Manuale d’uso / di manutenzione del prodotto AOC-CTG-i2S del fabbricante Supermicro
Vai alla pagina of 19
User's Guide Revision 1.0 AOC-CTG-i2S.
User's Guide Revision 1.0 Release Date: September 21, 2012 Unless you request and receive written permission from Super Micro Computer , Inc., you may not copy any part of this document. Information in this document is subject to change without notice.
Preface About this User's Guide This user's guide is written for system integrators, PC technicians and knowledgeable PC users. It provides information for the installation and use of the AOC-CTG-i2S add-on card.
iv AOC-CTG-i2S Add-on Card User's Guide Conventions Used in the User's Guide Pay special attention to the following symbols for proper system installation and to prevent damage to the system.
v Preface Contacting Supermicro Headquarters Address: Super Micro Computer , Inc. 980 Rock Ave. San Jose, CA 95131 U.S.A. T el: +1 (408) 503-8000 Fax: +1 (408) 503-8008 Email: marketing@supermicro.com (General Information) support@supermicro.com (T echnical Support) Website: www .
T able of Contents Preface Chapter 1 Overview 1-1 Overview ......................................................................................................... 1-1 1-2 Key Features .................................................................
Chapter 1: Overview 1-1 Chapter 1 Overview 1-1 Overview Congratulations on purchasing your add-on card from an acknowledged leader in the industry . Supermicro products are designed with the utmost attention to detail to provide you with the highest standards in quality and performance.
1-2 AOC-CTG-i2S Add-on Card User's Guide • PCI-E 2.0 x8 (5GT/s) • Load balancing on multiple CPUs • iSCSI remote boot support • Fibre Channel over Ethernet (FCoE) support •.
Chapter 1: Overview 1-3 • Simple Network Management Protocol (SNMP) and Remote Network Monitoring (RMON) statistics counters • iSCSI remote boot OS Support • Windows ® 7, 8, Server 200.
1-4 AOC-CTG-i2S Add-on Card User's Guide (2) - 2U Bracket Note1: This add-on card (AOC-CTG-i2S) is not recommended for 12-node MicroCloud systems. Note2: This product is only available to Supermicro OEM customers and is sold as an integrated solution with Supermicro server systems.
Chapter 2: Hardware Components 2-1 Intel 82599ES 10GbE Controller Chapter 2 Hardware Components 2-1 Add-On Card Image and Layout The AOC-CTG-i2S Layout 1 2-2 Major Components The following major components are installed on the AOC-CTG-i2S: 1. Intel 82599ES 10GbE Controller 2.
2-2 AOC-CTG-i2S Add-on Card User's Guide 2-3 Connectors and LEDs SFP+ Ports T wo SFP+ 10GbE adapter ports are located on the add-on card. Connect a DAC T win Axial cable or an LC Fiber- Optic SR cable to the ports to provide Gigabit Ethernet communication.
3-1 Chapter 3: Installation Chapter 3 Installation 3-1 Static-Sensitive Devices Electrostatic Discharge (ESD) can damage electronic com ponents. T o avoid dam - aging your add-on card, it is important to handle it very carefully . The following measures are generally sufcient to protect your equipment from ESD.
3-2 AOC-CTG-i2S Add-on Card User's Guide Removing/Installing the IO Bracket Refer to the illustration at right for the following instructions on removing/installing the I/O bracket. T o remove the I/O bracket : Loosen and remove the I/O bracket screw , then gently pull the bracket away from the add-on card.
3-3 Chapter 3: Installation 3-3 Before Installation T o install the add-on card properly , be sure to follow the instructions below . 1. Power down the system.
3-4 AOC-CTG-i2S Add-on Card User's Guide Note : If the FOUND NEW HARDWARE WIZARD screen displays on your system, click CANCEL. 3. Click on INST ALL DRIVERS AND SOFTW ARE. 4. Follow the prompts to complete the installation. 3-6 Installing the Linux Operating System Follow the steps below to install the driver to a Linux system.
3-5 Chapter 3: Installation 3-7 Building the Driver Manually Follow the instructions below to build the driver manually . 1. Move the base driver tar le to the directory of your choice. For example /home/username/ixgbe or /usr/local/src/ixgbe 2. Untar/unzip archive, where <x.
3-6 AOC-CTG-i2S Add-on Card User's Guide For 2.6 kernels, the insmod command can be used if the full path to the driver module is specied. For example: insmod /lib/modules/<KERNEL VERSION>/kernel/drivers/net/ ixgbe/ixgbe.ko In addition, when using 2.
(Disclaimer Continued) The products sold by Supermicro are not intended for and will not be used in life support systems, medical equipment, nuclear facilities or systems, aircraft, aircraft devices, .
Un punto importante, dopo l’acquisto del dispositivo (o anche prima di acquisto) è quello di leggere il manuale. Dobbiamo farlo per diversi motivi semplici:
Se non hai ancora comprato il Supermicro AOC-CTG-i2S è un buon momento per familiarizzare con i dati di base del prodotto. Prime consultare le pagine iniziali del manuale d’uso, che si trova al di sopra. Dovresti trovare lì i dati tecnici più importanti del Supermicro AOC-CTG-i2S - in questo modo è possibile verificare se l’apparecchio soddisfa le tue esigenze. Esplorando le pagine segenti del manuali d’uso Supermicro AOC-CTG-i2S imparerai tutte le caratteristiche del prodotto e le informazioni sul suo funzionamento. Le informazioni sul Supermicro AOC-CTG-i2S ti aiuteranno sicuramente a prendere una decisione relativa all’acquisto.
In una situazione in cui hai già il Supermicro AOC-CTG-i2S, ma non hai ancora letto il manuale d’uso, dovresti farlo per le ragioni sopra descritte. Saprai quindi se hai correttamente usato le funzioni disponibili, e se hai commesso errori che possono ridurre la durata di vita del Supermicro AOC-CTG-i2S.
Tuttavia, uno dei ruoli più importanti per l’utente svolti dal manuale d’uso è quello di aiutare a risolvere i problemi con il Supermicro AOC-CTG-i2S. Quasi sempre, ci troverai Troubleshooting, cioè i guasti più frequenti e malfunzionamenti del dispositivo Supermicro AOC-CTG-i2S insieme con le istruzioni su come risolverli. Anche se non si riesci a risolvere il problema, il manuale d’uso ti mostrerà il percorso di ulteriori procedimenti – il contatto con il centro servizio clienti o il servizio più vicino.
