Manuale d’uso / di manutenzione del prodotto B-450-R del fabbricante Toshiba
Vai alla pagina of 20
PRINTED IN JAPAN TOSHIBA Barcode Printer B-450-R SERIES Document No. E O 18-33021 Original Jun., 2008 (Revised ) Maintenance Manual.
EO18-33021 CAUTION! 1. This manual may not be copied in whole or in part without prior written perm ission of TOSHIBA TEC. 2. The contents of this manual may be changed without notification. Copyright © 2008 by TOSHIBA TEC CORPORATION A ll Rights Reserved 570 Ohito, Izunokuni-shi, Shi zuoka-ken, JAPAN TABLE OF CONTENTS Page 1.
1. UNPACKING EO18-33021 1.1 PROCEDURE 1- 1 1. UNPACKING 1.1 PROCEDURE 1) Open the carton. 2) Unpack the side pad (R) and cushions and the printer from the carton. 3) Place the printer on a level surface. 1.2 CHECKS Check for damage or scratches on the printer.
2. MAJOUR UNIT REPLACEMENT EO18-33021 2.1. REPLACING THE CPU PC BOARD 2- 1 2. MAJOR UNIT REPLACEMENT WARNING! Disconnect power cord before replacing important parts. Lubrication CAUTION: 1) Lubrication: During parts replacement. 2) Kinds of oil: 1Kg can.
2. MAJOUR UNIT REPLACEMENT EO18-33021 2.1. REPLACING THE CPU PC BOARD 2- 2 4) Remove the PT-3x10 screw and detach the Side Cover R from the printer. 5) Disconnect the seven harnesses from CN1, CN2, CN5, CN8 to CN10, and CN500 on the CPU PC Board. 6) Remove the T-3x10 screw and the Ground Wire to detach the CPU PC Board.
2. MAJOUR UNIT REPLACEMENT EO18-33021 2.1. REPLACING THE CPU PC BOARD 2- 3 7) Release the two Hooks securing the Printer Unit. 8) Detach the Printer Unit from the Bottom Cover.
2. MAJOUR UNIT REPLACEMENT EO18-33021 2.1. REPLACING THE CPU PC BOARD 2- 4 9) Remove the four screws (T-3x10 and SMW-3x6) a nd detach the CPU PC Board Ass’y from the Printer Block. 10) Remove the four screws (S MW-3x6 and P-3x6) and detach the CP U PC Board from the PC Board Attached Plate.
2. MAJOUR UNIT REPLACEMENT EO18-33021 2.2. REPLACING THE MOTOR 2- 5 2.2 REPLACING THE MOTOR 2.2.1 Ribbon Motor 1) Remove the CPU PC Board Ass’y. (Refer to Section 2-1) 2) Remove the two PT-3x10 screws and harnesses to detach the Ribbon Motor Attaching Plate.
2. MAJOUR UNIT REPLACEMENT EO18-33021 2.2. REPLACING THE MOTOR 2- 6 2.2.2 Stepping Motor WARNING! Be careful not to get burned when handling the stepping motor since it becomes very hot while printing. 1) Remove the CPU PC Board A ss’y. (Refer to Section 2.
2. MAJOUR UNIT REPLACEMENT EO18-33021 2.3. REPLACING THE PS UNIT 2- 7 2.3 REPLACING THE PS UNIT WARNING! Replace only with the same type and rated of fuse for continued protection against risk of fire. 1) Remove the Top Cover and Side Co ver L. (Refer to Section 2.
2. MAJOUR UNIT REPLACEMENT EO18-33021 2.3. REPLACING THE PS UNIT 2- 8 4) Release the two Hooks securing the Printer Unit. 5) Detach the Printer Unit from the Bottom Cover.
2. MAJOUR UNIT REPLACEMENT EO18-33021 2.3. REPLACING THE PS UNIT 2- 9 6) Detach the PS Unit from the Bottom Cover. 7) Replace the PS Unit as an assembly, then, reasse mble in the reverse order of steps 1) to 6). To replace the Fan Motor, Power Harness, Inlet Ass’ y, PSU Cover, etc.
2. MAJOUR UNIT REPLACEMENT EO18-33021 2.3. REPLACING THE PS UNIT 2- 10 10) Push both sides of the Power Switch with something like pliers and remove it from the frame of the PS Unit. Disconnect the Inlet Ass’y from CN1 on the PS Unit. 11) Remove the SMW-3x4 screw to detach the F an Motor Attachment Plate from the PS Unit.
2. MAJOUR UNIT REPLACEMENT EO18-33021 2.4. REPLACING THE PRINT HEAD 2- 11 2.4 REPLACING THE PRINT HEAD CAUTION: 1. NEVER touch the element when handling the print head. 2. NEVER touch the connecto r pins Touching them may cause a static electric discharge which will damage the print head.
2. MAJOUR UNIT REPLACEMENT EO18-33021 2.5. REPLACING THE MEDIA SENSOR 2- 12 2.5 REPLACING THE MEDIA SENSOR 2.5.1 Replacing the Sensor PCB (TR) 1) Push down the Head Release Lever R to open t he Print Head Block. (Refer to Section 2.4) 2) Remove the Sensor Holder fr om the Sensor Holder Arm.
2. MAJOUR UNIT REPLACEMENT EO18-33021 2.5. REPLACING THE MEDIA SENSOR 2- 13 5) Disconnect the harness from the Sensor PCB (TR), and remove the Sensor PCB (TR) from the Sensor Holder by releasing the two Rivets. 6) Replace the Sensor PCB (TR) with a new one, and then reassemble in the reverse order of removal.
2. MAJOUR UNIT REPLACEMENT EO18-33021 2.5. REPLACING THE MEDIA SENSOR 2- 14 2.5.2 Replacing the Sensor PCB (LED) 1) Open the Top Cover. 2) Remove the two PT-3x10 screws to detach the Side Cover L. 3) Disconnect KEY/LED Harness from c onnector CN13 on the CPU PC Board.
2. MAJOUR UNIT REPLACEMENT EO18-33021 2.5. REPLACING THE MEDIA SENSOR 2- 15 Printer Unit 5) Disconnect the Power Harness and Fan Motor Harness from CN8 and CN10 on the CPU PC Board.
2. MAJOUR UNIT REPLACEMENT EO18-33021 2.5. REPLACING THE MEDIA SENSOR 2- 16 7) Detach the Printer Unit from the Bottom Cover. 8) Disconnect the har ness from the Sensor PCB (LED) whic h is attached to the bottom of the Printer Unit. Then remove the Rivet to detach the Sens or PCB (LED) from the Printer Unit.
3. TROUBLESHOOTI NG EO18-33021 3. TROUBLESHOOTING 3- 1 3. TROUBLESHOOTING Problems Cause Solution Power is not turned ON. 1. Input voltage to the printer is not within the rated voltage. 2. Output voltage from the printer is not within the rated voltage.
Un punto importante, dopo l’acquisto del dispositivo (o anche prima di acquisto) è quello di leggere il manuale. Dobbiamo farlo per diversi motivi semplici:
Se non hai ancora comprato il Toshiba B-450-R è un buon momento per familiarizzare con i dati di base del prodotto. Prime consultare le pagine iniziali del manuale d’uso, che si trova al di sopra. Dovresti trovare lì i dati tecnici più importanti del Toshiba B-450-R - in questo modo è possibile verificare se l’apparecchio soddisfa le tue esigenze. Esplorando le pagine segenti del manuali d’uso Toshiba B-450-R imparerai tutte le caratteristiche del prodotto e le informazioni sul suo funzionamento. Le informazioni sul Toshiba B-450-R ti aiuteranno sicuramente a prendere una decisione relativa all’acquisto.
In una situazione in cui hai già il Toshiba B-450-R, ma non hai ancora letto il manuale d’uso, dovresti farlo per le ragioni sopra descritte. Saprai quindi se hai correttamente usato le funzioni disponibili, e se hai commesso errori che possono ridurre la durata di vita del Toshiba B-450-R.
Tuttavia, uno dei ruoli più importanti per l’utente svolti dal manuale d’uso è quello di aiutare a risolvere i problemi con il Toshiba B-450-R. Quasi sempre, ci troverai Troubleshooting, cioè i guasti più frequenti e malfunzionamenti del dispositivo Toshiba B-450-R insieme con le istruzioni su come risolverli. Anche se non si riesci a risolvere il problema, il manuale d’uso ti mostrerà il percorso di ulteriori procedimenti – il contatto con il centro servizio clienti o il servizio più vicino.
