Manuale d’uso / di manutenzione del prodotto TDB-24-48-1-G-1 del fabbricante True Manufacturing Company
Vai alla pagina of 23
............ www .truemfg.com ............ T ABLE OF CONTENTS Safety Information Safety Precautions 1 Proper Disposal 2 Connecting Electricity 3 Adapter Plugs 3 Installation / Operation Instructions O.
............ www .truemfg.com ............ T rue Food Service Equipment, Inc..
............ www .truemfg.com ............ SAFETY INFORMA TION T rue Food Service Equipment, Inc. 1 1 • This refriger ator must be properly installed and located in accordance with the Installation Instructions before it is used. • Do not allow childr en to climb, stand or hang on the shelves in the r efr ig erator .
............ www .truemfg.com ............ T rue Food Service Equipment, Inc. SAFETY INFORMA TION 2 2 PROPER DISPOSAL OF THE REFRIGERA TOR DANGER! RISK OF CHILD ENTRAPMENT USE OF EXTENSION CORDS NEVER USE AN EXTENSION CORD! TRUE will not warranty any refrigerator that has been connected to an extension cord.
The power cor d of this appliance is equipped with a 3-prong (gr ounding) plug which mates with a standard 3-prong (g rounding) wall outlet to minimize the possibility of electric shock hazard from this appliance. Have the w all outlet and circuit chec ked by a qualified electrician to make sure the outlet is properl y grounded.
............ www .truemfg.com ............ T rue Food Service Equipment, Inc. INST ALLA TION / OPERA TION INSTRUCTIONS 4 4 T o insure that your unit w orks properl y from the first day , it must be installed properly . W e highly recommend a trained r efr ig eration mechanic and electrician install your T r ue equipment.
............ www .truemfg.com ............ INST ALLA TION / OPERA TION INSTRUCTIONS T rue Food Service Equipment, Inc. 5 5 TOOLS REQUIRED: • Phillips screw driver • 3/8” socket or 3/8” wrench Step 2 A. Use a phillips screw div er and remov e four screws fr om the L-bracket connected the unit to the wood skid (see imag e 1).
............ www .truemfg.com ............ T rue Food Service Equipment, Inc. 6 6 CONDUCTORS AND CIRCUITS Wire Gauge for 2% Voltage Drop in Supply Circuits.
............ www .truemfg.com ............ T rue Food Service Equipment, Inc. 7 7 Step 1 - Position Cabinet Allow one inch betw een the wall and rear of the refriger ated Bar Equipment to assure proper ventilation. For Glass & Plate Chillers/Frosters 3 inches betw een the wall and rear of the cabinet will assure proper v entilation.
............ www .truemfg.com ............ T rue Food Service Equipment, Inc. 8 8 INST ALLA TION / OPERA TION INSTRUCTIONS Step 4 A. Bef ore your ne w unit is connected to a power suppl y , chec k the incoming voltag e with a voltmeter . If anything less than 100% of the rated voltag e for oper ation is noted, correct immediately .
INST ALL DRAFT ARM continued... Insert air hose (one inch plastic tube) in draft arm, being careful not to disturb insulation. Remove top cov er of draft arm and attach air hose clip to the insulating sleeve at the top of the dr aft arm. Replace top cover .
............ www .truemfg.com ............ T rue Food Service Equipment, Inc. 10 10 O F F 9 8 7 6 5 4 3 2 1 SHEL VING and BIN DIVIDER INST ALLA TION / OPERA TION INST ALLA TION / OPERA TION INSTRUCTIONS SHELF INST ALLA TION: A. Hook shelf clips onto shelf standards.
............ www .truemfg.com ............ T rue Food Service Equipment, Inc. 11 11 INST ALLA TION / OPERA TION INSTRUCTIONS Dispensing pressures differ according to: • The type of draft dispensing .
............ www .truemfg.com ............ T rue Food Service Equipment, Inc. 12 12 INST ALLA TION / OPERA TION INSTRUCTIONS Flat Beer - Description: Foamy head disappears quickly . Beer lacks usual zestful brewery fresh flavor . • CO 2 turned of f when not in use.
............ www .truemfg.com ............ T rue Food Service Equipment, Inc. 13 13 MAINTENANCE, CARE & CLEANING TERMS: Cut-out - T emperature sensed by the controller that shuts the compressor off. Cut-in - T emperature sensed by the controller that turns the compressor on.
............ www .truemfg.com ............ T rue Food Service Equipment, Inc. 14 14 Follow these instructions at ALL times when you replace a CO 2 gas cylinder: 1. Close cylinder at "A". 2. Remov e tap "D" from bar rel. Pull pressure release ring on body of tap to release pr essure remaining in line.
............ www .truemfg.com ............ T rue Food Service Equipment, Inc. 15 15 ............ www .truemfg.com ............ 15 Draught dispensers, regardless of design, must be cleaned at least ev er y tw o weeks. Flushing your draught dispenser with water onl y is not enough.
............ www .truemfg.com ............ T rue Food Service Equipment, Inc. 16 16 MAINTENANCE, CARE & CLEANING MAINTENANCE, CARE & CLEANING CLEANING THE CONDENSER COIL When using electrical .
............ www .truemfg.com ............ T rue Food Service Equipment, Inc. 17 17 Condensers accumulate dirt and require cleaning every 30 days. Dirty condensers result in compressor failure, product loss, and lost sales... which are not covered by warranty .
............ www .truemfg.com ............ T rue Food Service Equipment, Inc. 18 18 MAINTENANCE, CARE & CLEANING CAUTION: Do not use any steel wool, abrasive or chlorine based products to clean stainless steel surfaces.
............ www .truemfg.com ............ T rue Food Service Equipment, Inc. 19 19 MAINTENANCE, CARE & CLEANING Recommended cleaners for certain situations / environments of stainless steel A) Soap, ammonia and detergent medallion applied with a c loth or sponge can be used f or routine cleaning.
............ www .truemfg.com ............ T rue Food Service Equipment, Inc. 20 20 ............ www .truemfg.com ............ INST ALLA TION / OPERA TION INSTRUCTIONS Be careful when remo ving the light bulb. Please be a ware of y our local ordinances in disposing old f lorescent bulbs.
............ www .truemfg.com ............ T rue Food Service Equipment, Inc. T RUE R EFRIGERA TION MADE IN SINCE 1945 U .S.A. TM 21 21 W ARRANTY INFORMA TION (U.
Un punto importante, dopo l’acquisto del dispositivo (o anche prima di acquisto) è quello di leggere il manuale. Dobbiamo farlo per diversi motivi semplici:
Se non hai ancora comprato il True Manufacturing Company TDB-24-48-1-G-1 è un buon momento per familiarizzare con i dati di base del prodotto. Prime consultare le pagine iniziali del manuale d’uso, che si trova al di sopra. Dovresti trovare lì i dati tecnici più importanti del True Manufacturing Company TDB-24-48-1-G-1 - in questo modo è possibile verificare se l’apparecchio soddisfa le tue esigenze. Esplorando le pagine segenti del manuali d’uso True Manufacturing Company TDB-24-48-1-G-1 imparerai tutte le caratteristiche del prodotto e le informazioni sul suo funzionamento. Le informazioni sul True Manufacturing Company TDB-24-48-1-G-1 ti aiuteranno sicuramente a prendere una decisione relativa all’acquisto.
In una situazione in cui hai già il True Manufacturing Company TDB-24-48-1-G-1, ma non hai ancora letto il manuale d’uso, dovresti farlo per le ragioni sopra descritte. Saprai quindi se hai correttamente usato le funzioni disponibili, e se hai commesso errori che possono ridurre la durata di vita del True Manufacturing Company TDB-24-48-1-G-1.
Tuttavia, uno dei ruoli più importanti per l’utente svolti dal manuale d’uso è quello di aiutare a risolvere i problemi con il True Manufacturing Company TDB-24-48-1-G-1. Quasi sempre, ci troverai Troubleshooting, cioè i guasti più frequenti e malfunzionamenti del dispositivo True Manufacturing Company TDB-24-48-1-G-1 insieme con le istruzioni su come risolverli. Anche se non si riesci a risolvere il problema, il manuale d’uso ti mostrerà il percorso di ulteriori procedimenti – il contatto con il centro servizio clienti o il servizio più vicino.
