Manuale d’uso / di manutenzione del prodotto Archer C7 del fabbricante TP-Link
Vai alla pagina of 146
Archer C7 AC1750 Wireless Dual Ban d Gigabit Rout er R EV1.0.0 1910010809.
COPYRIG HT & TRADEMARKS S pecifications are subject t o change without notice. is a registered trade mark of TP - LINK TECHNOLOGIES CO., L TD. Other brands and product names are trademarks or registered tradem arks of their res pective holders.
FCC S T A TEMENT This equipment has bee n tested and found t o comply with the lim its for a Class B digital device, pursuant to part 15 of the FCC Rules. Thes e limits are designed to provide r easonable protec tion against harmf ul interference i n a residential installation.
CE Mark W arn ing This is a class B product. In a domesti c environment, this product may caus e radio interfere nce, in which case the user m ay be required to take adequate m easures.
Canadian Compliance St atement This device compli es with Industry Canada l icense - exempt RSS standard(s). Operation i s subject to the following t wo conditions : (1) This device m ay not cause interfere nce, and (2) This device m ust accept any interferenc e, including interfe rence that may caus e undesired operation of the devic e.
安全諮詢及注意事項 ●請使用原裝電源供應器或只能按照本產品注明的電源類型使用本產品。 ●清潔本產品之前請先拔掉電源線。請勿使用液體、噴霧.
TP - LI NK TECHNOLOG IES CO., L TD TP- LINK TECHNOLOGIES CO., L TD. Building 24 (floors 1, 3, 4, 5) , and 28 (floors 1 - 4) Central S cience and T echn ology Park, Shennan Rd, Nanshan, Shenzhen, China DECL ARA TION OF CONF ORMITY For the following equi pment: Product Descri ption: AC1750 Wireles s Dual Band Gigabi t Router Model No.
- I - CONTENTS Package Contents ..................................................................................................... 1 Chapter 1. Introduction ......................................................................................... 2 1.
- II - 4.7.1 Wireless Setti ngs .......................................................................................... 47 4.7.2 WPS ............................................................................................................. 49 4.
- III - 4.16 Advanc ed Routing .................................................................................................... 99 4.16.1 S tatic Routing List ........................................................................................
Archer C7 AC1750 Wireless Du al Band Gigabit Router - 1 - Package Contents The following i tem s should be found in your packag e: Archer C7 AC175 0 Wireless Dual Band Gigabit Router DC P ower.
Archer C7 AC1750 Wireless Du al Band Gigabit Router - 2 - Chapter 1. Introduction 1.1 Overview of th e router The Archer C7 A C1750 Wireless Dual Band Gi gabit Router integrates 4- port Swit ch, Firewall, N AT - router and Wireless AP .
Archer C7 AC1750 Wireless Du al Band Gigabit Router - 3 - 1.2 Conventions The rout er or Archer C7 menti oned in t his gui de stands for Archer C7 AC1750 Wireless Dual Band Gigabit Router without any explanat ion . 1.3 Main Features Complies wit h IEEE 802.
Archer C7 AC1750 Wireless Du al Band Gigabit Router - 4 - 1.4 Panel Layout 1.4.1 The Front Panel Figure 1-1 LEDs on t he front panel The router ’s LEDs are located on the front panel (View from left to right) . Name St atus Indication ( Power ) Off Power is o ff .
Archer C7 AC1750 Wireless Du al Band Gigabit Router - 5 - ( WPS ) Slow Flash A wireles s device is connect ing to the network by WPS function. T his process will las t in the first 2 minutes. On A wireless device has been success fully added to the network by WPS function .
Archer C7 AC1750 Wireless Du al Band Gigabit Router - 6 - Internet : This port is where you wi ll connect the DSL/cable Modem , or Ethernet . Ethernet (1 , 2, 3, 4 ): These ports ( 1 , 2, 3, 4 ) connect the router to the local PC(s) . WPS/ R eset : Pressing thi s button for less than 5 seconds enable s the WPS f un ction.
Archer C7 AC1750 Wireless Du al Band Gigabit Router - 7 - Chapter 2. Connecting the router 2.1 System Require ment s B roadband Internet Access Service (DSL/ Cable/Ethernet) One DS L/Cable Mod.
Archer C7 AC1750 Wireless Du al Band Gigabit Router - 8 - power on the Route r . (Bef ore you power on the R outer , pl ease make sure your c omputer is NOT connected to any other wireles s network.
Archer C7 AC1750 Wireless Du al Band Gigabit Router - 9 - Chapter 3. Quick Inst allation Guide This chapter will show you how to confi gure the basic functions of your AC1750 W ireless Dual Band Gigabit Rout er using Quick S etup Wiz ar d within m inutes.
Archer C7 AC1750 Wireless Du al Band Gigabit Router - 10 - If the resul t displayed is s imilar to F igure 3-2 , it means t he connection bet ween your PC and the router fail ed . Figure 3-2 Failure res ult of Ping command Please check the con nection follow ing these steps: 1.
Archer C7 AC1750 Wireless Du al Band Gigabit Router - 11 - 3.2 Quick Installation Guide With a Web - based utility , it is easy to configure a nd manage the AC1750 Wireless Dual B and Gigabit Router .
Archer C7 AC1750 Wireless Du al Band Gigabit Router - 12 - Figure 3-5 Quick Setup 3. Click Next , and then WAN Connecti on Type page will appear, shown in Figure 3-6. Figure 3-6 WAN Connect ion Type The router provides Auto - Detect function and supports thre e popular ways PPPoE , Dynamic IP , and Static IP and to connect to the Internet.
Archer C7 AC1750 Wireless Du al Band Gigabit Router - 13 - Figure 3-7 Quick S etup - S tatic IP I P Address - This is the WAN IP address as seen by external users on the Internet (including your IS P). Your ISP will provide you with the IP address you need to enter here.
Archer C7 AC1750 Wireless Du al Band Gigabit Router - 14 - Con firm Password - Enter t he password agai n to make sure t hat the password i s correct. Check the radio butt on of Dynamic / Static IP to activate the secondary connection i f your ISP provides an extra Conne ction type suc h as Dynamic/Stat ic IP to connect to a local area network.
Archer C7 AC1750 Wireless Du al Band Gigabit Router - 15 - 5) I f the connect ion type detected is PP TP /Russia n PP TP , t he next screen wil l appear as shown in Figure 3- 10 .
Archer C7 AC1750 Wireless Du al Band Gigabit Router - 16 - Figure 3- 11 Quick Setup – Dual Band Selec tion 2. 4GHz - Y ou can use the 2.4GHz band t o connect to many clas sic wireless devic es like gaming consoles , laptops, DVRs, ect. 5GHz - T his band is less crowded a nd is used for time - sensitive mus ic, video streaming or gaming.
Archer C7 AC1750 Wireless Du al Band Gigabit Router - 17 - Regi on - S elect your region f rom the drop - down lis t. This field spec ifies the regio n where the wireles s function of the rout er can be used. It may be illegal to use the wireless func tion of the router in a region other tha n one of those s pecified in t his field.
Archer C7 AC1750 Wireless Du al Band Gigabit Router - 18 - Chan nel - This fi eld determines which operati ng frequency will be us ed. It is not necessary to change t he wireless channel unless you notice i nterference problem s with another nearby acces s point.
Archer C7 AC1750 Wireless Du al Band Gigabit Router - 19 - Disable Securit y - The wi reless security f unction can be enabl ed or disabled. If disabled, the wirel ess stations will be able to connect the router with out encrypt ion.
Archer C7 AC1750 Wireless Du al Band Gigabit Router - 20 - Chapter 4. Configuring the rout er This chapter wil l show each Web page's key functions and the c onfiguration way . 4.1 Login After your successful login, you wil l see the main menus on the left of the Web - based utility .
Archer C7 AC1750 Wireless Du al Band Gigabit Router - 21 - Figure 4-1 S tatus.
Archer C7 AC1750 Wireless Du al Band Gigabit Router - 22 - 4.3 Quick Setup Please refer to 3. 2 Quick Installation Guide . 4.4 Network Figure 4-2 the Network menu There are three subm enus under the Network m enu (shown in Fi gure 4-2 ): WA N , LAN a nd MAC Clone .
Archer C7 AC1750 Wireless Du al Band Gigabit Router - 23 - This page displays the W AN IP p arameters assigned dynami cally by your ISP , including IP addr ess, S ubnet Mask, Default Gat eway , etc. Clic k the Re new button to renew the IP parameters from your ISP .
Archer C7 AC1750 Wireless Du al Band Gigabit Router - 24 - S ubnet Mask - Enter the subnet Mask in dotted - decim al notation provide d by your IS P , usually is 255.255. 255.0. Defaul t Gatewa y - (Opt ional) Enter t he gateway IP address in dott ed - decimal notation provided by your ISP .
Archer C7 AC1750 Wireless Du al Band Gigabit Router - 25 - Disabled - The S econdary Connection i s disabled by default , so there is PPPoE connection only . This is recomm ended. Dynamic IP - Y ou can check this radio but ton to use D yna mic IP as the sec ondary connection t o connect to the loc al area network provide d by ISP .
Archer C7 AC1750 Wireless Du al Band Gigabit Router - 26 - Figure 4-6 PPPoE Advanced Set tings MTU Size - The default MTU size is “ 1480 ” bytes, which is usually f ine . It i s not recommended that you change the default MTU S ize unless required b y your ISP .
Archer C7 AC1750 Wireless Du al Band Gigabit Router - 27 - Figure 4-7 WA N - BigPond Cable User N ame/Passw ord - Enter the User Name an d Password provi ded by your ISP . These fields are case - s ensitive. Auth Server - Enter t he authenticating s erver IP address or host name.
Archer C7 AC1750 Wireless Du al Band Gigabit Router - 28 - Connect Manually - Y ou can c lick the Connect / Disconnect button to connect / dis connect immediately .
Archer C7 AC1750 Wireless Du al Band Gigabit Router - 29 - D ynamic IP/ St atic IP - Choose eit her as you are given by your ISP . Click the Connect button to connect immediately .
Archer C7 AC1750 Wireless Du al Band Gigabit Router - 30 - Figure 4-9 PPTP Settin gs User N ame/Passw ord - Enter the Us er Name and Pass word provided by your ISP . These fields are case - s ensitive. D ynamic IP / St atic IP - Cho ose either as you ar e given by your ISP and enter the IS P’s IP address or the domain na me.
Archer C7 AC1750 Wireless Du al Band Gigabit Router - 31 - Interne t connect ion to remain active at al l times, enter “0” in the Max Idle T ime field. Otherwise, enter t he number of minutes you want to have elapsed before yo ur Internet connection term inates.
Archer C7 AC1750 Wireless Du al Band Gigabit Router - 32 - Figure 4- 10 LAN M AC Address - The physical addres s of the router , as seen from the LAN. The value can't be changed. I P Address - Enter the IP address of your router or res et it in dotted - deci mal notation (factory defaul t: 192.
Archer C7 AC1750 Wireless Du al Band Gigabit Router - 33 - WAN M AC Address - This f ield displays the current M AC address of the Intern et port . If your ISP requires you to register t he MAC addres s, please enter the c orrect MAC addre ss into this field in XX - XX - XX - XX - XX - XX f ormat (X is any hexadecimal digit ).
Archer C7 AC1750 Wireless Du al Band Gigabit Router - 34 - 4.6 Wireless 2.4GHz Figure 4- 13 Wireles s menu There are six s ubmenus under the Wireless menu (s hown in Figure 4- 13 ): Wireless Settings , WPS , Wireless Security , Wireless MAC Filtering , Wireless Advan ced and Wireless St atistics .
Archer C7 AC1750 Wireless Du al Band Gigabit Router - 35 - Regi on - Select your region from t he drop - down list. This field s pecifies the region where t he wireless functi on of the router can be used. It may be illegal to use the wireless fun c tion of the router in a regio n other than one of those speci fied in this fiel d.
Archer C7 AC1750 Wireless Du al Band Gigabit Router - 36 - E nable SSID Broadca st - When wi reless client s survey the local area for wireles s networks to associate with, they will detect the SSI D broadcast by the router . If you select the Enable SSID Broadcast c heckbox, the Wireles s router will broadcast its name (SSID) on the air .
Archer C7 AC1750 Wireless Du al Band Gigabit Router - 37 - Figure 4- 16 WPS WPS St atus - Enable or disable the WP S function here. Cur rent PIN - The current val ue of the router 's PIN is dis played here. The default PIN of the router can be f ound in the label or User Guide.
Archer C7 AC1750 Wireless Du al Band Gigabit Router - 38 - Figure 4- 17 Figure 4- 18 Add A New Devic e Step 2: P ress and hold the WPS butt on of the client devi ce. Step 3: The Wi - Fi Protected Setup LED flas hes for two minutes during the Wi - Fi Protec ted Setup process.
Archer C7 AC1750 Wireless Du al Band Gigabit Router - 39 - III. E nter the router ’ s PI N on your client device Use this method if your c lient device as ks for the router ’ s PIN number .
Archer C7 AC1750 Wireless Du al Band Gigabit Router - 40 - Di sable Securit y - If you do not want to use wireless security, check this radio button.
Archer C7 AC1750 Wireless Du al Band Gigabit Router - 41 - Figure 4- 22 WP A/WP A2 - Enterprise • Radius Server I P - Enter the IP address of the Radius s erver. • Radius Port - E nter the port number of t he Radius server . • Radius Passw ord - Enter the password for the R adius s erver.
Archer C7 AC1750 Wireless Du al Band Gigabit Router - 42 - • Ke y T ype - You can select the WEP key length (64 - bit, or 128 - bit, or 152 - bit.) for encryption.
Archer C7 AC1750 Wireless Du al Band Gigabit Router - 43 - Figure 4- 25 Add or Modify Wireless MAC Address Filtering entr y To add or modify a MAC Address F iltering entr y, follow these instruction s: 1. Enter the appropriat e MAC Address into t he MAC Address fi eld.
Archer C7 AC1750 Wireless Du al Band Gigabit Router - 44 - 2. Selec t the radio button “ Allow the en tries specified b y an y enabled entri es in the lis t to access ” for Fi ltering Rules . 3. Delete al l or disable all en tries if there are any ent ries already.
Archer C7 AC1750 Wireless Du al Band Gigabit Router - 45 - Beacon Interval - Enter a value between 20 - 10 00 milliseconds for Beacon I nterval here . The beacons are the packets s ent by the router to sync hronize a wireless network. B eacon Interval value determ ines the tim e interval of the beacons .
Archer C7 AC1750 Wireless Du al Band Gigabit Router - 46 - Figure 4- 27 Wireles s S t atistics MAC Address - The c onnected wireles s station's MAC addres s Current Status - T he connecte.
Archer C7 AC1750 Wireless Du al Band Gigabit Router - 47 - 4.7.1 Wireless Settings Choose menu “ Wirele ss 5 GHz → Wireless Settings ” , you c an configure t he basic setti ngs for the wireless net work of 5 GHz on t his page .
Archer C7 AC1750 Wireless Du al Band Gigabit Router - 48 - Mode - Sel ect the desired mode. 11 a only - Select if all of your wirel ess clients are 802.11 a. When 802.1 1 a mode is selected , onl y 802.11 a wireles s stations c an connect to the router .
Archer C7 AC1750 Wireless Du al Band Gigabit Router - 49 - WEP Index - This option shoul d be chosen if the key type is WEP(ASCII) or WEP(HEX).I t indicates the index of t he WEP key. Auth Type - This option s hould be chosen if the key type is WEP(ASCII) or WEP(HEX).
Archer C7 AC1750 Wireless Du al Band Gigabit Router - 50 - I. Use the Wi - Fi Pr otected Setup Button Use this method if your c lient device has a Wi - Fi Protected S etup button . Step 1: Press t he WPS /Rese t bu tton on the bac k panel of the router , as shown in Fi gure 4- 32 .
Archer C7 AC1750 Wireless Du al Band Gigabit Router - 51 - Step 2: Enter the P IN number from the cli ent device in the field on the above WPS screen. Then click Connect button. Step 3: “ Connect succes sfully ” will appear on the s creen of Figure 4- 34 , which means the client device has succ essfully connected t o the router .
Archer C7 AC1750 Wireless Du al Band Gigabit Router - 52 - Figure 4- 35 Wireles s Security Di sable Secur ity - If you do not want to us e wireless securit y, check this radio but ton. But it ’ s strongly recom mended to choose one of the f ollowing modes to enable secur ity.
Archer C7 AC1750 Wireless Du al Band Gigabit Router - 53 - Figure 4- 36 WP A/WP A2 – Personal • PSK Pass word - You can enter AS CII characters between 8 and 63 chara cters or 8 to 64 Hexadecimal characters.
Archer C7 AC1750 Wireless Du al Band Gigabit Router - 54 - WEP - It is based on the IEEE 802. 11 standard . I f you check this radio button, you will f ind a notice in red as s how in Figure 4- 38 . Figure 4- 38 WEP • Type - you can choose the type f or the WEP security on the drop - down li st.
Archer C7 AC1750 Wireless Du al Band Gigabit Router - 55 - 4.7.4 Wireless MAC Filtering Choose menu “ Wireless → MAC Filtering ” , you can c ontrol the wireless access by configur ing the Wireless MAC Fil tering function, shown in Figure 4- 24 .
Archer C7 AC1750 Wireless Du al Band Gigabit Router - 56 - 1. Enter the appropriat e MAC Address into t he MAC Address field. The format of the MAC Address is XX - XX - XX - XX - XX - XX (X is any hexadecimal digit). For example: 00 - 0A - EB - B0 - 00 - 0B.
Archer C7 AC1750 Wireless Du al Band Gigabit Router - 57 - 4.7.5 Wireless Advanced Choose menu “ Wireles s → Wireless Advance d ” , you can confi gure the advanc ed s ettings of your wireless net work. Figure 4- 41 Wireles s Advanced Transmit Pow er - Here you can specify the t ransmit power of router .
Archer C7 AC1750 Wireless Du al Band Gigabit Router - 58 - (DTIM). A DTIM field i s a countdown fiel d informing cl ients of the next wi ndow for list ening to broadcast and mult icast messages. When t he router has buf fered broadcast or mult icast messages for ass ociated client s, it sends the next D TIM with a DTI M Interval value.
Archer C7 AC1750 Wireless Du al Band Gigabit Router - 59 - Note: This page will be refres hed automatic ally every 5 seconds . 4.8 Guest Network Figure 4- 43 The Guest Network m enu There are two submenus under th e Guest Network menu (s hown in Figure 4- 43 ) : Wireless Settings and Storage Sharing .
Archer C7 AC1750 Wireless Du al Band Gigabit Router - 60 - Allow Guest T o Access M y Local Network - If enabled, gues ts can communicate with hosts. Enable Guest Ne twork Bandw idth Control - If enabled, the Gues t Network Bandwidth Control rules wil l take effect.
Archer C7 AC1750 Wireless Du al Band Gigabit Router - 61 - Confirm Passwo rd - Re - enter the password here. Storage Authority - Aut hority of user: Read Onl y or Read and Write. Name - This folder's display name. Pa rtition - The volum e that the folder resides.
Archer C7 AC1750 Wireless Du al Band Gigabit Router - 62 - 4.9 DHCP Figure 4- 47 The DHCP menu There are three subme nus under the DHCP menu (shown in Figure 4- 47 ) : DHCP Settings , DHCP Client s List and Address Rese rvation . Cl ick any of them, and you will be able to configure the c orresponding funct ion s.
Archer C7 AC1750 Wireless Du al Band Gigabit Router - 63 - Add ress Lease Time - The Address Lease Time is the amount of time a network user will be allowed connecti on to the router with their curre nt dynamic IP A ddress. Enter the am ount of time in minut es and t he user w ill be "leased " t his dynamic IP Address.
Archer C7 AC1750 Wireless Du al Band Gigabit Router - 64 - 4.9.3 Address Reservation Choose menu “ DHCP → Address Reservatio n ” , you can view and a dd a reserved addres s for clients via the next screen (shown i n Figure 4- 50 ).
Archer C7 AC1750 Wireless Du al Band Gigabit Router - 65 - 1. Click the Modify in the entry you wa nt to modify . If you want to del ete the entry , click the Delete .
Archer C7 AC1750 Wireless Du al Band Gigabit Router - 66 - S ervice Status - Indicates the Network Sharing service's c urrent status. Y ou ca n c l ick the Start button to s tart the Storage Sharing servi ce and cli ck the Stop butt on to stop it .
Archer C7 AC1750 Wireless Du al Band Gigabit Router - 67 - 2. The new settings wi ll not take effec t until you restart the service. 3. To unplug the USB dri ve, click Eject Disk but ton first. Sim ply pulling USB drive out of the USB port can cause dam age to the device and los s of data.
Archer C7 AC1750 Wireless Du al Band Gigabit Router - 68 - 3. S pecify a port for t he FTP server to use ( The default port number is 21). 4. The Internet Address displa ys the WAN IP address of this router, s o that other us ers can access FTP via this addres s.
Archer C7 AC1750 Wireless Du al Band Gigabit Router - 69 - Figure 4- 57 Media S erver Setting S erver Name - The name of t his Media Server. S erver Status - Indic ates the Media S erver ’s current st atus, started or stopped . Y ou can c lick the S tart button to start t he Media Server and c lick the Stop button to stop it .
Archer C7 AC1750 Wireless Du al Band Gigabit Router - 70 - Figure 4- 59 Media S erver Setting 3. Click the Add share folder button to s pecify a folder as the s earch path of media s erver. T he screen will then appear as shown in Figure 4- 60 . Figure 4- 60 Add New Fol der Display Name - You can enter a display name f or the share f older.
Archer C7 AC1750 Wireless Du al Band Gigabit Router - 71 - Back - C lick th is button t o discard the sett ings and just go to the m edia server configurat ion page.
Archer C7 AC1750 Wireless Du al Band Gigabit Router - 72 - Figure 4- 62 User Ac count Management Only Adminis trator can use a Web browser to tra nsfer the fil es from a PC to the Writable shared volume on the USB dri ve. T o add a new user account, please fol low the steps belo w : 1.
Archer C7 AC1750 Wireless Du al Band Gigabit Router - 73 - User Nam e - Type the us er name that you want to give access to the USB drive. The user name must be compos ed of alphanumeric symbols not exceedin g 15 characters in l ength. P assword - Ent er the password i n the Password f ield.
Archer C7 AC1750 Wireless Du al Band Gigabit Router - 74 - Di sabl e NAT Control - If disabled, neither NAT f unction nor Forwarding conf iguration will take effect. E nable Hardw are NAT Control - If enabled, t he Hardware NAT f eature will take ef fect.
Archer C7 AC1750 Wireless Du al Band Gigabit Router - 75 - I nternal Port - The I nternal Service Port number of the PC running the s ervice applicat ion. Y ou can leave it blank if the Internal Port is the same as the Service Port , or enter a specific port number w hen Service Port is a single one.
Archer C7 AC1750 Wireless Du al Band Gigabit Router - 76 - To modify or delete an exi sting entry: 1. Find the desired entr y in the table. 2. Click Modify or Delete as desired on t he Modify column. Click the Enable / Disable All button to mak e all entries enab led / dis abled .
Archer C7 AC1750 Wireless Du al Band Gigabit Router - 77 - 4. Select the protocol us ed for Incoming Ports from the Incoming Protocol drop - down list, either TCP or UDP , or All. 5. Select E nable d in Status field . 6. Click the Save button to save the ne w rule.
Archer C7 AC1750 Wireless Du al Band Gigabit Router - 78 - Clic k the Enable All button t o make all entries enabled . Click the Disable All button to make all ent ries disabled. Click the Delete All butt on to delete all entries Once the router i s configured, the operation is as follow s: 1.
Archer C7 AC1750 Wireless Du al Band Gigabit Router - 79 - 3. Click the Save button. 4.12.4 UPnP Choose menu “ Forwarding → UPnP ” , and then yo u can view the information about UPnP in the screen (shown in Figure 4- 71).
Archer C7 AC1750 Wireless Du al Band Gigabit Router - 80 - 4.13 Security Figure 4- 72 The Security menu There are four submenu s under the Securit y menu as shown in Fi gure 4- 72 : Basic Securi ty , Advanced Securit y , Loc al Management and Remote Management .
Archer C7 AC1750 Wireless Du al Band Gigabit Router - 81 - VPN - VPN Pas sthrough must be e nabled if you want to allow VPN t unnels using VPN protocols to pass through the router . PPTP Passthrough - Poi nt - to - Point Tunneling Prot ocol (PPTP ) allows the Point - to - Point P rotocol (PPP) to be tunneled thr ough an IP network.
Archer C7 AC1750 Wireless Du al Band Gigabit Router - 82 - Figure 4- 74 Advanced Security Packets Statisti cs Interval (5~60) - The default value is 10. Select a value between 5 and 60 seconds from the drop - dow n list. The Pack ets S tatistic s I nterval value indi cates the tim e section of the packets statistic s .
Archer C7 AC1750 Wireless Du al Band Gigabit Router - 83 - E nable TCP - SYN - FLOOD Attack Fi ltering - Enable or Dis able the TCP - SYN - FLOOD Attack Filteri ng. TCP - SYN - FLOOD Packets T hreshol d (5~3600) - The default value is 50. Ent er a value between 5 ~ 3600.
Archer C7 AC1750 Wireless Du al Band Gigabit Router - 84 - use the password to browse t he built - in web pages t o perform Administrator tas ks while all the others will be bloc ked. After click th e Add button, your PC's M AC Address will be placed in the l ist above.
Archer C7 AC1750 Wireless Du al Band Gigabit Router - 85 - 4.14 Parent al Control C hoose menu “ Parental Control ” , and then you can c onfigure the parental control in the sc reen as shown in Fi gure 4- 77 .
Archer C7 AC1750 Wireless Du al Band Gigabit Router - 86 - Parental Control - Check Enable if you want thi s function to tak e effect ; otherwise , check Disable . MAC Addre ss of Parental P C - In this field, enter the MAC address of the controlling PC, or you can make us e of the Copy To Above button below.
Archer C7 AC1750 Wireless Du al Band Gigabit Router - 87 - 1. Click “ Parental Control ” menu on the left to enter the Parental Control S ettings page. Check Enable and enter the M AC address 00 - 11 - 22 - 33 - 44 - BB in the MAC Address of Parental PC field.
Archer C7 AC1750 Wireless Du al Band Gigabit Router - 88 - 4.15.1 R ule C hoose menu “ Ac cess Control → Rule ” , and then you can view and set Access Control rules i n the screen as s hown in Figure 4- 81 .
Archer C7 AC1750 Wireless Du al Band Gigabit Router - 89 - Move - You can change t he entry’s order as des ired. Enter in t he first box the ID num ber of the entry you want t o move and in the sec ond box another ID numbe r, and then clic k the Move button to change the entri es’ order.
Archer C7 AC1750 Wireless Du al Band Gigabit Router - 90 - Figure 4- 83 Quick Setup – Create an Access T arget E ntry Targ et Description - In this f ield, create a descri ption for the target. Note that thi s description should be u nique (e.g.
Archer C7 AC1750 Wireless Du al Band Gigabit Router - 91 - Fi gure 4- 84 Quick S etup – Create an A dvanced Schedule E ntry Sch edule Description - In this field, create a desc ription for the schedul e. Note that this description should be u nique (e.
Archer C7 AC1750 Wireless Du al Band Gigabit Router - 92 - Rul e - In this field, creat e a name for the rule. Note that this name shoul d be unique (e.g. Rule_1) . Host - In t his field, selec t a host from the drop - do wn list for the rule.
Archer C7 AC1750 Wireless Du al Band Gigabit Router - 93 - For exam ple : If you des ire to allow the host with MAC address 00 - 11 - 22 - 33 - 44 - AA to access www .g oogle.com only f rom 18:00 to 20:00 on Saturday and Sunday , and for bid other hosts in the LAN to access the I nternet, you should fol low the settings below: 1.
Archer C7 AC1750 Wireless Du al Band Gigabit Router - 94 - Figure 4- 87 Host S ettings Host Descrip tion - Here displays the description of the host and this des cription is unique . Information - Here displays the i nformation about t he host.
Archer C7 AC1750 Wireless Du al Band Gigabit Router - 95 - Figure 4- 89 Add or Modify a Host Entry For example : If you des ire to restrict the internet ac tivities of host with MA C address 00 - 11 - 22 - 33 - 44 - AA, you should f irst follow the s ettings below: 1.
Archer C7 AC1750 Wireless Du al Band Gigabit Router - 96 - Modify - To modify or delete an exist ing entry. T o add a new entry , pl ease follow the steps below. 1. C lick the Add New … button. 2. In Mode fiel d, select IP Address or D omain Name .
Archer C7 AC1750 Wireless Du al Band Gigabit Router - 97 - 1) In Target Descri ption field, c reate a unique descri ption for the target (e. g. Target_1). 2) I n Domain Name field, enter t he domain name, eit her the full nam e or the keywords (for example , go ogle) in the blank .
Archer C7 AC1750 Wireless Du al Band Gigabit Router - 98 - Schedule Descriptio n - Here displa ys the desc ription of the schedul e and this des cription is unique . Da y - Here dis plays the day(s) in a we ek. Time - Here displays the time period i n a day.
Archer C7 AC1750 Wireless Du al Band Gigabit Router - 99 - 1. Click Add New ... button shown i n Figure 4- 93 to enter t he Advanced Schedul e Settings page. 2. In Schedule Descripti on fiel d, create a unique descr iption f or the schedule ( e.g. Schedule_1 ) .
Archer C7 AC1750 Wireless Du al Band Gigabit Router - 100 - T o add static routing entries: 1. Click Add Ne w … s hown in Figure 4- 96 , you will see the f ollowing screen.
Archer C7 AC1750 Wireless Du al Band Gigabit Router - 101 - Figure 4- 98 System Routing T able Desti nation Netw ork - The Destinat ion Network is the addres s of the network or host t o which the static route is assigned.
Archer C7 AC1750 Wireless Du al Band Gigabit Router - 102 - Figure 4- 100 B andwidth Control Settings E nable Bandw i dth Contro l - Check this box so that the Bandwidth Control settings can t ake effect. Line Type - Select the right type for you network connection.
Archer C7 AC1750 Wireless Du al Band Gigabit Router - 103 - T o add /modify a Bandwidth Control rule, follow the steps below . 1. Click Add Ne w … s hown in Figure 4- 101 , you will see a new screen shown i n Figure 4- 102 . 2. Enter the informat ion like the sc reen shown below .
Archer C7 AC1750 Wireless Du al Band Gigabit Router - 104 - MAC Address - The MA C address of the cont rolled computer in t he LAN. IP Address - The ass igned IP address of t he controlled computer in t he LAN. Bind - Check this option to enable ARP bi nding for a speci fic device .
Archer C7 AC1750 Wireless Du al Band Gigabit Router - 105 - Figure 4- 106 Fi nd IP & MAC Binding Entry Click the Enable All button to mak e all entries enabled.
Archer C7 AC1750 Wireless Du al Band Gigabit Router - 106 - 4.19 Dynamic DNS Choose menu “ D ynamic DNS ” , and you can conf igure the D ynami c DNS function.
Archer C7 AC1750 Wireless Du al Band Gigabit Router - 107 - Connection Status - T he status of t he DDNS service connecti on is displayed here. Click Logout to log out of the DDNS service.
Archer C7 AC1750 Wireless Du al Band Gigabit Router - 108 - 4.19.3 No - ip.com DDNS If the dynamic DNS Service Provi der you select is www. no - ip.com , the page will appear as shown in Figure 4- 11 0 . Figure 4- 11 0 No - ip.com DDNS Settings To set up for DDNS, fol low these instruct ions: 1.
Archer C7 AC1750 Wireless Du al Band Gigabit Router - 109 - There are two submenus under the IPv6 Suppo rt menu (shown in Figure 4- 111 ): I Pv6 St atus and IPv6 Setup . Click either of them, and you will be able to scan or conf igure the correspondi ng function.
Archer C7 AC1750 Wireless Du al Band Gigabit Router - 11 0 - 4.20.2 IPv6 Setup Figure 4- 11 3 Enable/Dis able IPv6 Enable IPv6 - T ick the checkbox to enable the IPv6 func tion. It ’ s enabled by default. W AN Conne ction T yp e - Choos e the correct WAN connection type based on your ISP ne twork topology .
Archer C7 AC1750 Wireless Du al Band Gigabit Router - 111 - 1) DHCPv6 Figure 4- 11 4 DHCPv6 Get non - te mporar y IPv6 address - Get a non - temporary IP v6 address from the I SP.
Archer C7 AC1750 Wireless Du al Band Gigabit Router - 11 2 - Note: If you get Addres s not found error when you acc ess a Web site, it is likely t hat your DNS servers are set up improperl y. You should contac t your ISP to get DNS server ad dresses.
Archer C7 AC1750 Wireless Du al Band Gigabit Router - 11 3 - IPv6 Addres s - Enter the IPv6 addres s in dotted - dec imal notation provi ded by your ISP. Default Gatew ay - Enter the def ault gateway in dot ted - decimal not ation provided by y our ISP.
Archer C7 AC1750 Wireless Du al Band Gigabit Router - 11 4 - User Name/Passw ord - E nter the User Name and P assword provided b y your ISP. Thes e fields are case - s ensitive. Get IPv6 Address Wa y • G et non - temporar y IPv6 address - Get a non - temporar y IPv6 address by DHCPv6 from the ISP.
Archer C7 AC1750 Wireless Du al Band Gigabit Router - 11 5 - Address /Subnet M ask/Default Gat eway - the I Pv4 address/ subnet mask/ default gateway assigned , in dott ed - decimal notation . MTU Size - T he normal MTU (Maximum Trans mission Unit) value f or most Ethernet network s is 1 48 0 Bytes.
Archer C7 AC1750 Wireless Du al Band Gigabit Router - 11 6 - Choose menu “ S ystem T ools ” , and you can s ee the submen us under the main menu: Tim e Settings , Diagnostic , Firmware Upgrade , Factor y Defau l ts , Backup & Restore , Re boot , Password , System Log and St atistics .
Archer C7 AC1750 Wireless Du al Band Gigabit Router - 11 7 - Daylight Saving Status - Displays the status whether the Dayli ght Saving is in us e. To set ti me manuall y: 1. Select your local time zone. 2. Enter the Date in Mont h/Day/Y ear format.
Archer C7 AC1750 Wireless Du al Band Gigabit Router - 11 8 - Figure 4- 121 Diagnos tic T ools Diagnostic T ool - Check the radio button t o select one diagnosti c too. Ping - This diagnosti c tool troubleshoots connect ivity , reachabilit y , and name resolution to a given host or gateway .
Archer C7 AC1750 Wireless Du al Band Gigabit Router - 11 9 - T racerout e Max TTL - Set the maximum number of hops (max TTL to be reached) in the path to search for the target (destinati on). The default is 20. C lick Sta r t t o check the connecti vity of the Internet.
Archer C7 AC1750 Wireless Du al Band Gigabit Router - 120 - T o upgrade the router 's firmw are, follow these instructi ons b elow : 1. Download a most recent firmware upgrade fi le from our websit e ( www .tp - link.c om). 2. Enter or selec t the path name where you save the downloaded fi le on the computer int o the File blank.
Archer C7 AC1750 Wireless Du al Band Gigabit Router - 121 - Note: All changed set tings will be lost when defaults are restored . 4.21.5 Backup & Restore Choose menu “ Sy stem T ools → Bac.
Archer C7 AC1750 Wireless Du al Band Gigabit Router - 122 - Some settings of the router will tak e effect only after rebooting, which incl ude • C ha n ge the LAN IP Addres s (system will reboot a utomaticall y). • C han ge the DHCP Settings . • C han ge the Wireless c onfigurations.
Archer C7 AC1750 Wireless Du al Band Gigabit Router - 123 - Figure 4- 128 S ystem Log Auto Mail Feature - I ndicates whet her auto mail feature i s enabled or not.
Archer C7 AC1750 Wireless Du al Band Gigabit Router - 124 - Note: O nly when you selec t Authentication , do you have to enter th e User Name and Pass word in the following fi elds. • User Name - Your mail account name filled in the From fiel d.
Archer C7 AC1750 Wireless Du al Band Gigabit Router - 125 - Figure 4- 130 S tatistic s Cur rent Statistics Statu s - Enabl e or Disable. The default value is disabled. To enable it , click the Ena ble button. I f it is disabled, the func tion of DoS protecti on in Security setti ngs will be disabled.
Archer C7 AC1750 Wireless Du al Band Gigabit Router - 126 - Statistics Tabl e: IP /MAC Address The I P and MAC a ddres s are displ ayed with related statistics . Total Packets The total number of packets received and tra nsmitted by the router . Byt es The total number of bytes received and trans mitted by the rout er .
Archer C7 AC1750 Wireless Du al Band Gigabit Router - 127 - Appendix A: F AQ 1. How do I configure the r outer to access In ternet by ADSL users? 1) First, confi gure the ADS L Modem configured in RFC148 3 bridge model. 2) Connect the Et hernet cable from your A DSL Modem to the Int ernet port on the router .
Archer C7 AC1750 Wireless Du al Band Gigabit Router - 128 - 2. How do I configure the r outer to access In ternet by Ethernet user s? 1) Login to the router , click the “Network” menu on the left of your browser , and click "W AN" submenu.
Archer C7 AC1750 Wireless Du al Band Gigabit Router - 129 - Figure A - 5 Add or Modify a Virtual server Entry Note: Your opposite s ide should call your WA N IP, which is displ ayed on the “Status ” page.
Archer C7 AC1750 Wireless Du al Band Gigabit Router - 130 - Figure A -7 Basi c Security 4. I want to build a WEB S erver on the LAN, w hat should I do? 1) Because the WEB S erver port 80 will interfere wi th the WEB management port 80 on the router , you must change the WEB management port number to avoid interfe rence.
Archer C7 AC1750 Wireless Du al Band Gigabit Router - 131 - field of the Web browser. If the LAN IP of the modem connected wi th your router is 192.168. 0 .x , the default LAN IP of the router wi ll automatically s witch from 192.168. 0 .1 t o 192.168.
Archer C7 AC1750 Wireless Du al Band Gigabit Router - 132 - Appendix B: Configuring t he PCs In this section, we ’ l l introduce how to install and configure the TCP/ IP correctly in Windows XP . First make sure your E thernet A dapter is working, refer to the adapter ’ s manual if needed.
Archer C7 AC1750 Wireless Du al Band Gigabit Router - 133 - 5) The followin g TC P/IP Propertie s win dow will display and t he IP Address tab is open on this window b y default .
Archer C7 AC1750 Wireless Du al Band Gigabit Router - 134 - Appendix C: S pecif ications General St a n dards IEEE 802.1 1 ac, IEEE 802.1 1n , IEEE 802.1 1g , IEEE 802.1 1b , IEEE 802.1 1a , IEEE 802.1 1e , IEEE 802.1 1i , IE EE 802.1X , IEEE 802.3X , IEEE 802.
Archer C7 AC1750 Wireless Du al Band Gigabit Router - 135 - Appendix D: Glossary 802. 11ac - IEE E 802.11ac is a wireless c omputer networking st andard of 802.11.This specific ation will enable mul ti - station WLA N throughput of at least 1 gigabit pe r second .
Archer C7 AC1750 Wireless Du al Band Gigabit Router - 136 - MTU ( Maximu m Transmission Unit ) - The siz e in bytes of the larges t packet that can be transmitted. NAT ( N etwork A ddress T ranslation) - NA T technology trans lates IP address es of a local area network to a diff erent IP address for the I nternet.
Un punto importante, dopo l’acquisto del dispositivo (o anche prima di acquisto) è quello di leggere il manuale. Dobbiamo farlo per diversi motivi semplici:
Se non hai ancora comprato il TP-Link Archer C7 è un buon momento per familiarizzare con i dati di base del prodotto. Prime consultare le pagine iniziali del manuale d’uso, che si trova al di sopra. Dovresti trovare lì i dati tecnici più importanti del TP-Link Archer C7 - in questo modo è possibile verificare se l’apparecchio soddisfa le tue esigenze. Esplorando le pagine segenti del manuali d’uso TP-Link Archer C7 imparerai tutte le caratteristiche del prodotto e le informazioni sul suo funzionamento. Le informazioni sul TP-Link Archer C7 ti aiuteranno sicuramente a prendere una decisione relativa all’acquisto.
In una situazione in cui hai già il TP-Link Archer C7, ma non hai ancora letto il manuale d’uso, dovresti farlo per le ragioni sopra descritte. Saprai quindi se hai correttamente usato le funzioni disponibili, e se hai commesso errori che possono ridurre la durata di vita del TP-Link Archer C7.
Tuttavia, uno dei ruoli più importanti per l’utente svolti dal manuale d’uso è quello di aiutare a risolvere i problemi con il TP-Link Archer C7. Quasi sempre, ci troverai Troubleshooting, cioè i guasti più frequenti e malfunzionamenti del dispositivo TP-Link Archer C7 insieme con le istruzioni su come risolverli. Anche se non si riesci a risolvere il problema, il manuale d’uso ti mostrerà il percorso di ulteriori procedimenti – il contatto con il centro servizio clienti o il servizio più vicino.
