Manuale d’uso / di manutenzione del prodotto FEP-32024T del fabbricante UNICOM
Vai alla pagina of 15
908 Canada Court City of Industry , C A 91748 U.S.A. Phone: 626.964.7873 or 800.346.6668 F ax: 626.964.7880 www .unicomlink.com e-mail: info@unicomlink.com www .unihomenetworkingbox.com ©UNICOM 2005. UNICOM and “A Network Systems Solution” ar e trademarks of UNICOM Electric, Inc.
Content 1. Introduction .............................................................. 1 Features ...................................................................... 1 Package Contents ...................................................... 2 Ethernet Switching Technology .
.
1 1. Introduction The 24 Port Micro-Switch/24 Desktop Fast Ethernet Switch is a multi-port Switch that can be used to build high-performance switched workgroup networks. This switch is a store-and-forward device that offers low latency for high-speed networking.
2 Package Contents Unpack the contents of the Micro-Switch/24 Desktop Fast Ethernet Switch and verify them against the checklist below. Micro-Switch/24 Desktop Fast Ethernet Switch User Guide Power Cord Four Rubber Feet Micro-Switch/24 User Guide Power Cord Rubber Feet Figure 1-2.
3 Ethernet Switching Technology Ethernet Switching Technology dramatically boosted the total bandwidth of a network, eliminated congestion problems inherent with Carrier Sense multiple access with Collision Detection (CSMA/CD) protocol, and greatly reduced unnecessary transmissions.
4 2. Hardware Description This Section describes the hardware of the Micro-Switch/24 Desktop Fast Ethernet Switch/. The physical dimensions of the Micro-Switch/24 are: 250mmx 133 mm x 37mm (L x W x H) Front Panel The Front Panel of the Micro-Switch/24 consists of twenty-four (24) 10/100Base-TX RJ-45 ports.
5 Figure 2-2. LED Indicators LED Status Description Green Power is supplied Power Off Power is not connected Green The port is connecting with the device Blinks The port is receiving or transmitting data LK/ACT Off No device attached Table 2-1.
6 Desktop Installation Set the Switch on a sufficiently large flat space with a power outlet nearby. The surface should be clean, smooth, level, and sturdy. Ensure there is enough clearance around the Switch to allow air circulation and the attachment of the power cord and cables.
7 3.Network Application This section provides a few samples of network topology in which the Switch is used. In general, the Micro-Switch/24 Desktop Fast Ethernet Switch is designed as a segment switch. That is, with its large address table (4K MAC address) and high performance, it is ideal for interconnecting networking segments.
8 Segment Bridge For enterprise networks where large data broadcasts are constantly processed, this switch is an ideal solution for department users to connect to the corporate backbone. In the illustration below, two Ethernet switches with PCs, a print server, and a local server are both connected to the Micro-Switch/24.
9 4.Troubleshooting This section is intended to help you solve the most common problems on the Micro-Switch/24 Incorrect connections Faulty or loose cables Look for loose or obviously faulty connections. If they appear to be OK, make sure the connections are snug.
10 Diagnosing LED Indicators The Switch can be easily monitored through panel indicators to assist in identifying common problems you may encounter and where you can find possible solutions. If the power indicator does not turn on when the power cord is plugged in, you may have a problem with power cord.
11 5.Technical Specification Standard IEEE 802.3 10Base-T Ethernet, IEEE 802.3u 100Base-TX Fast Ethernet IEEE802.3x Flow Control and Back-pressure Protocol CSMA/CD Technology Store and Forward switching architecture Transfer Rate 14,880 pps Ethernet port 148,800 pps Fast Ethernet port MAC address 4K Mac address table Memory Buffer 1.
12 Power Consumption 19 Watts (maximum) EMI FCC Class A, CE.
Un punto importante, dopo l’acquisto del dispositivo (o anche prima di acquisto) è quello di leggere il manuale. Dobbiamo farlo per diversi motivi semplici:
Se non hai ancora comprato il UNICOM FEP-32024T è un buon momento per familiarizzare con i dati di base del prodotto. Prime consultare le pagine iniziali del manuale d’uso, che si trova al di sopra. Dovresti trovare lì i dati tecnici più importanti del UNICOM FEP-32024T - in questo modo è possibile verificare se l’apparecchio soddisfa le tue esigenze. Esplorando le pagine segenti del manuali d’uso UNICOM FEP-32024T imparerai tutte le caratteristiche del prodotto e le informazioni sul suo funzionamento. Le informazioni sul UNICOM FEP-32024T ti aiuteranno sicuramente a prendere una decisione relativa all’acquisto.
In una situazione in cui hai già il UNICOM FEP-32024T, ma non hai ancora letto il manuale d’uso, dovresti farlo per le ragioni sopra descritte. Saprai quindi se hai correttamente usato le funzioni disponibili, e se hai commesso errori che possono ridurre la durata di vita del UNICOM FEP-32024T.
Tuttavia, uno dei ruoli più importanti per l’utente svolti dal manuale d’uso è quello di aiutare a risolvere i problemi con il UNICOM FEP-32024T. Quasi sempre, ci troverai Troubleshooting, cioè i guasti più frequenti e malfunzionamenti del dispositivo UNICOM FEP-32024T insieme con le istruzioni su come risolverli. Anche se non si riesci a risolvere il problema, il manuale d’uso ti mostrerà il percorso di ulteriori procedimenti – il contatto con il centro servizio clienti o il servizio più vicino.
