Manuale d’uso / di manutenzione del prodotto R5976562 del fabbricante Barco
Vai alla pagina of 135
B a rc o S L M G 1 0 Pe rfo rm e r Owners Manual R9010000 R5976562/03 20/10/2004.
Barco nv Eve nts Noordl aan 5, B-8520 Kuurne Phone: +32 56.36.89.70 Fax: +32 56.36.88.24 E-mail: events@barco.com Visit us at the web: www.barco.com P r i n t e di nB e l g i u m.
Changes Barco provides this manual ’as is’ without warranty of any kind, either ex pressed or implied, including but not limited to the i mplied war- ranties or merchantability and fitness for a particular purpose.
.
Table of con tents T ABLE OF CONTENTS 1 . S a f e t y I n s t r u c t i o n s .................................................................................................. 5 1 . 1 W a r n i n g s .............................. ...................
Table of con tents 7. Random Access Adjustme nt Mode .............................................................................5 7 7 . 1 O v e r v i e w F l o w ................. ...................... ....................... ......................
Table of con tents 9 . S e r v i c e M o d e...................................................................................................... 1 0 1 9 . 1 B u i l t - u p ................ ....................... ...................... ............
Table of con tents 4 R5976562 BARCOSLM G10 PERFOR MER 20/10/2004.
1. Safety Inst ructions 1. SAFETY INSTRUCTIONS 1.1 W arnings T o prevent personnel injury The customer should never attempt to disassemble the lamp c asing or to dispose of the lamp casing other than by returning it to BARCO.
1. Safety Instruction s Extra Safety manual Read also safety instructions in separate manual ( R597 6125 ). 6 R5976562 BARCOSLM G10 PERFOR MER 20/10/2004.
2. Packaging and Di mensions 2. P ACKAGING AND DIMENSIONS Overview • Projector Packaging • Box Content • Lamp Packaging • Lens Packaging • Projector Case 2.1 Projector Packag ing W ay of Packaging The projector is packed in a carton box. T o provide p rotection du ring transportation, the projector is surrounded with foam.
2. Packaging a nd Dimension s 2.3 Lamp Packaging W ay of packaging As it is not allowed to transport the proj ector with the lamp mounted inside the projector , this lamp is packed in a separate carton box. Save this carton box , it can be used to repack the lamp when yo u ever have to transport your projector .
2. Packaging and Di mensions Image 2-3 Side view di mensions R5976562 BARCOSLM G10 PERFORMER 20/10/2004 9.
2. Packaging a nd Dimension s 10 R5976562 BARCOSLM G10 PERFOR MER 20/10/2004.
3. Installation Gu idelines 3. INST ALLA TION GUIDELINES The engines are non sealed versions. 3.1 General W ARNING : Before installing t he projector , read first the safety instruc tions.
3. Installa tion Guide lines Screens are rated by how much light they reflect (or transmit i n the case of rear projection systems) given a determined amount of light projected toward them. The ‘GAIN’ of a screen is the te rm used. Front and rear screens are both rated in terms of gain.
3. Installation Gu idelines T able mounted, front projection, second way . Screen PD B Floor Projector CD SH Optical axis projection lens SH SW SIDE VIEW BACK VIEW Screen TOP VIEW SW Floor Table/Top s.
3. Installa tion Guide lines Ceiling mounted, front projection, second way . Screen PD B Ceiling Projector CD SH Optical axis projection lens SH SW SIDE VIEW BACK VIEW Screen CEILING VIEW SW Ceiling Ceiling/Top side facing ceiling A CD = SH/2 + B + A - 554mm Image 3-4 Ceiling mounted p rojector 3.
3. Installation Gu idelines A Image 3-5 Safety a rea around the proj ector R5976562 BARCOSLM G10 PERFORMER 20/10/2004 15.
3. Installa tion Guide lines 3.4 Projector tilting T urning around the projection axes (E) FRONT VIEW (D)Lamp Axis 15 ° 15 ° (C) Start point Image 3-6 Tilting diagram A Allowed Projector Tilting Are.
3. Installation Gu idelines 3.5.1 Access to the Lamp Unit. What has to be done T o access the lamp casing, a side panel has to be removed. Necessary t ools A flatblade screwdri ver of 5 mm R e m o v i n gt h es i d ep a n e l 1. Turn with a screwdriver the side panel lock screw a quarter turn counter clockwise.
3. Installa tion Guide lines Necessary t ools Flatblade screwdriver of 5mm or Nut driver 8mm Installin g the lam p unit 1. Remove the lock nut on the 3 spa cer screws (A). (image 3-9) 2. Line up the lamp unit guides with the guides on the projector f rame (B) and push the unit into the frame until it fits.
3. Installation Gu idelines Image 3-10 Inserting the lamp Image 3-1 1 Securing the lamp 3.5.3 Reinstall ing the Side Panel What has to be done After the new lamp unit has been installed, the side panel has to be remounted. Necessary t ools A flatblade screwdri ver of 5 mm Reinstall ing the side panel 1.
3. Installa tion Guide lines Image 3-12 Mounting the side cover Image 3-13 Closing the side cover Image 3-14 L o c k i n gt h es i d ec o v e r 3.6 Re-adjusting the lamp position i n the lamp casing W ARNING : As the p rojector has to be open ed, this proced ure has to be performed by qu alified service tech- nician.
3. Installation Gu idelines Suggestion Lamp runtime is 105 hours It is advisable to adjust the Z-axis of the lamp to obtain maximum light output (see owners manual) <ENTER> to confirm Menu 3-1 The user can now adjust the Z-axis by following the next procedure.
3. Installa tion Guide lines A Image 3-16 C AUTION : Never turn the other screws ! These are factory aligned. 3. 7 Le nses O verview • Lenses • Lens selection • Lens formulas • Lens Installation • Clean ing the lens 3.7.1 Lenses A vailable l enses TLD(1.
3. Installation Gu idelines TLD HB(2.0–2.8:1) R9842080 TLD HB(2.8–5.0:1) R9842100 TLD HB(5.0–8.0:1) R9842120 3.7.2 Lens selec tion How to s elect ? 1. Determine the required screen width. 2. Determine the a pproximate position of the projector in the pr ojection room with regard to the scre en and measure the projector- screen distance (PD).
3. Installa tion Guide lines 3.7.4 Lens Install ation How to insta ll ? Follow the next procedure: 1. Remove th e foam rubber in the opening of the lens holder . 2. T ake the lens assembly out of its packing material and remove the lens caps on both sides.
3. Installation Gu idelines 3.8 Battery Installation in the RCU How is the batte ry delivered ? A battery (not yet installed to save the battery life time) is delivered inside the plastic bag with the power cord.
3. Installa tion Guide lines Image 3-21 Stacking two projectors Image 3-22 Closing the riggin g sockets A Image 3-23 Mounting the securit y chain Image 3-24 Mounting the security hoo k 26 R5976562 BAR.
3. Installation Gu idelines C B B Image 3-25 Mounting the security hook (de tail) How to open a secured rigging poi nt? 1. Push the ring (A) of the first projector downwards and hold it in that position. (image 3-26) 2. Turn the locked part (B) of the second projecto r a quarter counter clockwise and move it upwards.
3. Installa tion Guide lines 3.10 Rigging points and Accessories Clamps Slots are made in the carry handle frame for easy inserting the overlockers and for easy adjusting the clamps position so that this position matches with the rigging p oints.
3. Installation Gu idelines How to mount t he Overlockers to th e truss? T o mount the overlocker to the truss, handle as follow : 1. Open the fixation han dle. (image 3-30) 2. Hook the clamp arou nd the tube. The trigger automatically shuts the clamp.
3. Installa tion Guide lines 30 R5976562 BARCOSLM G10 PERFOR MER 20/10/2004.
4. Connecti ons 4. CONNECTIONS Overview • Power connection • Switching on • Switching to standby • Switching off • Input Source Connections • Communication Connections 4.1 Power connection AC Power cord connection Use the supplied power cord to connect your projector to the wall outlet.
4. Connecti ons Lamp run time indica tion while running When the total run time of the lamp is 30 hours less then 1000, the following warning message will be displayed for 1 minute. This warning message will be repeated every 30 min utes. Pre ss EXIT to remove the message before the minute is over .
4. Connecti ons 4.3 Switching to standby H o wt os w i t c ht os t a n d b y ? 1. Press Standby to switch the projector to standby . 4.4 Switching off How to swi tch off the pro jector? 1. Press first Standby . 2. Let cool down the p rojector until the fans stop blowing, at least 15 min.
4. Connecti ons slot 1 RGB/Component slot 2 Video slot 3 not used slot 4 not used When using a RCVDS05, it is recommended to use a 5-cable output module in the RCVDS. The outputs of this module has to be connected to slot 1 of the projector . T o switch the project or in the 5-cable mode see "Fixed slot (slot 1 & 2)", page 35.
4. Connecti ons How to select the new installed module? The new installed module can be selected with the digit buttons on the RCU or the local keyp ad. 4.5.4 Fixed slot (slo t 1 & 2) Where to find? Slot 1 & 2 has 5 BNC input terminals for 5 cable input and a DVI plug for DVI input.
4. Connecti ons 5. Press ENTER . The internal system will scan the inputs and displays the result in the Input Slots menu. 6. Push the cursor key ↑ or ↓ to select th e first or second slot.
4. Connecti ons OUT IN On R9840450 HD SDI DIGITAL MODULE OUT IN On 9840110 SDI DIGITAL INPUT COMM PORT TRIGGER OUT RS232/422 OUT RS232/422 IN IR-Receiver Diagnostic Code Green Operation Red Stand-by I.
4. Connecti ons OUT IN On R9840450 HD SDI DIGITAL MODULE OUT IN On 9840110 SDI DIGITAL INPUT COMM PORT TRIGGER OUT RS232/422 OUT RS232/422 IN IR-Receiver Diagnostic Code Green Operation Red Stand-by I.
4. Connecti ons OUT IN On R9840450 HD SDI DIGI TAL MODULE P R P B On COMM PO RT Ethernet RS232/422 OUT RS232/422 IN IR-Receiver Diagnostic Code Green Operation Red Stand-by IR Sync OK Hardwired remote.
4. Connecti ons 4.6 Communication Connections Overview • RS232 (RS422) Connection • Linked System • Communication with peripherals • Network connect ion 4.6.1 RS232 (RS422) Connection Applic ation 1. Remote control : - e asy adjustment of projector via an IBM PC (or compatible) or MAC connection.
4. Connecti ons 45678 9 123 45678 9 1 Pin Number Pin Number DB9 Female Connector DB9 Female Connector 23 Image 4-8 Make a Custom Null Modem Cable R5976562 BARCOSLM G10 PERFORMER 20/10/2004 41.
4. Connecti ons To next COMM 800 S p litte r COM 800 Splitter 1 (R9827941) Front Slave 1 TO SWITC HER COMM 800 Splitter To Slave 2 To Slave 3 Custom Null Modem Cable TO IR R ECEIVER Front Slave 4 To Slave 5 To Slave 6 TO SWITC HER COMM 800 Splitter TO IR R ECEIVER Back TO PRO J.
4. Connecti ons 4.6.3 Communication wi th peripherals What is possible wit h an RCVDS05 connected. • Up to 20 inputs with the RCVDS 05 and 90 inputs when RCVDS’s are linked via the expansion module.
4. Connecti ons OUT IN On R9840450 HD SDI DIGITAL MODULE OUT IN On 9840110 SDI DIGITAL INPUT COMM PORT TRIGGER OUT RS232/422 OUT RS232/422 IN IR-Receiver Diagnostic Code Green Operation Red Stand-by I.
5. Getting Started 5. GETTING ST ARTED 5.1 RCU & Local keypad How controlling t he projector ? The projector can be controlled by the local keypad or by the remote control unit. Location of the loca l keypad ? The local keypad is located on the input side of the projector .
5. Getting Star ted 1 Barco key selection key , to get direct access to the lens a djustment menus. 2 ADJ ADJUST key , to enter or exit the adjustment mode. 3 Address key (recessed key), to enter the address of the projector (between 0 and 9). Press the recessed address key with a pencil, followed by pressing one digit button between 0a n d9 .
5. Getting Started - + - + - + - + - + 0 9 7 8 6 5 4 3 2 1 ENTER 32a PAUSE - + PHASE FREEZ TEXT EXIT ADJ STBY SHARPNESS TINT COLOR BRIGHTNESS CONTRAST HELP ? COLOR PHASE SHARPN TINT BRIGHTN STANDBY ENTER TEXT EXIT PAUSE 2 1 4 3 5 6 8 0 9 7 CONTRAST A Image 5-2 Lamp Run time indication see chapter "4.
5. Getting Star ted ERROR DMD out of operating temperature range Automatic shutdown is activated Menu 5-1 5.4 Quick Set Up A djustments Overview • Quick Language Change • Quick Lens Adjustment • Quick On Screen Color change 5.
5. Getting Started LENS ADJUSTMENT ZOOM/FOCUS ZOOM with or , FOCUS with or <ENTER> to shift <EXIT> to return Image 5-3 Press the selection key * to switch to a nother pattern. D ifferent patterns are available. Quick s hift adju stment 1. Press the Selection key * , Barco key .
5. Getting Star ted 6. Push the cursor key ↑ or ↓ to highlight Highlighted item color . 7. Press ENTER to toggle betw een red, green and yellow. ADJUSTMENT MODE Select a path from below : RANDOM A.
5. Getting Started OUT IN On R9840450 HD SDI DIGITA L MODULE OUT IN On 9840110 SDI DIGITAL INPUT COMM PORT 10/(100) BASE-T RS232/422 OUT RS232/422 IN IR-Receiver Diagnostic Code Green Operation Red St.
5. Getting Star ted Directly to one of the IR sensors When using the wireless remote control, make sure you are within th e effective operating distance (30m, 100ft in a straight line).
5. Getting Started Common Addres s Every projector has a common address ’0’ or ’1’. The c hoice between ’0’ and ’1’ can be selected in the Service mode. 5.6.2 Displaying and Pro gramming addresses Displaying the P rojector Address on the Scr een.
5. Getting Star ted T o restart the image : •P r e s s Pause key . •P r e s s EXIT key • Select a source number . The Stand-by Ke y When the Stand-by key is pressed, the image projection is stopped and the projector goes to stand-by . T his situation is used when a projection stop is planned for a longer period.
6. St art up of the Adjust ment mode 6 . S T A R TU PO FT H EA D J U S T M E N TM O D E 6.1 Start up Possible paths There are 3 possible paths to follow once in the Adjustment mode. They are : • Installation - Installation should be selected if a new input modu le is installed or a new source is connected to an e xisting input module.
6. St art up of the Adjustme nt mode Entering your password 1. The first digit position is h ighlighted. Enter the first digit. (menu 6-2) The highlighted square jumps to the next position. 2. Continue with the other digits E x a m p l e: 2319 When your password is correct, you gain access to the selected item.
7. Rand om Access Adjustment Mode 7. RANDOM ACCESS ADJUSTMENT MODE Overview • Overview Flow •P i c t u r e S e r v i c e s • Picture T uning • Geometry • ScenergiX • Picture in Picture (PiP) • Save Changes 7.
7. Rand om Access Adjustment Mode Start up 1. Push the cursor key ↑ or ↓ to highlight Random Access . (menu 7-1) 2. Press ENTER . (menu 7-2) ADJUSTMENT MODE Select a path from below : RANDOM ACCES.
7. Rand om Access Adjustment Mode Possible file Manip ulations The following file manipulations are possible : • Load : installation of a file for a new source. • Edit : editing a loaded file to the source specs. • Rename : renaming a file. • Copy : copying a file.
7. Rand om Access Adjustment Mode H o wt ol o a daf i l e? 1. Push the cursor key ↑ or ↓ to select the best fitting file. (menu 7-7) 2. Press ENTER to selec t. A confirm Load file menu will be displayed with the newly created file and the one on which the new file is based on.
7. Rand om Access Adjustment Mode 7.2.5.2 Changing the settings Differ ent methods The 3 different methods to change a setting will be described hereafter . These methods are: • with the numeric keys on the remote control. • with the arrow keys selecting the changing digit.
7. Rand om Access Adjustment Mode V e rtical Start numb er of lines between the start of the input signal and start of the image on the screen. Interlaced [On] or [Off] this selection is automatically filled when active file has to be edited. If the image is wrong due to mismeasurement, use the ENT ER key to toggle between [On] and [Off].
7. Rand om Access Adjustment Mode V e rtical refresh [sync/async] The way of updating the image information. Not available for P AL-NTSC-SECAM sources. This option will be displayed in gra y . • For sources with a vertical frequency up to 60 Hz : the vertical refresh rate is the same as the vertical frequency of the incoming source.
7. Rand om Access Adjustment Mode 7.2.6 Rename Start Up T o change the name of a selected file : 1. Push the cursor key ↑ or ↓ to highlight Rename . (menu 7-13) 2. Press ENTER . The Rename selection menu will be displayed. (menu 7-14) 3. Push the cursor key ↑ or ↓ to select a file name.
7. Rand om Access Adjustment Mode 7.2.7 Copy Start Up T o copy the name of a selected file : 1. Push the cursor key ↑ or ↓ to highlight Copy . 2. Press ENTER . The Copy selection menu will be di splayed. (menu 7-17) 3. Push the cursor key ↑ or ↓ to select a file name.
7. Rand om Access Adjustment Mode 4. Press ENTER to selec t. If [all] is selected, your password has to be entered before all files will be deleted. A confirmation menu "Delete file ’file name’?" is displayed. (menu 7-22) 5. Press ENTER to delete the file, press EXIT if you want to keep it.
7. Rand om Access Adjustment Mode 7.3 Picture T uning Overview •S t a r t u p •C T I • Color T emperature • Gamma • Decoding • Dynamic Color Depth • Noise Reduction • Input Balance 7.3.1 Start up Start up T o improve the image quality , the items in the Pi cture Tuning m enu can be toggled or adjusted.
7. Rand om Access Adjustment Mode 7.3.3 Color T emperature A vailable Color tempera tures • Projector white • Broadcast 3200K • Film 5400K • Video 6500K • Computer 9300K • Custom balance Start Up 1. Push the cursor key ↑ or ↓ to highlight Color T emperature .
7. Rand om Access Adjustment Mode Changing the gamma val ue 1. Push the cursor key ↑ or ↓ to highlight Gamma . (menu 7-30) 2. Press ENTER to selec t. 3. Change the gamma value by pushing the cursor ke y ← or → until the desired value is reached.
7. Rand om Access Adjustment Mode Changin g the Dynam ic Color depth va lue. 1. Push the cursor key ↑ or ↓ to highlight Dynamic Color Depth . (menu 7-32) 2. Press ENTER to selec t. 3. Change the value by pushing the cursor key ← or → until the desired dark color saturation is reached.
7. Rand om Access Adjustment Mode Before starting the Input Balance functi on, generate a sign al with dominant black an d white areas. 7.3.8.1 Input Balance for RGB input signals Step to be taken for RGB i nput signals T o adjust the input balance, the following steps have to be executed in the following order : 1.
7. Rand om Access Adjustment Mode 7.3.8.2 Input Balance for YUV signals Steps to be take n for YUV 1. Is the input balance menu alre ady activated ? If yes, go to step 4 If no, go to step 2 2. Push the cursor key ↑ or ↓ to highlight Input Balance .
7. Rand om Access Adjustment Mode 7.4 Geometry Overview • Introduction • Geometry start up •S h i f t •S i z e • Side Keystone •B l a n k i n g • Aspect Ratio • Geometry Options 7.4.1 Intr oduction Introduction An adjustment can be done as follow : 1.
7. Rand om Access Adjustment Mode Image 7-4 Shift adjust ment A Shift to the left B Shift to the r ight C Shift upwards D Shift do wnwards How to sh ift the ima ge ? 1. Push the cursor key ↑ or ↓ to highligh t Shift . (menu 7-42) 2. Press ENTER to selec t.
7. Rand om Access Adjustment Mode When adjusting the vertical size, Th e upper side of the image is fixe d (table and ceiling mounted configura tions) and only the lower side can be moved to its exact position. When adjusting the horizontal size, the left side of the image is fixed and only the right side can be moved to its exact position.
7. Rand om Access Adjustment Mode Image 7-6 Side Keystone Side keystone adjustment 1. Push the cursor key ↑ or ↓ to highlight Side Keystone . (menu 7-44) 2. Press ENTER to selec t. 3. Push the cursor key ← or → to adjust the keystone of the image.
7. Rand om Access Adjustment Mode Image 7-7 Blanking A T op blanking B Bottom blanking C Left blanking D Right blanking Adjusting th e blanking. 1. Push the cursor key ↑ or ↓ to highlight Blanking . (menu 7-45) 2. Press ENTER to display the blanking menu.
7. Rand om Access Adjustment Mode How to set up the des ired aspect ratio ? 1. Push the cursor key ↑ or ↓ to highlight Aspect R atio . (menu 7-47) 2.
7. Rand om Access Adjustment Mode 7.5.1 Order informati on Order numbers SLM G5 R9840880 SLM R6 R9840890 SLM G8/G10 R9841500 SLM R8/R10/R9+/R12+ R9841510 7.5.2 Intr oduction When available ? ScenergiX is only available as an option, some menu items will be grayed out when this option is not installed.
7. Rand om Access Adjustment Mode 7.5.3 Preparati ons ScenergiX Preparati ons T o ensure proper Scene rgiX adjustment, be sure that the follo wing adjustments are done perfectly on all projectors: • Convergence (Electronic Convergence). • Geometry • Color Matching (Color T empera ture, Input Balance, Gamm a) 7.
7. Rand om Access Adjustment Mode Horizontal Resolution source : number of active pixels of the source. Adjustment of Ac tive pixels (Pact) o f the first project or 1. Go to File –> Edit menu of first projector . 2. Enter value for horizontal active (= Pact) as follows : Pact = [(Horz.
7. Rand om Access Adjustment Mode Adjustment of Acti ve lines (Lact) of second project or 1. Go to File –> Edit menu o f second projector . 2. Enter value for vertical act (= Lact) as follows : Lact = [(V ert.. resolu tion of 1 projector)/(T otal ve rt.
7. Rand om Access Adjustment Mode Image 7-12 Width selec tions Image 7-13 Width set up for projector 1 R5976562 BARCOSLM G10 PERFORMER 20/10/2004 83.
7. Rand om Access Adjustment Mode Image 7-14 Width set up for projector 2 7.5.8 Adjusting the bl ack level of the imag es Why For dark images, the overlap zone will be brighter then the rest of the images. Therefore we can rise the black level of the remaining image (exclu ding the overlap zone).
7. Rand om Access Adjustment Mode 7.6 Picture in Picture ( PiP) Overview • Introduction to PiP • Picture in Picture activation • Picture in Picture source • Position of Picture in Picture window • Set up of the Quick Selection 7.
7. Rand om Access Adjustment Mode 7.6.2 Picture in Pictu re activation How to activate P IP? 1. Push the cursor k ey ↑ or ↓ to highlight PIP . (menu 7-54 ) 2. Press ENTER to selec t. The PIP menu will be displayed. (menu 7 -55) 3. Push the cursor key ↑ or ↓ to highlight Status .
7. Rand om Access Adjustment Mode How to pos ition? 1. Push the cursor key ↑ or ↓ to highlight Position . (menu 7-57) 2. Press ENTER to toggle bet ween T op-Left , T op-Right , Bottom-Left or Bottom-Righ t.
7. Rand om Access Adjustment Mode 88 R5976562 BARCOSLM G10 PERFOR MER 20/10/2004.
8. Installa tion Mode 8. INST ALLA TION MODE Overview • Start up of the Installation mode • Input Slots • 800 peripheral • Source Switching •N o S i g n a l • Contrast Enhancement • Convergence • Configuration • Lens Adjustment • Quick Access Keys •O S D • Internal Patterns 8.
8. Inst allation Mo de T o view or the change the input configurati on. 1. Push the cursor key ↑ or ↓ to highlight Input Slots . (menu 8-3) 2. Press ENTER to selec t.
8. Installa tion Mode 8.3 800 peripheral Overview • Defining the output module of the RCVDS05. • Defining the Infrared Communication protocol • CLO using Comm 800 8.
8. Inst allation Mo de 8.3.3 CLO using Comm 800 What can be done? CLO can be activated in a linked system setup usi ng the COM800 Protocol + Ports. By using the CO M800 Protocol + Ports, the RS232 Ports can be used for a RS232 lin ked setup, CLO is received through the COM800 Ports, general RS232 comm ands are received through the RS232 Ports.
8. Installa tion Mode Image 8-1 Example of seamless switching with Fad e effect. When an effect is selected within seam less source switching, wait until the effect is terminated before sw itch- ing to another sour ce (± 2 seconds).
8. Inst allation Mo de 8.5.2 Changing the Shutdown Sett ing How to change ? 1. Push the cursor key ↑ or ↓ to highlight No Signal . (menu 8-14) 2. Press ENTER to selec t. The no signal menu will be displayed. (menu 8-15) 3. Push the cursor key ↑ or ↓ to highlight Shutdow n .
8. Installa tion Mode T o change the Contrast Enhancement value 1. Push the cursor key ↑ or ↓ to highlight Contrast Enhancement . (menu 8-18) 2. Press ENTER to selec t. The contrast enhancement menu will be displayed. (menu 8-19) 3. Push the cursor key ↑ or ↓ to highlight the desired contrast enhancement, normal or high.
8. Inst allation Mo de Set up the Correct Configurat ion 1. Push the cursor key ↑ or ↓ to highlight Configuration . (menu 8-23) 2. Press ENTER to selec t.
8. Installa tion Mode How to Zoom/Focus ? 1. Push the cursor key ↑ or ↓ to select Zoom/Focus. (menu 8-26) 2. Push the cursor key ↑ or ↓ to zoom and ← or → to focus the image.see "Quick Set Up Adjustments", page 48 3. When finished, press EXIT to return to the lens adjustment menu or press ENTER to go to the shift function.
8. Inst allation Mo de Options The zoom/focus and shift can be set the same for all files. 1. Push the cursor key ↑ or ↓ to highlight Op tions . (menu 8-28) 2. Press ENTER to selec t. The Lens Options menu will be displayed. (menu 8-29) 3. Press ENTER to toggle between ’Y es’ or ’No’.
8. Installa tion Mode 8.1 1 OSD Overview • Color Settings • Menu Position 8.1 1.1 Color Settings How to change 1. Push the cursor key ↑ or ↓ to highligh t OSD . (menu 8-32 ) 2. Press ENTER to selec t. 3. Push the cursor key ↑ or ↓ to highlight Highlighted item color .
8. Inst allation Mo de Av a i l a b l e p a t t e r n s - Outline -H a t c h - C olor bars - Multiburst - C hecker board - Pa ge Char - Alpha numeric char How to se lect an intern al patterns? 1. Push the cursor key ↑ or ↓ to highlight Internal Patter ns .
9. Service Mode 9. SER VICE MODE 9.1 Built-up Built-up The service menu is built-up in two parts which are connected together with the ’mo re’ item. If the desire d item is not in the list of the displayed menu, select ’more’ with the cursor key and push ENTER to display the other items in the service menu.
9. Service Mode Start Up 1. Push the cursor key ↑ or ↓ to highlight Ide ntification . (menu 9-4) 2. Press ENTER to display the Identification screen. (menu 9-5) SERVICE IDENTIFICATION CHANGE PASSWORD CHANGE LANGUAGE CHANGE PROJ. ADDRESS SERIAL COMMUNICATION NETWORK LAMP DIMMING MORE.
9. Service Mode Image 9-1 Image 9-2 Access password switch Image 9-3 Metal top cover Image 9-4 H ow to change the password ? 1. Push the cursor key ↑ or ↓ to highlight Change Password . (me nu 9-6) 2. Press ENTER to display the C hange Password menu.
9. Service Mode Set up of an Access Contro l List. 1. Push the cursor key ↑ or ↓ to highlight Change Password. (menu 9-8) 2. Press ENTER to display the Change password menu. (menu 9-9) Note: Only possible when Ow ner . 3. Push the cursor key ↑ or ↓ to highlight Access Control List .
9. Service Mode 9.5 Changing Language Start up 1. Push the cursor key ↑ or ↓ to highlight Change Langua ge . (menu 9-1 1 ) 2. Press ENTER to display the Chan ge Language menu. (menu 9-12) 3. Push the cursor key ↑ or ↓ to highlight the desired language.
9. Service Mode 4. Press ENTER to activate . The address digit will be highlighted. 5. Select 0 or 1 with the ↑ or ↓ keys Or , enter the new value with the numeric keys. SERVICE IDENTIFICATION CHANGE PASSWORD CHANGE LANGUAGE CHANGE PROJ. ADDRESS SERIAL COMMUNICATION NETWORK LAMP DIMMING MORE.
9. Service Mode 9.7.2 Baud rate Setting Set up T o change the baud rate, handle as follow: 1. Push the cursor key ↑ or ↓ to highlight Baudrate . (menu 9-19) The actual baud rate will be displayed. 2. Press ENTER to toggle between the available baudrates.
9. Service Mode 9.7.4 RS422 T ermination Set up The last projector in a line should be RS422 terminated (ON position). All others in the line should be in the OFF position. T o change the terminatio n position : 1. Push the cursor key ↑ or ↓ to highlight RS422 T ermination.
9. Service Mode Entering the necessary addresse s. 1. Select the IP a ddress with the cursor keys. (menu 9-24) 2. Press ENTE R to edit. 3. Enter or reprogram the address with the numeric keys (conta ct your network responsible for the correct address).
9. Service Mode 100 Clo value Time [h] L i g h t o u t p u t [ % ] Image 9-5 CLO function of one projector Linked CLO, used by multiple projectors If the linked CLO function is in the OFF position, the lamp of each projector will follow its own life cycle curve (dotted lines).
9. Service Mode Proj 1 Proj 2 Proj 3 Proj 4 in in in in out out out RS RS RS Terminator Image 9-7 Principal di agram : linking via RS p ort Linking via the Comm port The constant light output of the p.
9. Service Mode How to display the l amp menu 1. Push the cursor key ↑ or ↓ to highlight Lamp . (menu 9-26) 2. Press ENTER to selec t. The lamp menu will be displayed. (menu 9-27) SERVICE IDENTIFICATION CHANGE PASSWORD CHANGE LANGUAGE CHANGE PROJ.
9. Service Mode How to di m 1. Push the cursor key ↑ or ↓ to highlight Dimming . (menu 9-28) 2. Press ENTER to selec t. A dimming slider box appears on the screen. 3. Use the ↑ or ↓ keys to dim the lamp until the desired light output is reached.
9. Service Mode 9.12 Add-Ins How to get add ins? The available add-ins can be activated by entering your personal access key when buying this function.
9. Service Mode Start Up 1. Push the cursor key ↑ or ↓ to highlight Preset Inpu t Balance . (menu 9-34) 2. Press ENTER to selec t. The following warning will be displayed : (menu 9-35) Preset input balance is reserved to qualified s ervice personnel.
9. Service Mode 9.15 Diagnosis 9.15.1 How to start up the Diagnosis? What can be seen? The diagnosis menu gives the possibility to select an overview of the I 2 C controlled IC’s and an overview of the working of the formatter . Start up 1. Push the cursor key ↑ or ↓ to highlight Diagnosis .
9. Service Mode 9.15.3 Formatt er How to select t he overvi ew? 1. Push the cursor key ↑ or ↓ to highlight Forma tter . (menu 9-42) 2. Press ENTER to selec t.
9. Service Mode 9.15.6 V oltages How to select t he overvi ew? 1. Push the cursor key ↑ or ↓ to highlight Voltages . (menu 9-48) 2. Press ENTER to selec t.
10. Prog rammable Function Keys 10. PROGRAMMABLE FUNCTION KEYS 10.1 Function Keys What can be done with these keys? The five function keys on top of an adapted remote control can be programmed as short cut keys (quick access) to almost any adjustment menu.
10. Pr ogrammable Function Keys 120 R5976562 BARCOSLM G10 PERFOR MER 20/10/2004.
A. Standard Sou rce set up Files A. ST ANDARD SOURCE SET UP FILES A.1 T able overview T able over view The following standard source files are pre-programmed in the projector .
A. Standard Source set up Files Name 1 Resolu- tion 2 Fvert Hz 3 FHor kHz 4 Fpix MHz 5 Ptot 6 Pact 7 Ltot 8 Lact 9 MAC_3 512x384 60,147 24,4 80 15,667 640 512 407 384 MAC_4 560_384 60,147 24,480 17,2 .
A. Standard Sou rce set up Files Name 1 Resolu- tion 2 Fvert Hz 3 FHor kHz 4 Fpix MHz 5 Ptot 6 Pact 7 Ltot 8 Lact 9 SVGA_72V 800x600 72,084 48,0 80 50,003 1040 800 667 600 VGA_72V 640x480 72,800 37,8 .
A. Standard Source set up Files 124 R5976562 BARCOSLM G10 PERFOR MER 20/10/2004.
B. Cleaning the dust filter s B. CLEANING THE DUST FIL TERS W ARNING : As the p rojector has to be open ed, this proced ure has to be performed by qu alified service tech- nician. When should it be done? Depending on the environment, the dust filters should be cleaned at least when replacing the lamp.
B. Cleaning the dust filt ers Image B-1 Removing stacking sockets Image B-2 Input box slide out 126 R5976562 BARCOSLM G10 PERFOR MER 20/10/2004.
B. Cleaning the dust filter s Image B-3 Front screw top cover removal Image B-4 Dust filter removal How to cle an 1. Clean the dust filter with a d ry cloth or blow out with compressed air . Reinsert the dust filte rs and put the cover back on its place by fo llowing the opposit e procedure.
B. Cleaning the dust filt ers B.2 Dust filter on the back side Necessary t ools • Flat screwdriver • Philips screwdriver What should be done T o get access to the dust filters, the back cover must be removed. How to remove 1. Loosen the 3 screw on the back side.
B. Cleaning the dust filter s Image B-7 Dust filter removal Image B-8 Dust filter removal How to cle an 1. Clean the dust filter with a d ry cloth or blow out with compressed air . Reinsert the dust filters and put the cover b ack on its place by follow ing the opposite p rocedure.
B. Cleaning the dust filt ers Image B-9 Dust filter bo ttom side How to cle an 1. Clean the dust filter with a d ry cloth or blow out with compressed air .
Revision Sheet To : Barco nv Even ts/Documenta tion Noordlaan 5, B-8520 Kuurne Phone: +32 56.36.8 9.70, Fax: +32 56.36.88.24 E-mail: antoon.dejaegher@barco.
Un punto importante, dopo l’acquisto del dispositivo (o anche prima di acquisto) è quello di leggere il manuale. Dobbiamo farlo per diversi motivi semplici:
Se non hai ancora comprato il Barco R5976562 è un buon momento per familiarizzare con i dati di base del prodotto. Prime consultare le pagine iniziali del manuale d’uso, che si trova al di sopra. Dovresti trovare lì i dati tecnici più importanti del Barco R5976562 - in questo modo è possibile verificare se l’apparecchio soddisfa le tue esigenze. Esplorando le pagine segenti del manuali d’uso Barco R5976562 imparerai tutte le caratteristiche del prodotto e le informazioni sul suo funzionamento. Le informazioni sul Barco R5976562 ti aiuteranno sicuramente a prendere una decisione relativa all’acquisto.
In una situazione in cui hai già il Barco R5976562, ma non hai ancora letto il manuale d’uso, dovresti farlo per le ragioni sopra descritte. Saprai quindi se hai correttamente usato le funzioni disponibili, e se hai commesso errori che possono ridurre la durata di vita del Barco R5976562.
Tuttavia, uno dei ruoli più importanti per l’utente svolti dal manuale d’uso è quello di aiutare a risolvere i problemi con il Barco R5976562. Quasi sempre, ci troverai Troubleshooting, cioè i guasti più frequenti e malfunzionamenti del dispositivo Barco R5976562 insieme con le istruzioni su come risolverli. Anche se non si riesci a risolvere il problema, il manuale d’uso ti mostrerà il percorso di ulteriori procedimenti – il contatto con il centro servizio clienti o il servizio più vicino.
