ( 8 8 . 9 c m ) 9 – 5 / 32 ” (23 .3 c m) 82– 7/ 8 ” ( 21 0 .5 c m ) M in to 8 4 – 1 /1 6 ” ( 21 3.
7 9– 3/8” (2 0 1 .6 c m ) m i n t o b ot t o m of a nt i - t i p bo a rd 8 0– 1/2” (2 0 4 .6 cm) ma x t o b ot t o m of a nt i - t i p b o a rd One 2”x 4” Mounting Boar d Per Unit 1–1/2” (3.8 cm) x 3 1/2” (8.9 cm) Note: If unit is installed deeper than 24” (61.
7 9– 3/8” (2 0 1 .6 c m ) m i n t o b ot t o m of a nt i - t i p b o a rd 8 0– 1/2” (2 0 4 .6 cm) ma x t o b ot t o m of a nt i - t i p bo a rd One 2”x 4” Mounting Boar d Per Unit 1–1/2” (3.8 cm) x 3 1/2” (8.9 cm) Note: If unit is installed deeper than 24” (61.
7 9– 3/8” (2 0 1 .6 c m ) m i n t o b ot t o m of a nt i - t i p bo a rd 8 0– 1/2” (2 0 4 .6 cm) ma x t o b ot t o m of a nt i - t i p bo a rd One 2”x 4” Mounting Boar d Per Unit 1–1/2” (3.8 cm) x 3 1/2” (8.9 cm) Note: If unit is installed deeper than 24” (61.
To p View Overlapping cabinet doors To p View Flush mount cabinet doors Door 24” ( 61 . 0 c m ) St and ard Cabi ne t D e p th 24-3/4” (62.9 cm) W all 3/4” (1.9 cm) Full End Panel 1” (2.5 cm) If standard 25” (63.5 cm) standard cabinet depth is used Flush Cabinet Door Door W all 3/4” (1.
42 41 General Infor mation W ater Supply Requir ements Use only 1/4” (6 mm) copper tubing for water line. Do Not install copper tubing in area wher e temperatures dr op below 35˚ F (1.7˚ C). Before attaching copper tubing to the unit, flush at least 2 quarts (1.
44 1 2a Place unit in front of cutout. (Professional) Lift center grille louver up and pull out. 2b 3 (Designer) Pull the center grille louver up at an angle and pull out. Using an 8” magnetic nut driver , remove the two 1/4” screws. 4 Remove grille assembly .
46 45 Remove four side screws and r emove unit top. Loosen the four hinge screws. Adjust door . Retighten four hinge screws. Replace unit top. Replace four side screws. Attach one 2x4 to wall stud (refer to dimensions page for exact location). If needed, depending on cabinet and depth, attach second 2x4 to first 2x4.
48 47 T urn on water supply and check for leaks. Lift unit off r ollers to desired height and level unit using a 5/16” head wrench. Note: DO NOT use an electric device. Overtightening can cause damage. Attach positive secure self-tapping bolts to 2x4 using a 22” extension.
Perfor mance Checklist 50 h V erify cabinet size. h V erify electrical supply and water supply (if applicable). h Install anti-tip device(s) and verify unit is secure. h Position unit in cutout, level at desired height, and secure unit. h Plug-in unit and verify operation.
52 Service & Registration Service & Parts Only authorized replacement parts may be used in performing service on the appliance. Do not repair or r eplace any part of the appliance unless specifically recommended in the manual. All other servicing should be referr ed to a qualified technician.
Un punto importante, dopo l’acquisto del dispositivo (o anche prima di acquisto) è quello di leggere il manuale. Dobbiamo farlo per diversi motivi semplici:
Se non hai ancora comprato il Viking AF/AR è un buon momento per familiarizzare con i dati di base del prodotto. Prime consultare le pagine iniziali del manuale d’uso, che si trova al di sopra. Dovresti trovare lì i dati tecnici più importanti del Viking AF/AR - in questo modo è possibile verificare se l’apparecchio soddisfa le tue esigenze. Esplorando le pagine segenti del manuali d’uso Viking AF/AR imparerai tutte le caratteristiche del prodotto e le informazioni sul suo funzionamento. Le informazioni sul Viking AF/AR ti aiuteranno sicuramente a prendere una decisione relativa all’acquisto.
In una situazione in cui hai già il Viking AF/AR, ma non hai ancora letto il manuale d’uso, dovresti farlo per le ragioni sopra descritte. Saprai quindi se hai correttamente usato le funzioni disponibili, e se hai commesso errori che possono ridurre la durata di vita del Viking AF/AR.
Tuttavia, uno dei ruoli più importanti per l’utente svolti dal manuale d’uso è quello di aiutare a risolvere i problemi con il Viking AF/AR. Quasi sempre, ci troverai Troubleshooting, cioè i guasti più frequenti e malfunzionamenti del dispositivo Viking AF/AR insieme con le istruzioni su come risolverli. Anche se non si riesci a risolvere il problema, il manuale d’uso ti mostrerà il percorso di ulteriori procedimenti – il contatto con il centro servizio clienti o il servizio più vicino.
