Manuale d’uso / di manutenzione del prodotto 1380BK del fabbricante Uniden
Vai alla pagina of 44
User ’ s Guide Model 1380 Speakerphone T elephone with Digital Answerer and Caller ID on Call W aiting.
2 Important Information NOTICE: This product meets the applicable Industry Canada technical specications. Operation is subject to the following two conditions: (1) This device may not cause interference, and (2) This device must accept any interference, including interference that may cause undesired operation of the device.
3 likely give you adequate notice to allow you to maintain uninterrupted service. Notice must be given to the telephone company upon termination of your telephone from your line. REN Number On the bottom of this equipment is a label indicating, among other information, the Ringer Equivalence Number (REN) for the equipment.
4 T able of Contents Important Information ..................2 Interference Information ..............2 T elephone Network Information ..2 REN Number .................................3 Hearing Aid Compatibility ............3 Licensing ................
5 If Y ou Programmed Y our Local Area Code ........................................... 24 If Y ou Did Not Program Y our Local Area Code .................................. 25 Memory ........................................26 Storing a Number in Memory .
6 T elephone Jack Requirements T o use this phone, you need an RJ1 1C type modular telephone jack, which might look like the one pictured here, installed in your home. If you don’t have a modular jack, call your local phone company to nd out how to get one installed.
7 Important Installation Information • Never install telephone wiring during a lightning storm. • Never touch non-insulated telephone wires or terminals, unless the telephone line has been disconnected at the network interface. • Use caution when installing or modifying telephone lines.
8 Base Layout delete (button) memo (button) store (button) menu (button) ans on/off (button) announce (button) VOL+/- (buttons) ash/exit (button) redial/pause (button) Hook switch skip (button) Mic.
9 Installing the Phone Desktop Installation CAUTION: T o reduce risk of personal injury , re, or damage use only the 5-2784 power adaptor listed in the user ’ s guide. This power adaptor is intended to be correctly orientated in a vertical or oor mount position.
10 Y our speakerphone can also be mounted on a wall plate (not included). Note: T o prevent the handset from falling out of the cradle while the phone is hanging on the wall, you must switch both the handset hook and the desk stand to their wall-mount positions.
1 1 Answerer: T o move the answerer to a different location in the house, follow these instructions: 1. Disconnect the phone line. 2. Go to the electrical outlet and unplug the power adaptor . 3. Move the unit and phone line to the desired location. 4.
12 • T o return to the answerer ’ s default greeting after you’ve recorded one, press ANNOUNCE and release it when you hear the tone, or press and hold DELETE when the greeting is playing. Reviewing the Announcement Pre ss a nd r eleas e th e ANNOUNCE b utton to revi ew y our o utgo ing anno uncem ent.
13 Receiving a Phone Call 1. When the phone rings, the speakerphone indicator blinks and the caller ’ s information, if any , will be shown on the display panel. Lift the handset or press the SPEAKER button to connect your phone call. 2. Y ou can adjust the volume of the caller ’s voice by pressing the VOL (+ or -) buttons.
14 Flash Press the FLASH button instead of using the hook switch to activate customer calling services such as call waiting or call transfer , which are provided by your local phone company . Redial Redial the last number you called by pressing the REDIAL button after you get a dial tone.
15 T elephone Set Up Y ou can customize the following settings to suit your needs. Rings to Answer Selects the number of rings before the unit answers. Messag e Length Sets the lengt h of tim e allowed for i ncoming messages. Recording Quality Sets the recording quality between standard (STD) and long play (LONG).
16 T oll Saver T oll Saver can save you the cost of a call when you access yo ur messages from another phone: • If you have new messages, the unit answers after the 3rd ring. • If you have no new messages, the unit answers after the 5th ring. Y ou can hang up a fter the 3rd ring and sav e th e pay tel epho ne o r lon g di stan ce cha rge.
17 Setting the Security Code This feature allows you to change the factory default remote access code used for remote access to your answerer . The default code is 123 . 1. Press and release the MENU button until the screen displays REMOTE ACCESS . 2.
18 Setting Y our Local Area Code 1. Press and release the MENU button until the screen displays LOCAL AREA CODE . 2. The left-most digit, or a (_) sign ashes indicating the unit is ready to accept the area code entry . 3. Press the keypad number to set the 3-digit local area code in one step.
19 Setting the T ime and Date Note: If you have subscribed to the Caller ID display feature from your telephone company , the telephone company sends the time and date with the Caller ID information. The unit automatically sets the time and date when the rst call is received.
20 Date 1. Use the keypad to enter two digit numbers to set the date. 2. When nished, press MENU to conrm. TIP: For example, to enter 8:09 a.m. 7/4: 1. Press 08. 2. Press 09. 3. Press * (for a.m.). 4. Press 07. 5. Press 04. 6. Press MENU . Note: T o skip to next setting, press SKIP .
21 Handset V olume Use the VOL (+ or -) buttons to adjust the handset listening volume while it is in use. Speakerphone V olume Use the VOL (+ or -) buttons to adjust the speakerphone listening volume while it is in use.
22 Caller ID Features IMPORT ANT : In order to use this unit’s Caller ID features, you must subscribe to either the standard Name/Number Caller ID Service or Call W aiting Caller ID Service. T o know who is calling while you are on the phone, you must subscribe to Call W aiting Caller ID Service.
23 Caller ID with Call W aiting Provided you subscribe to Call W aiting Caller ID service from your phone company; if you receive an incoming call and you are already on the phone, a beep indicates the presence of a Call W aiting call on the line.
24 Deleting CID Records • T o delete the record shown in the display , press the DELETE button once. • T o delete all records while reviewing, press and hold the DELETE button for about three seconds. The screen displays DELETE ALL? . Press DELETE again to complete.
25 3. If you are at on-hook and PICKUP or ADJ displays, you can adjust the phone number format by pressing the DIAL button. If the phone is off-hook and ADJUST shows in the display , you can adjust the phone number format by pressing the DIAL button.
26 Memory Y ou may store up to 13 numbers in memory for quick dialing – 3 in the Quick Dial buttons (A, B, and C) and 10 in the keypad numbers (0-9). Each memory location can store number up to 32 digits. Storing a Number in Memory 1. Press the STORE button.
27 7. T o enter another name and number in a different memory location, return to Step 1 and repeat the process. Storing a Redial Number to Memory 1. Press the REDIAL button and the screen displays the number . 2. Press the STORE button. The screen displays LOCA TION? .
28 Erasing a Stored Number 1. Press the STORE button. 2. Press the memory location (0-9, A, B, C) to be erased. 3. Press the DELETE button. Copying Caller ID Memories to User Memory 1. Press the SKIP or REPEA T buttons to view the caller number and name you want to copy .
29 Inserting a Pause in the Dialing Sequence Press the REDIAL/P AUSE button to insert a delay in the dialing sequence of a stored telephone number when a pause is needed to wait for a dial tone (for example after you dial 9 for an outside line, or to wait for a computer access tone).
30 Reviewing Stored Numbers 1. Press DIAL . The screen displays LOCA TION? . 2. Press a memory location key (0-9, A, B , C ) to review the memory location’s content. • T o dial the displayed number , press the SPEAKER button or lift the handset. • T o exit stored number review , press FLASH/EXIT .
31 Chain Dialing from Memory Use this feature to make calls which require a sequence of numbers, for instance, if you use a calling card for a frequently called long distance number .
32 Answering System Operation Call Answering When a call comes in, the unit will ring the number of times set, play the greeting, and record the incoming call. Y ou can: • Answer the call before the unit answers. • Pick up the phone during the greeting.
33 Playing Messages Use the PLA Y/STOP button to play messages. The unit rst plays new messages in the order received. If there are no messages, the unit announces, “Y ou have no messages.” If there are no new messages, the old messages are played back.
34 Leaving a Memo Use the MEMO button to record a specic message for others who have access to the unit. 1. Press and hold the MEMO button. The unit announces, “Record your memo after the tone.” 2. Record your message after the beep. 3. Release MEMO when you’re nished talking.
35 Note: After the unit plays the remote menu, it waits 20 seconds for a command, then disconnects. Remote Access Commands Play messages 2 Repeat messages (during message playback) 1 Skip to next mess.
36 Message Indicators The following special messages indicate the status of a message or the unit: 00 CALLS The call record log is empty . UNKNOWN NUMBER The incoming call does not have Caller ID service or their service area is not linked to yours.
37 T roubleshooting Guide T elephone Solutions No dial tone • Check the hook switch to make sure it pops up. Won’t dial out • Make sure the tone/pulse setting is programmed correctly . Phone doesn’t ring • Check the ringer volume. • Could have too many phones on one line.
38 Won’t respond to remote commands • Must use a touch-tone phone. • Must enter the correct security code. • Did unit hang up? If you take no action for a period of time, it automatically hangs up. Answerer doesn’t work • Unplug the power cord from the electrical outlet and plug it back in to reset the answerer .
39 General Product Care T o keep your product working and looking good, follow these guidelines: • Avoid putting it near heating appliances and devices that generate electrical noise (for example, motors or uorescent lamps). • DO NOT expose to direct sunlight or moisture.
40 Causes of Poor Reception • Aluminum siding. • Foil backing on insulation. • Heating ducts and other metal construction that can shield radio signals. • Y ou’re too close to appliances such as microwaves, stoves, computers, etc. • Atmospheric conditions, such as strong storms.
41 W arranty Important: Evidence of original purchase is required for warranty service. W ARRANTOR: UNIDEN AMERICA CORPORA TION (“Uniden”) ELEMENTS OF W ARRANTY : Uniden warrants, for one year , t.
42 Index A Answering System Operation ................... 32 Answering System Setup ......................... 1 1 Auto Disconnect ....................................... 32 B Base Layout ................................................ 8 Before Y ou Begin .
43 P Parts Checklist ............................................ 6 Placing a Phone Call ................................ 13 Playing Messages .................................... 33 R Receiving a Phone Call ............................ 13 Receiving and Storing Calls .
Model 1380 Printed in China © 2009 Uniden America Corp. Fort Worth, TX. Need Help? Get answers 24/7 at our website: www .uniden.com . OR If Y ou... Contact Uniden’ s.
Un punto importante, dopo l’acquisto del dispositivo (o anche prima di acquisto) è quello di leggere il manuale. Dobbiamo farlo per diversi motivi semplici:
Se non hai ancora comprato il Uniden 1380BK è un buon momento per familiarizzare con i dati di base del prodotto. Prime consultare le pagine iniziali del manuale d’uso, che si trova al di sopra. Dovresti trovare lì i dati tecnici più importanti del Uniden 1380BK - in questo modo è possibile verificare se l’apparecchio soddisfa le tue esigenze. Esplorando le pagine segenti del manuali d’uso Uniden 1380BK imparerai tutte le caratteristiche del prodotto e le informazioni sul suo funzionamento. Le informazioni sul Uniden 1380BK ti aiuteranno sicuramente a prendere una decisione relativa all’acquisto.
In una situazione in cui hai già il Uniden 1380BK, ma non hai ancora letto il manuale d’uso, dovresti farlo per le ragioni sopra descritte. Saprai quindi se hai correttamente usato le funzioni disponibili, e se hai commesso errori che possono ridurre la durata di vita del Uniden 1380BK.
Tuttavia, uno dei ruoli più importanti per l’utente svolti dal manuale d’uso è quello di aiutare a risolvere i problemi con il Uniden 1380BK. Quasi sempre, ci troverai Troubleshooting, cioè i guasti più frequenti e malfunzionamenti del dispositivo Uniden 1380BK insieme con le istruzioni su come risolverli. Anche se non si riesci a risolvere il problema, il manuale d’uso ti mostrerà il percorso di ulteriori procedimenti – il contatto con il centro servizio clienti o il servizio più vicino.
