Manuale d’uso / di manutenzione del prodotto SR-26 del fabbricante Triax
Vai alla pagina of 22
SR-26 User Guide SR-26 ANALOG SATELLIT RECEIVER • 450 Pre-prog rammed channels (ASTRA, EU TELSAT/HOT BIRD, and other) • 2 SCART connectors (TV and VCR /DECODER) • OSD On-Screen- Display (Engl ish and German) • Parental lock and favour ites list • Frequency range 920 – 2150 M Hz • LNB control v ia 14/18 vol t, 22 kHz and Di SEqC 1.
- 1 - CONTENTS GENERAL PROPERTIES ........................................................................................... 2 SAFETY PRECAUTIONS ............................................................................................ 3 Power Source: .
- 2 - GENERAL PROPERTIES 1) User-friendly OSD menu control (2 languages) 2) DiSEqC 1.0 1 3) 2 Scart s (TV , VCR/Decoder) 4) Keypad control 5) Multi-functional remote control 6) Horizontal/vertical pol.
- 3 - SAFETY PRECAUTIONS Power Source: The receiver should be operated only from an 85-265 V AC, 50 Hz outlet. Please do not open the cover by yourself. There is high voltage in the set, which will danger your life. Please ask closest service for help.
- 4 - S A TELLITE ANTENNA T o have an excellent function of the sat-receiver , it is necessary to install the antenna correctly . Please avoid under all conditions to have a short circuit at the antenna cable conductor (LNB receiver). The sat-receiver is equipped with a LNB short-circuit pro- tection.
- 5 - Tuning your TV to the Sat-receiver: Put the switch T est/TV on the backside of the set to position TEST . The signal of the sat-receiver is tuned for channel 38(UHF) ex factory . Turn on your TV and tune it with the channel search (UHF area) to the test signal.
- 6 - FUNCTIONS ON THE FRONT P ANEL OF THE RECEIVER 1. STANDBY : If the receiver is in the standby position, you can turn on or off with this button. (last tuned program will be shown). 2. BUTTONS : Modification on selected pages aremade by these buttons.
- 7 - CONNECTIONS AND SER VICE ELEMENTS A T THE BACK SIDE OF THE SET 4. LNB Input Connection to outside unit (LNB). Use F connector . 5. T est signal switch The test signal can be switched with 6. Tuning of RF output channel between Ch 30-Ch 39 7 . ANT IN Input for terrestrial TV antenna 8.
- 8 - REMOTE CONTROL FUNCTIONS 13. ST ANDBY : The receiver can be turned on or off with this button. 14. (MUTE) : For the interruption of the sat-receiver sound (Mute). 15. 0-9 BUTTONS : For the direct se- lection of the program number , video and audio frequency .
- 9 - MENU INTERF AC E Menu System: When the MENU key is pressed on R/C, the main menu is entered. This menu page consists of four sub-menus. These are as following; P+ , P- are used to move up & down in the main menu as the other pages.
- 10 - In LNB NO line, 8 or 16 different LNB configurations (corresponding to the LNB NO line in the inst allation page) can be chosen by using + , - (8 for DiSEqC OFF , 16 for DiSEqC ON mode). At every LNB NO changing, the video frequency is driven accord- ing to selected LNB frequency .
- 11 - T o skip a program, PR. SKIP line is used. If it is enabled, the user can not reach this program with P+ , P- buttons. Only direct accessing is enabled to watch the skipped program. TV is used to return without saving, Store button to return to the program mode with saving for selected channel number .
- 12 - Language: On screen menus are in 2 languages. Language is selected with + or - and stored with Store button. Setup Menu: This menu can only be entered by pressing the P+ & P- buttons in front panel of the receiver together in the standby mode.
- 13 - In the DiSEqC line, DiSEqC mode can be changed to OFF/ON. While DiSEqC is switched to OFF , REPEA T automatically changes to 0, no DiSEqC signals are gen- erated and the installation menu is as in installation page description. The user can not reach REPEA T line in this mode.
- 14 - In LNB POWER line, LNB power can be switched to OFF in SMA TV applications that your receiver does not need to send any signals (e.g. 22kHz, T oneburst, DiSEqC) to receive the satellite broadcasting.
- 15 - CONNECTION OF THE SA T -RECEIVER WITH A SCART CABLE.
- 16 - CONNECTION OF THE SA T -RECEIVER WITH RF ANTENNA CABLE.
- 17 - TROUBLE SHOOTING.
- 18 - TECHNICAL SPECIFICA TIONS GENERAL LNB input .................................................. : 1 Supply V oltage .......................................... : 85-265 V AC, 50Hz Program Place ......................................... : 450 channels Input Frequency .
- 19 - RF MODULATOR UHF output conn. ...................................... : IEC male ANT input conn. ........................................ : IEC female S tandard ................................................... : P AL G Output channel ........
- 20 - SR-26 User Guide.
- 21 - SR-26 User Guide Triax A/S Bjørnkærv ej 3 DK-8783 Hornsy ld www.t ria x.c om.
Un punto importante, dopo l’acquisto del dispositivo (o anche prima di acquisto) è quello di leggere il manuale. Dobbiamo farlo per diversi motivi semplici:
Se non hai ancora comprato il Triax SR-26 è un buon momento per familiarizzare con i dati di base del prodotto. Prime consultare le pagine iniziali del manuale d’uso, che si trova al di sopra. Dovresti trovare lì i dati tecnici più importanti del Triax SR-26 - in questo modo è possibile verificare se l’apparecchio soddisfa le tue esigenze. Esplorando le pagine segenti del manuali d’uso Triax SR-26 imparerai tutte le caratteristiche del prodotto e le informazioni sul suo funzionamento. Le informazioni sul Triax SR-26 ti aiuteranno sicuramente a prendere una decisione relativa all’acquisto.
In una situazione in cui hai già il Triax SR-26, ma non hai ancora letto il manuale d’uso, dovresti farlo per le ragioni sopra descritte. Saprai quindi se hai correttamente usato le funzioni disponibili, e se hai commesso errori che possono ridurre la durata di vita del Triax SR-26.
Tuttavia, uno dei ruoli più importanti per l’utente svolti dal manuale d’uso è quello di aiutare a risolvere i problemi con il Triax SR-26. Quasi sempre, ci troverai Troubleshooting, cioè i guasti più frequenti e malfunzionamenti del dispositivo Triax SR-26 insieme con le istruzioni su come risolverli. Anche se non si riesci a risolvere il problema, il manuale d’uso ti mostrerà il percorso di ulteriori procedimenti – il contatto con il centro servizio clienti o il servizio più vicino.
