Manuale d’uso / di manutenzione del prodotto 4.1.1 1910011002 del fabbricante TP-Link
Vai alla pagina of 116
TL-WR841N TL-WR841ND 300Mbps Wireless N Router REV 4.1.1 191001 1002.
COPYRIGHT & TRADEMARKS S pecifications ar e subject to change without notice. is a registered trademark of TP-LINK TECHNOLOGIES CO., L TD. Other br ands and product names are trademarks or registered trademarks of t heir respective holders.
FCC ST A TEMENT This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limit s are designed to provide r easonable protection against harmful interference in a residential installation.
separation distance of at least 20 cm from all persons and must not be co -located or operating in conjunction with any other antenna or transmitter .” CE Mark W arning This is a class B product. In a domestic environment , this product may cause radio interference, in which case the user may be required to take adequate measures.
Korea W arning St atemen t s 당해 무선설비는 운용중 전파혼신 가능성이 있음. NCC Notice & BSMI Notice 注意！ 依據 低功率電波輻射性電機管理辦法 第十二條 .
Safety Information z When product has power button, the power button is one of the wa y to shut off the product; when there is no power b utton, the only way to co mpletely shut off power is to disconnect the product or the power adapter from the power source.
TP-LINK TECHNOLOGIES CO., L TD TP-LINK TECHNOLOGIES CO., L TD. Building 24 (floors 1, 3, 4, 5), and 28 (floors 1-4) Central Science and T echnology Park, Shennan Rd, Nanshan, Shenzhen, China DECLARA TION OF CONFORMITY For the following equipment: Product Description: 300Mbp s Wireless N Router Model No.
- I - CONTENTS Package C ontent s..................................................................................................... 1 Chapter 1. Introduc tion .........................................................................................
- II - 4.7.2 DHCP Client List ........................................................................................... 47 4.7.3 Address Rese rv ation .................................................................................... 47 4.8 Forwar ding .
- III - 4.16.5 Backup & Re store ......................................................................................... 88 4.16.6 Rebo ot ..........................................................................................................
TL-WR841N/TL-WR841ND 300Mbps Wireless N Router User G uide - 1 - Package Contents The following items should be found in your package: ¾ TL-WR841N/TL-WR841ND 300Mbps Wireless N Router ¾ Power Adapte.
TL-WR841N/TL-WR841ND 300Mbps Wireless N Router User G uide - 2 - Chapter 1. Introduction Thank you for choosing the TL-WR841N/ TL-WR8 41ND 300Mbps Wireless N Router. 1.1 Overview of the Router Th e TL-WR841N/TL-WR8 41ND 300Mbps Wireless N Router i nt egr at es 4-port Switch, F ire wa ll , NA T -Router and Wireless AP .
TL-WR841N/TL-WR841ND 300Mbps Wireless N Router User G uide - 3 - 1.2 Conventions The Rout er or TL-WR 841N/TL-W R841ND mentio ned in this guide stands for T L- WR 84 1N/ TL -W R84 1ND 300Mbps Wireless N Router without any explanation. ) Note: The two devices of TL-WR841N and TL-WR841ND are s haring this User Guide.
TL-WR841N/TL-WR841ND 300Mbps Wireless N Router User G uide - 4 - 1.4 Panel Layout 1.4.1 The Front Panel Figure 1-1 Front Panel sketch The Router ’s LEDs are located on the front panel (View from lef t to right). Name Statu s Indication Off Power is off.
TL-WR841N/TL-WR841ND 300Mbps Wireless N Router User G uide - 5 - 1.4.2 The Rear Panel Figure 1-2 Rear Panel sketch The following parts are lo cated on the rear panel (View from left to right). ¾ ON/OFF: The switch for the power . ¾ POWER: The Power socket is where you will c onnect the power adapt er .
TL-WR841N/TL-WR841ND 300Mbps Wireless N Router User G uide - 6 - 2) Use the WPS/RESET button: With the Router powered on, press and hold the WPS/RESET button (more than 5 seconds) until th e SYS LED becomes quick-flash from slow-flash. Then release the button and wait t he Router to reboot to its factory default settings.
TL-WR841N/TL-WR841ND 300Mbps Wireless N Router User G uide - 7 - Chapter 2. Connecting the Router 2.1 System Requirement s ¾ Broadband Internet Access Service (DSL/Cable/Ethernet) ¾ One DSL/Cable Modem that has an RJ45 connector (which is not necessary if the Router is connected directly to the Ethernet.
TL-WR841N/TL-WR841ND 300Mbps Wireless N Router User G uide - 8 - 6. Connect the power adapter to the power socket on the Router , and th e other end into an electrical outlet. The Router w ill start to work automatically . 7. Power on your PC and Cable/DSL Modem.
TL-WR841N/TL-WR841ND 300Mbps Wireless N Router User G uide - 9 - Figure 2-2 W all-mount Install Note: The diameter of the screw , 4mm<D<8mm, and the distance of two screws is 123mm. The screw that project from the wall need around 4 mm based, and the length of the screw need to be at least 20mm to withstand the weight of the product.
TL-WR841N/TL-WR841ND 300Mbps Wireless N Router User G uide - 10 - Chapter 3. Quick Installation Guide This chapter will show you how to configure the basic functions of your TL-WR841ND 300Mbps Wireless N Router using Quick Setup Wiz ar d within minutes.
TL-WR841N/TL-WR841ND 300Mbps Wireless N Router User G uide - 1 1 - Figure 3-2 Failure result of Ping command Please check the connection following these step s: 1. Is the connection bet ween your PC and the Router correct? ) Note: The 1/2/3/4 LEDs of LA N ports which you link to on the Router and LEDs on your PC' s adapter should be lit.
TL-WR841N/TL-WR841ND 300Mbps Wireless N Router User G uide - 12 - After a moment, a login window will appear , similar to the Figure 3-4. Enter admin for the User Name and Password, both in lo wer case letters. Then click the OK button or press the Enter key .
TL-WR841N/TL-WR841ND 300Mbps Wireless N Router User G uide - 13 - Figure 3-6 WAN Connection Type The Router provides Auto-Detect fu nction and supports five popular ways Dynamic IP , Static IP , PPPoE/Russia PPPoE , L2TP/Russia L2TP and PPTP/Russia PPTP to connect to the Internet.
TL-WR841N/TL-WR841ND 300Mbps Wireless N Router User G uide - 14 - Figure 3-7 Quick Setup – MAC Clone 2) If the connection type detected is PPPoE/Russia PPPoE , the next screen will appear as shown in Figure 3-8. Figure 3-8 Quick Setup - PPPoE ¾ User Name / Password - Enter the User Name and Passw ord provided by your ISP.
TL-WR841N/TL-WR841ND 300Mbps Wireless N Router User G uide - 15 - ¾ Secondary Connection - It's available only for PPPoE C onnection. If your ISP provides an extra Connection type such as Dynamic/Stat ic IP to connect to a local area network, then you can check the radio button of Dynamic/Static IP to activate this secondary connection.
TL-WR841N/TL-WR841ND 300Mbps Wireless N Router User G uide - 16 - Figure 3-10 Quick Setup - L2TP/Russian L2TP Figure 3-1 1 Quick Setup - PPTP/Russian PPTP ¾ User Name / Password - Enter the User Name and Passw ord provided by your ISP. These fields are case sensitive.
TL-WR841N/TL-WR841ND 300Mbps Wireless N Router User G uide - 17 - 4. Click Next to continue, the Wireless setti ngs p age will appear as shown in Figure 3-12. Figure 3-12 Quick Setup – Wireless ¾ Wireless Radio - The wireless radio can only be enabl ed/disabled by using the WIFI ON/OFF switch on the device.
TL-WR841N/TL-WR841ND 300Mbps Wireless N Router User G uide - 18 - ¾ WPA-PSK/WPA2-PSK - Select WPA based on pre-shared passphrase. z PSK Password - You can enter ASCII or Hexadecimal characters. For ASCII , the key can be made up of any numbers 0 to 9 and any letters A to Z, the length should be between 8 and 63 characters.
TL-WR841N/TL-WR841ND 300Mbps Wireless N Router User G uide - 19 - Chapter 4. Configuring the Router This chapter will show each Web p age's ke y functions and the c onfiguration way . 4.1 Login After your successful login, you will se e the fift een main menus on the left of the W eb-based utility .
TL-WR841N/TL-WR841ND 300Mbps Wireless N Router User G uide - 20 - Figure 4-1 Router S tatus 4.3 Quick Setup Please refer to 3.2 Quick Installation Guide . 4.4 WPS This section will guide you to add a new wire less device to an existing network quickly by WPS (Wi-Fi Protected Setup) function.
TL-WR841N/TL-WR841ND 300Mbps Wireless N Router User G uide - 21 - Figure 4-2 WPS ¾ WPS St atus - Enable or di sable the WPS function here. ¾ Current PIN - The current value of the R outer's PIN is displayed her e. The default PIN of the Router can be found in the l abel attached on the router .
TL-WR841N/TL-WR841ND 300Mbps Wireless N Router User G uide - 22 - Figure 4-3 Add A New Device Step 2: Press and hold the WPS button of the client device directly . Step 3: The Wi-Fi Protected Setup LED flashes for two minutes duri ng the Wi-Fi Protected Setup process.
TL-WR841N/TL-WR841ND 300Mbps Wireless N Router User G uide - 23 - ) Note: 1) The WPS LED on the Router will l ight green for five minutes if the device has been successfully added to the network. 2) The WPS function cannot be conf igured if the Wireless Function of the Router is disabled.
TL-WR841N/TL-WR841ND 300Mbps Wireless N Router User G uide - 24 - Figure 4-6 W AN – Dynamic IP This page displays the W AN IP parameters assigned dynamically by your ISP , including IP address, Subnet Mask, Default Gateway , etc. Click the Renew button to renew t he IP parameters from your ISP .
TL-WR841N/TL-WR841ND 300Mbps Wireless N Router User G uide - 25 - Click the Save button to save your settings. 2. If your ISP provides a static or fixed IP Address, Subnet Mask, Gateway and DNS setting, select Static IP . The Static IP settings page will appear, shown in Figure 4-7.
TL-WR841N/TL-WR841ND 300Mbps Wireless N Router User G uide - 26 - 3. If your ISP provides a PPPoE connection, select PPPo E/Russia PPPoE option. Then should enter the following parameters ( Figure 4-8): Figure 4-8 W AN - PPPoE ¾ User Name/Password - Enter the User Name and Password provided by your ISP .
TL-WR841N/TL-WR841ND 300Mbps Wireless N Router User G uide - 27 - ¾ Connect Automatically - The connection can be re-estab lished automatically when it was down. ¾ Time-based Connecting - The connection will only be est ablished in the period from the start time to the end time (both are in HH:MM format).
TL-WR841N/TL-WR841ND 300Mbps Wireless N Router User G uide - 28 - not be configured unless you are sure it is necessary for your ISP . In most cases, leaving these fields blank will work.
TL-WR841N/TL-WR841ND 300Mbps Wireless N Router User G uide - 29 - ¾ User Name/Password - Enter the User Name and Password provided by your ISP . These fields are case-sensitive. ¾ Auth Server - Enter the authenticating serv er IP address or host name.
TL-WR841N/TL-WR841ND 300Mbps Wireless N Router User G uide - 30 - Figure 4-1 1 ¾ User Name/Password - Enter the User Name and Password provided by your ISP . These fields are case-sensitive. ¾ Dynamic IP/ S tatic IP - Choose either as you are given by your ISP .
TL-WR841N/TL-WR841ND 300Mbps Wireless N Router User G uide - 31 - ¾ Connect Manually - Y ou can configure the Router to ma ke it connect or disconnect manually .
TL-WR841N/TL-WR841ND 300Mbps Wireless N Router User G uide - 32 - Figure 4-12 PPTP Settings ¾ User Name/Password - Enter the User Name and Password provided by your ISP . These fields are case-sensitive. ¾ Dynamic IP/ S tatic IP - Choose either as you ar e given by your ISP and enter the ISP’ s IP address or the domain name.
TL-WR841N/TL-WR841ND 300Mbps Wireless N Router User G uide - 33 - Otherwise, enter the number of minutes you want to have el apsed before your Internet connection terminates. ¾ Connect Automatically - Connect automatically after the Rout er is disconnected.
TL-WR841N/TL-WR841ND 300Mbps Wireless N Router User G uide - 34 - Figure 4-13 MAC Address Clone Some ISPs require that you re gister the MAC Address of your adapter . Changes are rarely needed here. ¾ WAN MAC Address - This field displays the current MAC address of the WAN port.
TL-WR841N/TL-WR841ND 300Mbps Wireless N Router User G uide - 35 - ¾ Subnet Mask - An address code that determines the size o f the network. Normally us e 255.255.255.0 as the subnet mask. ) Note: 1) If you change the IP Address of LAN, you must use the new IP Address to lo g in the Router.
TL-WR841N/TL-WR841ND 300Mbps Wireless N Router User G uide - 36 - Figure 4-16 Wireless Settings ¾ Wireless Network Name - Enter a value of up to 32 char acter s. The same name of SSID (Service Set Identification) must be assigned to all wireless devices in your network.
TL-WR841N/TL-WR841ND 300Mbps Wireless N Router User G uide - 37 - ¾ Mode - Select the desired mode. T he default setting is 11bgn mixed. 11b only - Select if all of your wireless clients are 802.11b. 11g only - Select if all of your wireless clients are 802.
TL-WR841N/TL-WR841ND 300Mbps Wireless N Router User G uide - 38 - Figure 4-17 ¾ SSID(to be bridged) - The SSID of the AP your Router is going to connect to as a client. You can also use the search func tion to select the SSID to join. ¾ BSSID(to be bridged) - The BSSID of the AP your R outer is going to connect to as a client.
TL-WR841N/TL-WR841ND 300Mbps Wireless N Router User G uide - 39 - Figure 4-18 Wireless Security ¾ Disable Security - If you do not want to use wireless securi ty, check this radio button. But it’s strongly recommended to choose one of t he following modes to enable security.
TL-WR841N/TL-WR841ND 300Mbps Wireless N Router User G uide - 40 - Figure 4-19 • Wireless Password - You can enter ASCII characters bet ween 8 and 63 c haracters or 8 to 64 Hexadecimal characters. • Group Key Up date Peri od - Specify the group key update inte rval in seconds.
TL-WR841N/TL-WR841ND 300Mbps Wireless N Router User G uide - 41 - Figure 4-21 • Typ e - you can choose the type fo r the WEP security on the drop-do wn list. The default setting is Automatic , which can select Shared Key or Open System authentication type automatically based on the wirele ss station's capability and request.
TL-WR841N/TL-WR841ND 300Mbps Wireless N Router User G uide - 42 - Figure 4-22 Wireless MAC Filtering T o filter wireless users by MAC Address, click Ena ble . The default setting is Disabled . ¾ MAC Address - The wireless st ation's MAC address that you want to filter .
TL-WR841N/TL-WR841ND 300Mbps Wireless N Router User G uide - 43 - 2. Modify the information. 3. Click the Save button. Click the Enable All button to make all entries enabled Click the Disable All button to make all entries disabled. Click the Delete All button to delete all entries.
TL-WR841N/TL-WR841ND 300Mbps Wireless N Router User G uide - 44 - Figure 4-24 Wireless Advanced ¾ Transmit Power - Here you can specify the transmit power of Router. You can select High, Middle or Low which you would like. High is the default setting and is recommended.
TL-WR841N/TL-WR841ND 300Mbps Wireless N Router User G uide - 45 - ¾ Enabled AP Isolation - This function can isolate wireless stations on your network from each other. Wireless devices will be able to communi cate with the Router but not with each other.
TL-WR841N/TL-WR841ND 300Mbps Wireless N Router User G uide - 46 - 4.7 DHCP Figure 4-26 The DHCP menu There are three submenus unde r the DH CP menu (shown in Figure 4-26), DH CP Settings , DHCP Client List and Address Reservation. Click any of them, and you will be able to configure the corresponding function.
TL-WR841N/TL-WR841ND 300Mbps Wireless N Router User G uide - 47 - time is up, the user will be automatically assigned a new dynam ic IP address. The range of the time is 1 ~ 2880 minutes. The default value is 120 minutes. ¾ Default Gateway - (Optional.
TL-WR841N/TL-WR841ND 300Mbps Wireless N Router User G uide - 48 - Figure 4-29 Address Reservation ¾ MAC Address - The MAC address of the PC for which you want to reserve an IP address. ¾ Reserved IP Address - The IP address reserved for the PC by the Router.
TL-WR841N/TL-WR841ND 300Mbps Wireless N Router User G uide - 49 - 4.8 Forwarding Figure 4-31 T he Forwarding menu There are four submenus under the Forwar ding menu (shown in Figure 4-31), Virtual Servers , Port T riggering , DMZ and UPnP . Click any of them, and you will be able to configure the corresponding function.
TL-WR841N/TL-WR841ND 300Mbps Wireless N Router User G uide - 50 - To set up a virtual server entry: 1. Click the Add New… button, the next screen will pop-up as shown in Figure 4-33. 2. Select the service port you want to use from the Common Service Port list.
TL-WR841N/TL-WR841ND 300Mbps Wireless N Router User G uide - 51 - 4.8.2 Port Triggering Choose m enu “ Forw arding → Port T riggering ”, you can view and add port triggering in the screen as shown in Fi gure 4-34. Som e applicati ons require m ultiple connec tions, like Inter net games, vi deo con ferencing, In ternet calling and so on .
TL-WR841N/TL-WR841ND 300Mbps Wireless N Router User G uide - 52 - 3. Select the protocol used for Trigger Port from the T rigger Protocol drop-down list, either TCP , UDP , or All . 4. Select the protocol used for Incoming Ports from the Incoming Protocol drop-down list, either TCP or UDP , or All.
TL-WR841N/TL-WR841ND 300Mbps Wireless N Router User G uide - 53 - function disabled and should have a new static IP Address assigned to it because its IP Address may be changed when usi ng the DHCP function. Figure 4-36 DMZ T o assign a computer or server to be a DMZ server: 1.
TL-WR841N/TL-WR841ND 300Mbps Wireless N Router User G uide - 54 - • App Description - The description provided by the application in the UPnP request. • External Port - The external port the Router opens for the application. • Protocol - The type of protocol the Rout er opens for the application.
TL-WR841N/TL-WR841ND 300Mbps Wireless N Router User G uide - 55 - Figure 4-39 Basic Security ¾ Firewall - A firewall protects your network from the outside world.
TL-WR841N/TL-WR841ND 300Mbps Wireless N Router User G uide - 56 - protocols such as FTP , TFTP , H323 etc. z FTP ALG - To allow FTP clients and servers to transfer data across NAT, keep the default Enable . z TFTP ALG - To allow TFTP clients and servers to transfer data across NAT, keep the default Enable .
TL-WR841N/TL-WR841ND 300Mbps Wireless N Router User G uide - 57 - ¾ DoS Protection - Denial of Service protection. C heck the Enable or Disable button to enable or disable the DoS protecti on function. Only when it is enabled, will the flood filters be enabled.
TL-WR841N/TL-WR841ND 300Mbps Wireless N Router User G uide - 58 - Figure 4-41 Local Management By default, the radio button “ All the PCs on the LAN are allowed to access the Router's Web-Based Utility ” is checked.
TL-WR841N/TL-WR841ND 300Mbps Wireless N Router User G uide - 59 - Figure 4-42 Remote M anagement ¾ Web Management Port - Web browser access normally uses the standard HTTP service port 80. This Router's default remote m anagement web port number is 80.
TL-WR841N/TL-WR841ND 300Mbps Wireless N Router User G uide - 60 - Figure 4-43 Parental Control Settings ¾ Parental Control - Check Enable if you w ant this function to take effect, otherwise check Disable .
TL-WR841N/TL-WR841ND 300Mbps Wireless N Router User G uide - 61 - 7. Click the Save button. Click the Enable All button to enable all the rules in the list. Click the Disable All button to disable all the rules in the list. Click the Delete All button to delete all the entries in the table.
TL-WR841N/TL-WR841ND 300Mbps Wireless N Router User G uide - 62 - z Enter 00-11-22-33-44-AA in the MAC Address of Children’s PC field. z Enter “Allow Google” in the Website Description field. z Enter “www.google.com” in the Allowed Website Name field.
TL-WR841N/TL-WR841ND 300Mbps Wireless N Router User G uide - 63 - Figure 4-47 Access Control Rule Management ¾ Enable Internet Access Control - Select the check box to enable the Internet Access Control function, so the Default Filter Policy can take effect.
TL-WR841N/TL-WR841ND 300Mbps Wireless N Router User G uide - 64 - Figure 4-48 Quick Setup – Create a Host Entry ¾ Mode - Here are two options, IP Address and MAC Address . You can select either of them from the drop-down list. ¾ Host Description - In this field, create a unique description for the host (e.
TL-WR841N/TL-WR841ND 300Mbps Wireless N Router User G uide - 65 - ¾ Target Description - In this field, create a descrip tion for the target. Note that this description should be unique (e.
TL-WR841N/TL-WR841ND 300Mbps Wireless N Router User G uide - 66 - ¾ Time - Select "24 hours", or specify the Start Time and Stop Time yourself. ¾ Start Time - Enter the start time in HHMM format (HHMM are 4 numbers). For example 0800 is 8:00.
TL-WR841N/TL-WR841ND 300Mbps Wireless N Router User G uide - 67 - 5. Select a schedule from the Schedule drop-down list or choose “ Click Here To Add New Schedule ”. 6. In the Status field, select Enabled or Disabled to enable or disable your entry.
TL-WR841N/TL-WR841ND 300Mbps Wireless N Router User G uide - 68 - • Click Sav e to co mplete the settings. Then you will go back to the Access Control Rule Management page and see the following list. 4.11.2 Host Choose menu “ Access Control → Host ”, you can view and set a Host list in the screen as shown in Figure 4-53.
TL-WR841N/TL-WR841ND 300Mbps Wireless N Router User G uide - 69 - Figure 4-54 Add or Modify a Host Entry Figure 4-55 Add or Modify a Host Entry For example : If you desire to restrict the inter net activities of host with MAC address 00-11-22-33-44-AA, you should first follow the settings below: 1.
TL-WR841N/TL-WR841ND 300Mbps Wireless N Router User G uide - 70 - Figure 4-56 T arget Settings ¾ Target Description - Here displays the description about the target and this description is unique. ¾ Information - The target can be IP address, port, or domain name.
TL-WR841N/TL-WR841ND 300Mbps Wireless N Router User G uide - 71 - Figure 4-57 Add or Modify an Access T arget Entry Figure 4-58 Add or Modify an Access T arget Entry For example : If you desire to restrict the inter net activities of host with MAC address 00-11-22-33-44-AA in the LAN to access www.
TL-WR841N/TL-WR841ND 300Mbps Wireless N Router User G uide - 72 - 4.11.4 Schedule Choose menu “ Access Control → Schedule ”, you can view and set a Schedule list in the next screen as shown in Figure 4-59. The Schedule lis t is necessary for the Access Control Rule.
TL-WR841N/TL-WR841ND 300Mbps Wireless N Router User G uide - 73 - Figure 4-60 Advanced Schedule Settings For example : If you desire to restrict the inter net activities of host with MAC address 00-11-22-33-44-AA to access www.google.com only from 18:00 to 20:00 on Saturday and Sunday , you should first follow the settings below: 1.
TL-WR841N/TL-WR841ND 300Mbps Wireless N Router User G uide - 74 - 4.12.1 Static Routing Choose menu “Advanced Routing → St atic Routing ”, and you can configure the static route in the next screen, shown in Figure 4-62. A static route is a p re-d etermined path that network information must travel to r each a specific host or network.
TL-WR841N/TL-WR841ND 300Mbps Wireless N Router User G uide - 75 - Click the Disable All button to disable all the entries. Click the Delete All button to delete all the entries. Click the Previous button to view the information in the previous screen, click the Next button to view the information in the next screen.
TL-WR841N/TL-WR841ND 300Mbps Wireless N Router User G uide - 76 - 4.13.1 Control Settings Choose menu “ Bandwidt h Control → Control Settings ”, you can configure the Egress Bandwidth and Ingress Bandwid th in the next screen. Their val ues you c onfigure should be less than 100000Kbps.
TL-WR841N/TL-WR841ND 300Mbps Wireless N Router User G uide - 77 - ¾ Ingress bandwidth - This field displa ys the max and mix download bandwidth through the W AN port, the default is 0. ¾ Enable - This displays th e status of the rule. ¾ Modify - Click Modify to edit the rule.
TL-WR841N/TL-WR841ND 300Mbps Wireless N Router User G uide - 78 - Figure 4-69 Binding Settings ¾ MAC Address - The MAC address of the controll ed computer in the LAN. ¾ IP Address - The assigned IP address of the cont rolled computer in the LAN. ¾ Bind - Check this option to enable ARP binding for a specific device.
TL-WR841N/TL-WR841ND 300Mbps Wireless N Router User G uide - 79 - 2. Click Modify or Delete as desired on the Modify column. To find an existing entry, follo w the steps below. 1. Click the Find button as shown in Figure 4-69. 2. Enter the MAC Address or IP Address.
TL-WR841N/TL-WR841ND 300Mbps Wireless N Router User G uide - 80 - z Delete - Delete the item. Click the Bind All button to bind all the current items, available after enable. Click the Load All button to load all items to the IP & MAC Bind ing list.
TL-WR841N/TL-WR841ND 300Mbps Wireless N Router User G uide - 81 - Figure 4-73 Comexe.cn DDNS Settings To set up for DDNS, follow these instructions: 1. T ype the Do main Name received from your dynamic DNS service provider . 2. T ype the User Name for your DDNS account.
TL-WR841N/TL-WR841ND 300Mbps Wireless N Router User G uide - 82 - Figure 4-74 Dyndns.org DDNS Settings To set up for DDNS, follow these instructions: 1. T ype the User Name for your DDNS account. 2. T ype the Passw ord for your DDNS account. 3. T ype the Do main Name you received from dynamic DNS service provider here.
TL-WR841N/TL-WR841ND 300Mbps Wireless N Router User G uide - 83 - To set up for DDNS, follow these instructions: 1. T ype the User Name for your DDNS account. 2. T ype the Passw ord for your DDNS account. 3. T ype the Do main Name you received from dynamic DNS service provider .
TL-WR841N/TL-WR841ND 300Mbps Wireless N Router User G uide - 84 - Figure 4-77 T ime settings ¾ Time zone - Select your local time zone from this drop-down list. ¾ Date - Enter your local date in MM/ DD/YY into the right blanks. ¾ Tim e - Enter your local time in HH/MM/SS into the right blanks.
TL-WR841N/TL-WR841ND 300Mbps Wireless N Router User G uide - 85 - T o set time automatically: 1. Select your local time zone. 2. Enter the address or domain of the NTP Server I or NTP Server II . 3. Click the Get GMT button to get system time from In ternet if you have connected to the Internet.
TL-WR841N/TL-WR841ND 300Mbps Wireless N Router User G uide - 86 - Figure 4-78 Diagnostic T ools ¾ Diagnostic T ool - Check the radio button to select one diagnostic too. z Ping - This diagnostic tool troubles hoots connectivity , reachab ility , and name resolution to a given host or gateway .
TL-WR841N/TL-WR841ND 300Mbps Wireless N Router User G uide - 87 - If the result is similar to the following screen, the connectivity of t he Internet is fine. Figure 4-79 Diagnostic Results ) Note: Only one user can use this tool at one time. Op tions “Number of Pings”, “Ping Size” and “Ping T imeout” are used for Ping function.
TL-WR841N/TL-WR841ND 300Mbps Wireless N Router User G uide - 88 - There is no need to upgrade the firmware unless the new firmware has a new feature you want to use. However, when experiencing probl ems caused by the Router rather than the configuration, you can tr y to upgrade the firmware.
TL-WR841N/TL-WR841ND 300Mbps Wireless N Router User G uide - 89 - Figure 4-82 Backup & Restore Configuration ¾ Click the Backup button to save all configuration setti ngs as a backup file in your local computer . ¾ T o upgrade the Router's configurat ion, follow these instructions.
TL-WR841N/TL-WR841ND 300Mbps Wireless N Router User G uide - 90 - • Update the configuration with the f ile (system will reboot automatically. 4.16.7 Password Choose menu “ System T ools → Password ”, you can change the factor y de fault user name and password of the Router in the next screen as shown in Figure 4-84.
TL-WR841N/TL-WR841ND 300Mbps Wireless N Router User G uide - 91 - Figure 4-85 System Log ¾ Auto Mail Feature - Indicates whether auto mail feature is enabled or not. ¾ Mail Settings - Set the receiving and sending mailbox address, server ad dress, validation information as well as the timetable for Auto Mail Feature, as shown in Figure 4-86.
TL-WR841N/TL-WR841ND 300Mbps Wireless N Router User G uide - 92 - z From - Your mail box address. The Router would connect it to send logs. z To - Recipient’s address. The destination mail box where the logs would be received. z SMTP Server - Your smtp server.
TL-WR841N/TL-WR841ND 300Mbps Wireless N Router User G uide - 93 - Figure 4-87 S tatistics ¾ Current Statistics Status - Enable or Disable. The default va lue is disabled. To enable, click the Enable button. If disabled, the function of DoS protection in Security settings will disabled.
TL-WR841N/TL-WR841ND 300Mbps Wireless N Router User G uide - 94 - UDP Tx The number of UDP packets transmitt ed to the WAN per second at the specified Packets Statistics interval. It is shown like “current transmitting rate / Max transmitting rate”.
TL-WR841N/TL-WR841ND 300Mbps Wireless N Router User G uide - 95 - Appendix A: FAQ 1. How do I configure the Router to access Internet by ADSL users? 1) First, configure the ADSL Modem configured in RFC1483 bridg e model. 2) Conn ect the Ethernet cable from your AD SL Modem to the W AN port on the Router .
TL-WR841N/TL-WR841ND 300Mbps Wireless N Router User G uide - 96 - " WA N " subm enu. On the WA N pa g e, select “Dynamic IP” for "W AN Connection T ype", finish by clicking Save . 2) Some ISPs require that you register the MAC Address of your adapter , which is connected to your cable/DSL Modem during installation.
TL-WR841N/TL-WR841ND 300Mbps Wireless N Router User G uide - 97 - Figure A-5 Add or Modify a Virtual server Entry ) Note: Your opposite side should call your WAN IP , which is displayed on the “Status” page.
TL-WR841N/TL-WR841ND 300Mbps Wireless N Router User G uide - 98 - Figure A-7 Basic Security 4. I want to build a WEB Server on the LAN, w hat should I do? 1) Because the WEB Server port 80 will inte rfere with the WEB management port 80 on the Router , you must change the WEB management p ort number to avoid interference.
TL-WR841N/TL-WR841ND 300Mbps Wireless N Router User G uide - 99 - “ Service Port ”, and your IP address next to the “ IP Address ”, assuming 192.168.0.188 for an example, remember to Enable and Save . Figure A-9 Virtual Servers Figure A-10 Add or Modify a Virtual server Entry 5.
TL-WR841N/TL-WR841ND 300Mbps Wireless N Router User G uide - 100 - Appendix B: Configuring the PC In this section, we’ll introduce how to inst all and configure the TCP/IP correctly in Windows XP . First make sure your Ethernet Adapter is work ing, refer to the adapter ’s manual if necessary .
TL-WR841N/TL-WR841ND 300Mbps Wireless N Router User G uide - 101 - Figure B-2 5) The following TCP/IP Properties window will display and the IP Address tab is open on this window by default.
TL-WR841N/TL-WR841ND 300Mbps Wireless N Router User G uide - 102 - Figure B-3 ) Note: For Windows 98 OS or before, the PC and Router may need to be restarted. ¾ Setting IP address manually 1 Select Use the following IP address radio button. And the fo llowing items available 2 If the Router's LAN IP addr ess is 192.
TL-WR841N/TL-WR841ND 300Mbps Wireless N Router User G uide - 103 - Now click OK to keep your settings..
TL-WR841N/TL-WR841ND 300Mbps Wireless N Router User G uide - 104 - Appendix C: Specifications General S tandards IEEE 802.3, IEEE 802.3u, IEEE 802.1 1b, IEEE 802.
TL-WR841N/TL-WR841ND 300Mbps Wireless N Router User G uide - 105 - Appendix D: Glossary ¾ 802.11n - 802.11n builds upon previous 802.11 standards by adding MIMO (multiple-input multiple-output).
TL-WR841N/TL-WR841ND 300Mbps Wireless N Router User G uide - 106 - hosts to the Internet over an always-on connection by simulating a dial-up connection. ¾ SSID - A S ervice S et Id entification is a thirty-two char acter (maximum) alphan umeric key identifying a wireless local area network.
Un punto importante, dopo l’acquisto del dispositivo (o anche prima di acquisto) è quello di leggere il manuale. Dobbiamo farlo per diversi motivi semplici:
Se non hai ancora comprato il TP-Link 4.1.1 1910011002 è un buon momento per familiarizzare con i dati di base del prodotto. Prime consultare le pagine iniziali del manuale d’uso, che si trova al di sopra. Dovresti trovare lì i dati tecnici più importanti del TP-Link 4.1.1 1910011002 - in questo modo è possibile verificare se l’apparecchio soddisfa le tue esigenze. Esplorando le pagine segenti del manuali d’uso TP-Link 4.1.1 1910011002 imparerai tutte le caratteristiche del prodotto e le informazioni sul suo funzionamento. Le informazioni sul TP-Link 4.1.1 1910011002 ti aiuteranno sicuramente a prendere una decisione relativa all’acquisto.
In una situazione in cui hai già il TP-Link 4.1.1 1910011002, ma non hai ancora letto il manuale d’uso, dovresti farlo per le ragioni sopra descritte. Saprai quindi se hai correttamente usato le funzioni disponibili, e se hai commesso errori che possono ridurre la durata di vita del TP-Link 4.1.1 1910011002.
Tuttavia, uno dei ruoli più importanti per l’utente svolti dal manuale d’uso è quello di aiutare a risolvere i problemi con il TP-Link 4.1.1 1910011002. Quasi sempre, ci troverai Troubleshooting, cioè i guasti più frequenti e malfunzionamenti del dispositivo TP-Link 4.1.1 1910011002 insieme con le istruzioni su come risolverli. Anche se non si riesci a risolvere il problema, il manuale d’uso ti mostrerà il percorso di ulteriori procedimenti – il contatto con il centro servizio clienti o il servizio più vicino.
