Manuale d’uso / di manutenzione del prodotto MW30G71 del fabbricante Toshiba
Vai alla pagina of 84
.
2 Introduction Dear Customer , T hank you for purchasing this T oshiba TV . T his manual will help you use the many exciting features of your new T V . Befor e operating the TV , please read this manual completely , and keep it nearby for future reference.
3 Introduction.
4 Introduction IMPOR T ANT SAFEGU ARDS S 24) Always operate this equipment from a 120V AC, 60 Hz power source only. 25) Always make sure the antenna system is properly grounded to provide adequate protection against voltage surge s and built-up static charge s (see Section 8 10 of the National Electric Code).
5 Introduction SAFETY PRECA UTION/ P ower sour ce CA UTION: THIS DIGIT AL VIDEO PLA YER EMPLO YS A LASER SYSTEM. TO ENSURE PROPER USE OF THIS PR ODUCT , PLEASE READ THIS OWNER'S MANU AL CAREFULL Y AND RET AIN FOR FU- TURE REFERENCE. SHOULD THE UNIT REQUIRE MAINTE- NANCE, CONT ACT AN A UTHORIZED SERVICE LOCA TION.
Introduction 6 Precautions Notes on handling When shipping the unit, the original shipping car ton and packing materials come in handy . For maximum protection, repack the unit as it was originally packed at the factory . Do not use volatile liquids , such as insect spray , near the unit.
Introduction 7 Contents Introduction IMPOR T ANT SAFEGU ARDS ........................... 2 SEFETY PRECAUTIONS ................................ 5 Power source ................................................... 5 Precautions ...........................
Introduction 8 Structure of disc contents Normally , D VD video discs are divided into titles, and the titles are sub-divided into chapters. Video CDs and A udio CDs are divided into tracks.
Introduction 9.
Introduction 10 Notes and information (continued) This unit can play the f ollowing cards . Pla yab le Media cards Notes on Media car ds • Ensure that you insert the Media card correctly into the media card slot. • Ne ver remov e the Media card or tur n off the unit while using the Media card.
Introduction 11.
Introduction 12 Identification of controls (continued) Remote control The instructions in this manual describe the function on the remote control. See the page in for details . *D VD MENU button Use the D VD MENU button to displa y the menu included on many D VD video discs.
Introduction 13 Operation: • Aim the remote control at the remote sensor and press control buttons to operate. • Operate the remote control within 30 ° angle on either side of the remote sensor , up to a distance of approx. 5 meters. Replace the compar tment cov er .
14 Connections.
15 Connections For basic cable TV service not requiring a converter/ descrambler box, connect the cable TV 75 ohm coaxial cable directly to the Antenna jack on the back of the unit.
16 Connections Connecting to optional equipment Before connecting the unit to other equipment, be sure to turn off the power and unplug all of the equipment from the wall outlet bef ore making any connections.
17 Connections Connecting an HDMI™ device to the HDMI input The HDMI [1] input on your unit receives digital audio and uncompressed digital video from an HDMI device or uncompressed digital video from a DVI [2] device.
18 Connections.
19 Connections.
20 Basic setup Press PO WER. The starting setup function begins and the Language setup menu appears on the screen. Press or to select y our desired language , then press ENTER. Starting setup The STARTING SETUP function makes installing your unit easily.
21 Basic setup • Depending on the reception condition, it may take approx. thirty minutes. • The POWER indicator will light. Clock setting The auto clock function will automatically set the b uilt-in clock (Month, Da y , Y ear and Time) when the unit is connected to an antenna or cab le system and it is turned off.
22 Basic setup Press MENU in the TV/VCR mode, then press or to select TV SETUP menu. 1 Press or to select “ST AND ARD TIME” , then press . 2 Press or t o select your time zone, then press ENTER.
23 Basic setup Manual c lock setting Y ou must set the date and time manually for timer recordings , ON/OFF timer and daylight sa ving time if the auto clock process did not set them correctly . Notes: • After a power f ailure or disconnection of the po wer , the timer settings will be lost.
24 TV/VCR 8:47 AM MON Hi-Fi FULL DIGITAL TRACK STEREO 00:15:12 SP Press or to select the desired language: English (ENGLISH), French (FRANÇAIS) or Spanish (ESPAÑOL). 3 Press MENU in the TV/VCR mode, then press or to select TV SETUP menu. 1 Press RETURN to make the menu screen disappear .
25 TV operation TV operation Adjust the volume level by pressing VOL + or – . The volume level will be indicated on the screen by green bars. As the volume level increases, so do the number of bars. If the volume decreases, the number of green bars also decreases.
26 ■ CHANNEL UP/DOWN Press and release CH or . The channel auto- matically stops at the ne xt channel set into memor y . F or proper oper ation, before selecting channels, the y should be set into the memor y . See “T o memor iz e channels” 28 .
27 TV operation Closed captions Captions: This closed caption mode will display te xt on the screen in English or another language (depending on the setting of the closed captions CH 1/2). Generally , closed captions in English are transmitted on captions channel 1 and closed captions in other lan- guages are transmitted on captions channel 2.
28 Select the desired channel to be added or deleted using Direct channel selection buttons (0–9) or CH or . 2 Press MENU in the TV/VCR mode, then press or to select TV SETUP menu. Press or to select “TV/CABLE”. 1 2 Press RETURN to make the menu screen disappear .
29 TV operation Repeat steps 1-4 for up to 12 channels. Programming your favorite c hannels You can preset up to 12 of your favorite channels using the Favorite Channel Programming feature. Because this feature scans through only your favorite channels, it allows you to skip other channels you do not normally watch.
30 TV operation Labeling channels/Labeling the video input sources Channel labels appear above the channel number display each time you watch the TV, select a channel, or press DISPLAY . You can choose any four characters to identify a channel. The video label feature allows you to label each input source for your TV.
31 TV operation Press MENU in the TV/VCR mode, then press or to select LOCKS menu. To register passw ord Notes: • If you f orget the passw ord, you cannot set the V -Chip. •T o av oid forgetting the pass word, write it down and keep in the safe place.
32 TV operation Press or to select “V-CHIP”. 3 To set the V -Chip OFF : TV RA TING is not set TV -Y : All children TV -Y7 : 7 years old and above TV -G : General audience TV -PG : Parental guidanc.
33 TV operation Repeat steps 1 through 5 to lock other channels. Press or to select “SET”, then press ENTER. If you returen to LOCKS menu, select “LOCKS MENU” them press . Locking the channels 1 With the CH LOCK feature , you can lock specific channels .
34 TV operation ENTER / / / Press MENU in the TV/VCR mode, then press or to select LOCKS menu. Press or to display the password entering mode. Use the Number buttons (0-9) to enter your password, then press ENTER.
35 TV operation Y ou can lock the front panel buttons to pre vent your settings from being changed accidentally (by children, f or example). When the front panel lock is in ON, all control b uttons on the unit’ s front panel (except PO WER) do not operate.
36 TV operation.
37 TV operation To set the off timer To set the of f timer This f eature allows you to hav e the unit turn off automatically at a predetermined time. If you program the OFF TIMER once, the unit will automatically turn off at the same time ev er yday .
38 TV operation After your desired setting, press RETURN to make the menu screen disappear . Press or to select the item you want to adjust, then press or to adjust the setting. 1 2 Press MENU in the TV/VCR mode, then press or to select PICTURE menu. After your desired setting, press RETURN to make the menu screen disappear .
39 TV operation CableClear ® reduces visib le interference in y our TV picture. This is useful when receiving a broadcast with a weak signal (espe- cially a Cable channel) or playing a video cassette or disc damaged by repeated use . Change the picture quality by selecting from three preset color temperatures—cool, medium, and warm.
40 TV operation.
41 TV operation.
42 TV operation Selecting the picture size (continued) You can view 480i and 480p format programs in a variety of picture sizes—Natural, TheaterWide 1, TheaterWide 2, TheaterWide 3, and Full. The way the image displays in any of the picture sizes will vary depending on the format of the program you are viewing.
43 TV operation.
44 TV operation Stereo and Second A udio Program (SAP)/ Sound control adjustment The unit is equipped with a feature known as multi-channel TV sound or MTS. MTS broadcasts greatly enhance TV viewing by bringing you programs with high fidelity stereo sound.
45 TV operation Selecting the HDMI audio input source/ Resetting your audio adjustments See page 17 for details on connecting an HDMI or a D VI device to the TV’ s HDMI input. If you connect a D VI de vice, to hear audio you must also connect the analog audio cab les to the HDMI audio IN jacks (see page 17.
46 Playback (VCR) Loading and unloading a cassette tape Use only video cassette tapes marked . Loading Remove the erase prevention tab with a screwdriver. Cover the hole with a piece of adhesive tape. To record again Screwdriver Automatic tape eject This unit will automatically rewind the tape when the tape has ended.
47 Playback (VCR).
48 Playback (VCR) Special playbac k Picture search Reverse picture search function Press REV once or twice during the playbac k. Forward picture search function Press FF once or twice during the playback. To return to playback, press PLAY . Press PAUSE/STILL during playback.
49 Playback (VCR) To star t the pla yback, press PLA Y . The pla yback will be repeated endlessly . Press RETURN to make the menu screen disappear . If you press DISPLA Y , “ ” will appear on the screen 24 . Con venient function To cancel repeat mode : In step 3 above , press or to select “OFF” position.
50 Playback (VCR) Press ZERO RETURN. The tape will rewind and automatically stop at the “00:00:00” position. 5 Zero return function Press DISPLA Y . 1 Before playback or recording, press COUNTER RESET to set the counter to “00:00:00”. 2 Begin playback or recording.
51 Recording (VCR) Press STOP to stop recording. “ ” will appear on screen for about 4 seconds. Note: The pause function will be released after 5 minutes to prevent damage to the tape or the unit.
52 Recording (VCR) One-touch timer recording (OTR) Press once twice 3 times 4 times 5 times NORMAL REC 0:30 1:00 1:30 2:00 3:00 4:00 5:00 6:00 NORMAL REC Recording time Press 6 times 7 times 8 times 9 times 10 times Recording time Load a cassette tape with the erase prevention tab intact.
53 Recording (VCR) T imer recording Timer recording can be progr ammed on-screen with the remote control. The built-in timer allo ws automatic unattended recording of up to 8 programs within 1 month. Timer recor ding Notes: • Press to move cursor backward for correction.
54 Recording (VCR) To set daily/weekly timer The current day (Friday) SUN-SAT (Sunday to Saturday) MON-SAT (Monday to Saturday) MON-FRI (Monday to Friday) WKL-WED WKL-THU (Weekly Thursday) (Weekly Wednesday) One month later minus one day Weekly (e.g. WKL-TUE: each Tuesday) or daily (e.
55 Other functions (VCR) Duplicating a video tape If you connect the unit to another VCR or Camcorder , you can duplicate a previously recorded tape . Make all connections bef ore turning on the power . Duplicating a video tape For duplicating a previously recorded tape from a camcorder, follow the camcorder manufacturer’s instructions.
56 Other functions (VCR) Duplicating a DVD or CD disc Press SPEED to select the desired tape speed SP or SLP . Preparation: • Press TV/VCR to select the TV/VCR mode. • Load a cassette tape with the erase prevention tab intact. • Load a DVD/CD disc.
57 Basic playbac k (D VD) Press OPEN/CLOSE or PLA Y . The disc tra y closes automatically . On the TV -screen, “ ” changes to “Reading Disc” and then playbac k commences. Press ST OP to end playback. 3 Resuming facility • The unit records the stopped point, depending on the disc.
58 Basic playbac k (D VD) To pause playback (still mode) Press PA USE/STILL during playback. To resume normal playbac k, press PLA Y . • The sound is muted during still mode. To stop playback Press STOP . To remove the disc Press OPEN/CLOSE . Remove the disc after the disc tray opens completely .
59 Basic playbac k (D VD) Playing frame by frame Playing in fast reverse or fast forward directions Press REV or FF during playbac k. REV :F ast rev erse playback FF :F ast f orward playbac k Each time you press REV or FF , the playback speed changes.
60 Adv anced playback (D VD) Press / / / to view a different part of the frame. You may move the frame from the center position to UP, DOWN, LEFT or RIGHT direction. In the zoom mode press ZOOM repeatedly to return to a 1:1 view ( Off). Press JUMP during playback or stop mode.
61 Adv anced playbac k (DVD) [Audio CD, Video CD, MP3/WMA/JPEG CD] Press D D D D D to select “Repeat”. Press B B B B B / A A A A A to select “Track” or “All”. The unit automatically star ts repeat playbac k after finishing the current track.
62 Adv anced playback (D VD) Program playback/Random playbac k You can arrange the playback order of tracks or files on the disc. And also the unit selects tracks or files at random and playback them. These feature works for Audio CD and Video CD. ENTER ▲ / ▼ / / PLA Y MODE 0–9 CANCEL Program playback VC D CD Press PLAY MODE in the stop mode.
63 Adv anced playbac k (DVD) Changing angles ANGLE ENTER ▲ / ▼ / / T OP MENU PLA Y DVD MENU Title selection DVD menu Press ANGLE during playback. The current angle will appear. When playing back a disc recorded with multi-angle facility, you can change the angle that you are viewing the scene from.
64 Adv anced playback (D VD) 1 2 Press AUDIO SELECT during playback. The current soundtrack language will appear. Press A UDIO SELECT repeatedly until the desired language is selected.
65 Adv anced playbac k (DVD) Disc status/T o turn of f the PBC With each press of DISPLA Y , the status of the disc will appear on the screen and change as follows. DVD To make status displa y disappear , press DISPLA Y again. Video CD When you playback the CD disc, the status display will appear on the screen and continue displaying.
66 Adv anced playback (D VD) MP3/WMA/JPEG file information Limitations on MP3/WMA/JPEG file playback • MP3/WMA/JPEG file is the disc/card that is standardized b y ISO9660, its file name must include 3-digits extension letters, “mp3”, “wma”, “jpg”.
67 Function playbac k (D VD) Press C C C C C / D D D D D / B B B B B / A A A A A or Number buttons (0–9) to se- lect the desired file. • In case the folder includes more than 15 files, press B B B B B or A A A A A to display next file list.
68 Adv anced playback (D VD) T OP MENU ▲ / ▼ / / ENTER 0–9 The slide show enab les you to view pictures (files) one after another automatically . Preparation: Set “JPEG Inter val” setting to “5 Seconds”, “10 Seconds” or “15 Seconds” .
69 Function setup (D VD) Setting procedure Press SETUP during stop mode. The following on-screen display appears. 1 2 3 To make SETUP screen disappear , press SETUP or RETURN. 5 Customizing the function settings You can change the default settings to customize performance to your preference.
70 Function setup (D VD) Customizing the function settings (continued) Section Option Menu Subtitle A udio TV Screen Display Picture Mode JPEG Interval DRC P ass wor d Parental Select Files Details To select the language of “Menu”, “Subtitle” and “Audio” if more than one language are availab le on the disc.
71 Function setup (D VD) Menu, Subtitle, Audio You can select the language of “Menu”, “Subtitle” and “Audio” if more than one languages are recorded onto the disc. English, Francais, Espanol: The selected language will be heard or seen. Other: Other language can be selected (see the “Language code list” 75 ).
72 Function setup (D VD) Customizing the function settings (continued) Picture Mode There are two types of source content in pictures re- corded in DVD video discs: film content (pictures re- corded from films at 24 frames per second) and video content (video signals recorded at 30 frames per sec- ond).
73 Function setup (D VD) Parental control setting Some discs are specified not suitable for children. Such discs can be limited not to play back with the unit. 1) Press C or D to select “Parental”, then press B or A until the le vel you require appears .
74 Function setup (D VD) Load a DVD disc and press PLAY or OPEN/ CLOSE . If the DVD disc has been designed to temporarily cancel the Rating level, the screen which follows the “Reading Disc” screen will change, depend- ing on which disc is played.
75 Others Language code list Enter the appropriate code number for the initial settings “Menu”, “Subtitle” and/or “Audio” . Abkhazian 1112 Fiji 1620 Lingala 2224 Singhalese 2919 Af ar 1111.
76 Others Most types of television interference can be remedied by adjusting the height and position of the VHF/UHF antenna. Outdoor antennas are recommended for best results.
77 Others Tr oubleshooting Check the following guide for the possible cause of a problem before contacting service. SYMPT OMS CA USE POSSIBLE SOLUTIONS PA G E Tr y another channel. Check picture control adjustments . Check f or source of reception distur- bance.
78 Others The video cassette's erase pre vention tab is broken off . The time is not set correctly . The recording start/end time is not set correctly . The TIMER REC button ha ve not been pressed (the TIMER REC indicator is not lit). T ape is old or wor n.
79 Others Specifications * Screen size is appro ximate. • This model complies with the abov e specifications. • Designs and specifications are subject to change without notice. • This model may not be compatib le with features and/or specifications that ma y be added in the future.
80 T oshiba America Consumer Products, L.L.C. (“T ACP”) mak es the follo wing limited warranties to original con- sumers in the United States. THESE LIMITED W ARRANTIES EXTEND T O THE ORIGINAL CONSUMER PURCHASER OR ANY PERSON RECEIVING THIS TV COMBINA TION AS A GIFT FROM THE ORIGINAL CONSUMER PURCHASER AND T O NO O THER PURCHASER OR TRANSFEREE.
81 Others How to Obtain W arranty Service If, after following all of the operating instructions in this manual and reviewing the section entitled “T roubleshooting, ” you find that service is needed: (1) T o find the nearest T ACP A uthorized Ser vice Station, visit T A CP’ s website at www .
82.
83 Others ................................................................................................................................... .............................................................................................................
Printed in Thailand CableClear , ColorStream and TheaterWide are registered tr ademarks of T oshiba America Consumer Products, L.L.C. GameTimer is a trademark of T oshiba Amer ica Consumer Products, L.
Un punto importante, dopo l’acquisto del dispositivo (o anche prima di acquisto) è quello di leggere il manuale. Dobbiamo farlo per diversi motivi semplici:
Se non hai ancora comprato il Toshiba MW30G71 è un buon momento per familiarizzare con i dati di base del prodotto. Prime consultare le pagine iniziali del manuale d’uso, che si trova al di sopra. Dovresti trovare lì i dati tecnici più importanti del Toshiba MW30G71 - in questo modo è possibile verificare se l’apparecchio soddisfa le tue esigenze. Esplorando le pagine segenti del manuali d’uso Toshiba MW30G71 imparerai tutte le caratteristiche del prodotto e le informazioni sul suo funzionamento. Le informazioni sul Toshiba MW30G71 ti aiuteranno sicuramente a prendere una decisione relativa all’acquisto.
In una situazione in cui hai già il Toshiba MW30G71, ma non hai ancora letto il manuale d’uso, dovresti farlo per le ragioni sopra descritte. Saprai quindi se hai correttamente usato le funzioni disponibili, e se hai commesso errori che possono ridurre la durata di vita del Toshiba MW30G71.
Tuttavia, uno dei ruoli più importanti per l’utente svolti dal manuale d’uso è quello di aiutare a risolvere i problemi con il Toshiba MW30G71. Quasi sempre, ci troverai Troubleshooting, cioè i guasti più frequenti e malfunzionamenti del dispositivo Toshiba MW30G71 insieme con le istruzioni su come risolverli. Anche se non si riesci a risolvere il problema, il manuale d’uso ti mostrerà il percorso di ulteriori procedimenti – il contatto con il centro servizio clienti o il servizio più vicino.
