Manuale d’uso / di manutenzione del prodotto R9002327 del fabbricante Barco
Vai alla pagina of 55
BARCO PROJECTION SYSTEMS BARCO PROJECTION SYSTEMS INSTALLATION MANUAL INSTALLATION MANUAL Date: 200498 Date: 200498 Rev. : 02 Rev. : 02 Art. No. R5975069A Art.
Due to constant research, the information in this manual is subject to change without notice. Produced by BARCO NV, April 1998. All rights reserved. Trademarks are the rights of their respective owners.
TABLE OF CONTENTS TABLE OF CONTENTS i-I TABLE OF CONTENTS i-I TABLE OF CONTENTS 5975069A BARCOVISION 708 200498 5975069A BARCOVISION 708 200498 WARNINGS . .. . .. . .. . . ...............................................................................
SAFETY INSTRUCTIONS SAFETY INSTRUCTIONS SAFETY INSTRUCTIONS 1-1 SAFETY INSTRUCTIONS 1-1 5975069A BARCOVISION 708 200498 5975069A BARCOVISION 708 200498 WARNINGS SAFETY INSTRUCTIONS on safety on instal.
SAFETY INSTRUCTIONS SAFETY INSTRUCTIONS 1-2 1-2 SAFETY INSTRUCTIONS SAFETY INSTRUCTIONS 5975069A BARCOVISION 708 200498 5975069A BARCOVISION 708 200498 Notice on Safety This equipment is built in accordance with the requirements of the international safety standards EN60950, UL 1950 and CSA C22.
SAFETY INSTRUCTIONS SAFETY INSTRUCTIONS SAFETY INSTRUCTIONS 1-3 SAFETY INSTRUCTIONS 1-3 5975069A BARCOVISION 708 200498 5975069A BARCOVISION 708 200498 The lightning flash with an arrowhead within a triangle is intended to tell the user that parts inside this product may cause a risk of electrical shock to persons.
SAFETY INSTRUCTIONS SAFETY INSTRUCTIONS 1-4 1-4 SAFETY INSTRUCTIONS SAFETY INSTRUCTIONS 5975069A BARCOVISION 708 200498 5975069A BARCOVISION 708 200498 * All the safety and operating instructions should be read before using this unit. * The safety and operating instructions manual should be retained for future reference.
SAFETY INSTRUCTIONS SAFETY INSTRUCTIONS SAFETY INSTRUCTIONS 1-5 SAFETY INSTRUCTIONS 1-5 5975069A BARCOVISION 708 200498 5975069A BARCOVISION 708 200498 3 . Do not allow anything to rest on the power cord. Do not locate this product where persons will walk on the cord.
SAFETY INSTRUCTIONS SAFETY INSTRUCTIONS 1-6 1-6 SAFETY INSTRUCTIONS SAFETY INSTRUCTIONS 5975069A BARCOVISION 708 200498 5975069A BARCOVISION 708 200498 c. If the product has been exposed to rain or water. d. If the product does not operate normally when the operating instructions are followed.
SAFETY INSTRUCTIONS SAFETY INSTRUCTIONS SAFETY INSTRUCTIONS 1-7 SAFETY INSTRUCTIONS 1-7 5975069A BARCOVISION 708 200498 5975069A BARCOVISION 708 200498 When installing the projector and screen, care must be taken to avoid exposure to ambient light directly on the screen.
2-1 2-1 UNPACKING AND DIMENSIONS UNPACKING AND DIMENSIONS UNPACKING AND DIMENSIONS UNPACKING AND DIMENSIONS 5975069A BARCOVISION 708 200498 5975069A BARCOVISION 708 200498 UNPACKING DIMENSIONS UNPACKI.
UNPACKING AND DIMENSIONS UNPACKING AND DIMENSIONS 2-2 UNPACKING AND DIMENSIONS 2-2 UNPACKING AND DIMENSIONS 5975069A BARCOVISION 708 200498 5975069A BARCOVISION 708 200498 Unpacking To open de banding, pull on the clip as shown in the first drawing. Take the projector out of its shipping carton and place it on a table.
2-3 2-3 UNPACKING AND DIMENSIONS UNPACKING AND DIMENSIONS UNPACKING AND DIMENSIONS UNPACKING AND DIMENSIONS 5975069A BARCOVISION 708 200498 5975069A BARCOVISION 708 200498 Projector dimensions Project.
INSTALLATION GUIDELINES INSTALLATION GUIDELINES INSTALLATION GUIDELINES 3-1 INSTALLATION GUIDELINES 3-1 5975069A BARCOVISION 708 200498 5975069A BARCOVISION 708 200498 INSTALLATION GUIDELINES Environm.
INSTALLATION GUIDELINES INSTALLATION GUIDELINES 3-2 INSTALLATION GUIDELINES 3-2 INSTALLATION GUIDELINES 5975069A BARCOVISION 708 200498 5975069A BARCOVISION 708 200498 Installation guidelines Careful .
INSTALLATION GUIDELINES INSTALLATION GUIDELINES INSTALLATION GUIDELINES 3-3 INSTALLATION GUIDELINES 3-3 5975069A BARCOVISION 708 200498 5975069A BARCOVISION 708 200498 * Which screen type? There are two major categories of screens used for projection equipment.
INSTALLATION GUIDELINES INSTALLATION GUIDELINES 3-4 INSTALLATION GUIDELINES 3-4 INSTALLATION GUIDELINES 5975069A BARCOVISION 708 200498 5975069A BARCOVISION 708 200498 * Where to install the projector? Abbreviations used on drawing and diagrams on next pages B = Distance between ceiling and top of the screen.
INSTALLATION GUIDELINES INSTALLATION GUIDELINES INSTALLATION GUIDELINES 3-5 INSTALLATION GUIDELINES 3-5 5975069A BARCOVISION 708 200498 5975069A BARCOVISION 708 200498 $ &' 3' % SURMHFWR.
INSTALLATION GUIDELINES INSTALLATION GUIDELINES 3-6 INSTALLATION GUIDELINES 3-6 INSTALLATION GUIDELINES 5975069A BARCOVISION 708 200498 5975069A BARCOVISION 708 200498 * How to install the projector? Ceiling mount or table mount? To install the projector, apply always the BARCO kits which are specially designed for this function.
INSTALLATION SET UP INSTALLATION SET UP 4-1 INSTALLATION SET UP 4-1 INSTALLATION SET UP 5975069A BARCOVISION 708 200498 5975069A BARCOVISION 708 200498 INSTALLATION SET UP Access to controls Scan adap.
INSTALLATION SET UP INSTALLATION SET UP 4-2 INSTALLATION SET UP 4-2 INSTALLATION SET UP 5975069A BARCOVISION 708 200498 5975069A BARCOVISION 708 200498 Access to controls Opening procedure : During the projector set up and installation it is necessary to open the top cover.
INSTALLATION SET UP INSTALLATION SET UP 4-3 INSTALLATION SET UP 4-3 INSTALLATION SET UP 5975069A BARCOVISION 708 200498 5975069A BARCOVISION 708 200498 During some installations it will become handy to remove the top cover totally.
INSTALLATION SET UP INSTALLATION SET UP 4-4 INSTALLATION SET UP 4-4 INSTALLATION SET UP 5975069A BARCOVISION 708 200498 5975069A BARCOVISION 708 200498 Scan adaptation The scanning can be switch by turning the Horizontal and Vertical scan connectors and the convergence connectors.
INSTALLATION SET UP INSTALLATION SET UP 4-5 INSTALLATION SET UP 4-5 INSTALLATION SET UP 5975069A BARCOVISION 708 200498 5975069A BARCOVISION 708 200498 COM M P ORT (800 peripherals) REM OTE RG ( S ) B.
INSTALLATION SET UP INSTALLATION SET UP 4-6 INSTALLATION SET UP 4-6 INSTALLATION SET UP 5975069A BARCOVISION 708 200498 5975069A BARCOVISION 708 200498 A : Horizontal scan inversion Three connectors are used, one for each horizontal deflection coil. When changing the horizontal scan, insure that all three connectors are set in the same position.
INSTALLATION SET UP INSTALLATION SET UP 4-7 INSTALLATION SET UP 4-7 INSTALLATION SET UP 5975069A BARCOVISION 708 200498 5975069A BARCOVISION 708 200498 After scan inversion, close the chassis and close the top cover. Reconnect the power cord to the wall outlet.
INSTALLATION SET UP INSTALLATION SET UP 4-8 INSTALLATION SET UP 4-8 INSTALLATION SET UP 5975069A BARCOVISION 708 200498 5975069A BARCOVISION 708 200498 S el e ct w i t h o r then <ENTER> <EXIT> to return.
PROJECTOR SET UP PROJECTOR SET UP PROJECTOR SET UP 5-1 PROJECTOR SET UP 5-1 5975069A BARCOVISION 708 200498 5975069A BARCOVISION 708 200498 PROJECTOR SET UP Password mode PROJECTOR SET UP Password mod.
PROJECTOR SET UP PROJECTOR SET UP 5-2 PROJECTOR SET UP 5-2 PROJECTOR SET UP 5975069A BARCOVISION 708 200498 5975069A BARCOVISION 708 200498 Projector Set Up The strap on the CPU unit allow a set up of the password mode.
PROJECTOR SET UP PROJECTOR SET UP PROJECTOR SET UP 5-3 PROJECTOR SET UP 5-3 5975069A BARCOVISION 708 200498 5975069A BARCOVISION 708 200498 Password mode With a strap on the controller unit, the important projector adjustments can be protected with a password.
POWER CONNECTION POWER CONNECTION POWER CONNECTION 6-1 POWER CONNECTION 6-1 5975069A BARCOVISION 708 200498 5975069A BARCOVISION 708 200498 POWER (MAINS) CONNECTION POWER (MAINS) CONNECTION.
POWER CONNECTION POWER CONNECTION 6-2 POWER CONNECTION 6-2 POWER CONNECTION 5975069A BARCOVISION 708 200498 5975069A BARCOVISION 708 200498 Power (mains) cord connection Use the supplied power cord to connect your projector to the wall outlet. Plug the female power connector into the male connector at the front of the projector.
POWER CONNECTION POWER CONNECTION POWER CONNECTION 6-3 POWER CONNECTION 6-3 5975069A BARCOVISION 708 200498 5975069A BARCOVISION 708 200498 Switching on/off The projector is switched ON and OFF using the power (mains) switch ON/OFF.
INSTALLATION ADJUSTMENTS INSTALLATION ADJUSTMENTS INSTALLATION ADJUSTMENTS INSTALLATION ADJUSTMENTS 7-1 7-1 5975069A BARCOVISION 708 200498 5975069A BARCOVISION 708 200498 INSTALLATION ADJUSTMENTS Ove.
INSTALLATION ADJUSTMENTS INSTALLATION ADJUSTMENTS 7-2 INSTALLATION ADJUSTMENTS 7-2 INSTALLATION ADJUSTMENTS 5975069A BARCOVISION 708 200498 5975069A BARCOVISION 708 200498 Entering the adjustment mode.
INSTALLATION ADJUSTMENTS INSTALLATION ADJUSTMENTS INSTALLATION ADJUSTMENTS INSTALLATION ADJUSTMENTS 7-3 7-3 5975069A BARCOVISION 708 200498 5975069A BARCOVISION 708 200498 Overview flow chart installation mode.
INSTALLATION ADJUSTMENTS INSTALLATION ADJUSTMENTS 7-4 INSTALLATION ADJUSTMENTS 7-4 INSTALLATION ADJUSTMENTS 5975069A BARCOVISION 708 200498 5975069A BARCOVISION 708 200498 Installation mode start up It will be necessary to perform several mechanical adjustments while in the installation mode.
INSTALLATION ADJUSTMENTS INSTALLATION ADJUSTMENTS INSTALLATION ADJUSTMENTS INSTALLATION ADJUSTMENTS 7-5 7-5 5975069A BARCOVISION 708 200498 5975069A BARCOVISION 708 200498 Push the control disc up or down to highlight "Installation" and press EN- TER.
INSTALLATION ADJUSTMENTS INSTALLATION ADJUSTMENTS 7-6 INSTALLATION ADJUSTMENTS 7-6 INSTALLATION ADJUSTMENTS 5975069A BARCOVISION 708 200498 5975069A BARCOVISION 708 200498 When the password mode is active, your password will be asked. Your password contains 4 digits.
INSTALLATION ADJUSTMENTS INSTALLATION ADJUSTMENTS INSTALLATION ADJUSTMENTS INSTALLATION ADJUSTMENTS 7-7 7-7 5975069A BARCOVISION 708 200498 5975069A BARCOVISION 708 200498 b) adjusting the projector with the local keypad.
INSTALLATION ADJUSTMENTS INSTALLATION ADJUSTMENTS 7-8 INSTALLATION ADJUSTMENTS 7-8 INSTALLATION ADJUSTMENTS 5975069A BARCOVISION 708 200498 5975069A BARCOVISION 708 200498 Scheimpfug adjustment The scheimpfug correction can be adjusted separately for the three tubes within 3 ranges: range 1 : 1.
INSTALLATION ADJUSTMENTS INSTALLATION ADJUSTMENTS INSTALLATION ADJUSTMENTS INSTALLATION ADJUSTMENTS 7-9 7-9 5975069A BARCOVISION 708 200498 5975069A BARCOVISION 708 200498 1.
INSTALLATION ADJUSTMENTS INSTALLATION ADJUSTMENTS 7-10 INSTALLATION ADJUSTMENTS 7-10 INSTALLATION ADJUSTMENTS 5975069A BARCOVISION 708 200498 5975069A BARCOVISION 708 200498 Optical lens focusing The optical focusing procedure is performed separately for each lens.
INSTALLATION ADJUSTMENTS INSTALLATION ADJUSTMENTS INSTALLATION ADJUSTMENTS INSTALLATION ADJUSTMENTS 7-11 7-11 5975069A BARCOVISION 708 200498 5975069A BARCOVISION 708 200498 Electrical focusing The electrical focus for red, green and blue is factory preset.
INSTALLATION ADJUSTMENTS INSTALLATION ADJUSTMENTS 7-12 INSTALLATION ADJUSTMENTS 7-12 INSTALLATION ADJUSTMENTS 5975069A BARCOVISION 708 200498 5975069A BARCOVISION 708 200498 Raster centering The raster must be centered on the CRT screen surface of each tube, therefore, it is necessary to look into the lenses.
INSTALLATION ADJUSTMENTS INSTALLATION ADJUSTMENTS INSTALLATION ADJUSTMENTS INSTALLATION ADJUSTMENTS 7-13 7-13 5975069A BARCOVISION 708 200498 5975069A BARCOVISION 708 200498 233 Press ENTER to activate the raster on the Red CRT faceplate. Shift the raster with the control disc until the raster is centered in the middle of the CRT faceplate.
INSTALLATION ADJUSTMENTS INSTALLATION ADJUSTMENTS 7-14 INSTALLATION ADJUSTMENTS 7-14 INSTALLATION ADJUSTMENTS 5975069A BARCOVISION 708 200498 5975069A BARCOVISION 708 200498 CRT projection angle adjustment The projection angle of the red and blue CRT's is dependent on the desired size of the projected image.
INSTALLATION ADJUSTMENTS INSTALLATION ADJUSTMENTS INSTALLATION ADJUSTMENTS INSTALLATION ADJUSTMENTS 7-15 7-15 5975069A BARCOVISION 708 200498 5975069A BARCOVISION 708 200498 The same projection angle is misaligned for new screen width SW2. Realignment is necessary.
INSTALLATION ADJUSTMENTS INSTALLATION ADJUSTMENTS 7-16 INSTALLATION ADJUSTMENTS 7-16 INSTALLATION ADJUSTMENTS 5975069A BARCOVISION 708 200498 5975069A BARCOVISION 708 200498 red crosshair green crossh.
INSTALLATION ADJUSTMENTS INSTALLATION ADJUSTMENTS INSTALLATION ADJUSTMENTS INSTALLATION ADJUSTMENTS 7-17 7-17 5975069A BARCOVISION 708 200498 5975069A BARCOVISION 708 200498 EXIT returns to the CRT projection angle adjustment.
INSTALLATION ADJUSTMENTS INSTALLATION ADJUSTMENTS 7-18 INSTALLATION ADJUSTMENTS 7-18 INSTALLATION ADJUSTMENTS 5975069A BARCOVISION 708 200498 5975069A BARCOVISION 708 200498 Alignment of the projector. Overview of the corrections For detailed information about these corrections and procedures to be followed, see owner's manual.
APPENDIX A : CEILING MOUNT KIT CM50 APPENDIX A : CEILING MOUNT KIT CM50 A-1 APPENDIX A : CEILING MOUNT KIT CM50 A-1 APPENDIX A : CEILING MOUNT KIT CM50 5975069A BARCOVISION 708 200498 5975069A BARCOVISION 708 200498 Ceiling mount kit for 700 projectors (CM50).
APPENDIX B : G2 ADJUSTMENT APPENDIX B : G2 ADJUSTMENT APPENDIX B : G2 ADJUSTMENT B-1 APPENDIX B : G2 ADJUSTMENT B-1 5975069A BARCOVISION 708 200498 5975069A BARCOVISION 708 0200498 G2 adjustment Enter the adjustment mode by pressing ADJUST and highlight Service .
APPENDIX B : G2 ADJUSTMENT APPENDIX B : G2 ADJUSTMENT B-2 APPENDIX B : G2 ADJUSTMENT B-2 APPENDIX B : G2 ADJUSTMENT 5975069A BARCOVISION 708 A 200498 5975069A BARCOVISION 708 200498 continue with the G2 adjustment, oth- erwise press EXIT to return to the service menu.
APPENDIX B : G2 ADJUSTMENT APPENDIX B : G2 ADJUSTMENT APPENDIX B : G2 ADJUSTMENT B-3 APPENDIX B : G2 ADJUSTMENT B-3 5975069A BARCOVISION 708 200498 5975069A BARCOVISION 708 0200498 - Adjust the G2 potentiometers very slowly with a screwdriver until the corresponding LED just stops illuminating.
Un punto importante, dopo l’acquisto del dispositivo (o anche prima di acquisto) è quello di leggere il manuale. Dobbiamo farlo per diversi motivi semplici:
Se non hai ancora comprato il Barco R9002327 è un buon momento per familiarizzare con i dati di base del prodotto. Prime consultare le pagine iniziali del manuale d’uso, che si trova al di sopra. Dovresti trovare lì i dati tecnici più importanti del Barco R9002327 - in questo modo è possibile verificare se l’apparecchio soddisfa le tue esigenze. Esplorando le pagine segenti del manuali d’uso Barco R9002327 imparerai tutte le caratteristiche del prodotto e le informazioni sul suo funzionamento. Le informazioni sul Barco R9002327 ti aiuteranno sicuramente a prendere una decisione relativa all’acquisto.
In una situazione in cui hai già il Barco R9002327, ma non hai ancora letto il manuale d’uso, dovresti farlo per le ragioni sopra descritte. Saprai quindi se hai correttamente usato le funzioni disponibili, e se hai commesso errori che possono ridurre la durata di vita del Barco R9002327.
Tuttavia, uno dei ruoli più importanti per l’utente svolti dal manuale d’uso è quello di aiutare a risolvere i problemi con il Barco R9002327. Quasi sempre, ci troverai Troubleshooting, cioè i guasti più frequenti e malfunzionamenti del dispositivo Barco R9002327 insieme con le istruzioni su come risolverli. Anche se non si riesci a risolvere il problema, il manuale d’uso ti mostrerà il percorso di ulteriori procedimenti – il contatto con il centro servizio clienti o il servizio più vicino.