Manuale d’uso / di manutenzione del prodotto (T)XM6401B/F1 del fabbricante Toshiba
Vai alla pagina of 35
CD-R OM DRIVE (T)XM6401B/F1 HARD W ARE INSTR UCTION MANU A L VERSION 2.0 APRIL 2000 Covers.p65 6/13/00, 2:58 PM 1.
TOSHIBA XM-6401B/TXM6401F1 CD-ROM Drive i CD-R OM DRIVE Hardware Instruction Manual For the follo wing CD-R OM Driv es: XM-6401B TXM6401F1 TOSHIBA AMERICA ELECTRONIC COMPONENTS, INC. Storage Device Division 35 Hammond Irvine, CA 92618 Contents of this manual are subject to change without prior notice.
ii TOSHIBA XM-6401B/TXM6401F1 CD-ROM Drive FCC DECLARATION OF CONFORMITY CD-External Enclosure: TXM6401F1 Certification Date: 11/9/98 Toshiba America Electronic Components, Inc. - SDD 35 Hammond, Irvine, CA 92618 This equipment has been tested and found to comply with the limits for a class B digital device, pursuant to part 15 of the FCC Rules.
TOSHIBA XM-6401B/TXM6401F1 CD-ROM Drive iii LASER CAUTION This appliance contains a laser system and is classified as a "CLASS 1 LASER PRODUCT". To use this model properly, read this Owner's Manual carefully and keep this manual for future reference.
TOSHIBA XM-6401B/TXM6401F1 CD-ROM Drive v T able of Contents Introduction ............................................................................. 1 SCSI drives ............................................................................ 2 Installing CD-ROM .
TOSHIBA XM-6401B/TXM6401F1 CD-ROM Drive 1 Intr oduction C ongratulations on the purchase of your T oshiba XM-6401B CD-R OM driv e. This manual will provide you with the information you will need to install and operate your new CD-R OM. This manual cov ers both the internal CD-R OM (XM-6401B) and the external CD-R OM (TXM6401F1).
2 TOSHIBA XM-6401B/TXM6401F1 CD-ROM Drive SCSI DRIVES T he XM-6401B is a SCSI-2 (Small Computer Systems Inter- face) device. Some other SCSI devices you may already have connected to your computer are scanners, tape drives, or an- other CD-R OM dri ve.
TOSHIBA XM-6401B/TXM6401F1 CD-ROM Drive 3 Installing CD-R OM B efore you begin to install your CD-R OM, make sure you hav e the items listed below . In most cases, these items will not come with your CD-R OM. See your local computer re- tailer to purchase them.
4 TOSHIBA XM-6401B/TXM6401F1 CD-ROM Drive IMPOR T ANT NO TE Before you begin installing your CD-ROM, make sure your computer is switched OFF and the power cable is disconnected. CD-ROM JUMPER SETTINGS In order for your CD-R OM to work properly , it may be necessary for you to change the CD-R OM’ s jumper settings.
TOSHIBA XM-6401B/TXM6401F1 CD-ROM Drive 5 All SCSI devices attached to your computer are assigned a SCSI-ID number from 0 to 7. Y our CD-R OM’ s SCSI ID must be set so that its ID number does not conflict with any other de vice’ s SCSI-ID in your system.
6 TOSHIBA XM-6401B/TXM6401F1 CD-ROM Drive T erminator ON/OFF J umper This jumper turns termination power ON or OFF . If you are “daisy- chaining” a series of SCSI devices (connecting more than one SCSI de vice to your system), and the XM-6401B CD-R OM is not at the end of the chain , you must remo ve the jumper .
TOSHIBA XM-6401B/TXM6401F1 CD-ROM Drive 7 PLA CING CD-R OM INSIDE YOUR COMPUTER You are no w ready to install your CD-R OM inside your computer . Y ou should refer to the book that came with your computer , as com- puter casings are different from each other .
8 TOSHIBA XM-6401B/TXM6401F1 CD-ROM Drive CABLING SCSI - The internal SCSI interface cable is connected to your SCSI host adapter card and fits into the socket on the back of your CD- R OM.
TOSHIBA XM-6401B/TXM6401F1 CD-ROM Drive 9 If there is no po wer cable in your system, contact your computer dealer . Y ou may need a “power splitter lead” (a Y shaped cable which taps two power outputs from one input).
10 TOSHIBA XM-6401B/TXM6401F1 CD-ROM Drive CD-ROM DRIVE Host Computer I/F Card Terminator SCSI Cable CD-ROM DRIVE Host Computer I/F Card Terminator SCSI Cable Interface Connector External Terminator (.
TOSHIBA XM-6401B/TXM6401F1 CD-ROM Drive 1 1 COMPLETING INST ALLA TION After you have connected all the necessary cables, you can push the CD-R OM completely into the slot. There are 12 scr ew holes on the XM-6401B that are used to mount the CD-R OM into your computer .
12 TOSHIBA XM-6401B/TXM6401F1 CD-ROM Drive INST ALLING AN EXTERN AL CD-R OM (TXM6401F1) The instructions that follow ar e for use on PC and Macintosh systems. In order to install your external CD-R OM successfully , you will need to complete the following steps.
TOSHIBA XM-6401B/TXM6401F1 CD-ROM Drive 1 3 SCSI ID Switch TERMINA TION If the CD-R OM is being installed as the last dri ve in a daisy-chain or as the only SCSI device, you must install an external terminator on one of the SCSI connectors at the rear of the CD-R OM.
14 TOSHIBA XM-6401B/TXM6401F1 CD-ROM Drive CABLING SCSI - Locate the SCSI interface card connection or SCSI port at the back of your computer . Plug the SCSI cable into socket, making sure it f its snugly . (If the plug has fixing scr ews or c lips, use them to ensur e the connector is firmly fixed.
TOSHIBA XM-6401B/TXM6401F1 CD-ROM Drive 1 5 SOFTW ARE In order for your computer to recognize the CD-R OM, you must in- stall a CD-R OM software dri ver . PCs - If you do not have this software, contact the manufacturer of your SCSI host adapter card.
16 TOSHIBA XM-6401B/TXM6401F1 CD-ROM Drive Using y our CD-R OM THE CONTR OLS The XM-6401B/TXM6401F1 CD-R OM driv es hav e the follo wing controls and features: ➬ CD Loading T ray ➬ EJECT Button .
TOSHIBA XM-6401B/TXM6401F1 CD-ROM Drive 1 7 THE FR ONT P ANEL Eject Button - The EJECT button is used to open the disc tray so you can install or remove a disc. The EJECT Inhibit Jumper must be set to OFF in order for the EJECT button to function. (If jumper is in ON postion, the drive accepts all eject contr ol fr om the computer).
18 TOSHIBA XM-6401B/TXM6401F1 CD-ROM Drive THE BA CK PANEL The pictures below show the back panel of the XM-6401B and TXM6401F1 CD-R OM dri ves. Descriptions of features are as fol- lows: XM-6401B Back P anel TXM6401F1 Back P anel Audio Out Connector - Outputs analog signal on the XM-6401B only .
TOSHIBA XM-6401B/TXM6401F1 CD-ROM Drive 1 9 SCSI Connector(s) - Connects CD-R OM to computer . The TXM6201F1 has two SCSI connectors. P o wer Connector - Connects CD-R OM to power source (either po wer adapter or power cable from computer). P o wer Switch - T urns power ON and OFF on the TXM6401F1.
20 TOSHIBA XM-6401B/TXM6401F1 CD-ROM Drive OPERA TING THE CD LO ADING TRA Y T o open the CD loading tra y , just press the EJECT button. After in- serting or removing a disc, press the EJECT button again or gently push on the open disc tray , the tray will automatically close.
TOSHIBA XM-6401B/TXM6401F1 CD-ROM Drive 2 1 EMERGENCY EJECT CA UTION! The following procedure is intended only as a last resort when pressing the eject button f ails to open the CD tr ay . 1. T urn CD-R OM driv e po wer OFF . 2. Insert a solid bar (i.
22 TOSHIBA XM-6401B/TXM6401F1 CD-ROM Drive Specif ications T he following describes the specifications of the XM-6401B CD-ROM. (Specifications are subject to change without notice.
TOSHIBA XM-6401B/TXM6401F1 CD-ROM Drive 2 3 ■ Access Time • Average Random Access Time 3 : 80 msec typ. (40X mode) • Average Random Seek Time 4 : 75 msec typ. (40X mode) • Average Full Stroke Access Time 5 : 135 msec typ. (40X mode) 2 6-14X rotational speed is fixed for CD-audio (Red-Book) format.
24 TOSHIBA XM-6401B/TXM6401F1 CD-ROM Drive ■ Audio Output • Analog output (.90 Vrms typ. at load impedance 10K Ω min.) • Headphone output terminal: 3.
TOSHIBA XM-6401B/TXM6401F1 CD-ROM Drive 2 5 5.5" (139.7 mm) 3.1" (79.2mm) 1.9" (47.4mm) 0.5" (11.8mm) 7.6" (193mm) Power Connector (4P) TOP (HORIZONTAL POSITION) BOTTOM Analog Audio Out Connector (3P) Mode Select Headers 4-M3 (TAP) SCSI Connector 3.
26 TOSHIBA XM-6401B/TXM6401F1 CD-ROM Drive T echnical Support S hould you require technical support, contact your local distributor . If your distributor is unable to answer your ques tions, hav e them call T oshiba Storage Device Di vision T echni- cal Support, on your behalf.
TOSHIBA XM-6401B/TXM6401F1 CD-ROM Drive 2 7 Repair Center S hould your CD-ROM require maintenance, contact Toshiba SDD's Repair Center. In order to return your CD-ROM a Return Authorization Number (RA#) must be obtained from Toshiba's SDD Repair Center (do not send drives without an autho- rized RA number).
28 TOSHIBA XM-6401B/TXM6401F1 CD-ROM Drive W arranty T oshiba America Electronic Components, Inc. ( “ TAEC ” ) warrants that all products will, upon delivery by TAEC to the customer in new condition, be free from defects in material and workmanship for a period of twelve (12) months after delivery.
TOSHIBA XM-6401B/TXM6401F1 CD-ROM Drive 2 9 Force Majeure: Non-performance by Buyer or Seller shall be excused to the extent that performance is rendered impossible by war, fire, flood, earthquakes, l.
470063-B0 P/N 470073-B0 Covers.p65 6/13/00, 2:58 PM 2.
Un punto importante, dopo l’acquisto del dispositivo (o anche prima di acquisto) è quello di leggere il manuale. Dobbiamo farlo per diversi motivi semplici:
Se non hai ancora comprato il Toshiba (T)XM6401B/F1 è un buon momento per familiarizzare con i dati di base del prodotto. Prime consultare le pagine iniziali del manuale d’uso, che si trova al di sopra. Dovresti trovare lì i dati tecnici più importanti del Toshiba (T)XM6401B/F1 - in questo modo è possibile verificare se l’apparecchio soddisfa le tue esigenze. Esplorando le pagine segenti del manuali d’uso Toshiba (T)XM6401B/F1 imparerai tutte le caratteristiche del prodotto e le informazioni sul suo funzionamento. Le informazioni sul Toshiba (T)XM6401B/F1 ti aiuteranno sicuramente a prendere una decisione relativa all’acquisto.
In una situazione in cui hai già il Toshiba (T)XM6401B/F1, ma non hai ancora letto il manuale d’uso, dovresti farlo per le ragioni sopra descritte. Saprai quindi se hai correttamente usato le funzioni disponibili, e se hai commesso errori che possono ridurre la durata di vita del Toshiba (T)XM6401B/F1.
Tuttavia, uno dei ruoli più importanti per l’utente svolti dal manuale d’uso è quello di aiutare a risolvere i problemi con il Toshiba (T)XM6401B/F1. Quasi sempre, ci troverai Troubleshooting, cioè i guasti più frequenti e malfunzionamenti del dispositivo Toshiba (T)XM6401B/F1 insieme con le istruzioni su come risolverli. Anche se non si riesci a risolvere il problema, il manuale d’uso ti mostrerà il percorso di ulteriori procedimenti – il contatto con il centro servizio clienti o il servizio più vicino.
