Manuale d’uso / di manutenzione del prodotto PD116P del fabbricante Acer
Vai alla pagina of 34
... English 1 Table of Contents T a ble of Contents .................................................................................................. 1 Usage Notice .....................................................................................
English... 2 Precautions Follow all warnings, precautions and maintenance as recommended in this user’s guide to maximize the life of your unit. Warning- Do not look into the projector’s lens when the lamp is on. The bright light may hurt your eyes.
... English 3 Do: Turn off the product before cleaning. Use a soft cloth moistened with mild detergent to clean the display housing. Disconnect the power plug from AC outlet if the product is not being used for a long period of time. Don’t: Block the slots and openings on the unit provided for ventilation.
English... 4 Product Features This product is an SVGA single chip 0.55” DLP TM projector. Outstanding features include: True SVGA, 800 x 600 addressable pixels Single chip DLP TM technology NTSC/PAL.
... English 5 Package Overview This projector comes with all the items shown below. Check to make sure your unit is complete. Contact your dealer immediately if anything is missing.
English... 6 1 3 4 6 7 8 9 5 2 Product Overview Main Unit Introduction 1. Control Panel 2. Zoom Ring 3. Focus Ring 4. Zoom Lens 5. Elevator Button 6. Elevator Foot 7.
... English 7 Control Panel Introduction 1. Menu 2. Temp Indicator LED 3. Lamp Indicator LED 4. Source 5. Re-Sync 6. Power and Indicator LED (Power LED) 7.
English... 8 Connection Ports Introduction 1. USB Connector 2. Audio Input Connector 3. PC Analog Signal/HDTV/Component Video Input Connector 4. S-Video Input Connector 5.
... English 9 Remote Control with Laser Pointer Introduction 1. Laser Pointer 2. Transmit Indicator Light 3. Empowering Key 4. Menu 5. Page Up 6. Page Down 7. Keystone - 8. Source 12 3 4 5 6 7 8 9 10 11 12 13 14 15 16 9. Freeze 10. Hide 11. Re-Sync 12.
English... 10 Connecting the Projector Installation 1.............................................................................................. Power Cord 2. .........................................................................................
... English 11 Powering On/Off the Projector Powering On the Projector 1. Remove the lens cap. 2 . Ensure that the power cord and signal cable are securely connected. The Power LED will flash blue . 3 . Turn on the lamp by pressing “Power” button on the control panel.
English... 12 Powering Off the Projector 1. Press the “Power” button to turn off the projector lamp, you will see a message “Power Off? Press Power again.” displayed on the projector’s screen. Press the “Power” button again to confirm, otherwise the message will disappear after 5 seconds.
... English 13 Adjusting the Projected Image Adjusting the Projector Image Height The projector is equipped with an elevator foot for adjusting the image height. To raise the image: 1. Press the elevator button 1 . 2. Raise the image to the desired height angle 2 , then release the button to lock the elevator foot into position.
English... 14 Adjusting the Projector Zoom / Focus You may turn the zoom ring to zoom in or out. To focus the image, rotate the focus ring until the image is clear. The projector will focus at distances from 3.9 to 32.8 feet (1.2 to 10.0 meters). This graph is for user’s reference only.
... English 15 Control Panel & Remote Control There are two ways for you to control the functions: Remote Control and Control Panel. Control Panel Remote Control User Controls Using the Control Panel Power Refer to the “Power On/Off the Projector” section on pages 11-12.
English... 16 Using the Remote Control Power Refer to the “Power On/Off the Projector” section on pages 11-12. Empowering Key Display the “Display Mode” submenu of the onscreen display menu to select display mode from PC, Movie, sRGB and User directly.
... English 17 On-Screen Display Menus The Projector has multilingual On Screen Display menus that allow you to make image adjustments and change a variety of settings. The projector will automatically detect the source. How to operate 1. To open the OSD menu, press “Menu” on the Remote Control or press “Menu”on the Control Panel.
English... 18 Personals (Computer / Video Mode) Edits user preferences by OSD interface. Edited user Info will display on lower left corner of the screen when projector is powered ON. 1.> Use the to select “Line1” function, and then press the “Menu” button.
... English 19 Language Language Choose the multilingual OSD menu . Use the or key to select your prefered language. Press “Menu” on the Remote Control or press “Menu”on the Control Panel to finalize the selection.
English... 20 Color (Computer / Video Mode) Display Mode There are many factory presets optimized for various types of images. PC : For computer or notebook. Movie : For home theater. sRGB : For PC standard color. User : Memorize user’s settings. Brightness Adjust the brightness of the image.
... English 21 Color (Computer / Video Mode) Color G Adjusts the green color. Color B Adjusts the blue color. White Segment Use the white Segment control to set the white peaking level of DM D chip. 0 stands for minimal segment, and 10 stands for maximum segment.
English... 22 Image (Computer Mode) User Controls Keystone Adjust image distortion caused by tilting projection. ( 15 degrees) Aspect Ratio Use this function to choose your desired aspect ratio. 4:3 : The input source will be scaled to fit the projection screen.
... English 23 Image (Video Mode) User Controls Keystone Adjust image distortion caused by tilting projection. ( 15 degrees) Aspect Ratio Use this function to choose your desired aspect ratio. 4:3 : The input source will be scaled to fit the projection screen.
English... 24 Audio (Computer / Video Mode) User Controls Volume Press the to decrease the volume. Press the to increase the volume. Mute Choose the “On” to turn mute on.
... English 25 Management (Computer / Video Mode) User Controls ECO Mode Choose “On” to dim the projector lamp which will lower power consumption, extend the lamp life and reduce noise. Choose “Off” to return normal mode. Menu Location Choose the Menu location on the display screen.
English... 26 Management (Computer / Video Mode) User Controls Source Lock When source lock is turned off, the projector will search for other signals if the current input signal is lost. When source lock is turned on, it will “Lock” the current source channel before you press “Source” button on remote control for next channel.
... English 27 Troubleshooting If you experience trouble with the projector, refer to the following information. If the problem persists, please contact your local reseller or service center.
English... 28 4 . Follow the above steps 1-2. Click on the “Advanced Properties” button. 5. Select the “Change” button under the “Monitor” tab .
... English 29 Problem: The image is outstretched when displaying 16:9 DVD. The projector automatically detects 16:9 DVD and adjusts the aspect ratio by digitizing to full screen with 4:3 default setting.
English... 30 Problem: Message Reminders ”Lamp is approaching the end of its useful life in full power operation. Replacement Suggested!” will be shown about 10 seconds when lamp life is going to deplete.
... English 31 Replacing the lamp The projector will detect the lamp life itself. It will show you a warning message “Lamp is approaching the end of its useful life in full power operation. Replacement Suggested!” When you see this message, changing the lamp as soon as possible.
English... 32 Lamp Changing Procedure: 1. Turn the power off the projector by pressing the Power button. 2. Allow the projector to cool down at least 30 minutes. 3. Disconnect the power cord. 4. Use a screwdriver to remove the screw from the cover. 1 5.
... English 33 Specifications The specs specified below are subject to change without notice. Regarding the final specs, please refer to Acer accounced marketing specs. Light Valve - Single Chip DLP TM Technology by Texas Instruments Lamp - 200W User Replaceable Lamp Number of Pixels - 800 pixels(H) X 600 lines(V) Displayable Color - 16.
English... 34 Appendices Mode Resoluti on V ert i cal Frequency ( Hz) Hor i zont al Frequency (kHz) 60 Hz 31.5 kHz 72 Hz 37.7 kHz 75 Hz 37.5 kHz VGA 640 x 480 85 Hz 43.3 kHz 56 Hz 35.1 kHz 60 Hz 37.9 kHz 72 Hz 48.1 kHz 75 Hz 46.9 kHz SVGA 800 x 600 85 Hz 53.
Un punto importante, dopo l’acquisto del dispositivo (o anche prima di acquisto) è quello di leggere il manuale. Dobbiamo farlo per diversi motivi semplici:
Se non hai ancora comprato il Acer PD116P è un buon momento per familiarizzare con i dati di base del prodotto. Prime consultare le pagine iniziali del manuale d’uso, che si trova al di sopra. Dovresti trovare lì i dati tecnici più importanti del Acer PD116P - in questo modo è possibile verificare se l’apparecchio soddisfa le tue esigenze. Esplorando le pagine segenti del manuali d’uso Acer PD116P imparerai tutte le caratteristiche del prodotto e le informazioni sul suo funzionamento. Le informazioni sul Acer PD116P ti aiuteranno sicuramente a prendere una decisione relativa all’acquisto.
In una situazione in cui hai già il Acer PD116P, ma non hai ancora letto il manuale d’uso, dovresti farlo per le ragioni sopra descritte. Saprai quindi se hai correttamente usato le funzioni disponibili, e se hai commesso errori che possono ridurre la durata di vita del Acer PD116P.
Tuttavia, uno dei ruoli più importanti per l’utente svolti dal manuale d’uso è quello di aiutare a risolvere i problemi con il Acer PD116P. Quasi sempre, ci troverai Troubleshooting, cioè i guasti più frequenti e malfunzionamenti del dispositivo Acer PD116P insieme con le istruzioni su come risolverli. Anche se non si riesci a risolvere il problema, il manuale d’uso ti mostrerà il percorso di ulteriori procedimenti – il contatto con il centro servizio clienti o il servizio più vicino.
