Manuale d’uso / di manutenzione del prodotto TL-SG1008P del fabbricante TP-Link
Vai alla pagina of 16
User Guide TL-SG1008P 8-Port Gigabit Desktop Switch with 4-Port PoE Rev ˖ 1.0.0 7106504137.
.
COPYRIGHT & TRADEMARKS Specifications are subject to change without notice. is a registered trademark of TP-LINK TECHNOLOGIES CO., LTD. Other brands and p roduct names are trademarks or registered trademarks of their respective holders.
FCC STATEMENT This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference when th e equipment is operated in a commercial environment.
Any changes or modifications not expressly approved by the party responsible for compliance could void the user’s authorit y to operate the equipment. CE Mark Warning This is a class A product. In a domestic environment, this product may cause radio interference, in which case the user may be required to take adequate measures.
CONTENT Package Contents ...................................................... 1 Chapter 1. Introductio n of the Product .......................... 2 1.1 Overview of the Produc t ...................................... 2 1.2 Convention ...............
1 Package Contents The following items should be found in your box: ¾ One TL-SG1008P 8-Port Gigabit Desktop Switch with 4-Port PoE ¾ One DC Power Adapter ¾ Four rubber cushions to be used under the Switch ¾ This User Guide Note Make sure that the box contains the above items.
2 Chapter 1. Introduction of the Product Thank you for choosing the TL-S G1008P 8-Port Gigabit Desktop Switch with 4-Port PoE. 1.1 Overview of the Product The TL-SG1008 P 8-Port Gigabit Desktop Switch.
3 1.2 Convention The Switch or TL-SG1008P mentioned in this User Guide stands for TL-SG1008P 8-Po rt Gigabit Desktop Switch with 4-Port PoE without any explanation. 1.3 Features ¾ Complies with IEEE802.3, IEEE802.3u, IEEE802.3ab, IEEE802.3x, IEEE802.
4 Chapter 2. Installation During the installation procedure, please only use the accessories equipped with the Switch. 2.1 Mounting the Switch on a Desk To install the Switch, please follow the steps: 1) Place the Switch on a flat desk. 2) Remove the adhesive backing papers from the rubber cushions.
5 2) Then, the 1000Mbps and Link/Act LED indicators will flash momentarily for one second, which represents a resetting of the system. Note If the LED indicators don’t respond as described above, please check the power supply and its connection. Chapter 3.
6 Name Status Indication On (green) There is a PoE PD connected to the p ort, which supply power su ccessfully. Flashing (green) The PoE power circui t may be in sh ort or the power current may be overloaded. PoE ports (ports1~4) Off No PD is connected to the corresponding port, or no power is supplied a ccording to the pow er limits of the port.
7 Note If all PoE PDs power consumption is >= 53W, a priority * will be arranged among the PoE ports like port-1 = port-2 = port-3 > port-4, then the system will cut off the power of the lowest-priority port. *Priority: This function will help protect the system when the system power is overloaded.
8 ¾ PoE Ports (1-4): These ports support PoE function which integrates power and data onto one Ethernet cable. Once the device you connect to the Switch is identified, the Switch will supply power through the PoE port, and then you can use it as a 10/100/1000Mbps Auto-Negotiation RJ45 Ethernet port.
9 Appendix A: Specifications General Standard IEEE802.3, IEEE80 2.3u, IEEE802.3a b IEEE802.3x, IEEE802.3a f Protocol CSMA/CD Ethernet: 10Mbps (Half Duplex ) 20Mbps (Full Duplex) Fast Ethernet: 100Mbps.
10 MAC Address Learning Automatically learning, automatically aging 10Base-T: 14880pps/Port 100Base-Tx: 148800pps/Por t Frame Filter Rate 1000Base-T: 1488000pps/Port 10Base-T: 14880pps/Port 100Base-Tx: 148800pps/Por t Frame Forward Rate 1000Base-T: 1488000pps/Port Environmental and Physical Power Consumption 5.
Un punto importante, dopo l’acquisto del dispositivo (o anche prima di acquisto) è quello di leggere il manuale. Dobbiamo farlo per diversi motivi semplici:
Se non hai ancora comprato il TP-Link TL-SG1008P è un buon momento per familiarizzare con i dati di base del prodotto. Prime consultare le pagine iniziali del manuale d’uso, che si trova al di sopra. Dovresti trovare lì i dati tecnici più importanti del TP-Link TL-SG1008P - in questo modo è possibile verificare se l’apparecchio soddisfa le tue esigenze. Esplorando le pagine segenti del manuali d’uso TP-Link TL-SG1008P imparerai tutte le caratteristiche del prodotto e le informazioni sul suo funzionamento. Le informazioni sul TP-Link TL-SG1008P ti aiuteranno sicuramente a prendere una decisione relativa all’acquisto.
In una situazione in cui hai già il TP-Link TL-SG1008P, ma non hai ancora letto il manuale d’uso, dovresti farlo per le ragioni sopra descritte. Saprai quindi se hai correttamente usato le funzioni disponibili, e se hai commesso errori che possono ridurre la durata di vita del TP-Link TL-SG1008P.
Tuttavia, uno dei ruoli più importanti per l’utente svolti dal manuale d’uso è quello di aiutare a risolvere i problemi con il TP-Link TL-SG1008P. Quasi sempre, ci troverai Troubleshooting, cioè i guasti più frequenti e malfunzionamenti del dispositivo TP-Link TL-SG1008P insieme con le istruzioni su come risolverli. Anche se non si riesci a risolvere il problema, il manuale d’uso ti mostrerà il percorso di ulteriori procedimenti – il contatto con il centro servizio clienti o il servizio più vicino.
