Manuale d’uso / di manutenzione del prodotto ID Card Printer del fabbricante Ultra electronic
Vai alla pagina of 49
Reverse T ransfer ID Car d Printer User Guide.
• Thankyou for purchasing this pr oduct • Please read this manual car efully befor e use to ensure corr ect operation. It is particularly important to read the Safety Pr ecautions for safe operation. After reading, r etain this manual car efully for future r efer ence • The product number is important for quality contr ol.
2 Declaration of Conformity Model Number: IDX380yyyyy(y=A-Z,0-9 or blank) Product name: Card Printer We herewith declare that the above mentioned product complies with the following council directives and harmonized standards. Council Directives: 89/336/EEC relating to electromagnetic compatibility.
3 For USA only NOTE: This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference when the equipment is operated in a commercial environment.
4 Contents Bef ore use .................................................... 7 Product f eatures .................................................... 7 Checking accessories ............................................ 7 Handling of transf er film, ink ribbons and cards .
5 (to the next page) Notes for safe operation Before you use Read these notes on safety thoroughly before operating your printer in order to use the unit properly. Once you start using the unit, this manual should be put aside the unit, or at a convenient place where you can look up the manual any time as you need.
6 Notes for safe operation (continued) 䡵 Pull out the power plug before cleaning the machine. • This is for preventing electric shocks. 䡵 Pull out the power plug when you won’t use the machine for a prolonged period of time to assure safety.
7 (to the next page) Before use Product features 䢇 This card printer allows printing of high-quality, full- color images equivalent to photographic quality onto standard size (ISO 7810 compliance) plastic cards using sublimation type transfer printing.
8 Before use (continued) Storing and handling cards after printing Avoid storing the cards in locations exposed to direct sunlight or with high humidity.
9 Names of parts Front When the printer door is open Slide knob Control panel Printer door Card tray Power switch Retransfer film cassette (Accessory) Ink ribbon cassette (Accessory) Rear External con.
10 Set-up Connecting with a host computer This section describes the settings for connection with a host computer. Make sure that the power switch is switched to OFF when connecting with a host computer or making settings. 1. Set the BUS switches. Set the BUS switches on the rear according to the usage environment.
11 (to the next page) 3. Connect the printer and IC unit. Connect the cable which comes with the IC unit to the OPTION 1 terminal. 4. Connect the IC unit with the host computer. Connect interface cables which are commercially available. Use the OPTION 1 side.
12 Set-up (continued) Compact IC unit (sold separately) Please ask your dealer for the Compact IC unit connection. 1. Connect the compact IC unit to the host computer. Connect interface cables which are commercially available. Connecting the power cord 1.
13 (to the next page) Card discharge slot Claw Card stacker (accessory) Card stacker receptacle Installing the card stacker 1. Mount the card stacker on the printer. Hang the stacker claw on the stacker receptacle. The card stacker is capable of containing approximately 100 0.
14 3. Insert the ink ribbon into the cassette. Stretch the ink ribbon along three shafts with the ink face of the ribbon facing outside and insert the bobbins firmly into the bobbin holders.
15 (to the next page) 5. Insert the cassette along the guide rail. Insert the cassette until it clicks securely into position. The lever returns to its original position. • The cassette containing the ink ribbon is heavy. Hold the cassette with both hands when you set or take out the cassette.
16 Set-up (continued) Setting the retransfer film Do not touch the retransfer film surface with your hands. 1. Activate the slide knob and open the printer door. When the slide knob is moved, the door opens downwards. Hold the door with your hand and open it slowly.
17 (to the next page) 4. Wind the retransfer film to take up the slack. Turn the knob in the arrow direction to wind a small portion of the retransfer film. If the film does not wind up, go back to step 3, and insert the bobbins firmly into the bobbin holders.
18 Set-up (continued) Setting cards Please use cards specified by your dealer. This unit can take both 0.76 mm-thick and 0.25 mm-thick cards. The factory setting is for 0.76 mm-thickness. See p.21 to set the thickness switching plate to 0.25 when using 0.
19 (to the next page) 3. Close the card tray. Push the card tray back into the printer until it no longer moves. Memo To print pre-printed cards on this printer, set the cards as indicated on the Software Operation Manual of the host computer.
20 Set-up (continued) Loading cards Load cards when the printer ’ s LCD shows the message “ Ready ” or “ No Card, ” etc. and not when printer operations have stopped due to an error. Cards can also be loaded when the power supply is not switched on.
21 3. Remove the card thickness switching plate and invert the direction. Move the plate back into position securely and tighten the screw. 4. Checking card feed Set a few cards on the card tray. Turn the roller drive gear in the arrow direction, and check that only one card is fed at a time.
22 Before use Names of parts on the operation panel Setting buttons Initializes the printer is reset by the software when an error occurs or an error is cancelled. The user mode setting is displayed when the unit is in the Ready or Preheating status. The button is also used when canceling the operation lock during errors.
23 (to the next page) Operation display LED contents and the LCD panel For details, see p. 41 – 43 of this manual. Initialization period When the power is turned on, the printer performs positioning of the ink ribbon and retransfer film. It also initializes the mechanisms of the printer and check their operations.
24 Operation Turning on the power 1. Before turning on the power, check the following: Make sure that the printer door is completely closed. Make sure that the card tray is completely closed. Make sure that the host computer is correctly connected. Make sure that any peripheral equipment is correctly connected.
25 Be sure NOT to do any of the following during printing operations: Do not open the printer door. Do not open the card tray. (while the LCD panel displays ‘ Loading ’ ) Do not turn off the power supply. Do not unplug the unit. Do not pull out the connection cable.
26 Operation (continued) User modes The settings for printing media, card, etc. can be made in the User mode. Press the MENU button when the unit is in the Ready, Preheat or Error status to suspend printing operations.
27 (to the next page) User mode settings >Bend Remedy> >Retransfer> >>Media T ype >>T emp. Level >>Speed (Front) >>Speed (Back) Standard:0 0(Standard) -2 -2 Standar.
28 Operation (continued) Display mode settings The unit has the following three settings for the display mode. Allows selection of which counter value is displayed when the power is turned on. CAUTION The beep sounds when pressing the Enter button to save the settings in the user setting mode.
29 (to the next page) Clearing the free counter Reset the free counter. The [Total] counter and [Head] counter cannot be reset. Cleaning mode The printer is provided with an operation mode for cleaning the magnetic head and card feed roller to keep the printer in the best condition.
30 Operation (continued) Ink mode setting Change settings according to the ink ribbon used. >Ink> >>Black Level >>Black Mode >>Ink T ype YMCK:0 0(Standard) Standard >>SP-.
31 (to the next page) >Retransfer> >>Media T ype >>T emp.Level >>Speed (Front) >>Speed (Back) Std(1000/roll):0 0(Standard) -2 -2 ENTER ENTER ENTER ENTER RESET ENTER MENU MENU MENU MENU EXIT EXIT EXIT EXIT ENTER EXIT Retransfer mode setting Change settings according to the retranfer film and card used.
32 Operation (continued) Buzzer mode setting The buzzer indicating errors can be turned on or off. Power saving mode settings The printer enters into the power save mode after a specified period of time if none of operation buttons are touched in the Ready state.
33 (to the next page) Setting the bend remedy mode Single-sided printing may cause a bend depending on the cards. Adjust the setting to get rid of the bend.
34 Operation (continued) Card size setting mode The printer is designed to load two sizes of cards. Set the card size according to the card to be printed. >Card Size Stanard EXIT ENTER Exit user mode Set the card size: 2 settings [Standard and Cybernetic] Press to select the setting and press to save.
35 Care and cleaning Always make sure that the unit is turned off before cleaning. (However, cleaning of the discharge rollers and magnetic head should be carried out with the power turned on.) To achieve the best performance from the printer, always check each part before use for dust and dirt and clean if necessary.
36 Cleaning the fan filter When the fan filter gets dirty, partial omissions may occur on the printed cards, or the printing result looks dirty. It is recommended to clean the fan filter after printing about 10,000 cards. 1. Remove the fan filters located in two positions on the sides of the printer.
37 (to the next page) 4. Remove dirt on the fan filter using a vacuum cleaner or other cleaning equipment. Hold the sponge with your hand so that it is not sucked into the cleaner. 5. How to attach the sponge Side filter Press down the sponge into the dents at four corners, and set it under the tabs on the frame.
38 Cleaning the card feed rollers Dirty rollers are the major cause of jamming of the cards. It is recommended to clean the rollers once after printing about 1,000 cards. It is also recommended to carry out cleaning before the work, because the retransfer roller (heat roller) does not operate while it is hot.
39 Cleaning the card feed rollers and heat rollers Dirty magnetic head will cause a write/read error. It is recommended to clean the magnetic head after printing about 1,000 cards. Cleaning the magnetic head is not necessary if the magnetic stripe card is not used.
40 Jam (T urnOver) Jam (Hopper) Jam (T ransfer) Troubleshooting Layout of rollers inside the printer Below is a diagram of the layout of rollers inside the printer.
41 Error code listing The meaning of “ reset → enter buttons ” in the list is, after pressing the Reset button, press the Enter button to initialize the unit.
42 Troubleshooting (continued) Should your printer require servicing, turn it off and unplug it and make inquiries at the outlet where it was purchased.
43 (to the next page) EXT . SW Setting EXT . Jam EXT . Commin ucate Error code Description of error Remedy External device switch setting error Turn the power off and then on again. Call for service if the problem persists. External retransfer unit jam error Press the “ reset → enter buttons ” and remove cards if they are not discharged.
44 Troubleshooting (continued) Removing card jams To determine the part of the machine affected by a card jam refer to the error code on the operation panel LCD on the printer and the relevant page in this manual. When removing a jammed card, make sure that the power switch is set off before carrying out the following procedure.
45 Turnover section [Jam (turnover)] 1. Open the printer door and remove the ink ribbon cassette. See p.14 in this manual. 2. Remove any jammed cards. Retransfer section [Jam (transfer)] 1. Open the printer door and remove the retransfer film cassette.
46 Specifications Main specifications Recording method : Sublimation type retransfer Feed format : Automatic feed Recording density : 300 dpi Expression gradation : 256 gradations for each color Printing time : Approx.
47 External appearance and dimensions Front view Side view unit/mm 343 347 381.
Ultra Electronics Card Systems W averley House, Hampshire Road Granby Estate, W eymouth, Dorset DT4 9XD, UK tel : +44 (0) 1305 784 738 • fax : +44 (0) 1305 777 904 email : UKsales@UltraMagicard.
Un punto importante, dopo l’acquisto del dispositivo (o anche prima di acquisto) è quello di leggere il manuale. Dobbiamo farlo per diversi motivi semplici:
Se non hai ancora comprato il Ultra electronic ID Card Printer è un buon momento per familiarizzare con i dati di base del prodotto. Prime consultare le pagine iniziali del manuale d’uso, che si trova al di sopra. Dovresti trovare lì i dati tecnici più importanti del Ultra electronic ID Card Printer - in questo modo è possibile verificare se l’apparecchio soddisfa le tue esigenze. Esplorando le pagine segenti del manuali d’uso Ultra electronic ID Card Printer imparerai tutte le caratteristiche del prodotto e le informazioni sul suo funzionamento. Le informazioni sul Ultra electronic ID Card Printer ti aiuteranno sicuramente a prendere una decisione relativa all’acquisto.
In una situazione in cui hai già il Ultra electronic ID Card Printer, ma non hai ancora letto il manuale d’uso, dovresti farlo per le ragioni sopra descritte. Saprai quindi se hai correttamente usato le funzioni disponibili, e se hai commesso errori che possono ridurre la durata di vita del Ultra electronic ID Card Printer.
Tuttavia, uno dei ruoli più importanti per l’utente svolti dal manuale d’uso è quello di aiutare a risolvere i problemi con il Ultra electronic ID Card Printer. Quasi sempre, ci troverai Troubleshooting, cioè i guasti più frequenti e malfunzionamenti del dispositivo Ultra electronic ID Card Printer insieme con le istruzioni su come risolverli. Anche se non si riesci a risolvere il problema, il manuale d’uso ti mostrerà il percorso di ulteriori procedimenti – il contatto con il centro servizio clienti o il servizio più vicino.
