Manuale d’uso / di manutenzione del prodotto TL-WR940N del fabbricante TP-Link
Vai alla pagina of 112
TL-WR940N Wireless N Router Rev: 1.1.0 1910010566.
I COPYRIGHT & TRADEMARKS S pecifications are subject to change without notice. is a registered trademark of TP-LINK TECHNOLOGIES CO., L TD. Other brands and product names are trademarks or registered trademarks of t heir respective holders.
II FCC RF Radiation Exposure S t atement This equipment complies with FCC RF radiatio n exposure limits set forth for an uncontrolled environment. This device and its antenna must not be co-located or operating in conjunction with any other antenna or transmitter .
III Industry Canada S t atement This device complies with RSS-210 of the Industry Canada Rules. Operation is subject to the following two conditions: (1)This device may not cause harmful interference, and (2)This device must accept any interference rec e ived, including interference that may cause undesired operation.
TP-LINK TECHNOLOGIES CO., L TD DECLARA TION OF CONFORMITY For the following equipment: Product Description: Wireless N Router Model No.: TL-WR940N T rademark: TP-LINK We declare under our own respon s.
I CONTENTS Package Content s .................................................................................................................................... 1 Chapter 1. Introduction ...............................................................
II 4.6.5 Wireless S tati stics ................................................................................................... 45 4.7 DHCP ............................................................................................................
III 4.15.1 Comexe.cn DDNS .................................................................................................. 78 4.15.2 Dyndns.org DDNS .................................................................................................. 79 4.
TL-WR940N Wireless N Router Package Contents The following items should be found in your package: ¾ TL-WR940N Wireless N Router ¾ DC Power A dapter for TL-WR940N Wireless N Router ¾ Quick Install a.
TL-WR940N Wireless N Router Chapter 1. Introduction Thank you for choosing the TL-WR940N Wireless N Router . 1.1 Overview of the Router Th e TL-WR940N Wireless N Router i nt egr at es 4-port Switch, Fi re wal l, N A T -Ro ut er and Wireless AP .
TL-WR940N Wireless N Router 1.3 Main Features ¾ Complies with IEEE 802.1 1n to provide a wireless data rate of up to 300Mbp s. ¾ One 10/100M Auto-Negotiation RJ45 WAN port, four 10/100M Auto-Negotiation RJ45 LAN ports, supporting Auto MDI/MDIX. ¾ Provides WP A/WP A2, WP A-PSK/WP A2-PSK authentic ation, TKIP/AES encryption security .
TL-WR940N Wireless N Router Name Statu s Indication Off Power is off. PWR On Power is on. On The Router is initializing or maybe has a system error . Flashing The Router is working properly . SYS Off The Router has a system error . Off The Wireless function is disabled.
TL-WR940N Wireless N Router ¾ RESET : There are two ways to reset to the Router's factory defaults: 1) Use the Factory Default s function on System T ools -> Factory Defaults page in the Router's Web-based Utility .
TL-WR940N Wireless N Router Chapter 2. Connecting the Router 2.1 System Requirement s ¾ Broadband Internet Access Service (DSL/Cable/Ethernet) ¾ One DSL/Cable Modem that has an RJ 45 connector (which is not necessary if the Router is connected directly to the Ethernet.
TL-WR940N Wireless N Router Figure 2-1 Hardware Installation of the TL- WR940N Wireless N Router -7-.
TL-WR940N Wireless N Router Chapter 3. Quick Installation Guide This chapter will show you how to configure the basi c functions of your TL-WR940N Wireless N Router using Quick Setup Wiz ar d within minutes. 3.1 TCP/IP Configuration The default domain name of the TL -WR940N Wireless N Router is http://tplinklogin.
TL-WR940N Wireless N Router Figure 3-1 Success result of Ping command ¾ If the result displayed is similar to the Figure 3-2 , it means the connec tion between your PC and the Router is failed. Figure 3-2 Failure result of Ping command Please check the connection following these step s: 1.
TL-WR940N Wireless N Router 2. Is the TCP/IP configur ation for your PC correct? ) Note: If the Router's IP addres s is 192. 168.0.1, your PC's IP address must b e within the range of 192.168.0.2 ~ 192.168.0.254. 3. Is the default LAN IP of the Router correct? ) Note: If the LAN IP of the modem connec ted with your ro uter is 192.
TL-WR940N Wireless N Router 2. After successfully login, you can click the Quick Setup to quickly configure your Router . Figure 3-5 Quick Setup 3. Click Next , and then W AN Connection T ype page will appear , shown in Figure 3-6 .
TL-WR940N Wireless N Router Figure 3-7 Quick Setup – PPPoE ¾ User Name and Password - Enter the User Name and Passw ord provided by your ISP. These fields are case sensitive.
TL-WR940N Wireless N Router Figure 3-9 Quick Setup – MAC Clone 3 ） If the connection type detect ed is S t atic IP , the next screen will appear as shown in Figure 3-10 Figure 3-10 Quick Setup - S tatic IP ¾ IP Address - This is the WAN IP address as seen by external users on the Internet (including your ISP).
TL-WR940N Wireless N Router Figure 3-1 1 Quick Setup – Wireless ¾ Wireless Radio - Enable or disable the wireless radi o choosing from the pull-down list. ¾ Wireless Network Name - Enter a value of up to 32 c haracters. The same name of SSID (Service Set Identificat ion) must be assigned to all wireless devices in your network.
TL-WR940N Wireless N Router ¾ Channel - This field determines which operati ng frequency will be used. The default channel is set to Auto , so the AP will choose the best channel automatically. It is not necessary to change the wireless channel unless you notice interference problems with another nearby access point.
TL-WR940N Wireless N Router Figure 3-13 Quick Setup - Finish -16-.
TL-WR940N Wireless N Router Chapter 4. Configuring the Router This chapter will show each Web p age's ke y functions and the c onfiguration way . 4.1 Login After your successful login, you will see the fif t een main menus on the left of the Web-based utility .
TL-WR940N Wireless N Router Figure 4-1 Router S tatus 4.3 Quick Setup Please refer to 3.2 Quick Installation Guide . 4.4 QSS This section will guide you add a new wireless device to an existing net work quickly by QSS (Quick Secure Setup) function.
TL-WR940N Wireless N Router a). Choose menu “ QSS ”, you will see the next screen (shown in Figure 4-2 ). Figure 4-2 QSS ¾ QSS St atus - Enable or disable the QSS function here. ¾ Current PIN - The current value of the Router's PIN displayed here.
TL-WR940N Wireless N Router Step 3: W ait for a while until the next screen appears. Click Fini sh to complete the QSS configuration. The QSS Configuration Screen of Wireless Adapter Method T wo: Step 1: Press the QSS button on the front panel of the Router .
TL-WR940N Wireless N Router The QSS Configuration Screen of Wireless Adapter Step 3: W ait for a while until the next screen appears. Click Finish to complete the QSS configuration.
TL-WR940N Wireless N Router Figure 4-3 Add A New Device Step 2: Choose Press the button of the new device in two minutes and click Connect . Step 3: For the confi guration of the wirele ss adapter , please choose Push the button on my access point in the configuration utility of t he QSS as below , and click Next .
TL-WR940N Wireless N Router The QSS Configuration Screen of Wireless Adapter II. By PIN If the new device supports Wi-Fi Protected Se tup and the PIN method, you can add it to the network by PIN with the following two methods.
TL-WR940N Wireless N Router The QSS Configuration Screen of Wireless Adapter ) Note: In this example, the default PIN code of this adapter is 16952898 as the above figure shown. Method T wo: Enter the PIN from my Router Step 1: Get the Current PI N code of the Router in Figure 4-2 (each Router has its unique PIN code.
TL-WR940N Wireless N Router ) Note: The default PIN code of the Router can be found in its label or the QSS configuration screen as Figure 4-2 . c). Y ou will see the following screen when the new device successfully connected to the network. ) Note: 1.
TL-WR940N Wireless N Router Figure 4-5 W AN - Dynamic IP This page displays the W AN IP p arameters a ssigned dynamically by your ISP , including IP address, Subnet Mask, Default Gateway , etc. Click the Renew button to renew the IP parameters from your ISP .
TL-WR940N Wireless N Router Figure 4-6 W AN - S tatic IP ¾ IP Address - Enter the IP address in dotted-decimal not ation provided by yo ur ISP . ¾ Subnet Mask - Enter the subnet Mask in dotted-decim al notation provided by your ISP , usually is 255.
TL-WR940N Wireless N Router Figure 4-7 W AN - PPPoE ¾ User Name/Passw ord - Enter the User Name and Password provided by your ISP . These fields are case-sensitive.
TL-WR940N Wireless N Router ¾ Time-based Connecting - The connection will only be establis hed in the period from the start time to the end time (both are in HH:MM format). ) Note: Only when you have confi gured the system time on System Tools -> Time page, will the Time-based Connecting function can take effect.
TL-WR940N Wireless N Router ¾ Detect Online Interval - The Router will detect Access Conc entrator online at every interval. The default value is “0”.
TL-WR940N Wireless N Router QLD - qld.bigpond.net.au ¾ MTU Size - The normal MTU (Maximum T ransmission Unit) val ue for most Ethernet networks is 1500 Bytes.
TL-WR940N Wireless N Router Figure 4-10 L2TP Settings ¾ User Name/Passw ord - Enter the User Name and Password provided by your ISP . These fields are case-sensitive. ¾ Dynamic IP/ St atic IP - Choose either as you are given by your ISP . Click the Connect button to connect immediately .
TL-WR940N Wireless N Router ¾ Connect Manually - Y ou can configur e the Router to ma ke it connect or disconnect manually . After a specified period of inactivity ( Max Idle T ime ), the Router will.
TL-WR940N Wireless N Router ¾ Dynamic IP/ S tatic IP - Choose either as you are given by your ISP and enter the ISP’ s IP address or the domain name. If you choose static IP and enter the domain name, you shoul d also enter the DNS assigned by your ISP .
TL-WR940N Wireless N Router The Router can not detect PPTP/L2T P/BigPond connections with your ISP. If your ISP uses one of these protocols, then you must configure your connection manually. 4.5.2 LAN Choose menu “ Network → LAN ”, you can configure the IP parameters of the LAN on the screen as below .
TL-WR940N Wireless N Router ¾ WAN MAC Address - This field displays the current MAC address of the WAN port. If your ISP requires you to register the MAC address, please enter the correct MAC address into this field in XX-XX-XX-XX-XX-XX form at(X is any hexadecimal digit).
TL-WR940N Wireless N Router Figure 4-15 Wireless Settings ¾ Wireless Netw ork Name - Enter a value of up to 32 characters. The same name of SSID (Service Set Identification) must be assi gned to all wireless devices in your network.
TL-WR940N Wireless N Router ¾ Mode - Select the desired mode. The default setting is 11bgn mixed. 11b only - Select if all of your wireless clients are 802.11b. 11g only - Select if all of your wireless clients are 802.11g. 11n only- Select only if all of your wireless clients are 802.
TL-WR940N Wireless N Router ¾ Key type - This option should be chosen according to the AP's security configuration.It is recommended that the security type is the same as your AP's security type ¾ WEP Index - This option should be chosen if the key type is WEP(ASCII) or WEP(HEX).
TL-WR940N Wireless N Router ¾ Disable Security - If you do not want to use wireless secu rity, select this check box, but it’s strongly recommended to choose one of t he following modes to enable security. ¾ WEP - It is based on the IEEE 802. 11 standard.
TL-WR940N Wireless N Router version 2) automatically based on the wireless stat ion's capability and request. • Encryption - You can select either Automatic , or TKIP or AES.
TL-WR940N Wireless N Router Figure 4-19 • PSK Passphrase - You can enter ASCII characters between 8 and 63 characters or 8 to 64 Hexadecimal characters. • Group Key Up date Period - Specify the group key update interval in secon ds. The value should be 30 or above.
TL-WR940N Wireless N Router Figure 4-21 Add or Modify Wireless MAC Address Filtering entry To add or modify a MAC Address Filtering entry, follo w these instructions: 1. Enter the appropriat e MAC Address into the MAC Address field. The format of the MAC Address is XX-XX-XX-XX-XX-XX (X is an y hexadecimal digit).
TL-WR940N Wireless N Router to access for Filtering Rules. 3. Delete all or disable all entries if there are any entri es already. 4. Click the Add New.
TL-WR940N Wireless N Router ¾ RTS Threshold - Here you can specify the RTS (Req uest to Send) Threshold. If the packet is larger than the specified RTS Thre shold size, the router will send RTS frames to a particular receiving station and negotiate the sending of a dat a frame.
TL-WR940N Wireless N Router ¾ MAC Address - The connected wireless station's MAC address ¾ Current Status - The connected wireless stati on's running status, one of ST A-AUTH / STA-ASSOC /.
TL-WR940N Wireless N Router Figure 4-25 DHCP Settings ¾ DHCP Server - Enable or Disable the DHCP server . If you dis able the Server , you must have another DHCP server within your network or else you must configure the compute r manually . ¾ St art IP Address - S pecify an IP address for the DHCP Server to start with when assigning IP addresses.
TL-WR940N Wireless N Router 4.7.2 DHCP Clients List Choose menu “ DHCP → DHCP Client s List ”, you can view the info rmation about the clients attached to the Router in the next screen (shown in Figure 4-26 ) .
TL-WR940N Wireless N Router ¾ MAC Address - The MAC address of the PC for whic h you want to reserve IP address. ¾ Assigned IP Address - The IP address of the Router reserved. ¾ Status - The status of this entry either Enabled or Disabled . To Reserve IP addresses: 1.
TL-WR940N Wireless N Router Port T riggering , DMZ and UPnP . Click any of them, and you will be able to configure the corresponding function. 4.8.1 Virtual Servers Choose menu “ Forwarding → Virtual Servers ”, you can view a nd add virtual servers in the next screen (shown in Figure 4-30 ).
TL-WR940N Wireless N Router Figure 4-31 Add or Modify a Virtual Server Entry ) Note: If your computer or server has more than one type of available service, please select another service, and enter the same IP Addr ess for that computer or server . To modify or delete an existing entry: 1.
TL-WR940N Wireless N Router Figure 4-32 Port T riggering Once the Router is configured, the operation is as follows: 1. A local host makes an outgoing connection us ing a destination port number defined in the T rigger Port field.
TL-WR940N Wireless N Router either TCP or UDP , or All. 5. Select Enable in Statu s field. 6. Click the Save button to save the new rule. Figure 4-33 Add or Modify a T riggering Entry T o modify or delete an existing entry: 1. Click the Modify in the entry you want to modify .
TL-WR940N Wireless N Router Figure 4-34 DMZ T o assign a computer or server to be a DMZ server: 1. Click the Enable radio button 2. Enter the local host IP Address in the DMZ Host IP Address field 3. Click the Save button. ) Note: After you set the DMZ host, the firewa ll related to the host will not work.
TL-WR940N Wireless N Router • External Port - External port, which the router opened for the application. • Protocol - Shows which type of protocol is opened. • Internal Port - Internal port, which the router opened for local host. • IP Address - The UPnP device that is cu rrently accessing the router.
TL-WR940N Wireless N Router Figure 4-37 Basic Security ¾ Firewall - A firewall protects your network from t he outside world. Here you can enabl e or disable the Router’s firewall. z SPI Firewall - SPI (Stateful Packet Inspection, also known as dynamic packet filtering) helps to prevent cyber attacks by tracking mo re state per session.
TL-WR940N Wireless N Router ¾ ALG - It is recommended to enable Application Layer Gatew ay (ALG) because ALG allows customized Network Address T ranslation (NA T ) traversal filters to be plugged into the gateway to support address and port translation fo r certain application layer "control/data" protocols such as FTP , TFTP , H323 etc.
TL-WR940N Wireless N Router UDP Flood and ICMP-Flood. ¾ DoS Protection - Denial of Service protection. Check the Enable or Disable button to enable or disable the DoS protecti on function.
TL-WR940N Wireless N Router Figure 4-39 Local Management By default, the radio button “ All the PCs on the LAN are allowed to access the Router's Web-Based Utility ” is checked.
TL-WR940N Wireless N Router Figure 4-40 Remote Management ¾ Web Management Port - Web browser access normally uses the standard HTTP service port 80. This Router's default remote manag ement web por t number is 80. For greater security, you can change the remote management web port to a custom port by entering that number in the box provided.
TL-WR940N Wireless N Router Figure 4-41 Parental Control Settings ¾ Parental Control - Check Enable if you want this function to take effect, otherwise check Disable . ¾ MAC Address of Parental PC - In this field, enter the MAC address of the controlling PC, or you can make use of the Copy To Above button below.
TL-WR940N Wireless N Router 6. In the Status field, you can select Enabled or Disabled to enable or disable your entry. 7. Click the Save button. Click the Enable All button to enable all the rules in the list. Click the Disable All button to disable all the rules in the list.
TL-WR940N Wireless N Router 3. Click “ Parental Control ” menu on the left to go back to the Add or Modi fy Parental Control Entry page: z Click Add Ne w ... button. z Enter 00-11-22-33-44-AA in the MAC Address of Child PC field. z Enter “Allow Google” in the Website Description field.
TL-WR940N Wireless N Router Figure 4-45 Access Control Rule Management ¾ Enable Internet Access Control - Select the check box to enable the Internet Access Control function, so the Default Filter Policy can take effect. ¾ Rule Name - Here displays the name of the rule and this name is unique.
TL-WR940N Wireless N Router 6. In the Action field, select Deny or Allow . 7. In the Status field, select Enabled or Disabled to enable or disable your entry. 8. Click the Save button. Click the Enable All button to enable all the rules in the list. Click the Disable All button to disable all the rules in the list.
TL-WR940N Wireless N Router 4. Click “ Access Control → Rule ” in the left to return to the Access Control Rule Management page. Select “ Enable Internet Access Control ” and choose "Den y the packets not specified by any access cont rol policy to pass through the Router".
TL-WR940N Wireless N Router 2) In LAN IP Address field, enter the IP address. z If you select MAC Address, the screen shown is Figure 4-49 . 1) In Host Description field, create a unique description for the host (e.g. Host_1). 2) In MAC Address field, enter the MAC address.
TL-WR940N Wireless N Router 4.11.3 Target Choose menu “ Access Control → Ta r g e t ”, you can view and set a T a rget list in the screen as shown in Figure 4-50 .
TL-WR940N Wireless N Router Click the Next button to go to the next page, or click the Previous button return to the previous page. Figure 4-51 Add or Modify an Access T arget Entry Figure 4-52 Add or.
TL-WR940N Wireless N Router 4.11.4 Schedule Choose menu “ Access Control → Schedule ”, you can view and set a Schedule list in the next screen as shown in Figure 4-53 .
TL-WR940N Wireless N Router Figure 4-54 Advanced Schedule Settings For example : If you desire to restrict the inter net activities of host with MAC address 00-11-22-33-44-AA to access www.google.com only from 18: 00 to 20:00 on Saturday and Sunday , you should first follow the settings below: 1.
TL-WR940N Wireless N Router 4.12.1 Static Routing List Choose menu “ Advanced Routing → St atic Routing List ”, and then you c an configure the static route in the next screen (shown in Figure 4-56 ). A static route is a pre-determined path that network information must travel to reach a specific host or network.
TL-WR940N Wireless N Router Click the Delete button to delete the entry . Click the Enable All button to enable all the entries. Click the Disable All button to disable all the entries.
TL-WR940N Wireless N Router There are two submenus under the Ba ndwidth Control menu as shown in Figure 4-5 9 . Click any of them, and you will be able to configure the co rresponding function. T he detailed explanations for each submenu are provided below .
TL-WR940N Wireless N Router ¾ Egress bandwidth - This field displays the max and mix uploa d bandwidth through the W AN port, the default is 0. ¾ Ingress bandwidth - This field displays the max and mix download bandwidth through the W AN port, the default is 0.
TL-WR940N Wireless N Router Figure 4-64 Binding Setting ¾ MAC Address - The MAC address of the controll ed computer in the LAN. ¾ IP Address - The assigned IP address of the cont rolled computer in the LAN. ¾ Bind - Check this option to enable ARP binding for a specific device.
TL-WR940N Wireless N Router 2. Enter the MAC Address or IP Address. 3. Click the Find button in the page as shown in Figure 4-66 . Figure 4-66 Find IP & MAC Binding Entry Click the Enable All button to make all entries enabled. Click the Delete All button to delete all entries.
TL-WR940N Wireless N Router Click the Bind All button to bind all the current items, available after enable. Click the Load All button to load all items to the IP & MAC Bind ing list.
TL-WR940N Wireless N Router Figure 4-68 Comexe.cn DDNS Settings To set up for DDNS, follow these instructions: 1. T ype the Domain Name received from your dynamic DNS service provider . 2. T ype the User Name for your DDNS account. 3. T ype the Password for your DDNS account.
TL-WR940N Wireless N Router Figure 4-69 Dyndns.org DDNS Settings To set up for DDNS, follow these instructions: 1. T ype the User Name for your DDNS account. 2. T ype the Password for your DDNS account. 3. T ype the Domain Name you received from dynamic DNS service provider here.
TL-WR940N Wireless N Router Figure 4-70 No-ip.com DDNS Settings To set up for DDNS, follow these instructions: 1. T ype the User Name for your DDNS account. 2. T ype the Password for your DDNS account. 3. T ype the Domain Name you received from dynamic DNS service provider .
TL-WR940N Wireless N Router Password, System Log and St atistics. Click any of them, and you w ill be able to configure the corresponding function. The detailed explanat ions for each submenu are provided below . 4.16.1 Time Settings Choose menu “ System T ools → T ime Settings ”, you can configure the time on the following screen.
TL-WR940N Wireless N Router 1. Select your local time zone. 2. Enter the Date in Month/Day/Y ear format. 3. Enter the Ti me in Hour/Minute/Second format. 4. Click Save . T o set time automatically: 1. Select your local time zone. 2. Enter the address or domain of the NTP Server I or NTP Server II .
TL-WR940N Wireless N Router Figure 4-73 Diagnostic T ools ¾ Diagnostic T ool - Check the radio button to select one diagnostic too. z Ping - This diagnostic tool troubl eshoots connectivity , reac hability , and name resolution to a given host or gateway .
TL-WR940N Wireless N Router The Diagnostic Result s page displays the result of diagnosis. If the result is similar to the following screen, the connectivity of t he Internet is fine. Figure 4-74 Diagnostic Results ) Note: Only one user can use this tool at one time.
TL-WR940N Wireless N Router ) Note: 1. New firmware vers ions are posted at http://www.tp-link.com and can be downloaded for free. There is no need to upgrade the firmware unle ss the new firmware has a new feature you want to use.
TL-WR940N Wireless N Router Figure 4-77 Backup & Restore Configuration ¾ Click the Backup button to save all configuration setti ngs as a backup file in your local computer . ¾ T o upgrade the Router's configurat ion, follow these instructions.
TL-WR940N Wireless N Router 4.16.7 Passw ord Choose menu “ System T ools → Pas sw ord ”, you can change the factory default user name and password of the Router in the nex t screen as shown in Figure 4-77.
TL-WR940N Wireless N Router Figure 4-80 System Log ¾ Auto Mail Feature - Indicates whether auto mail feature is enabled or not. ¾ Mail Settings - Set the receiving and sending mailbox address, server address, validation information as well as the timetable for Auto Mail Feature, as shown in Figure 4-81 .
TL-WR940N Wireless N Router Figure 4-81 Mail Account Settings z From - Your mail box address. The Router would connect it to send logs. z To - Recipient’s address. The destination mail box where the logs would be received. z SMTP Server - Your smtp server.
TL-WR940N Wireless N Router ¾ Save Log - Click to save all the logs in a txt file. ¾ Mail Log - Click to send an email of current l ogs manually according to the address and validation information set in Mail Settings. ¾ Clear Log - All the logs will be deleted from the R outer permanently, not ju st from the page.
TL-WR940N Wireless N Router Statistics Table: IP A ddess/MAC Address The IP Address and MAC address are displa yed with relate d statistics Packets The number of packets received an d transmitted by the Router. Total Bytes The number of bytes received and transm itted by the Router.
TL-WR940N Wireless N Router Appendix A: FAQ 1. How do I configure the Router to access Internet by ADSL users? 1) First, configure the ADSL Modem configured in RFC1483 bridg e model. 2) Conn ect the Ethernet cable from your ADSL Modem to the W AN port on the Router .
TL-WR940N Wireless N Router "W AN" submenu. On the W AN page, select “Dynamic IP” for "W AN Connection T ype", finish by clicking “Save”. 2) Some ISPs require that you register the MAC Address of your adapter , which is connected to your cable/DS L Modem during installation.
TL-WR940N Wireless N Router Figure A-5 Add or Modify a Virtual server Entry ) Note: Your opposite side should call your WAN IP , which is displayed on the “Status” page. 4) How to enable DMZ Host: Log in to the Router , click the “ Forwarding ” menu on the left of your browser , and click " DMZ " submenu.
TL-WR940N Wireless N Router Figure A-7 Basic Security 4. I want to build a WEB Server on the LAN, w hat should I do? 1) Because the WEB Server port 80 will inte rfere with the WEB management port 80 on the Router , you must change the WEB management port number to avoid interference.
TL-WR940N Wireless N Router field of the Web browser. 3) Log in to the Router , click the “ Forwarding ” menu on the left of your browse r , and click the " Virtual Servers " submenu.
TL-WR940N Wireless N Router Appendix B: Configuring the PCs In this section, we’ll introduce how to install and configure the TCP/IP correctly in Windows XP . First make sure your Ethernet Ada pter is wo rking, refer to the adapter’s manual if needed.
TL-WR940N Wireless N Router Figure B-2 5) The following TCP/IP Pr operties window will display and the IP Address tab is open on this window by default.
TL-WR940N Wireless N Router Figure B-3 ¾ Setting IP address manually 1 Select Use the following IP address radio button. And the fo llowing items available 2 If the Router's LAN IP addre ss is 192.168.0.1, spec ify the IP address as 192.168.0.x (x is from 2 to 254), and Subnet mask is 255.
TL-WR940N Wireless N Router Figure B-4 -101-.
TL-WR940N Wireless N Router Appendix C: Specifications General S tandards IEEE 802.3, 802.3u, 802.1 1b, 802.1 1g and 802.1 1n Protocols TCP/IP , PPPoE, DHCP , ICMP , NA T , SNTP Ports One 10/100M Auto.
TL-WR940N Wireless N Router Appendix D: Glossary ¾ 802.11n - 802.11n builds upon previous 802.11 standar ds by adding MIMO (multiple-input multiple-output).
TL-WR940N Wireless N Router identifying a wireless local area network. Fo r the wireless devices in a network to communicate with each other, all devices must be configured with the same SSID. This is typically the configuration parameter for a wireless PC card.
Un punto importante, dopo l’acquisto del dispositivo (o anche prima di acquisto) è quello di leggere il manuale. Dobbiamo farlo per diversi motivi semplici:
Se non hai ancora comprato il TP-Link TL-WR940N è un buon momento per familiarizzare con i dati di base del prodotto. Prime consultare le pagine iniziali del manuale d’uso, che si trova al di sopra. Dovresti trovare lì i dati tecnici più importanti del TP-Link TL-WR940N - in questo modo è possibile verificare se l’apparecchio soddisfa le tue esigenze. Esplorando le pagine segenti del manuali d’uso TP-Link TL-WR940N imparerai tutte le caratteristiche del prodotto e le informazioni sul suo funzionamento. Le informazioni sul TP-Link TL-WR940N ti aiuteranno sicuramente a prendere una decisione relativa all’acquisto.
In una situazione in cui hai già il TP-Link TL-WR940N, ma non hai ancora letto il manuale d’uso, dovresti farlo per le ragioni sopra descritte. Saprai quindi se hai correttamente usato le funzioni disponibili, e se hai commesso errori che possono ridurre la durata di vita del TP-Link TL-WR940N.
Tuttavia, uno dei ruoli più importanti per l’utente svolti dal manuale d’uso è quello di aiutare a risolvere i problemi con il TP-Link TL-WR940N. Quasi sempre, ci troverai Troubleshooting, cioè i guasti più frequenti e malfunzionamenti del dispositivo TP-Link TL-WR940N insieme con le istruzioni su come risolverli. Anche se non si riesci a risolvere il problema, il manuale d’uso ti mostrerà il percorso di ulteriori procedimenti – il contatto con il centro servizio clienti o il servizio più vicino.
