Manuale d’uso / di manutenzione del prodotto HX460S del fabbricante Standard Horizon
Vai alla pagina of 32
HX460S HX460S VHF/FM Marine Handheld Transceiver Owner's Manual VERTEX STANDARD CO., LTD. 4-8-8 Nakameguro, Meguro-Ku, Tokyo 153-8644, Japan Y AESU U.S.A. 17210 Edwards Rd., Cerritos, CA 90703, U.S.A. YAESU U.S.A. INTERNATIONAL DIVISION 8350 N.W.
HX460S TABLE OF CONTENTS FCC NOTICE ................................................................................................. 1 GENERAL INFORMATION ........................................................................... 2 INTRODUCTION ....
HX460S Congratulations on your purchase of the HX460S ! Whether this is your first portable marine VHF transceiver, or if you have other STANDARD HORI- ZON equipment, The STANDARD HORIZON organization.
HX460S 1. GENERAL INFORMATION 1.1 INTRODUCTION The HX460S is a miniature 5-Watt portable two-way VHF marine transceiver. The transceiver has 173 channels: 163 marine and 10 weather. The 163 marine channels are switchable to comply with USA, International, or Cana- dian regulations.
HX460S Page 3 2. ACCESSORIES 2.1 PACKING LIST When the package containing the transceiver is first opened, please check it for the following contents: • HX460S Transceiver • CNB460 1100 mAh Lithiu.
HX460S Page 4 3. CONTROLS AND INDICATORS NOTE This section defines each control of the transceiver. For detailed oper- ating instructions, refer to section 4 of this manual. Refer to Figure 1 for the location of the following controls, indicators, and connections.
HX460S Page 5 Figure 1 Controls and Connectors.
HX460S Page 6 DOWN ( q ) KEY Selects the desired channel. Each press decreases the channel num- ber. When held down, the channels decrease continuously. 16/9 KEY Immediately recalls channel 16 from any channel location. Holding down this key recalls channel 9.
HX460S Page 7 3.2 INDICATORS Figure 2 Indicators Channel Display The operating channel is shown on the LCD in both the transmission and reception mode s . When the optional SU-1 Barometric Pressure Sensor Unit is installed, the LCD may be configured to indicate the current Barometric Pressure.
HX460S Page 8 WX Indicator NOAA weather channel. MEM Indicator The channel is in the transceiver’s “S can M emory. ” Battery Indicator This indicator appears when the battery capacity is approximately 60%. When the battery capacity is approximately 10%, this indicator will blinks.
HX460S How to use the Quick Draw Belt Clip 1. Connect the hanger to the rear of the HX460S , using the supplied screw ( Figure 4-a ). Use only the screw included with the clip to mount the clip to the back of the transceiver! 2. Clip the Quick Draw Belt Clip to your belt ( Figure 4-b ).
HX460S Page 10 4.2 RECEPTION 1. Turn the POWER/VOLUME CONTROL knob clockwise to turn the trans- ceiver on. 2. Turn the SQUELCH CONTROL knob fully counterclockwise. This state is known as “ Squelch Off. ” 3. Turn up the POWER/VOLUME CONTROL knob until the noise or audio from the speaker is at a comfortable level.
HX460S Page 11 4.3 TRANSMISSION 1. Perform steps 1 through 7 of the RECEPTION discussion above . 2. Before transmitting, monitor the channel and make sure it is clear. THIS IS AN FCC REQUIREMENT! 3. For communications over short distances, press the H/L key until “ ” is displayed on the LCD.
HX460S Page 12 4.5 USA, CANADIAN, AND INTERNATIONAL BANDS 1. To change the operating band (channel set) of the transceiver, hold down the 16/9 key and press the WX key. The band will change from USA, to International, and to Canadian with each press. 2.
HX460S Page 13 6. Adjust the SQUELCH CONTROL knob until background noise is elimi- nated. 7. To start scanning, press the SCAN key. The scan proceeds from the lowest to the highest programmed channel number and stops on chan- nels when a transmission is received.
HX460S Page 14 4.9 NOAA WEATHER ALERT In the event of extreme weather disturbances such as storms and hurri- canes, NOAA (National Oceanic and Atmospheric Administration) sends a “weather alert” consisting of a 1050 Hz tone, followed by weather reports on the weather channels.
HX460S Page 15 4.12 OPERATING ON CHANNEL 13 Channel 13 is used at docks, bridges and for maneuvering in port. Mes- sages on this channel must concern navigation only, such as meeting and passing in restricted waters. In emergencies and when approaching blind river bends, high power is allowed.
HX460S Page 16 4.14.2 Operation Pressing the PRESET key toggles between Preset Channel A, b, C, d, E, and the last selected “regular” channel. Preset Channel A is represented by “A” to the left of the channel number on the LCD, and channel B is repre- sented by “b,” and so forth.
HX460S Page 17 4.16 BAROMETRIC PRESSURE METER The optional Barometric Pressure unit ( SU-1 ) brings to the HX460S the unique capability of providing readout of the current barometric pressure. The SU-1 unit requires calibration of the ‘offset’ parameters, so that the pressure reading will be correct.
HX460S Page 18 4.17 SETUP MODE The HX460S ’s Setup Mode allows a number of the HX460S operating pa- rameters to be custom-configured for your operating requirements. The Setup Mode is easy to activate and set, using the following procedure: 1. Turn the radio off.
HX460S Page 19 4.17.4 SCn ( S CAN D ISPLA Y ) Function : Select the display mode while scanning. Available Values : nor (Normal)/SPL (Special) Default : nor (Normal) nor (Normal) : Changes the channel number accordance with scanning SPL (Special) : The channel number does not change during scanning.
HX460S Page 20 4.18 CLONING The HX460S includes a convenient “Clone” feature, which allows the memory and configuration data from one transceiver to be transferred to another HX460S . Here is the procedure for Cloning one radio’s data to another: 1.
HX460S Page 21 4.19 RESETTING THE TRANSCEIVER’S MICROPROCESSOR Resetting the microprocessor restores the initial, factory-supplied conditions in the transceiver. These are called the “default” conditions. To reset the microprocessor, first turn the transceiver off.
HX460S Page 22 5. BATTERY The CNB460 is a high performance Lithium-Ion battery providing high ca- pacity in a very compact package. CAUTION To avoid risk of explosion and injury, CNB460 battery pack should only be removed, charged or recharged in non-hazardous environments.
HX460S 5.3 USING THE NC-72 BATTERY CHARGER 1. Turn the transceiver off. 2. Insert the miniature plug on the end of the NC-72 Battery Charger cable into the EXT DC jack of the transceiver. 3. Plug the NC-72 into a 120 VAC wall out- let. 4. The indicator will glow red, indicating that charging has begun.
HX460S 5.5 BATTERY SAFETY Battery packs for your transceiver contain Nickel-cadmium (Ni-Cd) batter- ies. This type of battery stores a charge powerful enough to be dangerous if misused or abused, especially when removed from the transceiver.
HX460S 6. MAINTENANCE For preventive maintenance and instructions on obtaining factory service, please refer to the OWNER’S MANUAL SUPPLEMENT. For general trouble- shooting, refer to this Troubleshooting Chart. Page 25 TROUBLESHOOTING CHART SYMPTON The SCAN key does not start the scan.
HX460S 7. SPECIFICATIONS 7.1 General Frequency range : TX: 156.025 - 157.425 MHz RX: 156.050 - 163.275 MHz Number of channels : All US, Canadian & International channels 10 weather channels Channel spacing : 25 kHz Modulation type : 16K0G3E Supply voltage : 7.
HX460S 7.3 Receiver Frequency range : 156.050 - 163.275MHz Circuit type : Double-conversion superheterodyne IFs : 1st: 21.7 MHz 2nd: 450 kHz Sensitivity : 0.2 µV 12 dB SINAD Adjacent channel selectivity : 70 dB I ntermodulation response : 70 dB Spurious response rejection : 70 dB Speaker impedance : 8 Ω AF output : 0.
HX460S MEMO.
HX460S.
HX460S E C 0 1 0 N 1 0 0 Copyright 2000 VERTEX STANDARD CO., LTD. All rights reserved. Printed in Japan No portion of this manual may be reproduced without the permission of VERTEX STANDARD CO.
Un punto importante, dopo l’acquisto del dispositivo (o anche prima di acquisto) è quello di leggere il manuale. Dobbiamo farlo per diversi motivi semplici:
Se non hai ancora comprato il Standard Horizon HX460S è un buon momento per familiarizzare con i dati di base del prodotto. Prime consultare le pagine iniziali del manuale d’uso, che si trova al di sopra. Dovresti trovare lì i dati tecnici più importanti del Standard Horizon HX460S - in questo modo è possibile verificare se l’apparecchio soddisfa le tue esigenze. Esplorando le pagine segenti del manuali d’uso Standard Horizon HX460S imparerai tutte le caratteristiche del prodotto e le informazioni sul suo funzionamento. Le informazioni sul Standard Horizon HX460S ti aiuteranno sicuramente a prendere una decisione relativa all’acquisto.
In una situazione in cui hai già il Standard Horizon HX460S, ma non hai ancora letto il manuale d’uso, dovresti farlo per le ragioni sopra descritte. Saprai quindi se hai correttamente usato le funzioni disponibili, e se hai commesso errori che possono ridurre la durata di vita del Standard Horizon HX460S.
Tuttavia, uno dei ruoli più importanti per l’utente svolti dal manuale d’uso è quello di aiutare a risolvere i problemi con il Standard Horizon HX460S. Quasi sempre, ci troverai Troubleshooting, cioè i guasti più frequenti e malfunzionamenti del dispositivo Standard Horizon HX460S insieme con le istruzioni su come risolverli. Anche se non si riesci a risolvere il problema, il manuale d’uso ti mostrerà il percorso di ulteriori procedimenti – il contatto con il centro servizio clienti o il servizio più vicino.