Manuale d’uso / di manutenzione del prodotto CD-X9 del fabbricante Teac
Vai alla pagina of 24
9A10303900 Z Micr o Hi-Fi System OWNER’S MANUAL CD - X9.
2 IMPOR T ANT SAFETY INSTRUCTIONS 1) Read these instructions. 2) Keep these instructions. 3) Heed all warnings. 4) Follow all instructions. 5) Do not use this apparatus near water. 6) Clean only with dry cloth. 7) Do not block any ventilation openings.
3 This product has been designed and manufactured according to FDA regulations “title 21, CFR, chapter 1, subchapter J, based on the Radiation Control for Health and Safety Act of 1968“, and is classified as class 1 laser product.
4 Contents Thank you for choosing TEAC. Read this manual carefully to get the best performance from this unit. Important Safety Instructions . . . . . . . . . . . . . . . . . . . . . . . . . . 2 Contents. . . . . . . . . . . . . . . . . . . . . . . . .
5 Discs MP3 compatibility < File names of MP3 should be alphanumeric characters. This unit cannot display symbols and full-size or 2 bytes-wide characters (such as Japanese, Chinese, etc.) correctly. Also, be sure to use the file extension “.mp3”.
6 Connection AM loop antenna Position the antenna for the best sound. If you want, you can hook the AM antenna on a wall as shown below: A CAUTION < Turn off the power of all the equipment before making connections. < Read instructions of each component you intend to use with this unit.
7 W all Mounting You can mount the main unit and/or the left and right speakers on a wall. Precautions < Be aware that the length of the cables are approximately 3 m. Do not attempt to mount the main unit and the speakers too far from the subwoofer.
8 Remote Sensor When operating the remote control unit, point it towards here. VOLUME Press the up “+” or the down “–” button to adjust the volume. MEMORY/TIME SET In CD mode, use this button to program tracks. In TUNER mode, use this button to store preset channels into memory.
9 SKIP ( . / / ) / TUNING In CD mode, momentarily press this button to skip tracks. Hold down this button to search for a part of a track. In TUNER mode, momentarily press this button to tune in stations. In Standby mode, these buttons are used to set or adjust the clock and the timer.
10 Basic Operation 2 1 3 4 Select a source by pressing the FUNCTION button. 3 Play the source and adjust the volume using the VOLUME buttons. 4 Muting To mute the sound temporarily, press the MUTING button. Press the MUTING button again to restore the sound.
11 Listening to CD/MP3 (1) 1 5 4 2 3 Press the FUNCTION button to select “CD”. 1 Press the OPEN/CLOSE button. 2 Put a disc onto the center spindle of the player with the label side facing you. Press the disc onto the spindle until a slight “click” is heard indicating the disc is mounted correctly.
12 MP3 Listening to CD/MP3 (2) T o suspend playback temporarily (pause mode) T o stop playback Press the Stop button ( H ) to stop playback. T o skip to the next or a previous track Press the Play/Pause button ( G / J ) during playback. Playback stops at the current position.
13 Search Mode (MP3 only) Search for a track in a folder Press the MP3 button twice. The name of folder is displayed. Press the SKIP button ( . or / ) to find the folder that the track you want to listen to is included. Press and hold the SKIP button ( .
14 MEMORY FUNCTION Up to 64 tracks can be programmed in the desired order. Shuffle function doesn’t work during programmed playback. Press the FUNCTION button to select “CD”. 1 Press the MEMORY button. 2 “MEMORY” lights up in the display. < To cancel the program mode, press the Stop button ( H ).
15 T o check the programmed or der In the stop mode, press the MEMORY button repeatedly. The track number and program number will be shown on the display. T o add a track to the end of the program In the stop mode, press the MEMORY button repeatedly until “00” appears on the display.
16 Shuffle Playback The tracks can be played randomly. Press the SHUFFLE button during playback or when in the stop mode. “SHUFFLE” will then light up in the display. < If you press the / button during shuffle playback, next track will be randomly selected and played.
17 Listening to the Radio 3 2 1 Press the FUNCTION button to select “TUNER”. 1 Press the FM/AM button to select a band. 2 Select the station you want to listen to (auto selection). 3 Hold down the TUNING Up or Down button until the frequency display begins to change.
18 Preset T uning You can store FM and AM stations into preset channels 1 to 10 respectively. If the power switch of the subwoofer turned off, the settings kept in memory (clock, preset stations, timer setting) will be erased. Tune in a station you want to listen to (see steps to of page 17).
19 Setting the Clock If the power switch of the subwoofer turned off, the settings kept in memory (clock, preset stations, timer setting) will be erased. If the unit is on, press the STANDBY/ON switch to turn it standby 1 Press the TIME SET button once more.
20 Setting the Timer < The unit can be programmed to turn on and off at a specified time. < Adjust the clock before setting the timer. Press and hold the TIMER button until “TIMER” and “ON” indicators appear on the display. 1 The “hour” value starts flashing.
21 Press the SKIP button ( . / / ) to select a source (CD or TUNER), and then press the TIMER button. 6 Press the SKIP button ( . / / ) to set the volume, and then press the TIMER button. 7 The clock and the TIMER indicator are displayed. The unit will turn on and off at the specified time every day.
22 If you have problems with your system, look through this chart and see if you can solve the problem yourself before calling your dealer or TEAC service center. General No power e Check the connection to the AC power supply. Check and make sure the AC source is not a switched outlet and that, if it is, the switch is turned on.
23 Specifications AMPLIFIER section Output Power (L+R) . . . . . . . . . . . . . . . . . . . . . . . 5 W + 5 W Output Power (Subwoofer) . . . . . . . . . . . . . . . . . . . . . . 15 W Input Sensitivity . . . . . . . . . . . . . . . . . . . . . . . . .
0605 . MA-0984A Z This appliance has a serial number located on the rear panel. Please record the model number and serial number and retain them for your records. Model number Serial number TEAC CORPORATION 3-7-3, Nakacho, Musashino-shi, Tokyo 180-8550, Japan Phone: (0422) 52-5081 TEAC AMERICA, INC.
Un punto importante, dopo l’acquisto del dispositivo (o anche prima di acquisto) è quello di leggere il manuale. Dobbiamo farlo per diversi motivi semplici:
Se non hai ancora comprato il Teac CD-X9 è un buon momento per familiarizzare con i dati di base del prodotto. Prime consultare le pagine iniziali del manuale d’uso, che si trova al di sopra. Dovresti trovare lì i dati tecnici più importanti del Teac CD-X9 - in questo modo è possibile verificare se l’apparecchio soddisfa le tue esigenze. Esplorando le pagine segenti del manuali d’uso Teac CD-X9 imparerai tutte le caratteristiche del prodotto e le informazioni sul suo funzionamento. Le informazioni sul Teac CD-X9 ti aiuteranno sicuramente a prendere una decisione relativa all’acquisto.
In una situazione in cui hai già il Teac CD-X9, ma non hai ancora letto il manuale d’uso, dovresti farlo per le ragioni sopra descritte. Saprai quindi se hai correttamente usato le funzioni disponibili, e se hai commesso errori che possono ridurre la durata di vita del Teac CD-X9.
Tuttavia, uno dei ruoli più importanti per l’utente svolti dal manuale d’uso è quello di aiutare a risolvere i problemi con il Teac CD-X9. Quasi sempre, ci troverai Troubleshooting, cioè i guasti più frequenti e malfunzionamenti del dispositivo Teac CD-X9 insieme con le istruzioni su come risolverli. Anche se non si riesci a risolvere il problema, il manuale d’uso ti mostrerà il percorso di ulteriori procedimenti – il contatto con il centro servizio clienti o il servizio più vicino.
