Manuale d’uso / di manutenzione del prodotto D-5.5E del fabbricante Toa
Vai alla pagina of 20
Toa Electric C o . , Ltd. Model D-5.5, D-5.5E ELECTRONIC MUSIC MIXER Operating Instruction Manual KOBE, JAPAN.
Contents General Description ......................................... 2 Features .................................................. 3 · 4 Front Panel: Names o f components & their usage (D-5.5) ....... 5 ~ 9 Rea r Panel: Names o f components & their usage (D-5.
General Description The TOA D-5.5 is a 1 9 " rackmount or console configuration, eight-input stereo mixer especially designed for electronic music and sound. It is expandable to a 32-input mixing system, with group, stereo and mono outputs, and 1 6 MI DI-T HRU jacks, when combined with two D-5.
System Features: Each Input Channel Feature: 8×4×2×1 configuration: 8 inputs; 4 su b groups; stereo L & R; mono sum. Expandable to 3 2 inputs with two 1 2 input D-5.
Features Stereo L & R Features: Sum Connections: 2-color L ED indicator for signal presence (green) and clip (red). Channel on/off switch with L ED indicator (orange). Writing block. 6 0 mm fader. Cue switch. REAR PANEL: Other Connections: L & R C ue input: 1/4" phone jacks.
Front Panel (D-5.5) INPUT CHANNEL (D-5.5) Phono EQ (RIAA) IN/OUT Switch (RIAA IN/OUT) Thi s switch is available for input channels 7 and 8 only and is active when a turntable with magnetic type cartrige i s connected to the Phono input channel. Th e switch is a "push-in push-out" type.
The D-5.5 incorporates two, switchable MIDI inputs and four MID I THRU outputs . With the D-5.5E, s ix additional M ID I TH RU outputs ar e available. MIDI LED Indicator (MIDI I N) This yellow LED indicates the presence of MID I data a t t he MI DI input jack on the rear panel (MIDI I N) .
Front Panel (D-5.5) OUTPUT CHANNEL Level C ontrol f or Re turn to Group (RE T T O GROUP, LEVEL) Th is control adjusts the level of signal f ro m th e AU X 1 return and AUX 2 return, o r the EF F return and RE V return.
Front Panel ( D - 5 . 5 ) Writing Bl ock Th e name o f the source signal can be written in with an erasable fe lt pen or grease pencil. Group Fader (GROUP 1 - 4) Th e 6 0mm fader provides continuously variable adjustment o f the group level to th e stereo L an d R busses, and the gro up out put connectors.
Level Control f or Effect an d Reverb Return to Aux 1 (REV/EFF TO AUX, LEVEL AUX 1 ) Th is control governs the amount of reverb signal (built-in or outboard) returned through the reverb return jack ( RE V RET), and effect signal returned through t he effect return jac k (EF F RET) to AU X 1 mixin g bus s.
RCA Stereo L & R Post Accessory Patch Points (POST IN/OUT) These RCA pin jacks ar e unba- lanced, with a nominal level o f — 10dB. Input jack impedance is 10 k ohms, and o utput jack impe- dance is 1k ohms. The Accessory jacks allow signal processing and effect devices to be inserted into the signal path.
Front Panel (D-5.5E) * Th e na me s o f the functions o n the D -5.5E are specified below a s fu n ction o f the input channel on the D-5 .5 is th e same as the D-5.5E. Difference i n functions are explained. Power LED indicator and Switch (POWER) Th e power sw itch alternately turns AC power t o the D-5.
AC Power Cor d (6 ft.) Pushbutton Circuit Breaker (1A) (PUSH RESET) Th is breaker i s designed to protect the D-5.5E in the event o f internal or external fault. Wait about two mi- nutes after co rrecting the fault and push t he button to reset the system a nd restore proper operation.
Block Diagrams D-5.5 B LO C K DIAGRAM D-5.5E B LO CK DIAGRAM — 15 —.
D-5.5 LEVEL DIAGRAM Level Diagrams D-5.5E LEVEL D I AGRAM — 16 —.
D-5.5E ONLY St er eo phone jack is wired : Ti p=Left, Ring=Right a nd S leave=Common. All X LR ty pe connectors a re electronically balanced. The XLR type connectors are wired as follows Pin No.l-Ground, Pin No.2-Cold (Low), P in No.3-Hot (Hig h) OUTPUT SPECIFICATIONS (D-5.
Rack Mounting Instructions The D-5.5 and D-5.5E are designed fo r either console or rack-mount use, using a pair o f brackets (included). T h e following procedure should be observed for the rack-mount use. 1 . Remove both side panels and armrest unscrewing and removing 6 screws.
Procedure f o r Changing Internal Switch Setting NOTE: T h e internal s w itches have b ee n provided for added versatility when using th e D -5.5 an d D-5.
* Dimensions wit h brackets D-5.5E * Dimensions wi th brackets Appearance D-5.5 FREQUENCY RESPONSE INPUT EQ CHARACTERISTICS Characteristics Diagrams FREQUENCY FREQUENCY LEVEL LEVEL — 20 —.
Toa Electric Co., Ltd. K O B E , JAPAN Printed i n J apa n 133-02-748-80.
Un punto importante, dopo l’acquisto del dispositivo (o anche prima di acquisto) è quello di leggere il manuale. Dobbiamo farlo per diversi motivi semplici:
Se non hai ancora comprato il Toa D-5.5E è un buon momento per familiarizzare con i dati di base del prodotto. Prime consultare le pagine iniziali del manuale d’uso, che si trova al di sopra. Dovresti trovare lì i dati tecnici più importanti del Toa D-5.5E - in questo modo è possibile verificare se l’apparecchio soddisfa le tue esigenze. Esplorando le pagine segenti del manuali d’uso Toa D-5.5E imparerai tutte le caratteristiche del prodotto e le informazioni sul suo funzionamento. Le informazioni sul Toa D-5.5E ti aiuteranno sicuramente a prendere una decisione relativa all’acquisto.
In una situazione in cui hai già il Toa D-5.5E, ma non hai ancora letto il manuale d’uso, dovresti farlo per le ragioni sopra descritte. Saprai quindi se hai correttamente usato le funzioni disponibili, e se hai commesso errori che possono ridurre la durata di vita del Toa D-5.5E.
Tuttavia, uno dei ruoli più importanti per l’utente svolti dal manuale d’uso è quello di aiutare a risolvere i problemi con il Toa D-5.5E. Quasi sempre, ci troverai Troubleshooting, cioè i guasti più frequenti e malfunzionamenti del dispositivo Toa D-5.5E insieme con le istruzioni su come risolverli. Anche se non si riesci a risolvere il problema, il manuale d’uso ti mostrerà il percorso di ulteriori procedimenti – il contatto con il centro servizio clienti o il servizio più vicino.
