Manuale d’uso / di manutenzione del prodotto EP30200 del fabbricante Stanley Black & Decker
Vai alla pagina of 20
© 2013 Stanley Black & Decker , Inc. New Britain, CT 06053 U.S.A. 69924 2-2015 V er-8 USER MANUAL Safety , Operation and Maintenance EP30200 ELECTRONIC PIN BRAZING UNIT EP30200.
2 ► EP30200 User Manual DECLARA TION OF CONFORMITY DECLARATION OF CONF ORM ITY ÜBEREINSTIMM UNGS - ERKLARUNG DECLARATION DE CONF ORMITE CEE DECLARACION DE CONFO RMIDAD DICHIARAZIONE DI CONFO RMITA .
EP30200 User Manual ◄ 3 SERVICING: This manual contains safety , operation, and routine maintenance instructions. Stanley Hydraulic T ools recommends that servicing of the unit, other than routine maintenance, must be performed by an authorized and certied dealer .
4 ► EP30200 User Manual Always observe safety symbols. They are included for your safety and for the protection of the tool. LOCAL SAFETY REGULA TIONS Enter any local safety regulations here. Keep these instructions in an area accessible to the operator and mainte- nance personnel.
EP30200 User Manual ◄ 5 T ool operators and maintenance personnel must always comply with the safety precautions given in this manual and on the stickers and tags attached to the tool and hose.
6 ► EP30200 User Manual WARNING Make sure battery charging is only accomplished in a well ventilated room. DO NOT PLACE THE CONTROL BOX ON T OP OF THE BA TTERIES. REMOVE THE BA TTERY BOX COVER. Battery charging produces explosive gases. A battery explosion can cause serious injuries.
EP30200 User Manual ◄ 7 OPERA TION PREP ARE THE RAIL SURF ACE Select the type and length of bonding cable to use for the bond and use it as a guide to determine where brazing points on the rail will be required.
8 ► EP30200 User Manual Pin Holder Ring Holder SWITCH Dial a. The ring holder is a "push t" to the gun. T o remove it from the gun, simply pull it away from the gun. b. The pin holder is threaded onto a threaded shaft in the gun and locked in place with a nut.
EP30200 User Manual ◄ 9 NOTE: The EP30 does not have a power switch. 1 1. Position the terminal lug of the bonding cable against the cleaned surface of the rail. Position the gun against the cable lug so that the brazing pin is at the top edge of the cable lug hole.
10 ► EP30200 User Manual PROBLEM CAUSE SOLUTION Brazing pin does not ignite or does not ignite long enough. Batteries not charged or are defective. T est batteries for proper charge. Replace and/or charge as necessary . Blown fuse. Check fuses. Magnetic ground faulty .
EP30200 User Manual ◄ 1 1 • Check that the pin holder is not burnt or not holding the pin tightly . If not, remove the ring holder , clean all the parts and squeeze the ngers of the pin holder together . • Check the cables on the gun from time to time for damage.
12 ► EP30200 User Manual EP30200 V oltage............................................................................................................................................................................................... 36V dc Approximate Number of Brazings per Battery Charge .
EP30200 User Manual ◄ 13 PIN & RING HOLDERS 35826 Pin Holder for Pinbrazing, 8-9,5 mm brazing pins. 35827 Pin Holder for Pinbrazing, M8 Threaded pins. 35828 Pin Holder for Pinbrazing, M10 Threaded pins. 35829 Pin Holder for Pinbrazing, M12 Threaded pins.
14 ► EP30200 User Manual BONDING CABLE WITH LUGS (for Pin Brazing) Part No. Description Brazing Pin Reqd 35845 1 AWG / 50 mm², 185 mm long, copper 35837 35844 4 AWG / 25 mm², 145 mm long, copper 3.
EP30200 User Manual ◄ 15 Fuses, Chargers, & Batteries Part No. Description 56557 Fuse, PCB EP30/60 56558 Fuse, Grinder Outlet EP30 56559 Fuse, Control Cable EP30 56560 Auto Fuse, 5A EP60 56561 Auto Fuse, 15A EP60 56562 Auto Fuse, 30A EP60 35866 Charger 36 VDC 7 AMP EP30/60 W/ Special DC plug.
16 ► EP30200 User Manual CABLES Part No. Description 35809 Ground Cable_____________________________________ 35806 Carrying Harness__________________________________ 35820 Extension Cable for Grindi.
EP30200 User Manual ◄ 17 GUNS Part No. Description BG10100 Pin Brazing Gun____________________________________ BG10101 Angle Head Gun____________________________________ Plugs Part No.
18 ► EP30200 User Manual A A 01 02 03 04 05 06 07 09 13 12 08 18 17 14 14 19 24 15 16 16 15 10 11 11 23 23 20 30 29 27 28 28 22 21 24 25 25 25 26 26 25 26 25 31 26 25 25 26 29 30 25 31 30 30 29 29 32 32 33 Electronic box for EP30 XC 34.
EP30200 User Manual ◄ 19 Item Part No. Qty Description 01 66838 1 FRAME EP30 02 66846 1 LABEL EP30 03 66839 1 CIRCUIT BOARD 04 66018 1 RELA Y 05 66840 1 CIRCUIT BOARD MOUNTING PLA TE 06 66841 1 RESI.
Stanley Hydraulic T ools 3810 SE Naef Road Milwaukie, Oregon 97267-5698 USA (503) 659-5660 / Fax (503) 652-1780 www .stanleyhydraulics.com.
Un punto importante, dopo l’acquisto del dispositivo (o anche prima di acquisto) è quello di leggere il manuale. Dobbiamo farlo per diversi motivi semplici:
Se non hai ancora comprato il Stanley Black & Decker EP30200 è un buon momento per familiarizzare con i dati di base del prodotto. Prime consultare le pagine iniziali del manuale d’uso, che si trova al di sopra. Dovresti trovare lì i dati tecnici più importanti del Stanley Black & Decker EP30200 - in questo modo è possibile verificare se l’apparecchio soddisfa le tue esigenze. Esplorando le pagine segenti del manuali d’uso Stanley Black & Decker EP30200 imparerai tutte le caratteristiche del prodotto e le informazioni sul suo funzionamento. Le informazioni sul Stanley Black & Decker EP30200 ti aiuteranno sicuramente a prendere una decisione relativa all’acquisto.
In una situazione in cui hai già il Stanley Black & Decker EP30200, ma non hai ancora letto il manuale d’uso, dovresti farlo per le ragioni sopra descritte. Saprai quindi se hai correttamente usato le funzioni disponibili, e se hai commesso errori che possono ridurre la durata di vita del Stanley Black & Decker EP30200.
Tuttavia, uno dei ruoli più importanti per l’utente svolti dal manuale d’uso è quello di aiutare a risolvere i problemi con il Stanley Black & Decker EP30200. Quasi sempre, ci troverai Troubleshooting, cioè i guasti più frequenti e malfunzionamenti del dispositivo Stanley Black & Decker EP30200 insieme con le istruzioni su come risolverli. Anche se non si riesci a risolvere il problema, il manuale d’uso ti mostrerà il percorso di ulteriori procedimenti – il contatto con il centro servizio clienti o il servizio più vicino.
