Manuale d’uso / di manutenzione del prodotto Osiris MX-3500 del fabbricante Universal Remote Control
Vai alla pagina of 60
Owner ’ s Manual.
Osiris Owner’s Manual © 2004 Universal Remote Control, Inc. The information in this manual is copyright protected. No part of this manual may be copied or reproduced in any form without prior written consent from Universal Remote Control, Inc. UNIVERSAL REMOTE CON- TROL, INC.
1 T able of Contents Getting Started 2 Button Layout 3 Basic Setup 5 Pre-Programmed Method 5 Learning Method 9 V olume Control Punch Through 12 Advanced Operation 14 Advanced Setup 16 Editing Button L.
2 Getting Started Congratulations! You’ve purchased one of the most advanced and easy to setup control sys- tems available. The Osiris’s built-in library includes thousands of different brands and models of remote controls. In most systems, all you have to do to setup the Osiris is enter which brands and models you own.
3 MAIN Button takes you to the MAIN Menu. Screen Labeled Display Buttons LIGHT Button PAGE Numbers FUNCTION Buttons TITLE FAVORITE CHANNEL Button PAGE Buttons change the page of Display Buttons.
4 The Osiris Selecting a New DEVICE Changes All Button Commands Instantly The Osiris can operate ten different devices even though it is only one remote control. Let’s try it now! Press the MAIN button, then press the TV DEVICE button. The top of the screen changes from MAIN to TV.
5 Basic Setup You can start setting up your Osiris using either the Pre-Programmed Method or the Learning Method. However, all the buttons of the Osiris are setup at once with the Pre-Programmed Method, so it is usually faster than the one-button-at-a-time Learning Method.
6 Press the P-PRO button to select the Pre-Programmed Method. The display changes so that you can select which Device button to setup. In this step you choose the name of the device you’d like to setup. Use the cursor UP or DOWN buttons to change the flashing name.
7 In this step you verify the type of component you plan to operate with this device button. If the flashing name is correct, press SELECT. If the name flashing in the display is incorrect (for example, you are setting up AUX to operate a Laser Disc Player), use the UP and DOWN buttons to change the flashing name to the correct type of component.
8 Note: If a component fails to turn off after you have entered all of the code numbers listed for your brand, you can scan through the other brands in the table using the UP and DOWN buttons to chang.
9 Repeat steps one through nine for each of your devices. If you are missing any commands, use the learning method, described next Learning Method The Osiris can learn commands from your old remote controls one-but- ton-at-a-time by following these simple steps: Line-up the Osiris with your old remote control, head-to-head, one or two inches apart.
The display will show a list of the first five devices. Select the device you would like to teach commands to by pressing the Device button. Now, press any button you want to teach a command to. Note: If you don’t see the display button you would like to teach, use the PAGE buttons.
11 Press and hold the button you want on your old remote control until the display changes to either “GOOD” or “FAILED”. If the “GOOD” label appears on top of the display, you were successful. Now, press the next button you wish to teach. Keep repeating steps 6 through 7 until you have learned all the buttons you want.
V olume Control Punch Through In most home entertainment systems, the sound volume is only con- trolled by one device. In some systems, it is the TV speakers that make the sound, so you would use the TV device on the Osiris to raise and lower the volume.
13 Press the device button for the device that doesn’t have volume control commands yet (i.e.,DVD). This is the device you are going to PUNCH TO for the volume and mute commands. Note: If you wish to PUNCH to the MAIN device, press the POWER OFF button at this time.
14 Advanced Operation Setting Backlight Options You can adjust the amount of time that the Osiris backlight stays on by entering the SETUP mode and proceeding to page two (using the PAGE UP button), then pressing the LIGHT button on the display (not the Backlight button).
15 Adjusting Contrast You can make the text darker by pressing both the MAIN and cursor UP buttons at the same time. To make the text appear lighter, press both the MAIN and cursor DOWN buttons at the same time. T ransmitting (Busy Signal) Icon When a command is being transmitted, an icon will appear in the top right corner of the display.
16 Advanced Setup After you’ve finished all your basic setup, you can choose to make opera- tion easier by customizing the Osiris just the way you want, using the Advanced Setup features described in this section.
17 Press the button you wish to edit. The first character of your button label blinks. 5 Blinking Character EDIT flashes at the bottom of the screen. Universal Remote Control, Inc. A,B,C,1 D,E,F,2 G,H,I,3 J,K,L,4 M,N,O,5 P,Q,R,6 S,T,U,7 V,W,X,8 Y,Z,9 DOWN Cursor button deletes the currently blinking character.
18 When you are finished editing the button, press the button you edited and “SAVED” will flash at the bottom of the display. To change any other button labels on the same device, press the next button, then repeat steps 6-8. If you wish to edit a button on another device, press the MAIN button once, then repeat Steps 4-8.
19 Macro Button Setup Imagine turning on your TV, your DVD player and your surround sound receiver by pressing a single button on your Osiris! What would nor- mally take three remotes and three button pushes, the Osiris can accomplish with the press of one button.
20 Navigate to the Device and Page that has a button you want in your macro using the MAIN, DEVICE and PAGE buttons. Then press the button with the command you want. Whenever a button is pressed, another Macro step is counted and displayed at the bottom of the screen.
21 Favorite Channel Setup Imagine surfing all your favorite channels, without ever typing in a channel number. By simply setting up each of the favorite channel but- tons, you can make TV, cable or satellite operation fun and easy.
22 Note: If a number is repeated when setting the channel (for example,channel “33” or “522”) it is usually best to set a half second delay in between the identical numbers by pressing the PAUSE button. Each press of the PAUSE button increases the delay by a half second.
23 Hiding and Adding Pages Each of your Osiris Devices actually contains eight pages. However, only five pages are visible in the factory default setting. Three pages are hid- den in each device. If you wish to use the hidden pages, you can ADD them. If you don’t want to use some of the existing pages, you can HIDE them.
24 Navigate to any page, using the MAIN, DEVICE, FAV, and PAGE but- tons. When you select a page, the top of the screen indicates whether you want to “ADD?” or “HIDE?” the page dis- played. When you would like to change a page’s visibility, press the LIGHT button.
25 Erasing You can erase an individual button with a learned command, a macro or a favorite channel. You can erase an entire Device’s learned com- mand or macro buttons. You can also erase ALL your learned com- mands on all devices or all your macros or favorite channels every- where.
26 Erasing the Entire Osiris To erase EVERYTHING, press and hold both the MAIN and the STOP buttons for 15 seconds. After 15 seconds, the RESET screen appears. Press the SURE button to erase all of your settings and return to the fac- tory default setup.
27 Recalling Pre-Programmed Settings If you didn’t write down the code numbers you setup your Osiris with, you can recall them via this simple process: Enter SETUP mode by pressing and holding both MAIN and ENT for three seconds. Note: You have 30 seconds for each step, otherwise the Osiris will time out automatically.
28 Utilizing Optional RF Base Stations You can use the Osiris as you would your other remote controls. It trans- mits very powerful line-of-sight output using infrared light commands (invisible to the naked eye). When you point the Osiris at the components, expect the range to be between 30 and 50 feet.
29 Universal Remote Control, Inc. The RF Base Station converts radio signals to stan- dard infrared commands and sends them out via a built-in front blaster to components in the same cabinet space. The Osiris sends radio signal to the MRF-100, MRF-250 or the MRF-300 RF Base Stations.
30 RF Settings Overview The Osiris is factory set to work out of the box with an MRF-100 base sta- tion, which is not addressable. The only setting that affects operation with an MRF-100 is the RF/IR setting (to operate, the Osiris must be set to IR/RF or RF- it will not operate the MRF-100 in IR mode).
31 Press the RF button. The RF Settings Menu appears. See the notes on the following pages for more info on each option. Make your selection by press- ing the button you want: After you’ve made a new setting and SAVED your change, use the EXIT button to return to the RF settings menu to change any other setting.
32 From the RF Settings Menu, select IR/RF. Decide whether you are changing the Signal for all devices or just one of the devices of the Osiris. Select ALL to change the signal settings to ALL devices in the Osiris. Then, go to Step 4. Select DEVIC to change the signal settings to just one of the devices in the Osiris.
33 When you are installing a system within 100 feet of another equipment location in the same home OR near a home, condo, yacht or motor home that might potentially have an RF remote control of any kind, it is recommended that you use an addressable base station and set the address as described here.
Select the new setting by pressing the desired button, then press SAVE to save your new setting and return to the RF settings menu. EMITT - Setting IR Emitter Outputs The MRF-250 and MRF-300 Base Stations enable you to route or steer the IR commands from any Device to any or all of the IR Line Outputs.
The display changes to a list of the names of your devices. If you have two pages of devices, pressing either of the page buttons will display the other page.
From the RF Settings Menu, select BLAST. Decide whether you are changing the Blaster for all devices or just one of the devices of the Osiris. Select ALL to change the blaster settings to ALL devices in the Osiris. Then, go to Step 4. Select DEVIC to change the blaster settings to just one of the devices in the Osiris.
37 Pre-Programmed Code T ables The Osiris’s Pre-Programmed code library is divided into categories (TV, VCR, AUX, etc.). Each category actually includes many types of components. For example, the VCR category includes TV/VCR combo units. Within each category, the code numbers are listed in rows by brand (Sony, Panasonic, B & K, etc.
38 ADMIRAL 072 081 161 160 ADVENT 247 AKAI 197 146 248 A MARK 112 143 AMPRO 167 073 157 183 AMSTRAD 052 ANAM 043 054 056 080 112 131 AOC 197 004 112 058 APEX DIGITAL 006 AUDIOVOX 076 BARCO 233 BLAUPUN.
39 TV (continued) - TVs, Plasmas, Projectors and Monitors KTV 043 197 143 154 LG 113 116 102 004 106 112 119 127 143 243 284 LODGENET 072 LOEWE 164 LOGIK 072 LUXMAN 004 LXI 166 007 015 052 081 160 164.
40 BRAND CODE NUMBERS TV (continued) - TVs, Plasmas, Projectors and Monitors TATUNG 056 062 TECHNICS 034 080 TECHWOOD 004 TEKNIKA 002 003 004 024 028 043 072 101 143 TELEFUNKEN 037 046 086 087 TELEREN.
41 BRAND CODE NUMBERS CABLE (continued) - Cable Set T op Boxes ECHOSTAR 106 ELECTRICORD 032 GEMINI 008 054 GENERAL ELECTRIC 072 GENERAL INSTRUMENT 074 103 104 GNC 099 GOLDEN CHANNEL 030 HAMLIN 049 050.
42 BRAND CODE NUMBERS DVD-DVD Players AIWA 146 ALPINE 098 APEX DIGITAL 087 111 115 DENON 007 080 173 FUNAI 143 GE 026 027 GO VIDEO 137 HARMAN KARDON 084 140 HITACHI 101 INTEGRA 142 180 JVC 012 KENWOOD.
43 MAGNAVOX 143 PANASONIC 144 SYLVANIA 143 TOSHIBA 164 GO VIDEO 137 PANASONIC 150 PHILIPS 105 (VCR Functions for VCR 067) SAMSUNG 137 159 SANSUI 154 SONY 145 191 TOSHIBA 141 ZENITH 091 (VCR Functions .
44 BRAND CODE NUMBERS DVD (continued) - Laser Disc Players TOSHIBA 152 106 YAMAHA 043 129 AIWA 034 161 AKAI 016 146 043 046 124 125 142 AMPRO 072 ANAM 031 AUDIO DYNAMICS 012 023 039 043 BROOKSONIC 035.
45 ORION 025 PANASONIC 066 070 145 083 133 140 157 163 074 167 PENTAX 013 020 031 063 PHILCO 031 034 067 PHILIPS 031 067 034 101 054 071 156 PILOT 101 PIONEER 021 013 048 PORTLAND 108 PULSAR 072 QUART.
46 BRAND CODE NUMBERS VCR (continued) - TV/VCR Combos FUNAI 034 GOLDSTAR 101 123 HITACHI 034 JCPENNEY 101 LG 101 123 LLOYD 034 MAGNAVOX 034 067 MEMOREX 101 PANASONIC 070 167 PHILIPS 034 067 RADIO SHAC.
47 BRAND CODE NUMBERS AUDIO (continued) - Receivers, Amps, Preamps and T uners DELPHI 415 515 DENON 002 034 109 215 229 230 027 037 234 259 330 340 341 349 350 400 401 402 444 EIGER 149 ELAN 057 290 E.
48 AUDIO (continued) - Receivers, Amps, Preamps and T uners BRAND CODE NUMBERS PIONEER 014 033 039 044 045 050 069 159 168 116 035 078 198 480 POLKAUDIO 029 PROCEED 144 268 RCA 010 048 117 156 067 288.
49 BRAND CODE NUMBERS S A T (continued) - Satellite Receivers and DSS PANSAT 172 PAYSAT 136 PHILIPS 152 153 156 068 154 136 108 117 PROSCAN 151 106 150 RADIOSHACK 148 RCA 151 106 150 SAMSUNG 123 155 1.
50 BRAND CODE NUMBERS C D (continued) - C D Changers and Players LUXMAN 011 028 070 076 249 252 LXI 059 MAGNAVOX 044 107 MARANTZ 027 041 044 051 077 107 209 246 MCINTOSH 212 247 MCS 014 073 092 MEMORE.
51 BRAND CODE NUMBERS DVR - TiV o, Replay and other Digital V ideo Recorders ECHOSTAR / DISH 122 HUGHES 108 117 JVC 122 PHILIPS 108 090 117 RCA 109 REPLAY NETWORKS 075 SONY 104 105 TIVO 090 117 AIWA 0.
52 BRAND CODE NUMBERS AUX (continued) - Custom Installation Products AURORA MULTIMEDIA 220 AUTON 191 CELADON 221 CRESTRON 213 214 215 216 217 218 DELL 261 262 DMX 156 DRAPER SCREEN 204 DREAMVISION 097.
53 Frequently Asked Questions What is a “macro” button? It is an Osiris button you set to make a lot of things happen when you press it. For example, to watch a DVD in most home theaters requires .
54 W arranty The Osiris is covered against any manufacturers defects or workmanship for a period of one year from the date of purchase if purchased from an authorized Universal Remote Control dealer. Units purchased from online auction sites or other unauthorized resellers have no warranty.
55 MEMO.
56 MEMO.
57 MEMO.
OCE-0024B Rev. 03 500 Mamaroneck Avenue, Harrison, NY 10528 Phone: (914) 835-4484 Fax: (914) 835-4532.
Un punto importante, dopo l’acquisto del dispositivo (o anche prima di acquisto) è quello di leggere il manuale. Dobbiamo farlo per diversi motivi semplici:
Se non hai ancora comprato il Universal Remote Control Osiris MX-3500 è un buon momento per familiarizzare con i dati di base del prodotto. Prime consultare le pagine iniziali del manuale d’uso, che si trova al di sopra. Dovresti trovare lì i dati tecnici più importanti del Universal Remote Control Osiris MX-3500 - in questo modo è possibile verificare se l’apparecchio soddisfa le tue esigenze. Esplorando le pagine segenti del manuali d’uso Universal Remote Control Osiris MX-3500 imparerai tutte le caratteristiche del prodotto e le informazioni sul suo funzionamento. Le informazioni sul Universal Remote Control Osiris MX-3500 ti aiuteranno sicuramente a prendere una decisione relativa all’acquisto.
In una situazione in cui hai già il Universal Remote Control Osiris MX-3500, ma non hai ancora letto il manuale d’uso, dovresti farlo per le ragioni sopra descritte. Saprai quindi se hai correttamente usato le funzioni disponibili, e se hai commesso errori che possono ridurre la durata di vita del Universal Remote Control Osiris MX-3500.
Tuttavia, uno dei ruoli più importanti per l’utente svolti dal manuale d’uso è quello di aiutare a risolvere i problemi con il Universal Remote Control Osiris MX-3500. Quasi sempre, ci troverai Troubleshooting, cioè i guasti più frequenti e malfunzionamenti del dispositivo Universal Remote Control Osiris MX-3500 insieme con le istruzioni su come risolverli. Anche se non si riesci a risolvere il problema, il manuale d’uso ti mostrerà il percorso di ulteriori procedimenti – il contatto con il centro servizio clienti o il servizio più vicino.
