Manuale d’uso / di manutenzione del prodotto Component Speaker del fabbricante Stuttgart
Vai alla pagina of 15
COMPONENT SPEAKERS AND CROSSOVERS COMPONENT SPEAKERS AND CROSSOVERS CONTENTS (Click on a topic to view) Congratulations N T - 1 T weeter Mounting Introduction Installation StudioDriver N T - 1 Install.
Congratulations Thank you for selecting STUDIODRIVER components. Manufactured in Stuttgart, Germany , technical innovations and high-tech processes are employed throughout our manufacturing process to help ensure many years of musical enjoyment.
Y our new STUDIODRIVER component set is part of an exciting line of loudspeakers. They are the definitive result of years of research and development, realized by the same engineering team charged wit.
2 STUDIODRIVER N T - 1 MOUNTING P ARAMETERS Mounting Hole for Recess Mount 2.125” Mounting Depth .675” - 1.1” T weeter Diameter 1.775” DESCRIPTION One Inch T itanium Dome T weeter Recommended frequency range 4 kHz - 22 kHz MECHANICAL P ARAMETERS Normal Power Handling 100W rms Fs 1600 Hz Re 3.
3 STUDIODRIVER MR-44 DESCRIPTION Four Inch Aluminum Cone Midwoofer Recommended frequency range 160 Hz - 8 kHz MECHANICAL P ARAMETERS Normal Power Handling 50W rms Fs 78.0 Hz Qms 2.74 V as 2.5 Liters Cms 0.78 mm/N Mms 5.3 grams Rms 0.950 kg/sec Xmax 5 mm Sd 48.
DESCRIPTION Five and one quarter Inch Aluminum Cone Midwoofer Recommended frequency range 90 Hz - 3.5 kHz MECHANICAL P ARAMETERS Normal Power Handling 100W rms Fs 62.0 Hz Qms 4.450 V as 6.9 Liters Cms 0.8 mm/N Mms 8.4 grams Rms 0.73 kg/sec Xmax 5 mm Sd 78.
DESCRIPTION Six and one half Inch Aluminum Cone Midbass Recommended frequency range 70 Hz - 3.5 kHz MECHANICAL P ARAMETERS Normal Power Handling 100W rms Fs 57.0 Hz Qms 4.130 V as 18.6 Liters Cms 0.730 mm/N Mms 18.8 grams Rms 0.93 kg/sec Xmax 5 mm Sd 135.
6 N T - 1 TWEETER ASSEMBL Y The tweeters are equipped with wires and attached connectors. The tweeter wires are designated solid black (-), and black with a white stripe (+). Locate the corresponding spade connectors from the hardware pack and crimp them to the end of your chosen speaker wire.
Configuring the NT -1 T weeter Choose the desired method of mounting the tweeters. The NT -1 tweeters can be surface or recess mounted while allowing rotation of the tweeter within the mount for optimal imaging. Surface Mounting Locate the disk designated "E" in the tweeter assembly drawing.
INST ALLA TION Mounting Considerations for your Midwoofers STUDIODRIVER component speakers are designed to mount into most factory speaker locations with minimum ef fort. The speaker baskets are designed to be a universal fit. When designing your system, a good rule of thumb is to mount the tweeter close to the midrange/midbass speaker .
INST ALLA TION Speaker W iring Locate the hardware pack supplied with your new component set. Inside you will find screws and crimp terminals. The midrange and midbass speakers are each equipped with a small and a large terminal. The large terminal is the positive (+) connection and the small terminal is the negative (-) connection.
10 FN-3 CROSSOVER FN-3 2wayCrossover INPUT WOOFER TWEETER + -- -2dB + 0dB - Connect to the amplifier (+) POSITIVE speaker output Connect to the amplifier (-) NEGA TIVE speaker output Connect to the Mi.
11 FN-6 CROSSOVER FN-6 -2dB 0 dB IN + + + - - -2dB 0 dB - - - - W oofer Midrange T weeter + Connect to the amplifier (+) POSITIVE speaker output Connect to the amplifier (-) NEGA TIVE speaker output C.
ADDITIONAL INFORMA TION NO TE: Abuse and/or Installation Error: STUDIODRIVER defines abuse as, but not limited to, burnt voice coils (blackened, no continuity , melted adhesives, coil separated from the former , etc.
Three-Y ear Limited U.S.A. Warranty This warranty gives you specific legal rights, and you may also have other rights which vary from state to state. StudioDriver warrants its products to be free from.
Un punto importante, dopo l’acquisto del dispositivo (o anche prima di acquisto) è quello di leggere il manuale. Dobbiamo farlo per diversi motivi semplici:
Se non hai ancora comprato il Stuttgart Component Speaker è un buon momento per familiarizzare con i dati di base del prodotto. Prime consultare le pagine iniziali del manuale d’uso, che si trova al di sopra. Dovresti trovare lì i dati tecnici più importanti del Stuttgart Component Speaker - in questo modo è possibile verificare se l’apparecchio soddisfa le tue esigenze. Esplorando le pagine segenti del manuali d’uso Stuttgart Component Speaker imparerai tutte le caratteristiche del prodotto e le informazioni sul suo funzionamento. Le informazioni sul Stuttgart Component Speaker ti aiuteranno sicuramente a prendere una decisione relativa all’acquisto.
In una situazione in cui hai già il Stuttgart Component Speaker, ma non hai ancora letto il manuale d’uso, dovresti farlo per le ragioni sopra descritte. Saprai quindi se hai correttamente usato le funzioni disponibili, e se hai commesso errori che possono ridurre la durata di vita del Stuttgart Component Speaker.
Tuttavia, uno dei ruoli più importanti per l’utente svolti dal manuale d’uso è quello di aiutare a risolvere i problemi con il Stuttgart Component Speaker. Quasi sempre, ci troverai Troubleshooting, cioè i guasti più frequenti e malfunzionamenti del dispositivo Stuttgart Component Speaker insieme con le istruzioni su come risolverli. Anche se non si riesci a risolvere il problema, il manuale d’uso ti mostrerà il percorso di ulteriori procedimenti – il contatto con il centro servizio clienti o il servizio più vicino.
