Manuale d’uso / di manutenzione del prodotto MS840 del fabbricante Unitech
Vai alla pagina of 60
Wireless Scanner - MS840/MS084 - User ’ s Manu al V ersion 1.1.
.
i Preface About This Manual This manual explains how to install, operate and maintain the MS840 Wireless Scanner. No part of this publication may be reproduced or used in any form, or by any electric .
ii Regulatory Compliance S t atement s FCC W ar ning St atement This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 o f the FCC rules. These li mits are designed to provide reasonable protection against harmful interference in a residential inst allation.
iii European Conf ormity St atement Declaration of Conformity with regards to the R&TTE 1999/5/EC and EMC 89/336/ EEC directives. RoHS St atement This device conforms to RoHS (Reduction Of Hazardous Substance s) European Union regulations that set maximum concentration limits on hazardous materials used in electrical and electronic equipment.
iv Battery Notices The MS840 is equipped with a Lithium -Ion battery . The battery will discharge after an extended period of no use. W hen the battery is discharged, recharge the unit for some 4.
v W arranty The following items covered under the Unitech Limited Wa rranty are free fro m defects duri ng normal use: MS840/MS084 – 1-year limited warranty .
vi.
i Table of Contents PREF ACE A BOUT THIS M ANUAL .............................................................................................................. I Regulatory Compliance St ateme nt s .....................................................
ii Inventory Mode ................................................................................................................. 13 LED / Beeper Indication for Scanner ................................................................................
iii A PPENDIX A QUICK SETUP SHEET ................................................................ ............................................ 30 A PPENDIX B FUNCTION CODES .............................................................................
iv.
1 Chapter 1 Overview Introducing the MS840/MS084 First of all, thank you for choosing Unitech‘ s product s. This scanner has cap ability of precise barcode scanning, reconnecting automatically a fter of f -line in a long transmitting distance.
2 Package Content s Please make sure the following contents are in the MS840 package box . If something is missing or damaged, please cont act your Unitech represent ative.
3 [ Scanner Body A spect ] 1 LED indicator 2 Scanner Grip 3 Laser Exit W indow 4 Trigg er 5 Scanner Contact Points for Charge 6 Reset Pinhole [ Cradle A spect ] 1 Antenna 2 Comm unication S tatus LED .
4 Note: 1. If you remove the wedge and flip i t upsi de down, it ac ts as a clip to hold up the scanne r when the base is mounted to the wal l. 2. The cradle foo t serves for table mount whe n being f.
5 Chapter 2 Battery Charging and Co nnection Cradle Mode, Battery Charging The battery is in advance loaded into the compartment of th e scanner and m ay not be fully charged before shipment. W hen you r eceive the package and use the MS840 for the first time, you will need to fully charge the battery .
6 3. Place the scanner in the cradle. T he scanner LED will be red to indicate charging. W hen the scanner is charged, the LED will turn of f. Cradle Mode, Connection Cradle Mode ( w ith SCM support) .
7 W all-Mount Inst all ation of a Crad le Before mounting the cradle onto the wall, read the instruction made below . Mounting Kit (Optional article 4070 -900011G ) If you want to mount the MS840 cradle onto the wall, an iron plate, tw o screws, and two plastic conical anchors are required.
8 Follow the steps below to mount the cradle onto the wall. S tep 1 : Loose a nd remove 2 screws f rom the stand of cradle by using a screwdriver . Then, remove the stan d from the cradle. S tep 2: Move the stand of cradle to the lower portion of the cradle from the upper portion adjacent to the antenna.
9 S tep 4: Place the iron plate against the wall, and mark the 2 screw hole locations with a pen or pencil. Drill the screw locations somewhat deep. Insert 2 plastic conical anchors into the screw holes. Attach and secure the plate to the wall with the 2 screws.
10 Cradle-less, Battery Charging T o charge the scanner w ithout a crad le, follow the instructions below: 1. Plug the adapter cable into the power socket of the foot of scanner . 2. Plug the AC adapter cord into an electrical outlet. Now , check whether the scanner LED will be bright in solid red during charging.
11 6. At this step, re ferring to the ba rcode tab le below , scan the pin code one after another you got from your PC; for exa mple, if you get the pin code ― 241657 ‖ , then scan the barco des ― 2 ‖ – ― 4 ‖ – ― 1 ‖ – ― 6 ‖ – ― 5 ‖ – ― 7 ‖ listed in the t able in the order .
12 7. After you finish in scanning the pin c ode, scan the barcode as shown below : CR($M) 8. W hen t he pairing is successful, the scanner LED is off and ha s a short beep. The scanner will operate as HID (keyboard) tow ards host. Note: Scanning the DLE($P) will erase the previous entered link keys.
13 Memory Buffer Setting The collected data can be sent back to a host computer one by one via the W PAN connection as the scanner is set to the Batch Mode, or can be stored in the f lash memory of the scanner being set to the Inventory M ode. By default, the Batch Mode is enabled for use when the scanner is out of range.
14 Bear in mind the fact that the scanner operating in the inventory mode does not sent out the scanned data automatically but keeps the data in its memory buffer.
15 LED / Beeper Indication for Scanner LED Indication for Scanner The LED lights on the MS840 scanner turn on to indicate the st atus of the battery , a successful read of a barcode, or the status of the wireless connection. MS840 Lights: Th e sta tus LED turns green, blue, or red to indicate the status of the battery and scanning.
16 Chapter 3 Barcode Setting The scanner interface can be configured to fit the user's speci fic application. All configuration paramete rs are stored in a non-volatile memory , which is retained even if power is lost. Barcode Menu Setting The setup menu in A ppendix D contains eig ht groups: * Group 1: Device selection.
17 Barcode Length Setting The following example illustrates how to set Code 39 with a minimum length of 5 and a maximum length of 20. * Scan ―Enter Group 7‖. * Scan ―F1‖ to select Code 39. * Scan ―MIN LENGTH‖ to enter minimum length setting.
18 Those ID characters can be redefined through setup menu. The following example shows how to set Code 93 with ID ‗O‘ and Code 128 without ID: * Scan ―Enter Group 5‖. * Scan ―D2‖ to select Code ID. * Scan ―1‖ for "Enable". * Scan ―D3‖ to define IDs.
19 * Scan ―B7‖ to end ―Label 2‖ * Scan ―Exit‖ to quit setup After programming, sc anning ―Label 0‖, ―Label 1‖ , and ―Label 2‖ listed above will have the output of ―ST ART‖, ―ACCEPT‖ , and ―END‖ , respectively . The characters defined in these labels can be ASCII characters or Function keys.
20 Print into Code 39 bar code labels: . . . I 8 0 0 C 0 6 D 5 1 D J 8 0 8 0 8 0 A 0 O 7 C 0 0 5 3 5 4 4 1 5 2 5 4 . By scanning the labels from top to bottom sequentially , you may duplica te the rest of scanners with the same settings. The following issues should be observed: The sequence of the strings that the scanner dumped is important.
21 Scanner Configuration Manager Sof tw are Scanner Configuration Manager is a utility program de signed for users to configure scanner settings on a computer by using the Microsoft W i ndows based operating system. Use this program to define the settings and then dow nload the parameters to the scan ner .
22 Chapter 4 Output Data Editing The Output Data Editing feature was removed from this barcode setup manual. It is implemented to the Scanner Configuration Manager So ftware providing a u ser-friendly interface for easier operation. Please download the latest program from Unitech‘ s web site at http://www .
23 Formula S tructu re Programming Programming Seq uence Each Formula is entered into the reader by the following sequence: Input_ID >> Length >> Match >> A- String >> O-S tring >>...>> O-String >> Enter A Formula start s with Input_ID and ends w ith ― Enter” (a label in programming sheet).
24 Programming She et The bold and italiciz ed characters in following sections mean a barco de label on the Programming Sheet. Enter Group 10 Scan this label to start the formula input. Group Default Erase all formulas. Review T o see the formulas programmed in the Wedge.
25 Here * and # are wild characters on the setup sheet. Qualifier There are three conditional fields in the Qualifier: Input ID, Length and Match. Input ID Format: IN_ID ,ID1, ... , IDi, Input ID is required and the original data record must correspond to Input ID of a formula in order to be processed.
26 Match Format: MA TCH , P0 , " C0 " , P1 , " C1 " , ... , Pn , " Cn " , A pair of Pn and Cn forms a Match fi eld (n indicates a sequential integer number). T o define a Match field, two parameters are required. T he first is character position (Pn) and the second is a string (Cn).
27 O-Str ing Format: O-STR , P , N, O-S tring always applies to the original data. It cont ains two para meters. The first is position parameter (P) that spe cifies the start output position in the orig inal data. Parameter N tells how many characters will be included beginning from P .
28 Both parameters o f O -S tring mentioned above are numbers. But both param eters can be specified as strings. If N is a string, it becomes a position and the meaning of O-String wil l be "Output from position P to position N". If P is de fined as: " ab.
29 The output of above input will be ABEL,STEVE[CR] 012345678901234[CR] 9001[CR].
30 Appendix A Quick Setup She et Scanner Mode Tri g ge r F l a sh UPC-E D e fa u lt C u t L e a di n g D i g it S e n d C h e ck D ig it U P C - A C o n v e rsi o n EAN -8 D e fa u lt C u t L e a d in.
31 Appendix B Fun ction Codes Function Codes for PC F1 (%V A) F3 (%VC) F5 (%VE) F7 (%VG ) F9 (%VI ) F1 1 (%VK) Cursor Right (/F C) Cursor Up (/F E) PgUp (/FG ) T AB (/FI) Esc (/FK ) Right Ctrl (/F O) .
32 F1 (%V A) F2 (%VB) F3 (%VC) F4 (%VD) F5 (%VE) F6 (%VF ) F7 (%VG ) F8 (%VH) F9 (%VI ) F10 (%VJ) F1 1 (%VK) F12 (%VL ) F13 (%VM) F14 (%VN) F15 (%VO) Cursor L eft (/FD) Cursor Right (/F C) Cursor Dow .
33 Reset (/FV ) Function Codes for IBM T erminals F1 (%V A) F3 (%VC) F5 (%VE) F7 (%VG ) F9 (%VI ) F1 1 (%VK) F13 (%VM) F15 (%VO) F17 (%VQ) F19 (%VS) F21 (%VU) F23 (%VW) Home (/F A) T AB (/FI) Return (.
34 Appendix C Setup Menu D. 1 Beeps and Del ays Enter Group 2 Group Default 0 1 2 3 4 5 6 7 8 9 Beep T one: 0 – None 1 -- Low 2 -- Medium 3 -- High 4 -- Low to High 5 -- High to Low A 1 Interblock D.
35 D. 2 Ke y board Wedge Settings Enter Group 3 Group Default 0 1 2 3 4 5 6 7 8 9 Function Code : 0 -- Of f 1 -- ON B 1 Cap s- Lock: 0 – A uto T race(PC/XT , A T) 1 – Lower Case 2 – Upper Case B 2 Language (For PC/XT/A T): 0-U.S. 5-Norwegian :-Danish 1-U.
36 D. 3 RS232 Settings Enter Group 4 Group Default 0 1 2 3 4 5 6 7 8 9 Baud Rate: 0 -- 300 4 – 4800 1 -- 600 5 – 9600 2 -- 1200 6 – 19200 3 – 2400 7 – 38400 C1 Parity: 0 – Even 3 -- S pace.
37 D. 4 Scanner Port Enter Group 5 Group Default 0 1 2 3 4 5 6 7 8 9 T erminator: 0 — Enter 1 -- Return (on digits keypad) 2 -- Field Exit or Right Ctrl 3 -- None D 1 Code ID: 0 – dis able 1 – En able Note: This setting doesn‘t affect EAN128 Code ID .
38 D. 5 Operating Modes Enter Group 6 Group Default 0 1 2 3 4 5 6 7 8 9 Buffer Mo de 0 — Disabled 1 — Inventor y Mo de 2 — Batch M ode E 1 Reserve E 2 Buffer T ransmit delay 0 — 50ms 1 — 100.
39 D. 6 Code 39 / I 2 of 5 / S 2 of 5 / Code 32 / EAN128 Enter Group 7 Group Default 0 1 2 3 4 5 6 7 8 9 Code 39: 0/ 1 -- Disable/ Enabl e. 2/ 3 -- Full A SCII / S t andard. 4 -- Check Digit (CD) Calcu late & Send. 5 -- CD Calculate, not send. 6 -- CD not Calculate.
40 D. 7 Code 128 / MSI Code / Code 93 / Codabar/ Label Code Enter Group 8 Group Default 0 1 2 3 4 5 6 7 8 9 Code 128: 0/ 1 -- Disable/ Enable 1- 64 -- Min Length 1 / Max Length 64 G 1 MSI /Plessey Cod.
41 D. 8 UPC / E A N / Delt a Code Enter Group 9 Group Default 0 1 2 3 4 5 6 7 8 9 UPC- A: 0/ 1 -- Disable/ Enable 2 /3 -- Leading Digit Se nd / No Send 4 /5 -- Check Digit Send / No Send H1 UPC- E: 0/.
42 D. 9 Dump Setup Strings See the section Batch Setup fo r how to use the labels below . Dump Settings Dump Settings on PC/A T (Speed=9600,Databit=8,Parity = None, S top=1 Flow Control = None) RS232 .
43 Appendix D Full ASCII Chart Characters in parentheses represent Code 39 barcode printing NUL (%U) SOH ($A) STX ($B) ETX ($C) EOT ($D) ENQ ($E) ACK ($F) BEL ($G) BS ($H) HT ($I) LF ($J) VT ($K) FF (.
44 RS (% D) US (%E) SP ! (/A) ” (/B) # (/C) $ % & (/F) ’ (/G) ( (/H) ) (/I) * (/J) + , (/L) - . / 0 1 2 3 4 5 6 7 8 9 : (/Z) ; (%F) < (%G) = (%H) > (%I).
45 ? (%J) @ (%V) A B C D E F G H I J K L M N O P Q R S T U V W X Y Z [ (%K) (%L) ] (%M) ^ (%N) _ (%O).
46 ` (%W) a (+A) b (+B) c (+C) d (+D) e (+E) f (+F) g (+G) h (+H) i (+I) j (+J) k (+K) l (+L) m (+M) n (+N) o (+O) p (+P) q (+Q) r (+R) s (+S) t (+T) u (+U) v (+V) w (+W) x (+X) y (+Y) z (+Z) { (%P) |.
47 Appendix E Barcode Test Cha rt EAN-13 3 0 4 5 2 1 4 8 3 4 1 2 3 EAN-8 8 0 1 2 3 4 5 3 UPC-A UPC-E 0 2 1 2 3 4 5 7 9 9 ISBN 957-630-239-0 9 7 8 9 5 7 6 3 0 2 3 9 8 0 7 2 0 0 Interleaved 2 of 5 0987 .
48 Appen dix F Worldwide Support Unitech‘s professional support team is available to quickly answ er questions or technical-related issues. Should a set of equipment problem occur s, please cont act the nearest Unitech regional service representativ e.
Un punto importante, dopo l’acquisto del dispositivo (o anche prima di acquisto) è quello di leggere il manuale. Dobbiamo farlo per diversi motivi semplici:
Se non hai ancora comprato il Unitech MS840 è un buon momento per familiarizzare con i dati di base del prodotto. Prime consultare le pagine iniziali del manuale d’uso, che si trova al di sopra. Dovresti trovare lì i dati tecnici più importanti del Unitech MS840 - in questo modo è possibile verificare se l’apparecchio soddisfa le tue esigenze. Esplorando le pagine segenti del manuali d’uso Unitech MS840 imparerai tutte le caratteristiche del prodotto e le informazioni sul suo funzionamento. Le informazioni sul Unitech MS840 ti aiuteranno sicuramente a prendere una decisione relativa all’acquisto.
In una situazione in cui hai già il Unitech MS840, ma non hai ancora letto il manuale d’uso, dovresti farlo per le ragioni sopra descritte. Saprai quindi se hai correttamente usato le funzioni disponibili, e se hai commesso errori che possono ridurre la durata di vita del Unitech MS840.
Tuttavia, uno dei ruoli più importanti per l’utente svolti dal manuale d’uso è quello di aiutare a risolvere i problemi con il Unitech MS840. Quasi sempre, ci troverai Troubleshooting, cioè i guasti più frequenti e malfunzionamenti del dispositivo Unitech MS840 insieme con le istruzioni su come risolverli. Anche se non si riesci a risolvere il problema, il manuale d’uso ti mostrerà il percorso di ulteriori procedimenti – il contatto con il centro servizio clienti o il servizio più vicino.
