Manuale d’uso / di manutenzione del prodotto TL-WA601G del fabbricante TP-Link
Vai alla pagina of 42
TL-WA601G 108M Wireless Access Point Rev: 1.0.3 1910010121.
COPYRIGHT & TRADEMARKS Specifications are subjec t to change without notice. ® is a registered trademark of TP-LINK TECHNOLOGIES CO., LTD. Other brands and product names are trade marks or registered trademarks of t heir respective holders.
FCC STATEMENT This equipment has been tested and found to comply wi th the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limit s are designed to pro-vide reasonable protection against harmful interference in a residential installation.
National Restrictions 2400.0-2483.5 MHz Country Restriction Reason/remark Bulgaria General authorization requ ired for outdoor use and public service France Outdoor use limited to 10 mW e.i.r.p. w ithin the b and 2454-2483.5 MHz Military Radiol ocation use.
CONTENTS Package Contents .................................................................................................... 1 Chapter 1 Introduction ........................................................................................... 2 1.1 Product Overview .
3.7.4 Reboot .............................................................................................................. 30 3.7.5 Password .......................................................................................................... 31 3.
Package Contents The following items should be found in your package: ¾ One TL-WA601G 108Mbps Wireless Access Point ¾ One AC power Adapter for TL-WA601G 108Mbps Wireless Access Point ¾ One Resource CD , including: z This User Guide z Other Helpful Information ) Note: Make sure that the package cont ains the above it ems.
TL-WA601G 108M Wireless Access Point User G uide Chapter 1 Introduction Thank you for choosing the TL-WA601 G 108Mbps Wireless Access Point. 1.1 Product Overview This AP provides smooth c onnectivity between Ethernet wired networks and radio-equippe d wireless devices.
TL-WA601G 108M Wireless Access Point User G uide 1.3 Conventions The AP or TL-WA601G, or device mentioned in t his User guide stands for TL-WA601G 108M Wireless Access Point without any explanations. Parameters provided in the pictures are just re ferences for setting up the product, which may differ from the actual situation.
TL-WA601G 108M Wireless Access Point User G uide 2.2 The Back Panel Figure 2-2 ¾ Wireless antenna ¾ Factory Default Reset button ¾ There are three ways to reset the AP's factory defaults: • Use the Factory Defaults function on System Tools -> Factory Defaults page in the AP's Web-based Utility.
TL-WA601G 108M Wireless Access Point User G uide ¾ Not cluttered or crowded. There should be at leas t 2 inches (5 cm) of clear space on all sides of the AP ¾ Well ventilated (especially if it is in a closet) ¾ Operating temperature: 0 ℃ ~40 ℃ (32 ℉ ~104 ℉ ) ¾ Operating Humidity: 10% ~90%RH, Non-condensing 2.
TL-WA601G 108M Wireless Access Point User G uide Subnet Mask is 255.255.255.0. Thes e values can be seen from the LAN. They can be changed as you desire, as an example we use the default values for description in this guide. Connect the local PCs to the LAN ports on the AP and configure the IP address manually for your PCs.
TL-WA601G 108M Wireless Access Point User G uide Figure 2-6 4. Configure the IP addr ess manually. Click OK. Figure 2-7 7.
TL-WA601G 108M Wireless Access Point User G uide 1) Open TCP/IP Properties of the LAN card in your PC, enter the IP address as 192.168.1.* (* is any value between 2 to 254, Subnet mask is 255.255.255.0, Gateway is 192.168.1.1, DNS address is the value provided by ISP).
TL-WA601G 108M Wireless Access Point User G uide Chapter 3 Software Configuration This User Guide recommends using the “Quick Installation Guide” for first-time installation.
TL-WA601G 108M Wireless Access Point User G uide There are the detailed expl anations for each web page' s key functions below. 3.2 S t atus The Status page displays the AP's current status and configuration.
TL-WA601G 108M Wireless Access Point User G uide 3.3 Network You can configure the IP param eters of Network on this page. Figure 3-4 Network ¾ Typ e - Choosing dynamic IP to get IP address from DHCP server, or choosing static IP to config IP address manually.
TL-WA601G 108M Wireless Access Point User G uide 3.4.1 Basic Settings The basic settings for the wirele ss network are set on this page, Figure 3-6 : Figure 3-6 Wireless Settings ¾ SSID - Enter a value of up to 32 characters. T he same name (SSID) must be assigned to all wireless devices in your network.
TL-WA601G 108M Wireless Access Point User G uide ) Note: Limited by local law regulations, version for North America doe s not have region selection option. The wireless basic settings for this version are shown below. ) Note: To apply any settings you have altered on the page, please click the Save button, and wait the AP reboot automatically.
TL-WA601G 108M Wireless Access Point User G uide Figure 3-7 Wireless Mode Settings 14.
TL-WA601G 108M Wireless Access Point User G uide ¾ Disable Wireless - The wireless of this AP can be enabled or disabled to allow wireless stations access.
TL-WA601G 108M Wireless Access Point User G uide Figure 3-8 Wireless repeating 2. Verify the wireless security parameters for all access points, if any.
TL-WA601G 108M Wireless Access Point User G uide • Both use the same Channel and security settings if security is in use. • Verify connectivity across the LAN 1 and LAN 2.
TL-WA601G 108M Wireless Access Point User G uide and printers with any other PCs or servers c onnected to any of the three LAN segments. • Wireless stations will not be able to connect to the TL-WA601G A ccess Points in the illustration above.
TL-WA601G 108M Wireless Access Point User G uide 3.4.4 Security Settings You can select one of the following security options: Figure 3-12 Wireless Securities ¾ Disable Security - The wireless security function can be enabl ed or disabled. If disabled, the wireless stations will be able to connect the AP without encryption.
TL-WA601G 108M Wireless Access Point User G uide strongly that you choose one of fo llowing options to enable security. ¾ WEP - Select 802.11 WEP security. • Type - You can select one of following types: 1) Automatic - Select Shared Key or Open System authentication ty pe automatically based on the wireless station's capability and request.
TL-WA601G 108M Wireless Access Point User G uide 2) WPA-PSK - Pre-shared key of WPA. 3) WPA2-PSK - Pre-shared key of WPA2. • PSK Passphrase - You can enter a passphrase bet ween 8 and 63 characters long. • Group Key Update Period - Specify the group key update interval in seconds.
TL-WA601G 108M Wireless Access Point User G uide the radio button Allow the stations not specified by any enabled entries in the list to access , otherwise, select the radio button Deny the stations not specified by any enabled entries in the list to access .
TL-WA601G 108M Wireless Access Point User G uide Click the Next button to go to the next page and click the Previous button to return to the previous page.
TL-WA601G 108M Wireless Access Point User G uide ) Note: If you select the radio button Allow the stations not specified by any enabled entries in the list to access for Filtering Rules, the wireless station B will sti ll not be able to access the AP, however, other wireless stations that are not in the list will be abl e to access the AP.
TL-WA601G 108M Wireless Access Point User G uide There are three submenus under the DHCP menu (shown in Figure 3-16 ): DHCP Settings , DHCP Clients List and Address Reservation. Click any of them, a nd you will be able to configure the corresponding function.
TL-WA601G 108M Wireless Access Point User G uide 3.5.2 DHCP Clients List This page shows Client Name, MAC Address, Assigned IP and Lease Time for each DHCP Client attached to the AP ( Figure 3-18 ): F.
TL-WA601G 108M Wireless Access Point User G uide ¾ Assigned IP Address - The IP address of the AP reserved. To Reserve IP addresses: 1. Click the Add New... button to add a new Address Reservation entry. 2. Enter the MAC address (The format for t he MAC Address is XX-XX-XX-XX-XX-XX.
TL-WA601G 108M Wireless Access Point User G uide ¾ RTS threshold - RTS/CTS Threshold, the packet size t hat is used to determine if RTS/CTS should be sent. ¾ Fragmentation threshold - The maximum packet size used for fragmentation. ¾ Beacon Interval - The interval time between two successive beacons.
TL-WA601G 108M Wireless Access Point User G uide Figure 3-22 Firmware Upgrade New firmware versi ons ar e posted at www.tp-link.com and can be downloaded for free. If the AP is not experiencing difficulties, ther e is no need to d ownload a more re cent firm ware version, unless that version has a new feature that you want to use.
TL-WA601G 108M Wireless Access Point User G uide • The default Password : admin • The default IP Address : 192.168.1.1 • The default Subnet Mask : 255.255.255.0 ) Note: Any settings you have saved will be lost when the default settings are restored.
TL-WA601G 108M Wireless Access Point User G uide • Change LAN IP Address. (Syste m will reboot automatically) • DHCP service function. • Static address assignment of DHCP server. • Upgrade the firmware of the AP (s ystem will reboot automatically).
TL-WA601G 108M Wireless Access Point User G uide Figure 3-27 System Log The AP can keep logs of all tra ffic. You can query the logs to find what happened to the AP. Click the Refresh button to refresh the logs. Click the Clear ALL button to clear all the logs.
TL-WA601G 108M Wireless Access Point User G uide Appendix A: Glossary 108M Super G ™ WLAN Transmission Technology - 108M Super G ™ WLAN Transmission Technology employs multiple perform ance-enhanc.
TL-WA601G 108M Wireless Access Point User G uide WEP ( W ired E quivalent P rivacy) - A data privacy mechanism bas ed on a 64-bit or 128-bit or 152-bit shared key algorithm, as des cribed in the IEEE 802.
TL-WA601G 108M Wireless Access Point User G uide Appendix B: Specifications General Standards and Protocols IEEE 802.3, 802.3u, 802.11b and 802. 11g, TCP/IP, DHCP Safety & Emission FCC 、 CE Port.
TL-WA601G 108M Wireless Access Point User G uide Appendix C: FAQ 1. No lights are lit on the access point. It takes a few seconds for the power indicator to light up. Wait a minute and check the power light status on the access point if the access point has no power.
Un punto importante, dopo l’acquisto del dispositivo (o anche prima di acquisto) è quello di leggere il manuale. Dobbiamo farlo per diversi motivi semplici:
Se non hai ancora comprato il TP-Link TL-WA601G è un buon momento per familiarizzare con i dati di base del prodotto. Prime consultare le pagine iniziali del manuale d’uso, che si trova al di sopra. Dovresti trovare lì i dati tecnici più importanti del TP-Link TL-WA601G - in questo modo è possibile verificare se l’apparecchio soddisfa le tue esigenze. Esplorando le pagine segenti del manuali d’uso TP-Link TL-WA601G imparerai tutte le caratteristiche del prodotto e le informazioni sul suo funzionamento. Le informazioni sul TP-Link TL-WA601G ti aiuteranno sicuramente a prendere una decisione relativa all’acquisto.
In una situazione in cui hai già il TP-Link TL-WA601G, ma non hai ancora letto il manuale d’uso, dovresti farlo per le ragioni sopra descritte. Saprai quindi se hai correttamente usato le funzioni disponibili, e se hai commesso errori che possono ridurre la durata di vita del TP-Link TL-WA601G.
Tuttavia, uno dei ruoli più importanti per l’utente svolti dal manuale d’uso è quello di aiutare a risolvere i problemi con il TP-Link TL-WA601G. Quasi sempre, ci troverai Troubleshooting, cioè i guasti più frequenti e malfunzionamenti del dispositivo TP-Link TL-WA601G insieme con le istruzioni su come risolverli. Anche se non si riesci a risolvere il problema, il manuale d’uso ti mostrerà il percorso di ulteriori procedimenti – il contatto con il centro servizio clienti o il servizio più vicino.
