Manuale d’uso / di manutenzione del prodotto STS91 del fabbricante Venturer
Vai alla pagina of 39
.
E - 1 Important Safety Instructions W ARNING: T O PREVENT FIRE OR SHOCK HAZARD, DO NOT EXPOSE THIS APPLIANCE TO RAIN OR MOISTURE. CA UTION: T O PREVENT ELECTRIC SHOCK, MA TCH WIDE BLADE OF PLUG T O WIDE SLO T , FULL Y INSERT . WARNING: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK).
E - 2 IMPOR T ANT SAFETY INSTR UCTIONS 1 . Read Instructions - All the safety and operating instructions should be read before the appliance is operated. 2 . Retain Instructions - The safety and operating instructions should be retained for future reference.
E - 3 T ab le of Contents Important Safety Instruction ..................... 1-2 Disc Formats ................................................ 4 Before You Start ........................................... 5 Using the remote control ..................
E - 4 The unit can playback discs bearing any of the following marks: Region Management Information Region Management Information: This unit is designed and manufactured to respond to the Region Management Information that is encoded on DVD discs.
E - 5 Bef ore Y ou Star t To install Batteries 1. Open the battery door. Battery Replacement When batteries become weak, the operating distance of the Remote Control is greatly reduced and you will need to replace the batteries.
E - 6 P arts and Functions (Continued on next page) (Continued on next page) (Continued on next page) (Continued on next page) (Continued on next page) Remote Control 1 ) FUNCTION button Display the FUNCTION screen where you can check or change various setting.
E - 7 P arts and Functions Remote Control (Continued on next page) (Continued on next page) (Continued on next page) (Continued on next page) (Continued on next page) 1 8) STANDBY / ON [ I / ] button Turns the Unit on and puts it in standby mode. 19 ) NEXT button Move forward through titles, chapters or tracks on a disc.
E - 8 Rear Panel Front and Top Panel P ar ts and Functions Note: Screen saver - If no button is pressed within 2 minutes, the function will active. If you want to return the normal screen, press any button.
E - 9 Region (Local) Number Error Indicator If the region (local) number of the disc that you attempt to play differs from the region number of the Unit. "Invalid Region" appears on the TV screen. (The disc cannot be played). If no disc is loaded when the Main Unit is switched on.
E - 10 Setup (continued to next page) (continued to next page) (continued to next page) (continued to next page) (continued to next page) For better reception FM Connect FM antenna (supplied) to the FM ANTENNA jacks. AM(MW) Connect the loop antenna (supplied) to the AM(MW) LOOP ANTENNA terminals.
E - 11 Setup (continued to next page) (continued to next page) (continued to next page) (continued to next page) (continued to next page) or Component video outputs (DVD) Some TVs or monitors are equipped with component video inputs.
E - 12 Setup B. Connecting a VCR 1. Using the supplied Audio/Video cab le, connect the y ellow plug from VIDEO OUT jack on your Unit to VIDEO IN jack on your TV , connect the left and r ight A UDIO OUT jacks on y our Unit to AUDIO IN jac ks on your TV .
E - 13 Setup (continued to next page) (continued to next page) (continued to next page) (continued to next page) (continued to next page) D. Connecting the speakers & subwoofer The speaker cords have been color-coded to simplify connection.
E - 14 Setup Turning on the Unit and TV 1 )Press the ST ANDBY/ON button to turn the Unit ON, or 2 )Press the ST ANDBY/ON b utton on the remote control or the FUNCTION button or the PLA Y button to turn on the Unit while the Unit is in standby mode. 3 )T ur n on the TV by pressing its PO WER button.
E - 15 Adjusting the Sound (continued to next page) (continued to next page) (continued to next page) (continued to next page) (continued to next page) To adjust the surround sound balance while Dolby.
E - 16 Adjusting the Sound The following table shows which speakers are working in the various modes. 5.1 - Represents FRONT LEFT/RIGHT, REAR LEFT/RIGHT, CENTER speakers and SUBWOOFER 2.
E - 17 (continued on next page) (continued on next page) (continued on next page) (continued on next page) (continued on next page) Playing a Disc DV D C D This owner’ s manual explains the basic instructions of this D VD Unit. Some D VD discs are produced in a manner that allows specific or limited operation during pla yback.
E - 18 (continued on next page) (continued on next page) (continued on next page) (continued on next page) (continued on next page) Fast Forward/Fast Reverse 1. Press the TUNING or TUNING b utton when a disc is pla ying. • The disc begins fast scan at x2 speed.
E - 19 DV D Angle selection Some D VDs contain scenes which hav e been shot from a number of different angles. For these discs, the same scene can be viewed from each of these different angles. 1. While you are pla ying a D VD with different angles recorded, press the ANGLE button to view the number of the current angle.
E - 20 DVD 0 0:09: 29 01:25: 27 Tit le 1/10 Chapt er 3/15 Angle 1/ 3 Audio Su b t itle 2/3 Spa BitR a te 7.1 M b ps Special Functions DV D DISPLA Y function Using DISPLA Y , you can chec k and change the current settings of the follo wing items: ANGLE, A UDIO and SUBTITLE.
E - 21 Locating a specific title If a D VD disc contains title numbers, y ou can locate a specific title by directly selecting a title number . 1. In stop mode, press the GOTO button. 2. Press , or button to highlight a specific field and press the corresponding number button(s) for the title you want.
E - 22 DV D C D Locating a specific time Y ou can mo ve to a specific location b y entering its corresponding time (hours, minutes , seconds). 1. Press the GOTO button. 2. Press or button to highlight time. 3. Press the corresponding number buttons for the setting point you want.
E - 23 Programmable memory The two types of programmed playback provided by this Unit are title programmed playback and chapter programmed playback. Title / Chapter programmed playback 1. Press the MEMOR Y b utton while the disc is stopped. 2. Enter the title numbers in - - .
E - 24 Y ou can pla y a specific title or chapter repeatedly . (Title repeat, chapter repeat, A-B repeat) Repeating a title Y ou can pla y the same title repeatedly . 1. While the disc is pla ying, press the REPEA T DISC b utton until the “ Repea t Title ” indicator displays on the screen.
E - 25 This Unit will play MP3 and Picture files recorded on CD-R disc . Playing a MP3 file disc 1. Press the OPEN/CLOSE button, the disc tray opens. 2. Insert a MP3 file disc on the disc tray with the label side up. 3. Press the OPEN/CLOSE button, the disc tray closes.
E - 26 Playing MP3 and Picture File Disc Playing a Picture file disc 1. Press the OPEN/CLOSE button, the disc tray opens. 2. Insert a Picture CD on the disc tray with the label side up. 3. Press the OPEN/CLOSE button, the disc tray closes. 4. The unit will take a short while to load the disc.
E - 27 LANGU A GE setting 1. Press the FUNCTION button until D VD appears on the displa y . 2. Press the STOP button so that no disc is playing. 3. Press the SETUP button. 4. Use or button to select the Language, then press the ENTER button. 5. Use or b utton to English, then press the ENTER button.
E - 28 4:3 Pan Scan • When wide-screen video material is played, this mode clips the right and left sides of the image so that it can be viewed on a con ventional TV screen. • Some wide-screen D VDs that do not permit Pan Scan mode pla yback are automatically played in letterbox mode (black bands top and bottom).
E - 29 Customizing the Function Settings Brightness 1. Press the SETUP button. 2. Use or button to select Video , then press the ENTER button. 3. Use or button to select Brightness, and then press the ENTER button. 4. Use or button to shift and select the Off/On, then press the ENTER button.
E - 30 A UDIO setting Digital Out 1. Press the SETUP button. 2. Use or button to select Audio, press the ENTER button. 3. Use or button to select Digital Out, and then press the ENTER button repeatedly to select Digital Out type. 4. T o exit the FUNCTION SETUP MENU and retur n to the normal screen, press the RETURN button.
E - 31 (continued on next page) (continued on next page) (continued on next page) (continued on next page) (continued on next page) Subwoofer 1. Press the SETUP button. 2. Use or button to select the Audio, press the ENTER button. 3. Use or b utton to Subwoofer , and then press the ENTER button.
E - 32 Pink noise 1. Press the SETUP button. 2. Use or button to select the Audio, press the ENTER button. 3. Use or button to Pink noise, and then press the ENTER button. 4. Use or button to select the desired setting, and then press the ENTER button.
E - 33 Customizing the Function Settings RA TING setting Password/Parental lock D VD discs equipped with the passw ord function are rated according to their content. The contents allow ed by a parental lock le vel and the wa y a D VD disc can be controlled may v ar y from disc to disc.
E - 34 Factory Set If you want to return the initial language setting to the factory default, do the following: 1. Press the SETUP button. 2. Use or button to select the Rating, then press the ENTER button. 3. Use or button to shift and select the F actor y Set, then press the ENTER button.
E - 35 T uning into a station man ually 1. Press the FUNCTION button until the frequency band appears on the display . 2. Press the BAND button on the remote remote or STOP button on the front panel to select the desired band. 3. Press the TUNING button to tune in the desired station.
E - 36 Code AA AB AF AM AR AS AY AZ BA BE BG BH BI BN BO BR CA CO CS CY DA DE DZ EL EN EO ES ET EU FA FI FJ FO FR Code FY GA GB GL GN GU HA HI HR HU HY IA IE IK IN IS IT IW JA JI JW KA KK KL KM KN KO .
E - 37 Cleaning the Unit • Be sure to turn the Unit off and disconnect the AC power cord before maintaining the Unit. • Wipe the Unit with a dry soft cloth. If the surfaces are extremely dirt y , wipe clean with a cloth which has been dipped in a weak soap-and-water solution and wrung out thoroughl y , then wipe with a dry cloth.
E - 38 SYMPTOM CAUSE (AND REME DY) • Check that the speakers and equipment are connected securel y. • Make sure that you've selected the corrected equipment on the system. • The system is in pause mode or in Slow-motion Play mode . Press the PL AY button to return to normal play mode.
Un punto importante, dopo l’acquisto del dispositivo (o anche prima di acquisto) è quello di leggere il manuale. Dobbiamo farlo per diversi motivi semplici:
Se non hai ancora comprato il Venturer STS91 è un buon momento per familiarizzare con i dati di base del prodotto. Prime consultare le pagine iniziali del manuale d’uso, che si trova al di sopra. Dovresti trovare lì i dati tecnici più importanti del Venturer STS91 - in questo modo è possibile verificare se l’apparecchio soddisfa le tue esigenze. Esplorando le pagine segenti del manuali d’uso Venturer STS91 imparerai tutte le caratteristiche del prodotto e le informazioni sul suo funzionamento. Le informazioni sul Venturer STS91 ti aiuteranno sicuramente a prendere una decisione relativa all’acquisto.
In una situazione in cui hai già il Venturer STS91, ma non hai ancora letto il manuale d’uso, dovresti farlo per le ragioni sopra descritte. Saprai quindi se hai correttamente usato le funzioni disponibili, e se hai commesso errori che possono ridurre la durata di vita del Venturer STS91.
Tuttavia, uno dei ruoli più importanti per l’utente svolti dal manuale d’uso è quello di aiutare a risolvere i problemi con il Venturer STS91. Quasi sempre, ci troverai Troubleshooting, cioè i guasti più frequenti e malfunzionamenti del dispositivo Venturer STS91 insieme con le istruzioni su come risolverli. Anche se non si riesci a risolvere il problema, il manuale d’uso ti mostrerà il percorso di ulteriori procedimenti – il contatto con il centro servizio clienti o il servizio più vicino.
