Manuale d’uso / di manutenzione del prodotto D-VR5SU del fabbricante Toshiba
Vai alla pagina of 92
Hi-F i VCR & D VD VIDEO RECORDER D-VR5SU OWNER’S MANUAL 2 24 34 49 53 63 Introduction V arious settings Disc playback T ape pla yback Recording Editing the disc ©2006 T oshiba Corporation 78 82 Dubbing Additional information This device does not tape-record cop y protected D VD Video Discs .
Introduction 2 W ARNING: TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, do not expose this appliance to rain or moisture. CA UTION: TO PREVENT ELECTRIC SHOCK DO NO T USE THIS POLARIZED PLUG WITH AN EXTENSION CORD , RECEPT A CLE OR O THER OUTLET UNLESS THE BLADES CAN BE FULL Y INSERTED T O PREVENT BLADE EXPOSURE.
Introduction 3 1. READ INSTRUCTIONS All the saf ety and operating instructions should be read before the unit is oper ated. 2. RET AIN INSTRUCTIONS The saf ety and operating instructions should be retained for future ref erence. 3. HEED W ARNINGS All warnings on the unit and in the operating instructions should be adhered to .
Introduction 4 IMPOR T ANT SAFEGU ARDS 13. LIGHTNING To protect your unit from a lightning storm, or when it is left unattended and unused f or long periods of time, unplug it from the wall outlet and disconnect the antenna or cab le system. This will pre vent damage to the unit due to lightning and pow er line surges.
Introduction 5 CONDENSA TION Moisture will f or m in the operating section of the D VD/VCR if the unit is brought from cool surroundings into a warm room or if the temperature of the room rises suddenly . When this happens , the D VD/VCR’ s perf or mance will be impaired.
Introduction 6 Introduction • SAFTY PRECA UTIONS ...................................... 2 • IMPORT ANT SAFEGU ARDS .............................. 3 • Contents ............................................................. 6 • Features .........
Introduction 7 • Editing an original title .................................... 70 Adding a chapter mark .................................... 70 Combining chapters ......................................... 71 Changing an original title name ........
Introduction 8 Features Pla yback function Title menu Video CD/SVCD/MP3/WMA/JPEG/DivX ® playbac k Video CD/SVCD/MP3/WMA/DivX ® files can be pla yed back. Also, y ou can displa y JPEG files on the TV screen and enjo y them as a slide show . Progressive scan This unit suppor ts the progressiv e scanning system.
Introduction 9 Disc Handling discs Removing the Disc from its case Be sure to hold the disc by its edges. Do not touch the surface of the disc. Ta ke the disc carefully from its case. • Do not scratch the disc. • Do not get dirt on the surface of the disc.
Introduction 10 Disc D VD-R •Y ou can record on the disc only in the Video mode. •Y ou can record until the disc becomes full. • Finalizing the discs allows playback on other DVD play ers. Howe ver , the finalized discs can no longer be recorded.
Introduction 11 Disc CHAPTER 1 TITLE1 TITLE2 DVD DISC CHAPTER 2 CHAPTER 2 CHAPTER 3 CHAPTER 1 TRACK 1 TRACK 2 TRACK 3 TRACK 4 TRACK 5 Audio-CD When recording in the Video mode When a disc recorded in the Video mode is finalized, it cannot be recorded onto any more .
Introduction 12 Pa r ts and functions Rear Front ON/ST ANDBY b utton EJECT button DV IN ter minal PLA Y button ST OP button FWD (Fast Forward) button REW (Rewind) button REC button VCR/DVD button Disc.
Introduction 13 No . Displa y Description Lights during video tape playbac k. 1 Pa r ts and functions NOTE: Some discs ma y not playbac k correctly , or chapter number , playbac k time, etc ma y not be displayed. Displa y window Video tape is temporarily stopped.
Introduction 14 OPEN/CLOSE Opens or Closes the tra y . 34 EJECT Ejects the cassette tapes 49 PROG Activates the prog ressive scanning mode. 21 HDMI HDMI output on/off.
Introduction 15 Inserting Batteries into the Remote Control: Pa r ts and functions 3 Replace the compar tment cov er. 2 Install two “AAA” batteries, pa y- ing attention to the polarity dia- gr am in the batter y compart- ment. 1 Open the batter y compartment cov er in the direction of the ar- row .
Introduction 16 NO TES: • A clear picture will not be obtained by the D VD/VCR unless the antenna signal is good. Connect the antenna to the D VD/VCR properly . • F or better quality recording, an indoor antenna or a telescopic antenna is not recommended.
Introduction 17 NO TE: If a UHF or VHF antenna is used, set the TV/CABLE menu option to the “TV” mode. TV with single 75 ohm UHF/VHF antenna input NO TE: If a UHF or VHF antenna is used, set the TV/CABLE menu option to the “TV” mode.
Introduction 18 Many cab le companies off er ser vices permitting reception of extra channels including pa y or subscription chan- nels. This D VD/VCR has an extended tuning range and can be tuned to most cab le channels without using a cable company supplied con verter box, e xcept for those channels which are intentionally scr amb led.
Introduction 19 IMPORT ANT : Make sure the TV/CABLE menu option is set to the “CABLE” mode . This D VD/VCR cannot receive scr ambled programs since it does not contain a descr ambler . In order to receive scrambled programs , your e xisting descramb ler must be used.
Introduction 20 Connections with the TV or audio component The e xact arrangement you use to interconnect v ar ious video and audio components to the D VD/VCR is dependent on the model and f eatures of each component. Check the Owner’ s Manual provided with each component f or the location of video and audio inputs and outputs.
Introduction 21 Connect to a TV with HDMI output HDMI stands f or High Definition Multimedia Interface . HDMI transfers digital audio and uncompressed digital video on a single cable . As a result, audio cables and video cables don’t need to be connected separ ately to a device .
Introduction 22 Connections with the TV or audio component Connect to a stereo amplifier with audio output Y ou can enjoy high quality audio b y connecting the audio output to your amplifier . Connect the audio output jacks to an y line-le vel inputs (such as A UX, D VD , CD , etc.
23 Introduction A uto cloc k setting / Setting the video channel NO TES: • When shipped from factory , the video channel is set to CH 3. • If the unit does not operate prop- erly , or there is no key operation from the unit and/or the remote control: Static electricity , etc.
V arious settings 24 SETUP MENU The SETUP MENU consists of several menus where y ou can make v arious settings concerning lan- guage, audio functions, and images. In addition, this menu inc ludes a cloc k, channel and other things that require setting just after purc hase.
25 V arious settings Setting the language Y ou can choose the language of the menu screen, D VD menu, DVD audio and subtitles. Preparation: • T ur n ON the TV and set it to the video input mode. • Select “LANGU AGE” from “SYSTEM SETUP” . Fo r the procedure, see steps 1 to 3 in “Using the SETUP MENU” on page 24.
V arious settings 26 Setting the parental contr ol Some discs are specified as not suitable f or chil- dren. This unit can prevent pla yback of such discs. Preparation: • T ur n ON the TV and set it to the video input mode. • Select “ P ARENT AL ” from “ SYSTEM SETUP ”.
27 V arious settings Setting the c loc k The cloc k is set to the correct time automatically , b ut it can also be set man ually . The c lock can be set f or da ylight saving time and time zone. Preparation: •T ur n ON the TV and set it to the video input mode.
V arious settings 28 Setting the disc TIMER REC SET SYSTEM SETUP AV SETUP REC SETUP CH SETUP O THER DISC SETUP REFORMA T AS DVD VIDEO REFORMA T AS DVD VR NEW DISC FORMA T FINALIZE PRO TECT DISC UNDO F.
29 V arious settings Setting the disc / Other (SYSTEM SETUP) UNDO FINALIZE Y ou can cancel the finalization of a finalized D VD-R W (in VR mode). Y ou cannot cancel the finalization for discs other than abov e. Y ou can record or edit on a disc whose finaliza- tion has been canceled.
V arious settings 30 Setting the screen Note for the field still and frame still: (with 480i interlaced scanning mode) • Field* still (240 lines) Since only one field (half of the video inf or mation) is shown on the TV screen, the picture appears rough b ut does not shak e.
31 V arious settings This section describes image quality settings. Preparation: • T ur n ON the TV and set it to the video input mode. • Select “ AV SETUP 2 ” in “ AV SETUP ”. For the procedure, see steps 1 to 3 in “Using the SETUP MENU” on page 24.
V arious settings 32 Setting the audio / Setting the recor ding SAP (Second A udio Pr ogram) This unit is fitted with an SAP broadcast system that enables you to switch to a second audio program while viewing a selected channel. This function applies only when the program is broad- cast in multiple languages through the SAP broadcast system.
33 V arious settings Setting the channel / Setting other items This D VD/VCR is equipped with a channel memory feature that allows y ou to skip channels up or down to the next channel set in memory , hence skip over unwanted channels. Before selecting channels, they m ust be pro- grammed into the D VD/VCR’ s memory .
Disc playbac k 34 Pla ybac k pr ocedure Preparation: •T ur n ON the TV and set to the video input mode. • Press D VD to select the D VD mode. (The D VD indicator will light.) NO TE: It is impossible to s witch to the VCR mode while D VD is play ed back.
Disc playback 35 Pla ybac k b y selecting a title When playing bac k a recorded disc, you can displa y the title menu and select the title to be played bac k. Preparation: •T ur n ON the TV and set to the video input mode. • Load a recorded D VD .
Disc playbac k 36 Checking media information DISC NAME ---- MEDIA TYPE DVD VIDEO TITLE ORIGINAL35 REMAINING TIME ---- /SP DISC PROTECT NO FINALIZED YES Finalize Disc protect Remaining time* Title Media type Disc name V arious information on the loaded disc can be displayed on the TV screen.
Disc playback 37 Special pla ybac k NOTE: There may be a slight de- lay between pressing the b utton and the function activation. F ast f orward pla yback Press SEARCH during normal playback. Each press of SEARCH will increase the speed of the search (x2), (x12), (x24), (x100).
Disc playbac k 38 Instant skip / Locating a specific scene Instant skip Use this function to skip commercials while y ou playback. Press INST ANT SKIP during playback. The time jumps to a point appro x. 30 seconds later and playbac k re- sumes. NO TE: With some D VD-Video , the Commercial skip operation ma y not work.
Disc playback 39 Repeat pla ybac k A B A 1 Press A-B REPEA T during play- back. The star t point is selected. 2 Press A-B REPEA T again. The end point is selected. Playbac k star ts at the point that you selected. Pla yback stops at the end point, returns to point A automatically , then star ts again.
Disc playbac k 40 Title selection / D VD menu NOTES: • Depending on the DVD, you may not be able to select the title, and a “title menu” may simply be called a “menu” or “title” in the instructions supplied with the disc.
Disc playback 41 Audio 1/2 V o . OFF Dolby Digital Karaoke pla yback Y ou can tur n the vocal on or off recorded on the D VD KARAOKE. During D VD KARAOKE disc pla yback, press A UDIO repeatedly until the desired setting is selected. Vo. ON : The primary vocal is output when it is recorded on the disc.
Disc playback 42 Changing soundtrac k langua ge / Subtitles / T o turn off the PBC (VIDEO CD V er sion 2.0) Audio 1/8 ENG Dolb y Digital Audio 2/8 FRA Dolb y Digital Subtitle OFF Subtitle 1/32 ENG Changing soundtrack language Y ou can select the language when you pla y a multilingual disc.
Disc playback 43 V arious operations on CD Preparation: •T ur n ON the TV and set to the video input mode. • Load the music CD or Video CD . • Press DV D to select the D VD mode. (The D VD indicator will light.) Press T OP MENU/TITLE MENU . The TRACK INFO screen will appear .
Disc playback 44 V arious operations on CD NOTE: When recording on a CD-R/CD-R W in the MP3 or WMA modes, “RAN- DOM PLA Y” and “TIME SEARCH” will not appear in the menu list. Random playback 1 Press or to select “RANDOM PLA Y” from the menu list and press ENTER .
Disc playback 45 MP3/WMA/JPEG/DivX ® playback MP3 and WMA files can be played back. Y ou can also display JPEG/ DivX ® files on the TV screen and enjoy them. Some discs may not pla y due to the condition of the recording. Limitations on MP3/WMA/ JPEG/DivX ® CD playback: •M P3/WMA/JPEG/DivX ® CD is a disc that is standardized by ISO9660.
Disc playback 46 MP3/WMA/JPEG/DivX ® playback MP3 CD • MP3 files must have the extension letters “.mp3”. • Standard, sampling frequency , and the bit rate: MPEG-1 A udio 32kHz, 44.1kHz, 48kHz 32kbps to 320kbps (constant bit rate or variable bit rate) • The recommend recording setting for a high quality sound is 44.
Disc playback 47 MP3/WMA/JPEG/DivX ® playback Playing bac k JPEG files 1 Press or to select JPEG file. • In case the disc includes more than 10 files, you can turn to the next or the pre vious page. (See page 43.) 2 Carr y out either of the item a or b below .
Disc playbac k 48 1 Press or to select DivX ® file. • If the disc includes more than 10 files, you can move to the next or previous page . (See page 43.) 2 Carry out the item a or b listed below . a : Press ENTER . b : Press and then press or to select “PLA Y” and press ENTER .
T ape playback 49 T ape speed and maximum recor ding time Loading and unloading a cassette tape Use only video cassette tapes marked and . • Cassettes marked “VHS” (or “S-VHS”) can be used with this video cassette recorder Howe v er , S-VHS recording is not possible with this model.
T ape playbac k 50 Cassette tape pla ybac k NO TES: • This VCR selects the playback tape speed SP , LP or SLP auto- matically . • It is impossible to s witch to the VCR mode during DVD playback. Preparation: •T ur n ON the TV and set to the video input mode.
T ape playback 51 Special pla ybac k Picture sear ch Rev erse picture search function Press REW x 1 or x 2 during the playbac k. F orw ard picture search function Press F .FWD x 1 or x 2 during the playbac k. To retur n to pla yback: Press PLA Y . Still picture Press PA USE during playback.
T ape playbac k 52 ZER O RETURN function / Video index sear ch system 8 : 47 AM MON 00 : 04 : 38 SP HI-FI 8 : 47 AM MON 00 : 00 : 00 SP HI-FI CH 001 INDEX or is displayed +3 INDEX NO. (up to 9) 1 Press DISPLA Y . The counter displa y shows the tape running time during playbac k or recording.
Recording 53 Read this bef ore recor ding on disc T ypes of disc Y ou can use D VD-RAM, D VD-RW and D VD-R discs to record video. D VD-RAM/-R W (VR mode) • This mode inv olv es mutiple editing functions. •V arious editing options using a created Playlist.
Recording 54 Read this bef ore recor ding on disc Images that cannot be recorded Some D VD-Video and broadcasts contain copy-restriction signals to protect cop yrights. There are 3 types of cop y-restriction signals: “Copy F ree”, “Copy Ne ver” and “Cop y Once”.
Recording 55 Recor ding a TV pr ogram Preparation: •T ur n ON the TV and set it to the video input mode. • Load a recordable D VD or video tape into the unit. • Press DVD or VCR to select the appropriate mode. 1 Press REC MODE/SPEED to select the re- cording mode.
Recording 56 Recording a TV program To stop recording Press ST OP to stop recording. “ ” will appear on the screen for about 4 seconds. NO TE: When recording onto a D VD , ev en if STOP is pressed during record- ing, recording does not stop instantly .
Recording 57 One-touch Timer Recor ding (O TR) The One-touch Timer Recording f eature pr ovides a simple and con- venient way to make a timed re- cording. 00 : 00 : 00 SP SP DVD mode VCR mode CH 110 CH 110 OTR 0 : 30 OTR 0 : 30 VCR mode DVD mode Preparation: •T ur n ON the TV and set to the video input mode.
Recording 58 Timer recor ding The timer recording system allows you to select the date, time and channel and record the desired pro- grams. Up to 12 timer programs within a month can be stored in this unit. Setting timer recording Preparation: •T ur n ON the TV and set to the video input mode.
Recording 59 Timer recor ding 4 Press or to select “TYPE” and press ENTER . Press or to select “ONCE” from the list and press ENTER . 5 Press or to select “D A TE” and press ENTER . Press or to select the date to be recorded from the list and press ENTER .
Recording 60 8 : 00 11 : 00 9 : 00 10 : 00 Program 1 Prog.1 Deleted Parts Non Recorded Portion Parts Prog.2 Prog.3 Program 2 Program 3 Recording Control Settings Timer recor ding NO TES: • Recording starts a few seconds be- fore the preset starting time.
Recording 61 Chase Playback Still playbac k: Press PA USE . •T o resume chase pla ybac k, press PLA Y . F ast f orward/Review pla yback: Press SEARCH 8/9 . Ever y press SEARCH , it s witches the speed of the search. •T o resume chase pla ybac k, press PLA Y .
Recording 62 Stereo recording and playback The VHS Hi-Fi audio system per- mits high fidelity recording of MTS STEREO TV broadcasts. STEREO OUTPUT SELECTION STEREO L ch R ch MONO SOUND HEARD ON BO TH .
Editing the disc 63 Editing the disc This section explains ho w to edit the recorded contents on D VD- R Ws. However , the items that y ou can edit vary with the recor ding f ormats. In VR mode, y ou can edit v arious title menus, whereas in Video mode, y ou can edit only a fe w items.
Editing the disc 64 Preparation: • T ur n ON the TV and set to the video input mode. • Load the recorded D VD-RAM/R W (VR). • Press DV D to select the D VD mode. (The D VD indicator will light.) Creating a playlist 1 Press TITLE MENU . The title menu will appear .
Editing the disc 65 Editing a pla ylist NO TES: • The title name can be a maximum of 64 characters. Long names will be shor tened in the title menu. • F or using the ke yboard screen, see “Changing a disc name” (page 76). Changing a title name 1 Press TITLE MENU to display the title men u.
Editing the disc 66 Editing a pla ylist SELECT ENTER RETURN ENTER BA CK END TITLE MENU EDIT TITLE 00:08:28 00:00:00 00:00:00 Preview SET ST ART SET END Finish NAME F amily CHAPTER 1/3 LENGTH 00:08:28/00:30:17 Erasing a scene (Edit title) Y ou can erase an unnecessar y scene from the created pla ylist.
Editing the disc 67 Editing a playlist NO TE: It is no problem to omit the proce- dures f or confir ming the scene or adjusting star t and end points. 6 Press or to select “SET END” at the end point of the scene y ou w ant to erase and press ENTER .
Editing the disc 68 Editing a pla ylist Combining the title Y ou can create a pla ylist by combining the se veral original titles or pla ylists. To combine the titles, it is necessary to create a playlist at first. By combining the titles in the pla ylist, a playlist where se veral titles are combined is created.
Editing the disc 69 Editing a pla ylist Erasing a playlist Y ou can erase the created playlist. Even if y ou erase the pla ylist, the original title will not be erased. 1 Press TITLE MENU to display the title menu. 2 Select the pla ylist that you w ant to erase.
Editing the disc 70 Editing an original title In VR mode , you can edit various items, whereas in Video mode , you can only edit the title names. NO TES: •Y ou can automatically add a chap- ter mark in recording. For more in- fo r mation, see page 32.
Editing the disc 71 Editing an original title 5 When the scene you want to add a chapter mark, press ENTER . The pla yback is paused and the position of the added chapter mark appears green.
Editing the disc 72 4 Press SKIP 7 7 7 7 7 or SKIP 6 6 6 6 6 to select the chapter marks to be erased. 5 Press ENTER . The chapter marks are erased and 2 chapters are combined into 1 chapter . 6 To continue erasing the chapter marks, repeat steps 4 and 5 .
Editing the disc 73 Editing an original title NO TES: • If the scene is erased from the original title, the created pla ylist is erased. • Disc space will only be freed up if scenes lasting se veral min utes are deleted. •A chapter mark is automatically added at the location of the erased scene.
Editing the disc 74 Editing an original title NO TE: If the original title is erased the cre- ated pla ylist is also erased. Erasing an original title Y ou can erase an original title. Erasing the title deletes both the title and the recording sav ed under that title name.
Editing the disc 75 Changing a disc name Y ou can change a disc name from the title menu. Preparation: •T ur n ON the TV and set to the video input mode. • Load the recorded D VD disc. • Press DV D to select the D VD mode. (The D VD indicator will light.
Editing the disc 76 Changing a disc name Character input 2 Example: Explained here is the procedure when you input “F” and “J”. 1 Press the numeric keys continuously and select the character to be input.
Editing the disc 77 Changing a disc name Erasing a character Y ou can erase the input character . Erasing method 1 1 Press , , or to select “Back”. 2 Press ENTER . The last input character will be erased. 3 To erase the char acters continuously , press ENTER repeatedly .
Dubbing 78 Preparation: •T ur n ON the TV and set to the video input mode. • Load a source video tape and a disc f or recording. • Remov e the erase protection tab of the source video tape to pre vent the data from accidentally being erased. • Confirm the disc space before operation.
Dubbing 79 Preparation: •T ur n ON the TV and set to the video input mode. • Load a source disc and a video tape f or recording. • Confirm the remaining tape for recording bef ore operation. • Press PROG/HDMI repeatedly to turn OFF HDMI mode. 1 Press VCR to set this unit to VCR mode.
Dubbing 80 Dubbing using other equipment Y ou can connect another VCR or camcorder to dubbing. T ypical connection: When using this unit as a recording de vice Y ou can also connect to the audio/video input jack (L1) at the rear side of this unit.
Dubbing 81 Dubbing using other equipment Y ou can connect a D V format digital video camera to the D V IN terminal to record fr om it. To D V IN DV cord (not supplied) Recording VCR Playbac k Digital Video Camera To D V OUT Preparation: • T ur n ON the TV and set to the video input mode.
Additional information 82 Glossary A-B Repeat Playbac k Pla yback that repeats between tw o set points, A and B. angle Recorded onto some D VD discs are scenes which hav e been simultaneously shot from a n umber of dif- f erent angles (the same scene is shot from the front, from the left side, from the right side, etc.
Additional information 83 Glossary parental control settings Le vel 1: Adult discs and general discs (R-rated discs included) cannot be pla yed back. Le vel 2 to 3: Adult discs and R-rated discs cannot be play ed back. Le vel 4 to 7: Adult discs cannot be pla yed back.
Additional information 84 Enter the appropriate code number for the initial settings “D VD MENU”, “A UDIO” and/or “SUBTITLE” (see page 25).
Additional information 85 SYMPT OMS POSSIBLE SOLUTIONS • Make sure the po wer cord is plugged in. •T ry another AC outlet. •P ow er is off, chec k fuse or circuit breaker . • Unplug unit, then plug it back in. • Select the D VD or VCR mode before operating.
Additional information 86 21 30 29 29 31 – 26 25 25, 42 – – Pr oblems and tr oubleshooting / Video head cleaning Video head c leaning Video head clog ging The video heads are the means by which the D VD/VCR reads the picture from the tape during playbac k.
Additional information 87 Err or/W arning message list NOTE: Any error/w ar ning message other than those abov e might appear . T ake measures against such a mes- sage by seeing the possib le solutions abov e. Check the disc space. Load a recordable disc.
88 GENERAL Power supply: Power consumption: W eight: Dimensions: Operating temperature: Operating humidity: Inputs/Outputs: Video: Audio: Antenna: VCR section Video head: Audio track: T uner: RF channel output: F .
Additional information 89 Limited United States W arranty Digital A udio Video ("DA V") Pr oduct - Depot Repair Warranty T oshiba America Consumer Products, L.L.C . ("T ACP") mak es the follo wing limited warranties to original consumers in the United States.
90 How to Obtain Warranty Services If , after follo wing all of the operating instructions in this manual and chec king the section "T roubleshooting," y ou find that service is needed: (1) .
Additional information 91 Memo ................................................................................................................................... ........................................................................................
Printed in Thailand 2J40101A P88-BACK 3/4/06, 10:46 AM 92.
Un punto importante, dopo l’acquisto del dispositivo (o anche prima di acquisto) è quello di leggere il manuale. Dobbiamo farlo per diversi motivi semplici:
Se non hai ancora comprato il Toshiba D-VR5SU è un buon momento per familiarizzare con i dati di base del prodotto. Prime consultare le pagine iniziali del manuale d’uso, che si trova al di sopra. Dovresti trovare lì i dati tecnici più importanti del Toshiba D-VR5SU - in questo modo è possibile verificare se l’apparecchio soddisfa le tue esigenze. Esplorando le pagine segenti del manuali d’uso Toshiba D-VR5SU imparerai tutte le caratteristiche del prodotto e le informazioni sul suo funzionamento. Le informazioni sul Toshiba D-VR5SU ti aiuteranno sicuramente a prendere una decisione relativa all’acquisto.
In una situazione in cui hai già il Toshiba D-VR5SU, ma non hai ancora letto il manuale d’uso, dovresti farlo per le ragioni sopra descritte. Saprai quindi se hai correttamente usato le funzioni disponibili, e se hai commesso errori che possono ridurre la durata di vita del Toshiba D-VR5SU.
Tuttavia, uno dei ruoli più importanti per l’utente svolti dal manuale d’uso è quello di aiutare a risolvere i problemi con il Toshiba D-VR5SU. Quasi sempre, ci troverai Troubleshooting, cioè i guasti più frequenti e malfunzionamenti del dispositivo Toshiba D-VR5SU insieme con le istruzioni su come risolverli. Anche se non si riesci a risolvere il problema, il manuale d’uso ti mostrerà il percorso di ulteriori procedimenti – il contatto con il centro servizio clienti o il servizio più vicino.
