Manuale d’uso / di manutenzione del prodotto MW27H62 del fabbricante Toshiba
Vai alla pagina of 80
COMBIN A TION FLA T COLOR TELEVISION AND VIDEO C ASSETTE RECORDER / D VD VIDEO PLA YER MW27H62 OWNER’S MANUAL 2 13 19 40 45 49 Introduction Connections Basic setup Playback (VCR) Recording (VCR) Oth.
2 Introduction Dear Customer , T hank you for purchasing this T oshiba TV . T his manual will help you use the many exciting features of your new T V . Befor e operating the TV , please read this manual completely , and keep it nearby for future reference.
3 Introduction IMPOR T ANT SAFEGU ARDS Installation, Car e, and Service Installation Follow these recommendations and precautions and heed all warnings when installing your T V: 16) Never modify this equipment.
4 Introduction IMPOR T ANT SAFEGU ARDS S 25) Always operate this equipment from a 120 V AC, 60 Hz power source only . 26) Always make sure the antenna system is properly grounded to provide adequate protection against voltage surge s and built-up static charge s (see Section 8 10 of the National Electric Code).
5 Introduction SAFETY PRECA UTION/ P o wer source CA UTION: THIS DIGIT AL VIDEO PLA YER EMPLO YS A LASER SYSTEM. TO ENSURE PROPER USE OF THIS PRODUCT , PLEASE READ THIS OWNER'S MANU AL CAREFULL Y AND RET AIN FOR FU- TURE REFERENCE. SHOULD THE UNIT REQUIRE MAINTE- NANCE, CONT A CT AN A UTHORIZED SER VICE LOCA TION.
Introduction 6 Precautions Notes on handling When shipping the unit, the original shipping carton and packing materials come in handy . F or fully protection, repack the unit as it was originally packed at the factory . Do not use volatile liquids , such as insect spray , near the unit.
Introduction 7 Contents Introduction IMPOR T ANT SAFEGU ARDS ........................... 3 SAFETY PRECAUTION ................................... 5 Po w er source ................................................... 5 Precautions .......................
Introduction 8 Structure of disc contents Normally , D VD video discs are divided into titles, and the titles are sub-divided into chapters. Video CDs and A udio CDs are divided into tracks.
Introduction 9 DIGITAL VIDEO Pla yab le discs This unit can play the f ollowing discs . •Y ou cannot pla y discs other than those listed above . •Y ou cannot pla y discs of D VD-RAM, D VD-R OM, Photo CD , etc., or non standardiz ed discs ev en if they may be labeled as abov e.
Introduction 10 Front panel Rear panel AUDIO (L/R)/VIDEO IN (LINE 1 IN) jacks 49 ColorStream (COMPONENT) VIDEO/AUDIO (L/R) IN jacks RF IN (VHF/UHF) jack 13 AC power cord 5 Identification of controls See the page in for details . Please open the door on the front panel to access the *S-VIDEO/AUDIO (L/R)/VIDEO IN (LINE IN 2) jacks.
Introduction 11 Remote control The instructions in this manual describe the function on the remote control. See the page in f or details. *D VD MENU button Use the D VD MENU b utton to displa y the menu included on many D VD video discs. To operate a menu, f ollow the instructions in “DVD menu.
Introduction 12 Operation: • Aim the remote control at the remote sensor and press control buttons to operate. • Operate the remote control within 30 ° angle on either side of the remote sensor , up to a distance of appro x. 5 meters. Replace the compar tment cov er .
13 Connections 75 ohm coaxial cable (not supplied) 300-75 ohm matching transformer (supplied) 300-75 ohm matching transformer (supplied) UHF 300 ohm twin-lead wire (not supplied) VHF 300 ohm twin-lead.
14 Connections For basic cable service not requiring a converter/descrambler box, connect the Cable TV 75 ohm coaxial cable directly to the Antenna jack on the back of the unit.
15 Connections Connecting to optional equipment Before connecting the unit to other equipment, be sure to turn off the pow er and unplug all of the equipment from the wall outlet bef ore making any connections.
16 Connections Connecting to optional equipment (Continued) : Front speaker : Rear speaker : Sub woofer : Center speaker : Signal flow Dolby Digital Dolby Digital is the surround sound technology used in theaters sho wing the latest movies, and is now a vailab le to repro- duce this realistic effect in the home .
17 Connections MPEG2 sound Y ou can enjo y motion picture and live concer t D VD video discs with dynamic realistic sound b y connecting an amplifier equipped with an MPEG2 audio decoder or MPEG2 audio processor .
18 Connections Connecting to a USB Storage Device This unit can be used to read JPEG, WMA, MP3 and DivX ® data f or any memory card reader/writer or digital camera that accepts USB Mass Storage Class. F or de vices that are compatible with the unit’ s USB por t, please refer to page 9 .
19 Basic setup Press PO WER. The starting setup function begins and the Language setup menu appear s on the screen. Press or to select y our desired language, then press ENTER. Starting setup The STARTING SETUP function makes installing your unit easily.
20 Basic setup Clock setting The auto clock function will automatically set the b uilt-in clock (Month, Da y , Y ear and Time) when the unit is connected to an antenna or cab le system and it is turned off.
21 Basic setup Press MENU, then press or to select option. 1 Press or to select “ST AND ARD TIME” , then press . 2 Press or to select your time zone, then press ENTER.
22 Basic setup Manual c lock setting Y ou must set the date and time manually for timer recordings , ON/OFF timer and daylight sa ving time if the auto clock process did not set them correctly . Notes: • After a power f ailure or disconnection of the po wer , the timer settings will be lost.
23 Basic setup Press or to select the desired language: English (ENGLISH), Spanish (ESPAÑOL) or French (FRANCAIS), then press ENTER. 3 Press MENU, then press or to select option.
24 TV operation TV operation Adjust the volume level by pressing VOL + or – . The volume level will be indicated on the screen by green bars. As the volume level increases, so do the number of bars. If the volume decreases, the number of green bars also decreases.
25 TV operation ■ SLEEP To set the unit to turn off after a preset amount of time, press SLEEP on the remote control. The clock will count down 10 minutes f or each press of SLEEP (120, 110, ...10, 0). After the sleep time is progr ammed, the display will appear briefly e very ten minutes to remind y ou that the sleep timer is oper ating.
26 TV operation Closed captions CLOSED CAPTION Closed captions To view c losed captions (analog mode) WHAT IS CLOSED CAPTIONING? This television has the capability to decode and display closed captioned television programs.
27 TV operation To view closed captions (digital mode) CC Adv anced feature (digital mode) MENU ENTER / / / Press or to select “DIGITAL SETUP”, then press . Press or to select “CLOSED CAPTION”, then press . 1 2 3 T une the unit to the desired channel in the digital mode.
28 TV operation Press MENU in the TV mode, then press or to select option. Press or to select “TV/CABLE”. 1 2 Press MENU repeatedly until the menu screen is cleared.
29 TV operation MENU / / / To ADD/ERASE channels (analog mode) To ADD/ERASE channels (digital mode) After you ha ve programmed the channels automatically , y ou can add or erase specific channels man ually . After you ha ve progr ammed the channels automatically , y ou can add or er ase specific channels manually .
30 TV operation Press MENU in the analog mode, then press or to select option. To register passw ord Notes: • If you f orget the passw ord, you cannot set the V -Chip . •T o av oid forgetting the pass word, write it down and keep in the saf e place.
31 TV operation In the V -CHIP menu, press or to select “V -CHIP SET”, then press . Press or to select “MOVIE RATING”. 1 3 Press or to select desired rating, then press ENTER.
32 TV operation To set the on timer This f eature allows you to hav e the unit automatically turn on at a predetermined time. If you progr am the ON TIMER once , the unit will turn on the programmed day (daily/weekly) at the same time to the same channel.
33 TV operation To set the off timer To set the of f timer This f eature allows you to hav e the unit turn off automatically at a predetermined time. If you progr am the OFF TIMER once , the unit will automatically turn off at the same time ev er yday .
34 TV operation 4 Press or to select the desired picture mode, then press ENTER. 3 After your desired setting press MENU repeatedly until the men u screen is cleared. 1 Press MENU, then press or to select option, then press . After your desired setting press MENU repeatedly until the menu screen is c leared.
35 TV operation Selecting the color temperature Change the picture quality by selecting from three preset color temperatures—cool, medium, and warm—as described in the following table: Selecting the color temperature Press MENU, then press or to select option, then press .
36 TV operation PIC SIZE Vi ewing the wide-screen picture formats You can view 480i format programs in a variety of picture sizes—4:3, 16:9, ZOOM. The way the image displays in any of the picture sizes will vary depending on the format of the program you are viewing.
37 TV operation Press MENU and then press or to select option. Sound control adjustment/Setting the StableSound ® / Setting the surround sound Sound controls are factory preset but you can adjust the.
38 TV operation Stereo and Second A udio Program (SAP) The unit is equipped with a feature known as multi-channel TV sound or MTS. MTS broadcasts greatly enhance TV viewing by bringing you programs with high fidelity stereo sound.
39 TV operation Setting the digital setup (digital mode) Selecting the audio language Selecting the digital output format When two or more audio languages are included in a digital signal, you can select one of the audio languages. Press MENU in the digital mode, then press or to select option.
40 Playback (VCR) Loading and unloading a cassette tape Use only video cassette tapes marked . Loading Remove the erase prevention tab with a screwdriver. Cover the hole with a piece of adhesive tape. To record again Screwdriver Automatic tape eject This unit will automatically rewind the tape when the tape has ended.
41 Playback (VCR) Cassette tape playback To play a prerecorded tape. Load a pre-recorded tape: (When loading a cassette tape without the erase prev ention tab , playback will start automatically). 1 Press PLAY on the front panel or on the remote. Playback will start.
42 Playback (VCR) Special playbac k Picture search Reverse picture search function Press REV once or twice during the playbac k. Forward picture search function Press FF once or twice during the playback. To return to playback, press PLAY . Press PAUSE/STILL during playback.
43 Playback (VCR) To star t the playbac k, press PLA Y . The pla yback will be repeated endlessly . Press MENU repeatedly until the menu screen is cleared. If you press DISPLA Y , “ ” will appear on the screen 23 . Con venient function To cancel repeat mode : In step 3 above , press or to select “OFF” position.
44 Playback (VCR) Press ZERO RETURN. The tape will rewind and automatically stop at the “00:00:00” position. 5 Zero return function Press DISPLA Y . 1 Before playback or recording, press COUNTER RESET to set the counter to “00:00:00”. 2 Begin playback or recording.
45 Recording (VCR) Press STOP to stop recording. “ ” will appear on screen for about 4 seconds. Note: The pause function will be released after 5 minutes to prevent damage to the tape or the unit.
46 Recording (VCR) One-touch timer recording (OTR) Press once twice 3 times 4 times 5 times NORMAL REC 0:30 1:00 1:30 2:00 3:00 4:00 5:00 6:00 NORMAL REC Recording time Press 6 times 7 times 8 times 9 times 10 times Recording time Load a cassette tape with the erase prevention tab intact.
47 Recording (VCR) T imer recording Timer recording can be prog rammed on-screen with the remote control. The built-in timer allo ws automatic unattended recording of up to 8 programs within 1 month. Timer recor ding Notes: • Press to move cursor backward for correction.
48 Recording (VCR) To set daily/weekly timer The current day (Friday) SUN-SAT (Sunday to Saturday) MON-SAT (Monday to Saturday) MON-FRI (Monday to Friday) WKL-WED WKL-THU (Weekly Thursday) (Weekly Wednesday) One month later minus one day Weekly (e.g. WKL-TUE: each Tuesday) or daily (e.
49 Other functions (VCR) To A UDIO (R) IN To A UDIO (L) OUT A udio/Video cab le (not supplied) Playbac k VCR To VIDEO OUT To A UDIO (R) OUT Recording VCR Duplicating a video tape If you connect the unit to another VCR or Camcorder , you can duplicate a previously recorded tape .
50 Other functions (VCR) Duplicating a DVD or CD disc Press SPEED to select the desired tape speed SP or SLP . Preparation: • Press TV/VCR to select the TV/VCR mode. • Load a cassette tape with the erase prevention tab intact. • Load a DVD/CD disc.
51 Basic playbac k (D VD) Press OPEN/CLOSE or PLA Y . The disc tra y closes automatically . On the TV -screen, “ ” changes to “Reading” and then playbac k commences. Press ST OP to end playback. 3 Resuming facility • The unit records the stopped point, depending on the disc.
52 Basic playbac k (D VD) To pause playback (still mode) Press PA USE/STILL dur ing pla yback. To resume normal playbac k, press PLA Y . • The sound is muted during still mode. To stop playback Press ST OP . To remove the disc Press OPEN/CLOSE . Remove the disc after the disc tray opens completely .
53 Basic playbac k (D VD) Playing frame by frame Playing in fast reverse or fast forward directions Press REV or FF during playbac k. REV :F ast rev erse pla yback FF :F ast forward pla yback Each time you press REV or FF , the playback speed changes.
54 Adv anced playback (D VD) Press / / / to view a different part of the frame. You may move the frame from the center position to UP, DOWN, LEFT or RIGHT direction. In the zoom mode, press ZOOM repeatedl y to return to a 1:1 view ( Off). Press JUMP during playback or resume stop mode.
55 Adv anced playback (D VD) [Video CD] Press D D D D D to select “Repeat”. Press ENTER to select “Track” or “All”. The unit automatically star ts repeat playbac k after finishing the current track. • If you set the repeat mode during stop mode, press PLA Y to star t Repeat playbac k.
56 Adv anced playback (D VD) Program playback/Random playbac k You can arrange the playback order of tracks or files on the disc. And the unit can also select tracks or files at random and playback them. These feature works for Video CD. F or A udio CD and MP3/WMA CD , please see “Random playbac k (CD/USB)” and “Program playback (CD/USB)” .
57 Adv anced playback (D VD) Changing angles ANGLE ENTER ▲ / ▼ / / T OP MENU PLA Y DVD MENU Title selection DVD menu Press ANGLE during playback. The current angle will appear. When playing back a disc recorded with multi-angle facility, you can change the angle that you are viewing the scene from.
58 Adv anced playback (D VD) 1 2 Press AUDIO SELECT during playback. The current soundtrack language will appear. Press A UDIO SELECT repeatedly until the desired language is selected.
59 Adv anced playback (D VD) Disc status/T o turn off the PBC With each press of DISPLA Y , the status of the disc will appear on the screen and change as f ollows. To cancel the display , press DISPLA Y again. DV D Disc status VCD To turn off the PBC Press / to select “Mode”, then press ENTER to select “Off”.
60 Adv anced playback (D VD) MP3/WMA/JPEG/DivX ® and A udio CD operation This player can playback the MP3/WMA/JPEG/DivX ® -data which has been recorded on CD-R/RW or USB Mass Storage.
61 Adv anced playback (D VD) ENTER ▲ / ▼ / / ST OP PLA Y D VD/USB A file browser screen will appear on the screen. • In case the current directory includes 9 files or more, press or to scroll in the file list. • To see contents in folder, select the folder and then press ENTER .
62 Adv anced playback (D VD) MP3/WMA/JPEG/DivX ® and A udio CD operation (Continued) The slide show enables you to view pictures (files) one after another automatically . Preparation: Set “JPEG Interval” setting to “5 Seconds”, “10 Seconds” or “15 Seconds” .
63 Adv anced playback (D VD) Press C / D to select desired DivX ® file. 1 Press ENTER or PLAY. The selected DivX ® movie will be played back on the screen. Press STOP to end playback. The file browser appears on the screen. If you want to watch the other file, repeat steps 1 ~ 2.
64 Adv anced playback (D VD) Repeat playback (CD/USB) Random playback (CD/USB) In the file browser, press B / A or C / D to select “Repeat” during stop mode. Press ENTER to select “Track” or “All”. Press PLAY. The unit automatically starts repeat playback after finishing the current track.
65 Adv anced playbac k (DVD) Program playback (CD/USB) Folder-1 Folder-2 MP3-1 MP3-2 MP3 3 Repeat :Off Mode :Off Edit Mode Folder-1 Folder-2 MP3-1 MP3-2 MP3-3 WMA-1 WMA 2 JPEG Previe w Repeat :Off Mod.
66 Function setup (D VD) Setting procedure Press SETUP during stop mode. The following on-screen display appears. 1 2 3 Change the selection using C or D , by referring to the corresponding pages 68~70.
67 Function setup (D VD) Section Option Menu Subtitle A udio TV Screen Display Picture Mode JPEG Interval DRC P arental Pass wor d DivX(R) VOD Details To select the language of “Men u”, “Subtitle” and “Audio” if more than one language are available on the disc.
68 Function setup (D VD) Customizing the function settings (Continued) Setting details Menu, Subtitle, Audio You can select the language of “Menu”, “Subtitle” and “Audio” if more than one languages are recorded onto the disc. English, Francais, Espanol: The selected language will be heard or seen.
69 Function setup (D VD) Picture Mode There are two types of source content in pictures re- corded in DVD video discs: film content (pictures re- corded from films at 24 frames per second) and video content (video signals recorded at 30 frames per sec- ond).
70 Function setup (D VD) Note: If each setup (pages 68~70) has completed, the unit can always work under the same condition (especially with DVD discs). Each setup will be retained in the memory even if you turn the power off. If you forget the password.
71 Function setup (D VD) Load a DVD disc and press PLAY or OPEN/ CLOSE on the unit . If the DVD disc has been designed to temporarily cancel the Rating level, the screen which follows the “Reading” screen will change, depending on which disc is played.
72 Others Language code list Enter the appropriate code number for the initial settings “Menu”, “Subtitle” and/or “Audio” . Abkhazian 1112 Fiji 1620 Lingala 2224 Singhalese 2919 Af ar 1111.
73 Others Most types of television interference can be remedied by adjusting the height and position of the VHF/UHF antenna. Outdoor antennas are recommended for best results.
74 Others Tr oubleshooting Check the following guide for the possible cause of a problem before contacting service. SYMPT OMS CA USE POSSIBLE SOLUTIONS PA G E Tr y another channel. Check picture control adjustments . Check f or source of reception distur- bance.
75 Others The video cassette's erase pre vention tab is broken off . The time is not set correctly . The recording start/end time is not set correctly . The TIMER REC button i s not pressed (the TIMER REC indicator is not lit). T ape is old or worn.
76 Others General Power supply Power consumption Operation: Stand by: Picture tube Speaker Audio output power W eight Dimensions Width: Height: Depth: T ele vision system T uner Antenna input Color system Video head Audio track Hi-Fi frequency response Hi-Fi dynamic range F .
77 Others Limited United States W arranty T oshiba America Consumer Products, L.L.C . (“T A CP”) makes the follo wing limited warranties to original consumers in the United States.
78 How to Obtain W arranty Ser vice If , after following all of the oper ating instr uctions in this manual and re viewing the section entitled “T roubleshooting, ” you find that service is needed: (1) T o find the nearest T ACP A uthor ized Service Station, visit T ACP’ s website at www .
79 Others Memo ................................................................................................................................... ........................................................................................................
Printed in Thailand J5V60101A SH 06/02 N ColorStream, FST Pure and StableSound are registered trademar ks of T oshiba Amer ica Consumer Products, L.L.C.
Un punto importante, dopo l’acquisto del dispositivo (o anche prima di acquisto) è quello di leggere il manuale. Dobbiamo farlo per diversi motivi semplici:
Se non hai ancora comprato il Toshiba MW27H62 è un buon momento per familiarizzare con i dati di base del prodotto. Prime consultare le pagine iniziali del manuale d’uso, che si trova al di sopra. Dovresti trovare lì i dati tecnici più importanti del Toshiba MW27H62 - in questo modo è possibile verificare se l’apparecchio soddisfa le tue esigenze. Esplorando le pagine segenti del manuali d’uso Toshiba MW27H62 imparerai tutte le caratteristiche del prodotto e le informazioni sul suo funzionamento. Le informazioni sul Toshiba MW27H62 ti aiuteranno sicuramente a prendere una decisione relativa all’acquisto.
In una situazione in cui hai già il Toshiba MW27H62, ma non hai ancora letto il manuale d’uso, dovresti farlo per le ragioni sopra descritte. Saprai quindi se hai correttamente usato le funzioni disponibili, e se hai commesso errori che possono ridurre la durata di vita del Toshiba MW27H62.
Tuttavia, uno dei ruoli più importanti per l’utente svolti dal manuale d’uso è quello di aiutare a risolvere i problemi con il Toshiba MW27H62. Quasi sempre, ci troverai Troubleshooting, cioè i guasti più frequenti e malfunzionamenti del dispositivo Toshiba MW27H62 insieme con le istruzioni su come risolverli. Anche se non si riesci a risolvere il problema, il manuale d’uso ti mostrerà il percorso di ulteriori procedimenti – il contatto con il centro servizio clienti o il servizio più vicino.
