Manuale d’uso / di manutenzione del prodotto MC220L del fabbricante TP-Link
Vai alla pagina of 16
User Guide MC200CM MC210CS MC220L Gigabit Ethernet Media Converter.
COPYRIGHT & TRADEMARKS S pecifications are subject to change without notice. is a registered trademark of TP-LINK TECHNOLOGIES CO., L TD. Other brands and product names are tradem arks or registered trademarks of their respective holders.
i CONTENTS Package Contents........................................................................... 1 1. Introduction ............................................................................. 1 2. Features.......................................
1 Package Content s Before starting using the products, make sure what you have is what you ordered. The Converter includes: ¾ One Converter ¾ One AC-DC Power Adapter (DC9V/600mA) ¾ One Us er Guide 1. Introduction MC200CM, MC210CS and MC220L are Gigabit Ethernet Media Converters.
2 Rear Panel Front Panel MC220L Note: This media convertor can also be powered by 5VDC Adapter . 2. Features ¾ Comply with IEEE 802.3ab and IEEE 802.3z. ¾ Provide one SC/LC fiber co nnector and one RJ45 connector . Please check the table in p age 3 for the accurate c onnector of each model.
3 ¾ FX port supports hot-swappable(only for MC220L). Connectors and Netw ork Cables Supported The connectors and network cables supported by the converter are listed as follows. ¾ Connectors: RJ-45, SC, LC. ¾ Network Cables : Cat.5 T wisted-Pair(below abbreviated as TP), 9/125um Single-mode fiber , 62.
4 When you take a look at these indicators, you will know what’s happening on your network. Name Status Indication On Power on PWR Off Power of f On There’s a valid link for FX Port. FX LINK Off There’s no valid link for FX Port. On There’s a valid link for TP Port.
5 ¾ AUTO : The FX port operates in Auto-Negotiation mode. Note: Be sure the opposite end is using the same setting. When using t wo converters at the same time, the two converte rs must be set to FORCE mode . When connected to other products, such as TL- SL2210WEB or TL-SL2428WEB, the converter must be set to Auto- Negotiation mode .
6 Note: Either two MC200CM or two MC210CS could cooperate. MC220L can be plugged in with two kinds of SFP modu les, single-mode or multi-mode. Plug the SFP module into MC220L T ransmits and receives data between two MC220L Note: T wo MC220 L with the same SFP module could cooperate.
7 T ransmits and receives data between MC220L and MC200CM/MC210CS Note: MC220L could be connected to MC200CM or M C210CS, however , the SFP module in MC220L must use the same mode and the same wavelength as the opposite end. (Pleas e refer to the table below) And the connection fiber must be LC-SC fiber .
8 Note: For the correct connection between 2 Media Converters, please refer to connection diagram in 4.1 ---- two MC200CM, two MC210CS, two MC220L or one MC220L with another MC200CM/MC210CS. 2. Another effective application is to place one converter directly between a 1000Base-TX network and a fiber optic (FX) device.
9 2. Connection of two Converters or a Converter and a 1000Base- FX Device: Use a SC fiber cable to connect the t wo Converters’ SC connectors or the SC connec ters of a Converter and a 1000Base-FX Device.
10 POWER LED lit on. Then you can operate it as the boxlike Media Converter of the MC series. 5. T roubleshooting If you encounter some problems when you install or use this product, please try to solve the problem according to the following steps. If it still doesn’t work, please contact your dealer or ask for help from our technical support.
11 6. Appendix: S pecifications MC200CM S tandards and Protocols IEEE802.3ab, IEEE 802.3z, IEEE 802.3 x Media Interface SC, RJ45 Cat.5: 100m Max. Distance Multi-mode Fiber: 0.
12 MC220L S tandards and Protocols IEEE802.3ab, IEEE 802.3z, IEEE 802.3 x Media Interface LC, RJ45 Cat.5: 100m Max. Distance Multi/Single-mode Fiber: 0.
7106503685.
Un punto importante, dopo l’acquisto del dispositivo (o anche prima di acquisto) è quello di leggere il manuale. Dobbiamo farlo per diversi motivi semplici:
Se non hai ancora comprato il TP-Link MC220L è un buon momento per familiarizzare con i dati di base del prodotto. Prime consultare le pagine iniziali del manuale d’uso, che si trova al di sopra. Dovresti trovare lì i dati tecnici più importanti del TP-Link MC220L - in questo modo è possibile verificare se l’apparecchio soddisfa le tue esigenze. Esplorando le pagine segenti del manuali d’uso TP-Link MC220L imparerai tutte le caratteristiche del prodotto e le informazioni sul suo funzionamento. Le informazioni sul TP-Link MC220L ti aiuteranno sicuramente a prendere una decisione relativa all’acquisto.
In una situazione in cui hai già il TP-Link MC220L, ma non hai ancora letto il manuale d’uso, dovresti farlo per le ragioni sopra descritte. Saprai quindi se hai correttamente usato le funzioni disponibili, e se hai commesso errori che possono ridurre la durata di vita del TP-Link MC220L.
Tuttavia, uno dei ruoli più importanti per l’utente svolti dal manuale d’uso è quello di aiutare a risolvere i problemi con il TP-Link MC220L. Quasi sempre, ci troverai Troubleshooting, cioè i guasti più frequenti e malfunzionamenti del dispositivo TP-Link MC220L insieme con le istruzioni su come risolverli. Anche se non si riesci a risolvere il problema, il manuale d’uso ti mostrerà il percorso di ulteriori procedimenti – il contatto con il centro servizio clienti o il servizio più vicino.
