Manuale d’uso / di manutenzione del prodotto N779Pony del fabbricante Troy-Bilt
Vai alla pagina of 28
PRINTED IN U.S .A. FORM NO . 769-01543 (11/22/200 4) IMPOR T ANT : READ SAFETY R ULES AND INSTR UCTIONS CAREFULL Y Warning: This unit is equipped with an internal combustion engine and should not be u.
2 TABLE OF CONTENTS FINDING MODEL NUMBER This Operator’s Ma nual is an important part of your new lawn tractor. It will help you assemble, pr epare and maintain the unit for best performance .
3 SECTION 1: IMPORTANT SAFE OPERATION PRACTICES WARNING: This symbol points out import ant safety instructions which , if not followed, could endanger the personal safe ty and/or property of yourself and o thers. Read and follo w all instructions in this manua l before attemptin g to operate this machine .
4 23. Muf fler and engine become hot and can cause a burn. Do not touch. 24. Check overhead cle arances carefully before driving under low hang ing tree branches, wire s, door openings etc ., where the opera tor may be struck or pulled from the unit, which could re sult in serious injury.
5 e. Use extreme car e when approaching blind corners, doorways, sh rubs, trees or other objects that may block your vision of a child who may run into the ma chine. f. To avoid back-over ac cidents, always disengage the cutting blad e(s) before shifting i nto reverse.
6 8. Never tamper with the sa fety interlock system or other safety device s. Check their proper op eration regularly. 9. After striking a foreign object , stop the engine, disconnect the spark plug wire(s) and gro und against the engine. Tho roughly inspect the machine for any damage.
7 SECTION 2: SLOPE GAUGE 3IGHTANDHOLDTHISLEVELWITHAVERTICALTREE ORACORNEROFABUILDING ORAFENCEPOST &OLDALONGDOTTEDLINE.
8 SECTION 3: TRACTOR SET-UP Loose P arts Packaged with this Operat or’s Manual you’ll find: • One Small Clamp (72 6-0354) • One 1/4-20 x 1/2-inch Screw (710-0599) • One Oil Drain Sleeve (731-1682A) Store the clamp and screw in a co nvenient place.
9 Shipping Brace Remov al WARNING: Make sure the riding mower’s engine is off, remove the ig nition key, and set the parking br ake before removing the shipping brace . • Locate the shipping brace and accompanying warning tag foun d on the right side of th e mower, between the discharg e chute and the cutting deck.
10 SECTION 4: KNOW YOUR LAWN TRACTOR Figure 5 NOTE: Any reference in this manu al to the RIGHT or LEFT si de of the t ractor is observed from operat or’s position.
11 Thro tt l e C on t rol The throttle co ntrol lever is located on the right side of the tractor ’s dash panel. This lever controls the sp eed of the engine an d, when pushed all t he way forw ard, the choke control also. When set in a given position, the throttle will maintain a uniform engine speed.
12 Deck Lift Lever Found on your tract or’s right fender, the deck lift lever is used to change the height of the cut ting deck. To use, move the leve r to the le ft, then pla ce in the notch best suited for yo ur application.
13 SECTION 5: OPERATING YOUR LAWN TRACTOR Safety Interlock Switches This tractor is equipped with a safety interlock system for the pr otection of the operator. If t he interlock system should ever malfunction, do not operate the tractor. Contact an authorized Troy-Bilt service dealer.
14 Setting the Cutting Height Select the height posit ion of the cutting deck by placing the deck lift lever in any of the five different cutting height notche s on the right side of the fe nder.
15 • Release the parking brake by dep ressing the clutch-brake pedal and posit ioning the speed control lever in desired position. IMPORT ANT: First-tim e operators should use sp eed positions 1 or 2. Become completely familiar with the tractor’s opera tion and controls before operating t he tractor in higher speed positions.
16 Mowing WARNING: To help avoid blade contact or a thrown object injury, keep bystanders, helpers, childre n and pets at le ast 75 feet from the machine while it is in operation. Stop machine if anyone enters th e area. The following information will be helpful when using the cutting deck with your trac tor.
17 SECTION 6: MAKING ADJUSTMENTS WARNING: Ne v er attempt to mak e any adjustments while the engine is running, e xcept where specified in th e operator’ s manual . Leveling the Deck NOTE: Check the tractor ’s tire pressure before performing any de ck leveling adjustments.
18 P arking Brake Adjustment WARNING: Never attempt to a djust the brakes while the engin e is running. Always disengage PTO, mov e shift le v er into neutr al position, stop engine and remove key to prevent unint ended starti ng.
19 SECTION 7: MAINTAINING YOUR LAWN TRACTOR WARNING: Before perfor ming any maintenance or repair s, disengage PTO, move shift leve r into neutra l position, set parking brake, st op engine and remove key to prevent unint ended starti ng. Engine Refer to the Briggs & Stratton Operator/Owner Manual for engine maintenan ce instructions.
20 Cleaning the Engine And Deck Any fuel or oil spilled on the machin e should be wiped off promptly. Do NOT allo w debris to accumulate around the cooling fins of the engine or on any ot her part of the machine. IMPORT ANT: The use of a pressure washer to clean your tractor is NOT recommended.
21 SECTION 8: SERVICE Cutting Deck Removal To remove t he cutting d eck, procee d as follow s: • Place the PTO (Blade Engage) lever in the disengage d (OFF) position. • Engage the pa rking brake. • Lower the deck by movin g the deck lift lever into the bottom notch on the right fender.
22 Battery The battery is sealed and is maintenance-free. Acid levels cannot be checked. • Always keep the battery cables and terminals clean and free of corrosive build-up. • After cleaning the batt ery and terminals, apply a light coat of petroleum jelly or grease to both terminals.
23 Figure 17 • To properly sha rpen the cutting bla des, remove equal amounts o f metal from both ends of the blades alo ng the cutting edges, parall el to the trailing edge, at a 25° to 30° angle.
24 Changing the Deck Belt WARNING: Be sure to shut the engine off, remove ignit ion key, discon nect the spark plug wire(s) and ground against the engine to prevent unintended sta rting before removing the belt(s). WARNING: Avoid the possibility of a pinching injury.
25 SECTION 9: OFF-SEASON STORAGE Clean and lubricate the tr actor as instructed in Section 7: MAINTAINING YOUR LAWN TRACTOR on page 19 of this manual before sto ring for an extended per iod. WARNING: Drain fuel only into an approved contai ner outdoors, away from an open flame.
26 SECTION 11: TROUBLESHOOTING T r ouble P ossib le Cause(s) Corrective Action Engine fails to start PT O engaged. P arki ng brake not engaged. Spark plug wire(s) disco nnected. Throttle control le ver not in correct star ting posi tion. Choke not activ ated Fuel tank empty , or stale fuel.
27 NOTES.
28 MANUF A CTURER’S LIMITED W ARRANTY FOR: The limited warranty set forth be low is given by Troy-Bilt LLC with respect to new merchandise purch ased and used in the United States and/or its territo.
Un punto importante, dopo l’acquisto del dispositivo (o anche prima di acquisto) è quello di leggere il manuale. Dobbiamo farlo per diversi motivi semplici:
Se non hai ancora comprato il Troy-Bilt N779Pony è un buon momento per familiarizzare con i dati di base del prodotto. Prime consultare le pagine iniziali del manuale d’uso, che si trova al di sopra. Dovresti trovare lì i dati tecnici più importanti del Troy-Bilt N779Pony - in questo modo è possibile verificare se l’apparecchio soddisfa le tue esigenze. Esplorando le pagine segenti del manuali d’uso Troy-Bilt N779Pony imparerai tutte le caratteristiche del prodotto e le informazioni sul suo funzionamento. Le informazioni sul Troy-Bilt N779Pony ti aiuteranno sicuramente a prendere una decisione relativa all’acquisto.
In una situazione in cui hai già il Troy-Bilt N779Pony, ma non hai ancora letto il manuale d’uso, dovresti farlo per le ragioni sopra descritte. Saprai quindi se hai correttamente usato le funzioni disponibili, e se hai commesso errori che possono ridurre la durata di vita del Troy-Bilt N779Pony.
Tuttavia, uno dei ruoli più importanti per l’utente svolti dal manuale d’uso è quello di aiutare a risolvere i problemi con il Troy-Bilt N779Pony. Quasi sempre, ci troverai Troubleshooting, cioè i guasti più frequenti e malfunzionamenti del dispositivo Troy-Bilt N779Pony insieme con le istruzioni su come risolverli. Anche se non si riesci a risolvere il problema, il manuale d’uso ti mostrerà il percorso di ulteriori procedimenti – il contatto con il centro servizio clienti o il servizio più vicino.
