Manuale d’uso / di manutenzione del prodotto NETRS2321P del fabbricante StarTech.com
Vai alla pagina of 24
Manual Revision: 07/09/2013 For the most up-to-date information, please visit: www.startech.com DE: Bedienungsanleitung - de.startech.com FR: Guide de l'utilisateur - fr .startech.com ES: Guía del usuario - es.startech.com IT: Guida per l'uso - it.
Instruction Manual FCC C ompliance Statement This equipment has been tested and f ound to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules . These limits are desig ned to provide reasonable protection against harmful interference in a residential installation.
Instruction Manual i T able of C ontents Product Overview .................................................................................. 1 DIN Rail Mounting...........................................................................................
Instruction Manual ii Product Applications ............................................................................. 17 UDP ...........................................................................................................................
Instruction Manual 1 P roduc t Overview T op View Fron t View Rear View DIN rail screw hole Wall-moun t screw hole RS-232 DB9 male serial port DC Jack Load Default/Reset Button RJ45 10/100M Ethernet p.
Instruction Manual 2 DIN Rail Mounting Attach the included DIN Rail brackets (one per side) using the provided screw s to the top DIN Rail screw hole (marked in the above diagram), and clip t o your D.
Instruction Manual 3 Pin 1 TX+ 2 T X- 3 RX+ 6 RX- RJ45 Ethernet Pin Assignmen ts RS-232 DB9 Male Pin Assignment NOTE: This serial device ser ver performs as a DTE device.
Instruction Manual 4 Introduction Packaging C ontents • 1 x Serial over IP Device Server • 1 x Universal P ower Adapter (NA/UK/EU) • 1 x Software CD • 1 x Instruction Manual • 1 x DIN Rail Kit Installation W eb Brow ser Method 1. Plug in the power adapt er and connect the RJ45 inter face to y our LAN.
Instruction Manual 5 Broadcast Search The Broadcast Search function is used to locate all NETRS2321P devices that are connected to the same LAN as your computer .
Instruction Manual 6 W eb Console Opera tion Enter the IP address you ha ve set for the NETRS2321P device into your web bro wser address bar (default IP: 10.
Instruction Manual 7 Sy stem IP On this page, you can adjust the NETRS2321P network conguration. If set to DHCP mode, all other settings will be ignored , and the IP address will be assigned by DHCP server after resetting the device. Press “Update ” to store the data.
Instruction Manual 8 Load default setting On this page, you can load and stor e the fac tory default settings into EEPROM. NOTE: Network settings and M AC address will not be changed. Press “Load” to load default settings. Reset the device t o take eect.
Instruction Manual 9 T CP Mode NOTE: When T CP mode is set to Ser ver or Client mode , the UDP mode will be disabled automatically . When UDP mode is enabled , the T CP mode will be disabled automatically . Once you hav e completed making changes, press "Update" to store the data.
Instruction Manual 10 Reverse T elnet Reverse T elnet works the same as T elnet Ser ver mode . The T elnet por t is listens f or a connection after booting up. If you encounter err ors when using some T elnet clients, such as the Microsoft interpretation of T elnet for W indows XP you can try the connection using Reverse T elnet mode.
Instruction Manual 11 UDP Mode When UDP mode is enabled, TCP mode will be disabled automatically . I n UDP mode , the Local P or t will be assigned to this devic e. Y ou can list the remote connection IP and Port for up to 10 remot e devices. Once you hav e completed making changes, press "Update" to store the data.
Instruction Manual 12 UA R T U AR T or Univ ersal Asynchronous Receiver Transmitt er refers to the ‘RS-232 serial por t’ of the NETRS2321P . All of the por t settings are modied from this page . Once you hav e completed making changes, press "Update" to store the data.
Instruction Manual 13 Hardware F low Control Set the ow control mode of U ART inter face as enabled or as none . U ART M emory Overow count Shows the number of overow bytes in network buer . U ART FIFO O verow count Shows the number of overows counted in the U AR T RX buer .
Instruction Manual 14 Virtual C OM S oftware Opera tion The Virtual Com application lets you install and congure your NETRS2321P easily over the network. Five function groups are pr ovided to ease the installation process, allow COM mapping , and provide monitoring and IP location server functions.
Instruction Manual 15 C OM Mapping T o map a vir tual C OM por t, select COM Mapping fr om the lef t pane of the VCOM application, then click Add Click OK to create the C OM Mapping T CP/UDP Depending on the protocol you ar e using, the options below will enable/disable automatically as applicable.
Instruction Manual 16 Set the device to be a T elnet Client . In the case the Ethernet connected device is the T elnet ser ver or other NETRS2321P in server mode.
Instruction Manual 17 P roduc t A pplications UDP TC P TCP Server Mode.
Instruction Manual 18 Specications Connectors 1x DB-9 (9-pin; D-Sub) Male 1x RJ-45 Female Serial Protocol RS-232 Maximum Baud Rate 230400 Data Bits 5,6,7,8 Flow C ontrol RTS/CTS, None Parity Odd, Ev en, None, Space, Mark Stop Bits 1, 1.
Instruction Manual 19 T echnical Suppor t StarT ech.com’ s lifetime technical support is an integral part of our commitment to provide industry-leading solutions. If you ever need help with your pr oduc t, visit ww w .star tech.c om/suppor t and access our compr ehensive selection of online tools, documentation, and downloads.
Hard-to-nd made easy . At StarT ech.com, that isn ’t a slogan. It ’ s a promise. StarT ech.com is your one-stop source for every connectivity par t you need. F rom the latest technology to legacy products — and all the parts that bridge the old and new — we can help you nd the parts that connect your solutions.
Un punto importante, dopo l’acquisto del dispositivo (o anche prima di acquisto) è quello di leggere il manuale. Dobbiamo farlo per diversi motivi semplici:
Se non hai ancora comprato il StarTech.com NETRS2321P è un buon momento per familiarizzare con i dati di base del prodotto. Prime consultare le pagine iniziali del manuale d’uso, che si trova al di sopra. Dovresti trovare lì i dati tecnici più importanti del StarTech.com NETRS2321P - in questo modo è possibile verificare se l’apparecchio soddisfa le tue esigenze. Esplorando le pagine segenti del manuali d’uso StarTech.com NETRS2321P imparerai tutte le caratteristiche del prodotto e le informazioni sul suo funzionamento. Le informazioni sul StarTech.com NETRS2321P ti aiuteranno sicuramente a prendere una decisione relativa all’acquisto.
In una situazione in cui hai già il StarTech.com NETRS2321P, ma non hai ancora letto il manuale d’uso, dovresti farlo per le ragioni sopra descritte. Saprai quindi se hai correttamente usato le funzioni disponibili, e se hai commesso errori che possono ridurre la durata di vita del StarTech.com NETRS2321P.
Tuttavia, uno dei ruoli più importanti per l’utente svolti dal manuale d’uso è quello di aiutare a risolvere i problemi con il StarTech.com NETRS2321P. Quasi sempre, ci troverai Troubleshooting, cioè i guasti più frequenti e malfunzionamenti del dispositivo StarTech.com NETRS2321P insieme con le istruzioni su come risolverli. Anche se non si riesci a risolvere il problema, il manuale d’uso ti mostrerà il percorso di ulteriori procedimenti – il contatto con il centro servizio clienti o il servizio più vicino.
