Manuale d’uso / di manutenzione del prodotto C3 del fabbricante Turbo Chef Technologies
Vai alla pagina of 32
Accelerating the World of Cooking TM C3 Owner’s Manual FOR THE TURBOCHEF C 3 SPEED COOK OVEN 800.90TURBO / +1 214-379-6000 Part Number: TC3-0209 / Revision E / May 2007.
.
MODEL SERIAL NUMBER INSTALLED BY INSTALLATION CHECKED BY SERVICE CENTER NAME / NUMBER For service or information call: Customer Service at 800.90 TURBO or +1 214-379-6000 Sales and Marketing at 866.
IMPORTANT SAFETY INFORMATION The information contained in this manual is important for the proper installation, use and maintenance of this oven. Adherence to these procedures and instructions is important for satisfactory baking results and long-term trouble-free service.
Table of Contents Introduction Important Safety Instructions 2 Precautions to Avoid Possible Exposure to Excessive Microwave Energy 3 Grounding Instructions 3 RF Interference Considerations 3 Oven Des.
2 INTRODUCTION Introduction TO THE TURBOCHEF C 3 OVEN IMPORTANT SAFETY INSTRUCTIONS When using electrical appliances, the following basic safety precautions should be strictly adhered to so as to reduce the risk of burns, electric shock, fire, injury, or exposure to excessive microwave energy: o Read all instructions before using the appliance.
3 INTRODUCTION PRECAUTIONS TO AVOID POSSIBLE EXPOSURE TO EXCESSIVE MICROWAVE ENERGY To reduce the risk of exposure to excessive microwave energy: o x DO NOT attempt to operate this oven with the door open since open-door operation can result in harmful expo- sure to microwave energy.
4 INTRODUCTION OVEN DESCRIPTION AND SPECIFICATIONS The C3 roasts, browns, and broils a wide variety of foods up to 10X faster and at a quality that meets or exceeds traditional c ooking methods. Intense microwave energy combines with rapidly-recirculating hot air to cook food faster than conventional ovens without sacrificing product quality.
5 INSTALLATION INSTALLATION The TurboChef C3 Oven is manufactured to comply with applicable CE, NSF, UL, cUL, FDA and FCC requirements. All equipment is designed and certified for safe operation when installed in accordance with local and/or national codes.
6 INSTALLATION WARNING : Death, injury and equipment damage may result from improper positioning. It is the operator’s responsibility to ensure the oven is properly positioned on countertop daily. TurboChef will not warrant any damage or injury to ovens that fall off countertops due to improper placement.
Built-In Installation Figure 4. TurboChef ovens are designed to be installed on a countertop or table. They are not intended for built-in or enclosed installation. “Built-in or enclosed installation” is defined as installing an oven in any structure that surrounds the oven by five sides (i.
FIGURE 5 : Installation Near Open Heat Source 8 INSTALLATION.
9 OPERATION Operation USING THE C 3 AND ALL OF ITS FEATURES This section contains detailed information on how to power up your C3 oven, cooking and programming instructions, an d operation tips. Read this information thoroughly and refer back to it as necessary.
10 OPERATION THE CONTROL PAD Figure 6. 1. Display Window Displays operation and programming information. 2. Soft Keys Eight keys used to select options that are displayed adjacently on the screen. 3. Arrow Keys Use independently to navigate between and within screens.
11 POWER–UP The Initial Power On When power is initially applied, the oven START UP screen will display the firmware version and the oven’s serial number for 5 seconds ( Figure 7 ). The OFF screen will then display “Oven Off” in large text ( Figure 8).
2 . The MENU ITEM SELECT screen is displayed with eight menu items, each associated with the eight soft keys. Press the soft key corresponding to the desired menu item (Figure 11). 3 . From the MENU ITEM SELECT screen, press the soft key corresponding to the desired item to initiate a cook cycle.
EDITING A FOOD ITEM 1. From the COOLING DOWN or OFF mode, simultaneously press the UP and DOWN keys. 2. Enter the code “9” and press ENTER . NOTE: For instructions on changing the EDIT PIN number, contact Customer Service at 800.90 TURBO or +1 214-379-6000.
9. Press the “Save” soft key to save the new settings. Doing so will permanently replace old item settings. 10.When done editing recipes, press the BACK key until returned to the COOLING DOWN or OVEN OFF screen.
15 OPERATION FIGURE 19: Insert Smart Card Loading a Menu from a Smart Card Please note that once the procedure below is completed, the old menu settings will be permanently lost . 1. Ensure the oven is in the OVEN OFF / COOLING DOWN mode (page 12). 2.
16 OPERATION OPERATING TIPS How to Develop Cook Settings TurboChef ovens use both hot air and microwave energy to cook food. If you have experience with either a convec- tion oven or microwave oven, you will see similarities and significant differences.
17 MAINTENANCE CLEANING Carbon and grease buildup will adversely affect the cooking performance and life expectancy of certain components of the oven. It is the operator’s responsibility to properly maintain this unit. Failure to maintain this unit in a clean condition will void the warranty.
TROUBLESHOOTING To help save time and money, please perform the following steps before calling for warranty service. Reference Table 1 . 1. Press the BACK key on the keypad until the oven screen reads “Oven Off.” 2. Press the “4” and “6” keys simultaneously and record serial number.
MAINTENANCE PROBLEM AREA OR FAULT CODE POSSIBLE CAUSE ( S ) SUGGESTED REMEDY No power to oven o Oven not plugged in. o Main circuit breaker tripped. o Plug oven in. o Verify wall circuit breaker is on. Reset breaker and then Power oven back on. Oven does not warm up o Oven is in off mode.
MAINTENANCE PROBLEM AREA OR FAULT CODE POSSIBLE CAUSE ( S ) SUGGESTED REMEDY F2 Low Temp o Oven power interrupted. o Cooking platter restricting air flow. o Air nozzles on top of cooking chamber are clogged. o Catalytic converter is clogged and restricting proper air flow circulation in the oven.
21 MAINTENANCE CATALYTIC CONVERTER The catalytic converter is installed in the return air duct behind heater assembly, and should only be removed or serviced by a qualified technician. NOTE: The catalytic converter can be cleaned with TurboChef ® Oven Cleaner and thoroughly rinsed with distilled water.
22 MAINTENANCE The TurboChef C3 Limited Warranty outlined below is activated upon the receipt of the Warranty Activation Card includ- ed in the C3 Starter Kit. The Activation Card must be completed and returned to TurboChef at the time of installa- tion.
23 MAINTENANCE Warranty Service; Exclusive Remedy: TurboChef will be solely responsible for determining whether or not the component and/or Equipment is defective.
24 MAINTENANCE This limited warranty shall apply to the sales of all TurboChef “C” Series ovens (the “Equipment”) manufactured by TurboChef International, Inc.
25 MAINTENANCE At its sole option, TurboChef may replace defective Equipment or components with new, recovered or rebuilt Equipment of equal or greater capability, and such Equipment or components will be warranted by the authorized Distributor for the balance of the Warranty Period.
Notes.
.
For service or information: Customer Service at 800.90 TURBO or Sales & Marketing at 866.90 TURBO Part Number: TC3-0209/Revision E/May 2007 Country Code: NA Accelerating the World of Cooking TM Corporate Headquarters Six Concourse Pkwy, Suite 1900 Atlanta, Georgia 30328 USA +1 678.
Un punto importante, dopo l’acquisto del dispositivo (o anche prima di acquisto) è quello di leggere il manuale. Dobbiamo farlo per diversi motivi semplici:
Se non hai ancora comprato il Turbo Chef Technologies C3 è un buon momento per familiarizzare con i dati di base del prodotto. Prime consultare le pagine iniziali del manuale d’uso, che si trova al di sopra. Dovresti trovare lì i dati tecnici più importanti del Turbo Chef Technologies C3 - in questo modo è possibile verificare se l’apparecchio soddisfa le tue esigenze. Esplorando le pagine segenti del manuali d’uso Turbo Chef Technologies C3 imparerai tutte le caratteristiche del prodotto e le informazioni sul suo funzionamento. Le informazioni sul Turbo Chef Technologies C3 ti aiuteranno sicuramente a prendere una decisione relativa all’acquisto.
In una situazione in cui hai già il Turbo Chef Technologies C3, ma non hai ancora letto il manuale d’uso, dovresti farlo per le ragioni sopra descritte. Saprai quindi se hai correttamente usato le funzioni disponibili, e se hai commesso errori che possono ridurre la durata di vita del Turbo Chef Technologies C3.
Tuttavia, uno dei ruoli più importanti per l’utente svolti dal manuale d’uso è quello di aiutare a risolvere i problemi con il Turbo Chef Technologies C3. Quasi sempre, ci troverai Troubleshooting, cioè i guasti più frequenti e malfunzionamenti del dispositivo Turbo Chef Technologies C3 insieme con le istruzioni su come risolverli. Anche se non si riesci a risolvere il problema, il manuale d’uso ti mostrerà il percorso di ulteriori procedimenti – il contatto con il centro servizio clienti o il servizio più vicino.
