Manuale d’uso / di manutenzione del prodotto pmn del fabbricante U-Line
Vai alla pagina of 32
™ P .O. Box 245040 M ilwaukee, WI 53224-9540 P hone: 414.354.0300 F ax: 414.354.7905 www .u-line.com Printed in U.S.A. P/N 30-10007 Échelon ™ U S E R M A N U A L.
U-LINE CORPORA TION LIMITED W ARRANTY U-Line Corporation warrants each U-Line product to be free from defects in materials and workmanship for a period of one year from the date of purchase; and warra.
INTRODUCTION Congratulations on your purchase of U-Line ice making or refrigeration products. A pioneer in the field for nearly 40 years, U-Line is the world’ s number one manufacturer of built-in, under-counter ice making and specialty refrigeration products.
If you do not return your W arranty Registration Card, U-Line will use the date of sale to the U-Line distributor as the first date of warranty for your unit. Please also record the purchase date of your U-Line unit and your dealer’ s name, address and telephone number .
3 SAFETY PRECAUTIONS Do not attempt to install or operate your unit until you have read the safety precautions in this manual. Safety items throughout this manual are labeled with a Danger , W arning or Caution based on the risk type.
GENERAL PRECAUTIONS RISK OF CHILD ENTRAPMENT . Before you throw away your old refrigerator or freezer , take of f the doors and leave shelves in place so that children may not easily climb inside. • Never attempt to repair or perfor m maintenance on the unit until the electricity has been disconnected.
INST ALLATION SITE PREP ARATION 1. Position the unit on a flat, level surface, capable of suppor ting the entire weight of the unit. Remember the unit will be significantly heavier once it is fully loaded. 2. This unit requires grounded and polarized 115 V AC, 60Hz, 15A circuit (normal household current).
3. If installing an Ice Maker model, install and connect the water sup- ply line. See CONNECTING THE W A TER SUPPL Y for installation requirements. 4. Position the unit to allow free air flow through the front grille (see Figure 2). Figure 2 5. Wipe out inside of unit and ice bucket with a damp cloth.
CONNECTING THE W ATER SUPPL Y On Ice Maker models BI 2015 and Combo 2075FF , install a 1/4 inch outside diameter copper water line (not supplied with unit) from the nearest COLD water pipe. When connecting the water supply , follow these guidelines: • Review the local plumbing codes before you install the unit.
3 . For recessed installations, allow extra water supply line length to provide slack for easy removal from the recessed area (see Figure 5). This will also safeguard against kinking the line.
9 LEVELING THE UNIT It is impor tant that the unit, primarily the Ice Maker models, are level. All Échelon™ Series units are equipped with adjustable feet for level- ing and height adjustment (see Figures 7 & 7A).
T o reverse the door: 1. Remove top hinge screw pin (7/64" Allen wrench) from cabinet (see Figure 9). Re- move door by tilting for ward and lifting off bottom hinge pin. Figure 9 2. Remove plastic screw plugs (3 each, top and bottom) from new hinge location.
5. Remove existing bottom hinge (3 screws) and remount on oppo- site side TOP . Remove top hinge screw pin. 6. With bottom of door facing up, remove pivot plate (2 screws), flip over , and remount on opposite side of door (see Figure 13). Figure 13 7.
CUSTOM DOOR P ANELS T wo types of custom door panels can be installed on your U-Line unit to harmonize with or accent the surrounding decor . FULL OVERLA Y DOOR PANEL A full overlay door panel completely covers the door frame and handle to give a built-in appearance.
Install the inser t as follows: Insert edges may be SHARP! Use care when installing. 1. Remove top hinge screw pin (7/64" Allen wrench, see Figure 15). Remove door by tilting for ward and lifting of f bottom hinge pin. 2. Remove two outside screws holding door handle.
6. Holding door gasket out of the way , replace handle on door mak- ing sure it is seated properly on inser t and that screw holes line up. 7. Install two small screws removed in step 2. 8. Star ting at the corners and working inward, push door gasket into place on door .
CONTROL SETTINGS - COMBO/ICE MAKER Models BI 2015 and 2075FF are turned ON with the ON/OFF switch recessed in the front grille (see Figure 19). In these units, the control dial is used only for tem- perature control. Figure 19 1. Plug the appliance cord into a 115V polarized and grounded elec- trical outlet.
NORMAL OPERATION On units with refrigerator sections, the unit has been designed to achieve a fresh food temperature of approximately 38°F . Those units with a freezer section are designed to have a freezer temperature of approximately 0°F . On units with ice makers, when the ice buck- et is full, the ice making mechanism will shut off.
The ice bin door must be fully closed with the door lip inside the ice bucket. Frost free models: Do not place any objects over air inlet or outlet in freezer section. For frost free models: Light frosting may occur in high humidity condi- tions or if the ice bucket is not pushed in completely .
UL122 + – 18 User’s Manual OUTDOOR & MARINE USE Many U-Line models are designed to operate in harsh outdoor/marine environments. Special considerations include the following: • For best performance, keep the unit out of direct sunlight.
3. T urn the adjusting screw toward the minus (–) sign (clockwise) for smaller cubes or toward the plus (+) sign (counterclockwise) for larger cubes. 4. Install the ice maker assembly cover . MAINTENANCE Periodic cleaning and proper maintenance will ensure efficiency , top performance, and long life.
• DO NOT use solvent cleaning agents or abrasives on the interior . These cleansers may transmit taste to the ice cubes, or damage or discolor the interior . CONDENSER CLEANING - EVERY 3 MONTHS Disconnect electric power to the unit before cleaning the condenser .
2. Remove the screws at each end of the grille. 3. Remove the grille. DO NOT touch the condenser fins. The condenser fins are SHARP and can be easily damaged. 4. Clean the condenser coil using a brush or vacuum cleaner . Do not touch. 5. Position the grille to align the screw holes with the cabinet.
22 User’s Manual UL303 NOTCH BOSS Figure 28 DOOR SHELF REMOV AL/INSER TION T o Remove Door Shelf (see Figure 28): 1. Grasp shelf in center , lift slightly , and tilt 15°-20°. 2. Carefully pull shelf of f bosses. T o Install Door Shelf: 1. Holding shelf in center , align notches in shelf with bosses in door .
CRISPER Slowly pull out the crisper . If it is pulled out too far , it could come out all the way and possibly cause damage or injury . Combo 2075FF , 2075R and 2075RF models have a crisper for storage. Grasp the crisper handle and pull out to access the contents (see Figure 29).
DEFROSTING DO NOT use any type of electrical heating device, ice pick, knife, or other sharp instrument to defrost. Doing so may cause personal injury or damage the inner lining or refrig- eration system and void the warranty . BI 2015 is a manual defrost model and should be defrosted approxi- mately ever y 8 weeks.
25 STORAGE If the unit is to be stored or not used for extended periods, it will be necessar y to drain the system of water . 1. Shut off water supply at the main water source. 2. Disconnect the water supply line from the solenoid valve. 3. Disconnect the water line from the solenoid valve outlet.
26 User’s Manual TROUBLESHOOTING BEFORE CALLING FOR SERVICE If the unit appears to be malfunctioning, read through NORMAL OPER- A TION first. If the problem persists, check the TROUBLESHOOTING GUIDE. Locate the problem in the guide and refer to the cause and its remedy before calling for ser vice.
Problem Possible Cause Remedy The unit frosts Unit is manual Model B2015 is a up. defrost model. manual defrost. Refer to DEFROSTING. High ambient Defrost unit manually . temperatures or See DEFROSTING. humidity . W ater is leaking W ater supply Tighten fitting.
28 User’s Manual IF SERVICE IS REQUIRED If the need for ser vice arises, contact the dealer from whom the unit was purchased. State the Model Number and Serial Number and explain the problem. The Model and Serial Number plate is located inside unit at upper right hand corner .
U-LINE CORPORA TION LIMITED W ARRANTY U-Line Corporation warrants each U-Line product to be free from defects in materials and workmanship for a period of one year from the date of purchase; and warra.
™ P .O. Box 245040 M ilwaukee, WI 53224-9540 P hone: 414.354.0300 F ax: 414.354.7905 www .u-line.com Printed in U.S.A. P/N 30-10007 Échelon ™ U S E R M A N U A L.
Un punto importante, dopo l’acquisto del dispositivo (o anche prima di acquisto) è quello di leggere il manuale. Dobbiamo farlo per diversi motivi semplici:
Se non hai ancora comprato il U-Line pmn è un buon momento per familiarizzare con i dati di base del prodotto. Prime consultare le pagine iniziali del manuale d’uso, che si trova al di sopra. Dovresti trovare lì i dati tecnici più importanti del U-Line pmn - in questo modo è possibile verificare se l’apparecchio soddisfa le tue esigenze. Esplorando le pagine segenti del manuali d’uso U-Line pmn imparerai tutte le caratteristiche del prodotto e le informazioni sul suo funzionamento. Le informazioni sul U-Line pmn ti aiuteranno sicuramente a prendere una decisione relativa all’acquisto.
In una situazione in cui hai già il U-Line pmn, ma non hai ancora letto il manuale d’uso, dovresti farlo per le ragioni sopra descritte. Saprai quindi se hai correttamente usato le funzioni disponibili, e se hai commesso errori che possono ridurre la durata di vita del U-Line pmn.
Tuttavia, uno dei ruoli più importanti per l’utente svolti dal manuale d’uso è quello di aiutare a risolvere i problemi con il U-Line pmn. Quasi sempre, ci troverai Troubleshooting, cioè i guasti più frequenti e malfunzionamenti del dispositivo U-Line pmn insieme con le istruzioni su come risolverli. Anche se non si riesci a risolvere il problema, il manuale d’uso ti mostrerà il percorso di ulteriori procedimenti – il contatto con il centro servizio clienti o il servizio più vicino.