Manuale d’uso / di manutenzione del prodotto Strata CIX IP5000-UG-VC del fabbricante Toshiba
Vai alla pagina of 208
T elecommunication Systems Division July 2010 IP5000-Series T elephone User Guide ®.
Publication Information T oshiba America Information Systems, Inc., T elecommunication Systems Division, re serves the right, without prior notice, to revise this information publication for any reason, including, but no t limited to, utilization of new advances in the state of technica l arts or to simply change the design of this document.
TOSHIBA AMERICA INFORMA TION SYSTEMS, INC. ( “ T AIS ” ) T elecommunication Systems Division License Agr eement IMPORT ANT : THIS LICENSE AGREEMENT (“AGREEMENT”) IS A LEGAL AGREEMENT BETWEEN YOU (“YOU”) AND T AIS. CAREFULL Y READ THIS LICENSE AGREEMENT .
T oshiba America Infor mation Systems, Inc. T elecommunication Systems Division End-User Limited W arranty T oshiba America Information Systems, Inc., (“T AIS”) warrants that this telephone equipm.
W ARRANTIES FOR NON-TOSHIBA BRANDED THIRD P ARTY PRODUCTS A valuable element of T oshiba’ s product strategy is to of fer our custo mers a complete product portfolio .
This page is i ntentionally l eft blank..
S trata CIX IP5000-series T elephone UG 07/09 i Contents Introductio n Organization ....................................... ...................... ....................... .................. ..................ix How to Use This Guide...................
Contents Chapter 3 – SoftIPT ii S trata CIX IP5000- series T elephone UG 07/09 Telephone Terminology ..................... .... ..... ......... ...................... ....................... .................20 Making a Call ........................
Contents Chapter 4 – Featur e Operations S trata CIX IP5000-series T elephone UG 07/09 iii Chapter 4 – Feature Operations Account Code Calls ......... ...................... ....................... ...................... ....................... ..
Contents Chapter 4 – Featur e Operations iv S trata CIX IP5000- series T elephone UG 07/09 Echo Cancellation ......................... ....................... ...................... ....................... ................. 68 Emergency Call .......
Contents Chapter 5 – IP5122-SDC S trata CIX IP5000-series T elephone UG 07/09 v Chapter 5 – IP5122-SDC Making and Answering Calls...................... ...................... ....................... ...................... .... 90 Local Emergency Service (Calling 911) .
Contents Chapter 7 – Headset and Handset Operation vi S trata CIX IP5000- series T elephone UG 07/09 Chapter 7 – Headset and Handset Operation Recommended Headsets ................................. ....................... ...................... ..
Contents Appendix A – Refer ences S trata CIX IP5000-series T elephone UG 07/09 vii Advanced Network Settings ...................................... ...................... ....................... ......145 Sound Settings ............................
This page is intentionally left blank..
S trata CIX IP5000-series T elephone UG 07/09 ix Intr oduction This user guide describes how to use the Toshiba IP5000-series telephones with the Strata CIX670, CIX200, CIX100, CIX100-S , and CIX40 telephon e systems. These include: • Strata IP5000-series digital tele phones shown in T able 1 on Page 2 .
Introdu ction How to Use This Guide x S trata CIX IP5000- series T elephone UG 07/09 • Chapter 9 – Administrator Programming explains features and functions to be performed by an Administrator . • Appendix A – Refer ences includes tables that support procedures in the Basic and Feature Operation chapters.
Introdu ction How to Use This Guide S trata CIX IP5000-series T elephone UG 07/09 xi Conventions Description [DN] Represents any Directory Numb er button, also known as an extension or intercom number . T elephones can have multiple extensions. Incoming calls ring extensions bottom to top.
Introdu ction Related Documents/Media xii S trata CIX IP5000- series T elephone UG 07/09 Related Documents/Media Note Some documents listed here may appear in different versions on the electronically or in print. T o find th e most current version, check the version/ date in the Publication In formation on the back of the document’ s title page.
S trata CIX IP5000-series T elephone UG 07/09 1 The Grand T our 1 The IP5000-series telephones connected to a Strata CIX telephone system, running Release 5.2 or higher software, include a selection of IP telephone models and matching IP add-on modu les, as well as a 60 button DSS Console.
The Grand T our 2 S trata CIX IP5000-series T elephone UG 07/09 T able 1 IP5000 Series T ele phone s Description Image 10 Button IP T elephone: • 4 line LCD with back light option • Full duplex S .
The Grand T our S trata CIX IP5000-series T elephone UG 07/09 3 The IP5000-series telephone upgrade option s includ e: T able 2 IP5000 Series Add -on Modul es Description Image 10 Button ADM for IP500.
The Grand T our IP5000-series T elephone Overview 4 S trata CIX IP5000-series T elephone UG 07/09 IP5000-series T e lephone Overview The illustration of the IP5000- series telephone shown belo w gives a general idea of the basic attribut es found on most of these teleph ones.
The Grand T our IP5000-series T elephone Overview S trata CIX IP5000-series T elephone UG 07/09 5 Fixed Buttons The fixed buttons on the dial pad help perfo rm standard functions quickly and easily . Layout s Fixed buttons are laid out diff eren tly on the IP5000-series telephones.
The Grand T our IP5000-series T elephone Overview 6 S trata CIX IP5000-series T elephone UG 07/09 The Fixed buttons are describe d below . T able 3 Fixed Butto n Definitions Button Definitions Message (Msg): When Msg LED flashes, press Msg to call back the station or voice mail device that ac tivated the LED.
The Grand T our IP5000-series T elephone Overview S trata CIX IP5000-series T elephone UG 07/09 7 Navigation Key: Round button o n th e IP5131 telephone is a na vigation key used for moving t he cursor o n html pages and in the programmin g screens. C enter of th e button is the “selec t” functio n.
The Grand T our IP5000-series T elephone Overview 8 S trata CIX IP5000-series T elephone UG 07/09 Programmable Feature Buttons Programmable Feature Buttons are programmed by the System Administrator and can be customized on a per user basis. See T abl e 24 on page 176 for a list of Programmable Feature Buttons.
The Grand T our LCD S trata CIX IP5000-series T elephone UG 07/09 9 LCD 9-Line LCD Display The LCD on the 9-Line LC D telephone (sh own below) in idle state shows: T op to Bottom Line 1 or the top line of the LCD will di splay your user name (if programmed) and your extension numb er .
The Grand T our LCD 10 S trata CIX IP5000-series T elephone UG 07/09 Browser Note This feature applies to the IP5131-SDL telephone. T oshiba’ s IP5131-SDL with it’ s lar ge display screen also supports an HTML browser to allow navigation on the W o rld W ide W eb or a company’ s intranet.
S trata CIX IP5000-series T elephone UG 07/09 11 Sof t Keys Softkeys (SK1 - SK4) refer to the four buttons directly below the LCD screen (shown right).
This page is intentionally left blank..
S trata CIX IP5000-series T elephone UG 07/09 13 The Basics 2 This chapter reviews the basic operations of the IP5000-series telephones. The instructions apply to a ll telephone model s, except when noted ot herwise.
The Basics Customizing Y our T elephone 14 S trata CIX IP5000-series T elephone UG 07/09 T o adjust handset Beep T one 1. W ith the handset of f-hook, dial the Beep T one Adjustment Code #6101 (default code). Y ou hear beep tone . 2. Press Vo l or Vo l to reach the des i red level.
The Basics Customizing Y our T elephone S trata CIX IP5000-series T elephone UG 07/09 15 Brightness Control A vailable on backlit telephones with 4-line LCD’ s and back lit add-on module. T o change the LCD back light brightness 1. Press Hold + 3 + 6 + 9 (simultaneou sly).
The Basics Customizing Y our T elephone 16 S trata CIX IP5000-series T elephone UG 07/09 Backlight On/Off A vailable on backlit telephon es and backlit add-on module. T o change Backlight Settings 1. Press Hold + 3 + 6 + 9 (simultaneou sly). 2. Press the Mic button.
The Basics Keystrip Labels S trata CIX IP5000-series T elephone UG 07/09 17 Keystrip Labels A vailable on 9 Line LCD telephone and 1 0 Button LCD Add-on Modu le T o program LCD Keystrip Labels 1. Dial #9876 (or press the flexible Prog r am button) 2.
The Basics Ring T ones 18 S trata CIX IP5000-series T elephone UG 07/09 Dial Pad and Button Beep s IP telephones can emit a “be ep” whenever a dial pad or feature button is pressed. The “beeps” are On by default. Follow these steps to turn the “beeps” On or Off.
The Basics Ring T ones S trata CIX IP5000-series T elephone UG 07/09 19 S peakerphone/Microphone Sensitivity Adjustment When you are using the spe akerphone, high ambie nt no ise lev els may cause the p arty you are talking with to be to cut of f frequen tly .
The Basics T elephone T erminology 20 S trata CIX IP5000-series T elephone UG 07/09 T elephone T erminology When making or receiving calls on you r IP5000-seri es telephon e yo u may experience one or more of th e following call features dep ending on how your telephone is configured.
The Basics Making a Call S trata CIX IP5000-series T elephone UG 07/09 21 Making a Call There are three ways to originate a call from the telephone: Handset 1. T o make a call, lift the ha ndset, then dial the number . A line may be automatically selected or choo se a line manually .
The Basics Making a Call 22 S trata CIX IP5000-series T elephone UG 07/09 Dial Directory This feature is supported on IP5000-series telephones with an LCD displ ay running on CIX R5.2 (or higher) software. Calls can be made by selecting a name from the alphabetical telephone directory.
The Basics Making a Call S trata CIX IP5000-series T elephone UG 07/09 23 BOB L (PRI) BOB LA W VER BRAD FISHER ONE TOU CH ONE TOU CH PICKUP ONE TOUC H CF AC ONE TOUC H NEXT DND Ext. 4227 ONE T OUCH ONE TOUC H BACK CNCL BILL THOMAS BRAD FERR IS BRIAN SMITH Press the key next to the displayed name to call that person.
The Basics Answering a Call 24 S trata CIX IP5000-series T elephone UG 07/09 Answering a Call There are several ways to answer a ca ll: Handset When the telephone is programm ed for Ringing Line Preferenc e, pick up the handset and the telephone automati cally answers the ringing line.
S trata CIX IP5000-series T elephone UG 07/09 25 On a Call While on a call you can perform the following: Switching Between Handset and Speakerphone Press Spkr and place the handset on-hook to switch from h andset to speakerphone mode. T ake the handset of f-hook to switch from speakerp hone to handset mode.
The Basics On a Call 26 S trata CIX IP5000-series T elephone UG 07/09 Automatic Hold This features enab les you to move from o ne Line button to anothe r Line button without pressing Hold. Check with your System Administrator to make sure this settin g is turned on.
The Basics Message W aiting S trata CIX IP5000-series T elephone UG 07/09 27 Message W aiting Use your Msg LED/button and LCD to see/retrieve message(s). An extension can receive up to four si multaneous Message W aiting indications and LCD messages. One message is reserved for the Message Ce nter .
The Basics Message W aiting 28 S trata CIX IP5000-series T elephone UG 07/09 T urning On/Off MW LED on Another Extension If you call an extension and it’s busy or there is no answer, you may be able to light that extension’s Message Waiting LED and en able that extensio n to call you back.
The Basics Message W aiting S trata CIX IP5000-series T elephone UG 07/09 29 LED Indicator Det ails Each line and Programmable Feature Button has a LED next to it which indicates the status of the line or feature associated w ith the button. Line LEDs light red or green and flash at varying rates to indicate call status (see Ta b l e 6 ).
This page is intentionally left blank..
S trata CIX IP5000-series T elephone UG 07/09 31 Sof tIPT 3 The SoftIPT is a software phon e client that runs on appropriatel y equipped wired or wireless laptops, tablets and desktop PCs with all versions of Microsoft ® W ind ows Vi s t a TM and Microsoft ® W i ndows XP ® operating software (OS).
SoftIPT Message W aiting 32 S trata CIX IP5000-series T elephone UG 07/09 Sof tIPT Icons The special buttons relating to the SoftIPT screen are described below . T able 7 SoftIPT Button Definitions Button Definitions SoftIPT Directory – Clicking this icon enables y ou to access the directory you crea te using MS Outloo k.
SoftIPT Message W aiting S trata CIX IP5000-series T elephone UG 07/09 33 Fixed Buttons The fixed buttons on yo ur telephone enable you to perform standard functions quickly and easily .
SoftIPT Configuring SoftIPT 3.0 34 S trata CIX IP5000-series T elephone UG 07/09 Configuring Sof tIPT 3.0 St e p 1 : Configure the SoftIPT 1. After you ha ve insta lled SoftIPT , double- click the SoftIPT icon on the desktop. The SoftIPT Configuration window o pens.
SoftIPT Configuring SoftIPT 3.0 S trata CIX IP5000-series T elephone UG 07/09 35 2. In the SoftIPT Configuratio n window , enter the following: Fields Description Phone No. This is the SoftIPT extension. Password Password for IP user mobility Node The node ID where the MIPU resi des.
SoftIPT Configuring SoftIPT 3.0 36 S trata CIX IP5000-series T elephone UG 07/09 3. Click OK. Automatic startup Check this box to automatically st artup SoftIPT after starting your PC. Note If Automatic startup is un checked and SoftIPT continues to start up, use the MSCONFIG utility screen > S tartup ta b and uncheck T oshiba Soft IPT .
S trata CIX IP5000-series T elephone UG 07/09 37 T o check how many Outlook pr ofiles ar e on your PC 1. Go to S tart > Control Panel > Mail 2.
SoftIPT Configuring SoftIPT 3.0 38 S trata CIX IP5000-series T elephone UG 07/09 Figure 3 Mail Profiles.
SoftIPT Basic SoftIPT Functions S trata CIX IP5000-series T elephone UG 07/09 39 Basic Sof tIPT Functions S t art the Sof tIPT Double-click the SoftIPT icon on your desktop. Making a Call To make a call 1. Click Speaker then select the on-screen dial pad buttons to dial a call.
SoftIPT Basic SoftIPT Functions 40 S trata CIX IP5000-series T elephone UG 07/09 Answering a Call To answer a call using the Shift button If the LCD screen is set to view keys 1 1~20 and a cal.
SoftIPT Basic SoftIPT Functions S trata CIX IP5000-series T elephone UG 07/09 41 Using the Directory Y ou can create a directory with M S Outlook (not Outlook Express). 1. Close SoftIPT if you are using it. 2. Open MS Outlook. 3. Double click on the Contacts icon, click on the New contact icon.
SoftIPT Basic SoftIPT Functions 42 S trata CIX IP5000-series T elephone UG 07/09 Using Echo Canceller If you have a headset plugged into the microph one/ speaker jack of th e PC, you do not have to always ena ble echo cance ller .
S trata CIX IP5000-series T elephone UG 07/09 43 Feature Operations 4 This chapter gives you more details about your IP5000-series telepho ne’ s advanced functions. An alphabetical lis t of supported features has b een compiled in this chapter for fast and easy reference.
Feature Operations Account Code Calls 44 S trata CIX IP5000-series T elephone UG 07/09 Forced Account Codes Some applications require you to enter an Account Code. These Forced Account Codes may be verified or non-verified, depe nding up on the applica tion, but in either case, the caller must enter a code before proceeding.
Feature Operations Account Code Calls S trata CIX IP5000-series T elephone UG 07/09 45 V olunt ary Account Codes (V erified/Non-V erified) V oluntary Account Codes are optional. They can be entered during a call and are used for tracking selected calls using Station Message Detail Report (SMDR) call detail recording option.
Feature Operations Advisory Messages 46 S trata CIX IP5000-series T elephone UG 07/09 Advisory Messages Advisory messaging enables you to store an informativ e message for LCD telephones that call your telephone. The messages can be up to 16 characters long.
Feature Operations Alarm Notification Button S trata CIX IP5000-series T elephone UG 07/09 47 Alarm Notification Button The Alarm Notificatio n Button must be setup by your System Administrator on you r station. When the Alarm Notifi cation button displays Call your System Administrator.
Feature Operations Automatic Callback 48 S trata CIX IP5000-series T elephone UG 07/09 Automatic Callback When you reach a busy station, you can set Automatic Callback to have the system monitor the busy extensi on and no tify you when it becomes idle.
Feature Operations Backgr ound Music S trata CIX IP5000-series T elephone UG 07/09 49 Background Music Y ou can set bac kground music over yo ur tele phone speaker or over external speakers.
Feature Operations Call Forwar d 50 S trata CIX IP5000-series T elephone UG 07/09 Call Forward There are two types of Call Forwarding that you can set. One is System Call Forward (set in System Programming) which auto matically directs calls to a predefined location, such as V oice Mail.
Feature Operations Call Forwar d S trata CIX IP5000-series T elephone UG 07/09 51 S t ation Call Forward Categories Y ou can set Call Forward for the followi ng categories of calls. Within these categories, you can use five different types of Call Forward Settings (as detailed in the next section).
Feature Operations Call Forwar d 52 S trata CIX IP5000-series T elephone UG 07/09 S t ation Call Forward Procedures T able 22 on Page 171 contains Call Forward Button sequences. Y ou can do a Call Forward function by entering the button sequence as desc ribed or by programming a Programmable Feature Button to perform the sequence.
Feature Operations Call Forwar d S trata CIX IP5000-series T elephone UG 07/09 53 Call Forward Examples To set your telephone to Call Forward Busy-No Answer to an internal extension number Pre.
Feature Operations Call History 54 S trata CIX IP5000-series T elephone UG 07/09 Call History Incoming calls with Caller ID or ANI info rmation can be optiona lly recorded into a rolling list for the station where the call is ringing.
Feature Operations Call Park Orbits S trata CIX IP5000-series T elephone UG 07/09 55 Call Park Orbit s The Call Park feature enables you to hold a call temporarily in a location other than your telephone. These areas are called or bits. Y ou or another telephone user can retrieve a parked call from its orbit by sp ecifying th e orbit number .
Feature Operations Call Pickup 56 S trata CIX IP5000-series T elephone UG 07/09 T o retrieve a parked call 1. Press Par k i n O rb it or press your extension button + #32 . 2. Enter the Orbit Number where the call is parked or # for the extension from which you are calling.
Feature Operations Call Pickup S trata CIX IP5000-series T elephone UG 07/09 57 T o perform Call Pickup Press the buttons shown in the table below for the desired Pickup feature. Notes • The Primary extension number is the di rectory number by wh ich the telep hone set is defined.
Feature Operations Call T ransfer 58 S trata CIX IP5000-series T elephone UG 07/09 Call T ransfer Call transfer allows a call to be directed from one telephone to another on the CIX. External transfers to telephone numbers or network extensions off the CIX are also supported, please check with your System Administrator to see if this is enabled.
Feature Operations Call W aiting S trata CIX IP5000-series T elephone UG 07/09 59 T o transfer a call directly to V oice Mail (VM) 1. While on a call, press Cnf/T r n . 2. Enter #407 . 3. Enter the VM mailbox number (usually the same as the extension number) + # .
Feature Operations Caller ID 60 S trata CIX IP5000-series T elephone UG 07/09 Caller ID Incoming calls to your extens ion with Caller ID can be recorded into a rolling list that is saved on your telephone.
Feature Operations Confer ence Calls S trata CIX IP5000-series T elephone UG 07/09 61 T o transfe r conference contr ol 1. Complete Steps 1 and 2 above to add th e line to which you wish to transfer conference control. See previous Note. 2. Announce the call and hang up to tran sfer it.
Feature Operations Confer ence Calls 62 S trata CIX IP5000-series T elephone UG 07/09 Supervising a T andem Call 1. While talking on an outside call, press Cnf/T r n . Y ou hear dial tone. The extension LED flashes (conference rate). 2. Dial an outside telephon e number .
Feature Operations Confer ence Calls S trata CIX IP5000-series T elephone UG 07/09 63 T o add an Incoming call to the Conference 1. Place the first caller/Conference on hold. 2. Answer the incoming ringing call. 3. While speaking to the incoming caller , press Cnf/T r n button.
Feature Operations Dir ect Inward System Access (DISA) 64 S trata CIX IP5000-series T elephone UG 07/09 Direct Inward System Access (DISA) Outside callers with touch tone telephones ca n call in to lines programmed for Direct Inward System Access (DISA) and dial an exten sion or outgoing line without going through an attendant or opera tor .
Feature Operations Do Not Disturb S trata CIX IP5000-series T elephone UG 07/09 65 Do Not Disturb If your station is in Do Not Disturb (DND) mode, internal, exte rnal and transferred calls do not ring your station and Off-ho ok Call An nounce calls are denied.
Feature Operations Door Lock(s) 66 S trata CIX IP5000-series T elephone UG 07/09 Setting DND for Another Extension T o activate DND for another extension Enter #6191 (hear Entry T one) + the Primary ex tension of the remote extension + the pass code + # (hear Success T one).
Feature Operations Door Phone(s) S trata CIX IP5000-series T elephone UG 07/09 67 Door Phone(s) Door phones can be used to call phones selected in system progra mming. When a door phone calls, you hear a distinctive ringing tone, one or five times (set in system programming).
Feature Operations Echo Cancellation 68 S trata CIX IP5000-series T elephone UG 07/09 T o call/monitor a door phone 1. W ith the handset off-hook, press an extens ion button. Y ou he ar dia l tone and the LED flashes green (in-use). 2. Press #15 (hear three tone bursts), then en ter the door phone nu mber (01~24, depending on sy stem size).
Feature Operations Emer gency Ringdown S trata CIX IP5000-series T elephone UG 07/09 69 Emergency Ringdown If a station remains of f-hook for a progra mmabl e period, it can be automatically treated as an Emergency Call and directed to an emer gency des tination.
Feature Operations Message W aiting 70 S trata CIX IP5000-series T elephone UG 07/09 Message W aiting Message W aiting is shown on the Msg button which will flash red when there are messages waiting. The waiting message indi cators can come from the voicemail system or they can be internal messages sent from other extensions.
Feature Operations Message W aiting S trata CIX IP5000-series T elephone UG 07/09 71 T urning On/Off MW LED on Another Extension When an extension is called , the calling par ty can choose to send a message to the called party . This is a notification to say that a call has been missed and the calling party would like to be called back.
Feature Operations Micr ophone Cut-Off 72 S trata CIX IP5000-series T elephone UG 07/09 Microphone Cut-Off This feature prevents callers fro m monitoring the soun d s near your telephone whe n your telephone receives a Handsfree Call or cuts-off the telephone microphone while on a speakerphone call.
Feature Operations Off-hook Call Announce S trata CIX IP5000-series T elephone UG 07/09 73 Off-hook Call Announce Off-hoo k Call Announce (OCA) enabl es you to complete a call to a busy telephone. Y our tele phone must be programm ed to eith er announce automatic ally or to anno unce after you press a button on your dial pad.
Feature Operations Override Calls 74 S trata CIX IP5000-series T elephone UG 07/09 Override Calls The availab le override featu res are: • Busy Override • Do Not Disturb Override • Executive Ove.
Feature Operations Override Calls S trata CIX IP5000-series T elephone UG 07/09 75 Executive Override Executive Overrid e en ab le s yo u to enter an established conversation. Y our telephone can also be programmed to block Executive Override from other telephones.
Feature Operations Paging 76 S trata CIX IP5000-series T elephone UG 07/09 Privacy Override This feature enables you to enter an established call on a line you share with another telephone. Up to two statio n users can enter an existing Central Office (CO) line-to- station call (i.
Feature Operations Paging S trata CIX IP5000-series T elephone UG 07/09 77 All Call Page Y ou can make an All Call Page to telephon es assigned to the “All Call Page Group.” Stations are assigned to the “All Call Page Group” in system programming.
Feature Operations Privacy 78 S trata CIX IP5000-series T elephone UG 07/09 Privacy Privacy controls the ability of more than one person to use the same extension or CO line at the same time. Privacy applies to mu ltiple appearances of extensions, Phantom extensions, outside Lines and outside Line Group buttons.
Feature Operations Speed Dial S trata CIX IP5000-series T elephone UG 07/09 79 S peed Dial Speed Dial (SD) enables you to dial a sequence of up to 32 digits with a shorter code. Dial sequences can include telephone numb ers, authorization codes, passwords feature activation codes and pauses.
Feature Operations Speed Dial 80 S trata CIX IP5000-series T elephone UG 07/09 S toring a System/St ation Speed Dial Number 1. Dial #66 . The display shows “SPEED DIAL” and you hear Entry T one. 2. Dial th e Sta tion Speed Dial number (100~19 9) or System Speed Dial nu mber (200~999).
Feature Operations Speed Dial S trata CIX IP5000-series T elephone UG 07/09 81 Advanced Sp eed Dial Operation Special Characte rs SD numbers may include 0 ~ 9 , # , * and Pause. For an exampl e on how to use special characters, see page 1 19 . Long SD Numbers Up to 32 digits can be stored in one SD location.
Feature Operations Speed Dial 82 S trata CIX IP5000-series T elephone UG 07/09 S toring Personal Speed Dial Names Y ou can store names with Personal Speed Di al numbers. These names will display as Soft Keys, that can be used for dialing from the tele phone LCD directories.
Feature Operations Speed Dial S trata CIX IP5000-series T elephone UG 07/09 83 • T o move one character to the right, press SCROLL or RIGHT Soft Key . T o add a space, press the RIGHT Soft Key twice. • T o backspace (delete previous ch aracter), press the PA G E or LEFT Soft Key .
Feature Operations T ime and Date Setting (Local) 84 S trata CIX IP5000-series T elephone UG 07/09 T ime and Date Setting (Local) IP telephones will display the time, day and date of the time zone of the telephone system location it is connected to.
Feature Operations T one First / V oic e First Signalling S trata CIX IP5000-series T elephone UG 07/09 85 T o ne First / V oice First Signalling T o determine the signalling on the telephone circuit. T one First Signalling When the telephone rings and the called part y must press Spkr or lift the handset in order to receive the call.
Feature Operations T one/Pulse Dialing 86 S trata CIX IP5000-series T elephone UG 07/09 T o ne/Pulse Dialing W ith some older Central Offices, you may have to make calls on outside lines programmed for rotary dial pulses.
Feature Operations Uniform Call Distribution S trata CIX IP5000-series T elephone UG 07/09 87 Uniform Call Distribution Uniform Call Distribution (UCD) provides ACD-like service based on the simplified Distributed Hunt feature.
Feature Operations Uniform Call Distribution 88 S trata CIX IP5000-series T elephone UG 07/09 Login/Logout Login and Logout is contro lled by the Login key as sign ed to the agent phon e (see Strata CIX Programming Manual, Volume 1 for details).
S trata CIX IP5000-series T elephone UG 07/09 89 IP5122-SDC 5 The IP5122-SDC telep hon e loo ks and fun ct ions similar to the 10 Button IP telephone when connected to the S trata CIX. This ph one fully supports all the CIX features and services of a regular 10 Button IP telepho ne.
IP5122-SDC Making and Answering Calls 90 S trata CIX IP5000-series T elephone UG 07/09 Making and Answering Calls Notes • The ACO button (FB10) is the top bu tton on the telephone unless it has been repositioned in programming. • The CIX Extension button is the bottom bu tton on the telepho ne unless it has been repositioned in programming.
IP5122-SDC Local Emer gency Service (Calling 91 1) S trata CIX IP5000-series T elephone UG 07/09 91 Local Emergency Service (Calling 91 1) The key benefit of using this telephone is its ability to dial your local Emer gency service without going th rough th e CIX system .
IP5122-SDC ACO V o lume Control 92 S trata CIX IP5000-series T elephone UG 07/09 ACO V olume Control T o adjust the hand set/headset volu me Press the Vo l to increas e volume and Vo l to de creas e volume during the ACO call.
IP5122-SDC ACO LED and LCD Indication S trata CIX IP5000-series T elephone UG 07/09 93 ACO LED and LCD Indication T able 13 LED and LCD Indications ACO Operatio n ACO LED Indication ACO LCD Display Idle Blank (Off) – if CO is connected. Red – if CO is not connected.
IP5122-SDC ACO Hold 94 S trata CIX IP5000-series T elephone UG 07/09 ACO Hold Y ou can use the Hold button when using the ACO and CIX service. If yo u have ACO button auto-hold enable d in 3-6-9 program min g, the following interactions occur . The default is “No auto-hold .
IP5122-SDC ACO Operating Summary S trata CIX IP5000-series T elephone UG 07/09 95 ACO Operating Summary The following is a summary of operating ch aracteristics when us ing the ACO service on the IP5122-SDC telephone. • Y our LCD will not display Caller ID name and number when receiving a call on your ACO button .
IP5122-SDC IP5122-SDC Pr ogramming 96 S trata CIX IP5000-series T elephone UG 07/09 IP5122-SDC Programming Important! The IP5122-SD C must be programmed, using eManager, as a 20 button station (Prog. 204). Feature Button 11 (FB11) mu st be programmed as a Release button.
IP5122-SDC IP5122-SDC Pr ogramming S trata CIX IP5000-series T elephone UG 07/09 97 4. Press FB04 – Flash timing (100 ms units) (Hook Flash to the CO timing is +/- 10 ms). Press Hold . Go to the next S tep or , if you are finished programming, go to St e p 9 .
IP5122-SDC IP5122-SDC Pr ogramming 98 S trata CIX IP5000-series T elephone UG 07/09 IPT Initialization The IP5122-SDC has a fourth initia lization option (FB4). ACO Default. 1. Press 3 + 6 + 9 + Hold (simultaneously). 2. Press Vo l s then press Hold .
IP5122-SDC Local CO Line Connection S trata CIX IP5000-series T elephone UG 07/09 99 Local CO Line Connection A local CO line connection and power are required for ACO operation, including E91 1. IP5122-SDC Connec tions LINE HEAD SET HAND SET LAN PC Connect to CO Line for local CO operati on.
IP5122-SDC Local CO Line Connection 100 S trata CIX IP5000-series T elephone UG 07/09 Local CO Line Cir cuit Quick T est This procedure is a quick test to verify the CO Line connection and correct IP5 122- SDC ACO operation.
S trata CIX IP5000-series T elephone UG 07/09 101 ADM/DSS Console 6 This chapter provides an overview of the op tional units that can be connected to the IP5000-series telephones. Add-on Modules The following Add-on modules provide additional buttons: • 10 Button LCD Modul e (LM51 10), up to two supported per telepho ne .
ADM/DSS Console ADM 102 S trata CIX IP5000-series T elephone UG 07/09 ADM Buttons and LEDs The 10 button LCD add on module and the 20 button keystrip add on modu les h ave programmable feat ure buttons that can be assig ned as CO Line, Directory Number , DSS, One T ouch Speed Dial or any other programmable featur e (shown right).
ADM/DSS Conso le ADM S trata CIX IP5000-series T elephone UG 07/09 103 Adding an ADM For installation instructions, please refer to the S trata CI X Installation & Maintenance. Please read the caution, if you a re connectin g the ADM with the telephone or moving the telephone with the ADM.
ADM/DSS Console DSS Console 104 S trata CIX IP5000-series T elephone UG 07/09 DSS Console The 60 button Direct S tation Selection (DSS) Console operates alongside a digital telephone to provide 60 (up to 180) additi onal buttons (sh own right).
ADM/DSS Conso le DSS Console S trata CIX IP5000-series T elephone UG 07/09 105 T ransferring to an Idle St ation Y ou can transfer internal or outside calls to an idle station from either a DSS console or a ADM. T o transfer a call to an idle station 1.
ADM/DSS Console DSS Console 106 S trata CIX IP5000-series T elephone UG 07/09 Call T ransfer with Camp-on Y ou can transfer a call to a busy station from either a DSS console or an ADM. Use the DSS to transfer the call, even though the DSS LED associated with the station you are “transferring to” is red.
ADM/DSS Conso le DSS Console S trata CIX IP5000-series T elephone UG 07/09 107 Paging Y ou can make an announcement page to a group of te le phone sp eakers selected in system programming with All Call P age on the DSS console. SD (if programmed) on either the DSS console or the ADM ca n b e used for page announcements.
This page is intentionally left blank..
S trata CIX IP5000-series T elephone UG 07/09 109 Headset and Handset Operation 7 The IP5000-series telephones come stan dard with a built-in headset interface. Recommended Headset s For an extensive list of recommended and supported headsets please visit T oshiba's website at www .
Headset and Hand set Operation AUTO or CARBON Setting 11 0 St rata CIX IP5000-series T elephone UG 07/09 AUT O or CARBON Setting There exist two types of headsets: ECM and Carbon.
Headset and Handset Operation Headset T ransmit Le vel Adjustments S trata CIX IP5000-series T elephone UG 07/09 111 Headset T ransmit Level Adjustment s T o set the level of the Headset T ran smitter for IP5000-series telephones 1. Press 3 + 6 + 9 + Hold (simultaneously).
Headset and Hand set Operation Handset Level Adjustments 11 2 St rata CIX IP5000-series T elephone UG 07/09 Handset Level Adjustment s Change the Carbon setting if a Carbon type handset or he adset is connected to the handset jack. T o change the Carbon Setting 1.
Headset and Handset Operation Handset Level Adjustments S trata CIX IP5000-series T elephone UG 07/09 11 3 T o adjust the Handset or He adset Receiver L evel for IP5000-series te lephones 1. Press 3 + 6 + 9 + Hold (simultaneously). 2. Press Redial .
This page is intentionally left blank..
S trata CIX IP5000-series T elephone UG 07/09 11 5 User Programming 8 User programming allo ws yo u to customiz e yo ur LCD telephone. Y ou will be able to: • Enter numbers in your personal Speed Di.
User Programming Pr ogramming Featur e Buttons 11 6 St rata CIX IP5000-series T elephone UG 07/09 Programming Feature Buttons Y ou can use the User Programming Mode (described below) for customizing your IP5000-series display tele ph one without the aid of an Administrator or Service T echnician.
User Programming Pr ogrammable Featur e Button Codes S trata CIX IP5000-series T elephone UG 07/09 11 7 Setting/Changing a Programmable Feature Button’ s Function 1. Press #9876 to enter User Programming Mode. 2. Press Hold . 3. Press the Programmable Feature Button to set or change.
User Programming One T ouc h Buttons 11 8 St rata CIX IP5000-series T elephone UG 07/09 One T ouch Buttons One T ouch buttons can be used for storing fre quently used features or dialed numbers, such as Speed Dial numbers (use Speed Dial Codes to s tor e additional numbers).
User Programming One T ouch Buttons S trata CIX IP5000-series T elephone UG 07/09 11 9 Example of Spe cial Character Usage T o create a One T ouch for Park and Page under one button, pro gram the following sequence unde r the One T ou ch button. CNF #33***HOLD FB1 #30 CNF – puts the caller on hold an d gets new dial tone.
User Programming Featur e Codes 120 S trata CIX IP5000-series T elephone UG 07/09 Feature Codes Feature Access Codes are entered as a sequence on your telephone to use a particular feature. For an example of Call Forward, see “Call Forward Examples” on page 53 .
User Programming Featur e Codes S trata CIX IP5000-series T elephone UG 07/09 121 Remote Pickup (pickup another extension) Ext. button + #5#72 + Primary Ext. No. Pickup an Outside Line on Hold Ext. button + #5#73 + Outside Line on hold (001~128) Pickup a an on Hold Ext.
User Programming Featur e Codes 122 S trata CIX IP5000-series T elephone UG 07/09 Advisory Message - Activation Ext. or Phantom Ext. b utton + #411 + Message No. (see table in “Advisory Messages” on page 46 ). Hang up. Advisory Message - Cance llation Ext.
User Programming Featur e Codes S trata CIX IP5000-series T elephone UG 07/09 123 Speed Dial (S toring an SD number) Station 2 #66 + nnn + Phone No. 3 + # nnn = 100~199 SD bin numbers System 2 #66 + nnn + Phone No.
This page is intentionally left blank..
S trata CIX IP5000-series T elephone UG 07/09 125 Administrator Programming 9 Initializing the IP T elephone CAUTION! If you initialize the IP telephone , all settings r eturn to default. 1. Press 3 + 6 + 9 + Hold (simultaneously). 2. Press Vo l s . 3.
Administrator Programming IP Setup Instructio ns 126 S trata CIX IP5000-series T elephone UG 07/09 IP Setup Instructions The following steps must be completed befo re starting the telephone setup. The IP password will be assigned by the T elephone Administrator and is the verification step of the telephone registration with the CIX (xIPU).
Administrator Pr ogramming IP Setup Instructions S trata CIX IP5000-series T elephone UG 07/09 127 8. Press FB6 to enter the CIX S trata Net node numb er of the CIX node that contains the xIPU to which this I PT interfaces, then press Hold . This FB setting is for CIX networked systems only .
Administrator Programming Initial Start-up 128 S trata CIX IP5000-series T elephone UG 07/09 Initial S t art-up When an IP5000-series telephone is connected to power it will in itialize then attempt to connect to the Strata CIX system. The start-up seque nce indicators are described below .
Administrator Pr ogramming IP T elephone Function Settings S trata CIX IP5000-series T elephone UG 07/09 129 IP T elephone Function Settings These steps enable you to turn On/Off bu tton beeps, room noise cancellati on, hand set Busy Override, and headset volume control.
Administrator Programming Setting the IP T elephone Headset T ransmit V olume 130 S trata CIX IP5000-series T elephone UG 07/09 Setting the IP T elephone Headset T ransmit Vo l u m e 1. Press 3 + 6 + 9 + Hold (simultaneously). 2. Press # . 3. Press Hold 4.
Administrator Pr ogramming Reset Factory Default Settings S trata CIX IP5000-series T elephone UG 07/09 131 Reset Factory Default Settings T o reset the LCD settings to Factory defaults 1. Press 3 + 6 + 9 + Hold (simultaneously). 2. Press V olume 3.
Administrator Programming Reset Factory Defau lt Settings 132 S trata CIX IP5000-series T elephone UG 07/09 LCD Backlight Setting 1. Press 3 + 6 + 9 + Hold (simultaneously). 2. Press MIC 3. Press Hold , display shows LCD backlight setting. 4. Press FB01 to change Backlight mode.
Administrator Pr ogramming Reset Factory Default Settings S trata CIX IP5000-series T elephone UG 07/09 133 Handset / Headset Side T one V olume Setting 1. Press 3 + 6 + 9 + Hold (simultaneously). 2. Press Redial button. 3. Press Hold to access Sound Level Setting Mode.
Administrator Programming IP5131-SDL Settings 134 S trata CIX IP5000-series T elephone UG 07/09 IP5131-SDL Settings This section contains instructions to configure the IP5131-SDL telephone. All instructions found in this section pertain to the items found in th e IP Configurations screen of the IP5131-SDL telephon e.
Administrator Pr ogramming IP5131-SDL Settings S trata CIX IP5000-series T elephone UG 07/09 135 Sound Page 1:Displays settings for Keybe ep, Roam Noise, Handset BOV , and Carbon Handset and Carbon Headset. Page 2:Displays or sets the Head set and Handset Con trol Modes as well as the T ransmit and Receiver levels.
Administrator Programming IP5131-SDL Settings 136 S trata CIX IP5000-series T elephone UG 07/09 T able 20 IP5131-SDL Default Settings Major items Minor items Initial value Network Diagnosis 1 Ping address 0.0.0.0 Network Setti n g (Basic) 1 DHCP server mode <ON/OFF> ON 2 IP address 127.
Administrator Pr ogramming IP5131-SDL Settings S trata CIX IP5000-series T elephone UG 07/09 137 Sound Setting 1 Key beep <ON/OFF> ON 2 Room noise <ON/OFF> OFF 3 Handset BOV <ON/OFF>.
Administrator Programming IP5131-SDL Settings 138 S trata CIX IP5000-series T elephone UG 07/09 Network Settings T o access the Network Setting screens 1. Press Hold + 3 + 6 + 9 (simultaneously), choo se the Network soft key . 2. From the IP Configurations screen, th ere are three screens for Network Settings (shown below).
Administrator Pr ogramming IP5131-SDL Settings S trata CIX IP5000-series T elephone UG 07/09 139 DHCP Server Settings 1. Press Hold + 3 + 6 + 9 (simultaneously). 2. From the IP Configurations screen, choose Network > DHCP . The DHCP Mode screen displays.
Administrator Programming IP5131-SDL Settings 140 S trata CIX IP5000-series T elephone UG 07/09 IP Address 1. Press Hold + 3 + 6 + 9 (simultaneously). 2. From the IP Configurations screen, choose Network > IP Addr . The IP Address screen displays (shown right).
Administrator Pr ogramming IP5131-SDL Settings S trata CIX IP5000-series T elephone UG 07/09 141 Subnet Mask 1. From the IP Configurations screen, choose Network > Subnet. The Subnet Mask screen displays (show n right). The current subnet di splays on the one-line text field.
Administrator Programming IP5131-SDL Settings 142 S trata CIX IP5000-series T elephone UG 07/09 St ation ID From the IP Configurations screen, choose Network > Stat ion. The Station ID screen displays (shown right). The current S tation ID displays.
Administrator Pr ogramming IP5131-SDL Settings S trata CIX IP5000-series T elephone UG 07/09 143 CIX System /IPU Address Mode 1. From the IP Configurations screen, choose Network > > IPU Mode. 2. Press the Manual or Broadcas t soft key to change the set value.
Administrator Programming IP5131-SDL Settings 144 S trata CIX IP5000-series T elephone UG 07/09 Port Setting 1. From the IP Configu rations screen, choose Network > > Port Setting. The Port Setting screen displays. 2. Press the Dynamic or Static softkey to change the set value.
Administrator Pr ogramming IP5131-SDL Settings S trata CIX IP5000-series T elephone UG 07/09 145 Advanced Network Settings T o access the Advance d Network Setting screens 1. Press Hold + 3 + 6 + 9 (simultaneously). 2. Press Advanced softkey , the Ad vanced Setting screen appe ars.
Administrator Programming IP5131-SDL Settings 146 S trata CIX IP5000-series T elephone UG 07/09 IP Address for Primary DNS (Domain Name Se rver) Note If DHCP Mode is ON, you don’ t have to set any p arameters for the DNS server . 1. From IP Configurations > Advanced > P-D NS.
Administrator Pr ogramming IP5131-SDL Settings S trata CIX IP5000-series T elephone UG 07/09 147 GRQ Port Number 1. From IP Configurations > Advanced > GRQ Port. The current GRQ Port Number displays (shown right). 2. Enter the New number . (Maximum 5 digits).
Administrator Programming IP5131-SDL Settings 148 S trata CIX IP5000-series T elephone UG 07/09 T able 21 Dial Pad Alph anumeric Characters Dial Pad Buttons Number of times to press the dial pad butto.
Administrator Pr ogramming IP5131-SDL Settings S trata CIX IP5000-series T elephone UG 07/09 149 External Administration T erminal IP Address Upper Bound Setting This screen can be used to set an External Administration T erminal IP Address Upper Bound.
Administrator Programming IP5131-SDL Settings 150 S trata CIX IP5000-series T elephone UG 07/09 External Administration T erminal IP Address Lower Bound Setting This screen can be used to set an Extern al Administration T e rminal IP Address Lower Bound.
Administrator Pr ogramming IP5131-SDL Settings S trata CIX IP5000-series T elephone UG 07/09 151 External Administration User ID Setting Use this screen to set an User ID. External accessing is enabled when the user can successfully log in with correct User ID and Password 1.
Administrator Programming IP5131-SDL Settings 152 S trata CIX IP5000-series T elephone UG 07/09 Dynamic Port Base 1. From IP Configurations > Advanced > > Dynamic Port Base. The Dynamic Port Base screen displays (shown right). 2. Enter the new port number (maximum 5 characters) .
Administrator Pr ogramming IP5131-SDL Settings S trata CIX IP5000-series T elephone UG 07/09 153 PC Port T ype 1. From IP Configurations > Advanced > > > PC Port T ype. The PC Port T ype screen displays (shown right). 2. Press the Access or T runk softkey to set the value.
Administrator Programming IP5131-SDL Settings 154 S trata CIX IP5000-series T elephone UG 07/09 Sound Settings T o access the Sound Setting screens From the IP Configurations menu, choose the Sound soft key . Note There are three screens for Sound Settings (s hown below).
Administrator Pr ogramming IP5131-SDL Settings S trata CIX IP5000-series T elephone UG 07/09 155 Keybeep, Room Noise, Handset BOV , Carbon Handset, and Carbon Headset Important! The following steps apply to all of the above items. 1. From the IP Configurations screen, select Sound > Keybeep (or any of the above items).
Administrator Programming IP5131-SDL Settings 156 S trata CIX IP5000-series T elephone UG 07/09 Headset Tx V olume Setting Screen From the IP Configurations screen, select So und > > Headset Tx V ol. The Headset Tx V olume screen displays. T o C hange Information on this screen 1.
Administrator Pr ogramming IP5131-SDL Settings S trata CIX IP5000-series T elephone UG 07/09 157 Headset Tx and Rx V olume 1. From the IP Configurations screen, select Sound > > Handset Tx/Rx V olume. The appropriate screen will display . 2. Enter the new volume level.
Administrator Programming IP5131-SDL Settings 158 S trata CIX IP5000-series T elephone UG 07/09 Key Repeat From the IP Configurations menu, select Key Repeat.
Administrator Pr ogramming IP5131-SDL Settings S trata CIX IP5000-series T elephone UG 07/09 159 Repeat Delay T imer and Repeat Rate T imer Important! The following steps apply to the above two items. From the IP Configurations menu, select Key Repeat > Repeat Delay T imer or Repeat Rate T imer .
Administrator Programming IP5131-SDL Settings 160 S trata CIX IP5000-series T elephone UG 07/09 Other Setting From the IP Configurations menu, select Others. The Others screen displays. This screen contains Language, Input timer Mode, Input T imer V alue settings, Backlight settings.
Administrator Pr ogramming IP5131-SDL Settings S trata CIX IP5000-series T elephone UG 07/09 161 Input Time r Mode Se tting Screen 1. From the IP Configur ations menu, se lect Others > Input T imer Mode. The Input T imer Mode Setting screen displays.
Administrator Programming IP5131-SDL Settings 162 S trata CIX IP5000-series T elephone UG 07/09 Backlight Mode Screen 1. From the IP Configurations menu, select Others > BL Mode. The Backlight Mode screen displays. 2. Choose Always Off, Always On or On-Demand softkey to setup when yo u would like to use the backlight.
Administrator Pr ogramming IP5131-SDL Settings S trata CIX IP5000-series T elephone UG 07/09 163 Loop Back T est 1. Press Hold + 3 + 6 + 9 (simultaneously). 2. From the IP Configurations screen, select Net Diag > Loop Back T e st. Notes • Press Exit to move back a screen.
Administrator Programming IP5131-SDL Settings 164 S trata CIX IP5000-series T elephone UG 07/09 5. Select the Cancel so ft key to cancel the intended setting change and to move to the Loop Back T est Screen without rewriting the NV -RAM data. Ping St art and Stop From the Loop Back T est screen, press the Ping Start soft key .
Administrator Pr ogramming IP5131-SDL Settings S trata CIX IP5000-series T elephone UG 07/09 165 Factory From the IP Configurations menu select Factory .
Administrator Programming IP5131-SDL Settings 166 S trata CIX IP5000-series T elephone UG 07/09 Display/Key T est 1. From the IP Configurations menu select Factory > Display/Key T est. The Displa y/Key T est Mo de screen displays. 2. Press the soft key next SK01~SK14.
Administrator Pr ogramming IP5131-SDL Settings S trata CIX IP5000-series T elephone UG 07/09 167 Display Mode 1. From the IP Configurations menu select Factory > Display Mode. The Display Mode screen displays. 2. Press the IP5131 or T est soft keys to change the set value.
Administrator Programming IP5131-SDL Settings 168 S trata CIX IP5000-series T elephone UG 07/09 Initialize Select Configuration > Initialize. The Initialize screen displays.
Administrator Pr ogramming IP5131-SDL Settings S trata CIX IP5000-series T elephone UG 07/09 169 Reset 1. From the IP Configurations menu select Reset. The Reset screen displays. This screen will also display when you press the Set soft key after a setting change is made in the Network, Adva nced and Initialize screens.
This page is intentionally left blank..
S trata CIX IP5000-series T elephone UG 07/09 171 Refer ences A This Appendix contains table that su pport some of the feature operations. Call Forward T able 22 Call Forward Procedur e Feature Button Sequence Call Forward Any Call - Internal and Incoming Line Call s: Forwards any call, whe ther an internal c all or incoming line call.
S trata CIX IP5000-series T elephone UG 07/09 172 Call Forward - Incoming Line Calls: Forward incoming line calls only . All Calls to an ext. Press ext. button + #6013 (tone) + dial the dest. ext. no. (tone) All Calls to outside telephone no. Press ext.
References Call Forwar d S trata CIX IP5000-series T elephone UG 07/09 173 No Answer to outside telephone no. Press ext. button + #6032 (tone) + dial the other telephone’ s ext. no. + enter other telephone’ s Call Forw ard pass code (tone) + # + outside line access code + dest.
S trata CIX IP5000-series T elephone UG 07/09 174 Cancel Press ext. button + #6054 (tone) + dial the other telephone’ s ext. no. + enter other telephone’ s Call Fo rward pass code + # (tone) Change Call For w ard Pass Code: Y our telephone must be enabled in programming to h ave the ability to change pass codes.
References Soft Keys S trata CIX IP5000-series T elephone UG 07/09 175 Sof t Keys The table below is a list of soft key labels tha t appear on the LCD telephones. Press the soft key button associated with the label to activate the feature ( SK1 , SK2 , SK3 and SK4) .
References Button Labels 176 S trata CIX IP5000-series T elephone UG 07/09 Button Labels The button labels in Ta b l e 2 4 are for the Programmable Buttons on the telephone.
References Button Labels S trata CIX IP5000-series T elephone UG 07/09 177 DSS Direct S tation Selection(s) – Press to ring a preselected station. The LED associated with each DSS button provides the status (idle/busy) of the station assigned to the button.
S trata CIX IP5000-series T elephone UG 07/09 178 Release and Ans Release and Answer – Press to discon nect or comple te the transfer the current outsi de or extension call and automa tically answer the new inc o mi ng o utside or extension call.
References Button Labels S trata CIX IP5000-series T elephone UG 07/09 179 120 CO L i n e x x x Line XXX(Caller ID) Ye s 130 CO Line Group L i n e G r p x x x Line Grp XXX(Caller ID) Ye s 140 Pooled L.
References Button Labels 180 S trata CIX IP5000-series T elephone UG 07/09 900 Application St a r t - Application #93 A C D H e l p ACD Help Ye s 900 Application St a r t - Application #94 A C D P i c.
S trata CIX IP5000-series T elephone UG 07/09 181 Hardwar e Connections B IP5000-Series T elephone T ilt Angles The IP5000-series telephones ha ve three tilt positi ons built in to the base. There is also a tilt stand extension that adds an additional 20 degrees of tilt.
Hardware Connections IP5000-Series T elephone T ilt Angles 182 S trata CIX IP5000-series T elephone UG 07/09 IP5000-Series Desk-top Tilt Angle With T ilt-St and Extension IP5000-Series Wall Mount Angl.
Hardware Connections Connector Icons S trata CIX IP5000-series T elephone UG 07/09 183 Connector Icons The connecto rs on the IP50 00-series telephones are id entified wit h icons.
Hardware Connections Wi r i n g 184 S trata CIX IP5000-series T elephone UG 07/09 Wir i n g IP5000-series T eleph one Connectors LAN Cable LAN Connection from internal switch (optional) Handset Local Power Headset ACO Line (SDC S tatio n only) The IP5000-series telephones incl ude the special long-tail handset cords required to fit the tilt bases.
S trata CIX IP5000-series T elephone UG 07/09 185 Centr ex Application C Y our system may be equipped with the Centrex Application, wh ich enhances its feature capability when installed behind a Centrex or PBX syst em.
Centrex Application Delayed Ringing 186 S trata CIX IP5000-series T elephone UG 07/09 Delayed Ringing Outside line or Centrex lin e(s) can be programm ed fo r a 12-second and/o r 24 -second ring delay at stations to permit alternate answering cond itions.
S trata CIX IP5000-series T elephone UG 05/09 187 Index A abandoned call numbers (see Call History), 54 about this book conventions, x how to use this guide, x organization, ix related documents, xii .
Index D ~ F 188 S trata CIX IP5000- series T elephone UG 05/09 any call, 51 override, 107 station, 50 system, 50 call history, 54 call hold, 25 calling, 21 calling from SoftIPT, 39 , 40 call park, 120.
Index G ~ O S trata CIX IP5000-series T elephone UG 05/09 189 verified), 43 G group pick up, 56 H handset calling, 21 handsfree answerba ck, 24 Hold, 7 hold, 25 line hold, 55 , 58 hot dialing, 20 , 21.
Index P ~ V 190 S trata CIX IP5000- series T elephone UG 05/09 P paging, 56 , 107 access codes, 117 , 12 2 park, 120 park in orbit, 55 park in orbit, 55 pickup, 56 pick up group calls, 56 privacy, 78 .
Un punto importante, dopo l’acquisto del dispositivo (o anche prima di acquisto) è quello di leggere il manuale. Dobbiamo farlo per diversi motivi semplici:
Se non hai ancora comprato il Toshiba Strata CIX IP5000-UG-VC è un buon momento per familiarizzare con i dati di base del prodotto. Prime consultare le pagine iniziali del manuale d’uso, che si trova al di sopra. Dovresti trovare lì i dati tecnici più importanti del Toshiba Strata CIX IP5000-UG-VC - in questo modo è possibile verificare se l’apparecchio soddisfa le tue esigenze. Esplorando le pagine segenti del manuali d’uso Toshiba Strata CIX IP5000-UG-VC imparerai tutte le caratteristiche del prodotto e le informazioni sul suo funzionamento. Le informazioni sul Toshiba Strata CIX IP5000-UG-VC ti aiuteranno sicuramente a prendere una decisione relativa all’acquisto.
In una situazione in cui hai già il Toshiba Strata CIX IP5000-UG-VC, ma non hai ancora letto il manuale d’uso, dovresti farlo per le ragioni sopra descritte. Saprai quindi se hai correttamente usato le funzioni disponibili, e se hai commesso errori che possono ridurre la durata di vita del Toshiba Strata CIX IP5000-UG-VC.
Tuttavia, uno dei ruoli più importanti per l’utente svolti dal manuale d’uso è quello di aiutare a risolvere i problemi con il Toshiba Strata CIX IP5000-UG-VC. Quasi sempre, ci troverai Troubleshooting, cioè i guasti più frequenti e malfunzionamenti del dispositivo Toshiba Strata CIX IP5000-UG-VC insieme con le istruzioni su come risolverli. Anche se non si riesci a risolvere il problema, il manuale d’uso ti mostrerà il percorso di ulteriori procedimenti – il contatto con il centro servizio clienti o il servizio più vicino.
