Manuale d’uso / di manutenzione del prodotto CP-X809 del fabbricante SRS Labs
Vai alla pagina of 77
1 Projector CP-X809 User's Manual (detailed) – Oper a ting Guide Thank you for purchasing this projector . ►Before using this product, please read the "User's Manual - Safety Guide" and related manuals to ensure the proper use of this product.
2 Contents Contents About this manual ........... 1 Contents . ................. 2 Projector features .......... . 3 Prepar ations ............... 3 Contents of package ............. 3 Fastening the lens cover .......... 3 Par t names . ..............
3 Projector features / Prepar ations • Keep the original packing materials for future reshipment. Be sure to use the original packing materials when moving the projector .
4 Par t names Part names Pr ojector (1) Speakers (x 4) ( 38 ) (2) Focus ring ( 20 ) (3) Zoom ring ( 20 ) (4) Lamp cover ( 65 ) The lamp unit is inside.
5 Par t names Contr ol panel (1) ST ANDBY/ON button ( 17 ) (2) MENU button ( 24 ) It consists of four cursor buttons. (3) INPUT button ( 18 ) (4) POWER indicator ( 17, 71 ) (5) TEMP in.
6 Par t names R emote control (1) Laser pointer ( 14 ) It is a beam outlet. (2) LASER INDICA TOR ( 14 ) (3) LASER button ( 14 ) (4) ST ANDBY/ON button ( 17 ) (5) VOLUME+/- buttons ( .
7 Setting up Setting up Install the projector according to the environment and manner the projector will be used in. ►Place the projector in a stable horizontal position. If the projector falls or is knocked over , it could cause injury and/or damage to the projector .
8 Setting up Ar r angement Refer to the illustrations and tables below to determine screen size and projection distance. The values shown in the table are calculated for a full size screen: 1024×768 (a) Screen size (diagonal) (b) Projection distance (±10%) (c) Screen height (±10%), when the vertical lens shift ( 20 ) is set full upward.
9 Setting up Adjusting the pr ojector's ele va tor When the place to put the projector is slightly uneven to the left or right, use the elevator feet to place the projector horizontally .
10 Setting up Connecting y our de vices Be sure to read the manuals for devices before connecting them to the projector . Make sure that all the devices are suitable to be connected with this product, and prepare the cables required to connect. Please refer to the following illustrations to connect them.
11 Setting up Connecting your devices (continued) • Be sure to read the manuals for devices before connecting them to the projector , and make sure that all the devices are suitable to be connected with this product. Before connecting to a PC, check the signal level, the signal timing, and the resolution.
12 Setting up Using a USB stor age Inser ting the SD car d In order to view images stored in an SD storage, such as an SD memory card, insert the device into the SD card slot.
13 Setting up Connecting po wer supply 1. Connect the connector of the power cord to the AC IN (AC inlet) of the projector . 2. Firmly plug the power cord's plug into the outlet. ►Please use extra caution when connecting the power cord, as incorrect or faulty connections may result in fire and/or electrical shock.
14 R emote control Remote control Laser pointer This remote control has a laser pointer in place of a finger or rod. The laser beam works and the LASER INDICA TOR lights while the LASER button is pressed. ►The laser pointer of the remote control is used in place of a finger or rod.
15 R emote control Approx. 3 m 30º 30º 30º 30º Approx. 3 m 20º 20º Approx. 3 m About the r emote control signal The remote control works with the projector ’s remote sensors. This projector has three remote sensors on the front, on the top, and on the back.
16 R emote control Using as a wir ed remote contr ol The accessory remote control works as a wired remote control, when the wired control port at the bottom of the remote control connects with the REMOTE CONTROL port on the back of the projector via an audio cable with 3.
17 Projector features / Prepar ations P ow er on/of f BLANK LASER ASPECT PUSH ENTER PAGE UP LASER INDICATOR MY SOURCE/ DOC.CAMERA SEARCH STANDBY/ON VIDEO RGB PAGE DOWN ESC MENU RESET POSITION AUTO MAGNIFY ON OFF MY BUTTON 1 2 VOLUME + - FREEZE KEYSTONE MUTE 1.
18 Operating LASER INDICATOR MY SOURCE/ DOC.CAMERA STANDBY/ON VIDEO RGB ON OFF 1 2 + - FREEZE KEYSTONE MUTE T empor aril y muting the sound ESC MENU RESET POSITION AUTO MAGNIFY ON OFF MY BUTTON 1 2 VOLUME + - RGB 1 RGB 2 HDMI MIU VIDEO S-VIDEO COMPONENT (Y , C B /P B , C R /P R ) Operating 1.
19 Operating LASER INDICATOR MY SOURCE/ DOC.CAMERA SEARCH STANDBY/ON VIDEO RGB LASER INDICATOR MY SOURCE/ DOC.CAMERA STANDBY/ON VIDEO RGB 1. Press the VIDEO button on the remote control to select an input for video signal. Each time you press the button, the projector switches its video input port as below .
20 Operating PUSH ENTER PAGE UP PAGE DOWN ESC MENU RESET POSITION AUTO MAGNIFY MY BUTTON VOLUME • When the vertical lens shift is adjusted, it is recommended to shift the picture upward. NO TE 1. Use the zoom ring to adjust the screen size. Adjusting the zoom and f ocus 2.
21 Operating OFF 2 - FREEZE KEYSTONE MUTE PUSH ENTER PAGE UP PAGE DOWN ESC MENU RESET POSITION AUTO MAGNIFY MY BUTTON VOLUME 1. Press the POSITION button on the remote control when no menu is indicated. The “POSITION” indication will appear on the screen.
22 Operating MAGNIFY ON OFF MY BUTTON 1 2 VOLUME + - FREEZE KEYSTONE MUTE ESC MENU RESET POSITION AUTO MAGNIFY ON OFF MY BUTTON 1 2 VOLUME + - FREEZE KEYSTONE MUTE • The zoom level can be finely adjusted. Closely watch the screen to find the level you want.
23 Operating BLANK LASER MY SOURCE/ DOC.CAMERA SEARCH 1. Press the BLANK button on the remote control. The blank screen will be displayed instead of the screen of input signal. Please refer to the BLANK item in SCREEN menu ( 39 ). T o exit from the blank screen and return to the input signal screen, press the BLANK button again.
24 Operating BLANK LASER ASPECT PUSH ENTER PAGE UP LASER INDICATOR MY SOURCE/ DOC.CAMERA SEARCH STANDBY/ON VIDEO RGB PAGE DOWN ESC MENU RESET POSITION AUTO MAGNIFY ON OFF MY BUTTON 1 2 VOLUME + - FREEZE KEYSTONE MUTE PUSH ENTER PAGE UP PAGE DOWN ESC MENU RESET POSITION AUTO MAGNIFY MY BUTTON VOLUME 1.
25 EASY MENU EASY MENU From the EASY MENU, items shown in the table below can be performed. Select an item using the ▲/▼ cursor buttons on the projector or remote control. Then perform it according to the following table. Item Description ASPECT Using the ◄/► buttons switches the mode for aspect ratio.
26 EASY MENU EASY MENU (continued) Item Description BRIGHTNESS Using the ◄/► buttons adjusts the brightness. See the BRIGHTNESS item in PICTURE menu ( 27 ). CONTRAST Using the ◄/► buttons adjusts the contrast. See the CONTRAST item in PICTURE menu ( 27 ).
27 PICTURE menu PICTURE menu From the PICTURE menu, items shown in the table below can be performed. Select an item using the ▲/▼ cursor buttons on the projector or remote control, and press the ► cursor button on the projector or remote control, or the ENTER button on the remote control to execute the item.
28 PICTURE menu PICTURE menu (continued) Item Description COLOR TEMP Using the ▲/▼ buttons switches the color temperature mode. T o adjust CUSTOM Selecting a mode whose name includes CUSTOM and then pressing the ► button or the ENTER button displays a dialog to aid you in adjusting the OFFSET and GAIN of the selected mode.
29 PICTURE menu PICTURE menu (continued) Item Description ACTIVE IRIS Using the ▲/▼ cursor buttons changes the active iris control mode. PRESENT A TION THEA TER TURN OFF Feature PRESENT A TION The active iris displays the best presentation image for both bright and dark scenes.
30 IMAGE menu IMAGE menu From the IMAGE menu, items shown in the table below can be performed. Select an item using the ▲/▼ cursor buttons on the projector or remote control, and press the ► cursor button on the projector or remote control, or ENTER button on the remote control to execute the item.
31 IMAGE menu IMAGE menu (continued) Item Description H PHASE Using the ▲/▼ buttons adjusts the horizontal phase to eliminate flicker . Right Left • This item can be selected only for an RGB signal or a component video signal. (except 480i@60, 576i@50, SCART RGB input.
32 INPUT menu INPUT menu From the INPUT menu, items shown in the table below can be performed. Select an item using the ▲/▼ cursor buttons on the projector or remote control, and press the ► cursor button on the projector or remote control, or ENTER button on the remote control to execute the item.
33 INPUT menu INPUT menu (continued) Item Description COMPONENT Using the ▲/▼ buttons switches the function of the COMPONENT (Y , C B /P B , C R /P R ) port. COMPONENT SCAR T RGB When the SCART RGB is selected, the COMPONENT (Y , C B / P B , C R /P R ) and VIDEO ports will function as a SCART RGB port.
34 INPUT menu INPUT menu (continued) Item Description FRAME LOCK Set the frame lock function on/off for each port. (1) Use the ▲/▼ buttons to select one of following ports. QUIT RGB1 RGB2 HDMI (2) Use the ◄/► buttons to turns the frame lock function on/off .
35 INPUT menu INPUT menu (continued) Item Description RESOLUTION The resolution for the RGB1 and RGB2 input signals can be set on this projector . (1) In the INPUT menu select the RESOLUTION using the ▲/▼ buttons and press the ► button. The RESOLUTION menu will be displayed.
36 SETUP menu SETUP menu From the SETUP menu, items shown in the table below can be performed. Select an item using the ▲/▼ cursor buttons on the projector or remote control, and press the ► cursor button on the projector or remote control, or the ENTER button on the remote control to execute the item.
37 SETUP menu SETUP menu (continued) Item Description KEYSTONE Using the ▲/▼ buttons corrects the horizontal keystone distortion. Shrink the right of the image Shrink the left of the image • The adjustable range of this function will vary among inputs.
38 A UDIO menu Item Description VOLUME Using the ▲/▼ buttons adjusts the volume. High Low TREBLE Using the ▲/▼ buttons adjusts the treble level. High Low BASS Using the ▲/▼ buttons adjusts the bass level. High Low SRS WOW Using the ▲/▼ buttons switches the mode for SRS WOW mode.
39 SCREEN menu SCREEN menu From the SCREEN menu, items shown in the table below can be performed. Select an item using the ▲/▼ cursor buttons on the projector or remote control, and press the ► cursor button on the projector or remote control, or ENTER button on the remote control to execute the item.
40 SCREEN menu SCREEN menu (continued) Item Description ST ART UP Using the ▲/▼ buttons switches the mode for the start-up screen. The start-up screen is a screen displayed when no signal or an unsuitable signal is detected. MyScreen ORIGINAL TURN OFF Feature MyScreen Screen can be registered by the MyScreen item ( 41 ) .
41 SCREEN menu SCREEN menu (continued) Item Description MyScreen This item allows you to capture an image for use as a MyScreen image which can be used as the BLANK screen and ST AR T UP screen. Display the image you want to capture before executing the following procedure.
42 SCREEN menu SCREEN menu (continued) Item Description MESSAGE Using the ▲/▼ buttons turns on/off the message function. TURN ON TURN OFF When the TURN ON is selected, the following message function works.
43 SCREEN menu SCREEN menu (continued) Item Description TEMPLA TE Using ▲/▼ buttons switches the mode for the template screen. The selected template pattern can be displayed when the MY BUTT ON allocated to the TEMPLA TE function is pressed ( 46 ).
44 OPTION menu OPTION menu From the OPTION menu, items shown in the table below can be performed. Select an item using the ▲/▼ cursor buttons on the projector or remote control, and press the ► .
45 OPTION menu OPTION menu (continued) Item Description AUTO OFF Using the ▲/▼ buttons adjusts the time to count down to automatically turn the projector off. Long (max. 99 minutes) Short (min. 0 minute = DISABLE) When the time is set to 0, the projector is not turned off automatically .
46 OPTION menu OPTION menu (continued) Item Description MY BUTT ON This item is to assign one of the following function to MY BUTT ON 1 and 2 on the remote control ( 6 ). Choose 1 or 2 on the MY BUTT ON menu using the ◄/► button first. Then using the ▲/▼ buttons sets one of the following functions to the chosen button.
47 OPTION menu OPTION menu (continued) Item Description SERVICE (continued) F ANSPEED Using the ▲/▼ buttons switches the rotation speed of the cooling fans. The HIGH is the mode for use at highlands etc. Note that the projector is noisier when the HIGH is selected.
48 OPTION menu OPTION menu (continued) Item Description SERVICE (continued) KEY LOCK Using the ▲/▼ buttons turns on/off the key lock feature. When TURN ON is selected, the buttons on the projector except the ST ANDBY/ON button are locked. TURN ON TURN OFF • Please use to avoid a mischief and touching accidentally .
49 OPTION menu OPTION menu (continued) Item Description SECURITY This projector is equipped with security functions. User registration is required before using the security functions. Please contact your local dealer . 1. Using Security Features 1.1 Inputting the P ASSWORD 1.
50 OPTION menu OPTION menu (continued) Item Description SECURITY (continued) 2. Using the MyScreen P ASSWORD Function The MyScreen P ASSWORD function can be used to prohibit access to the MyScreen function and prevent the currently registered MyScreen image from being overwritten.
51 OPTION menu OPTION menu (continued) Item Description SECURITY (continued) 3. Using the PIN LOCK Function PIN LOCK is a function which prevents the projector from being used unless a registered Code is input.
52 OPTION menu OPTION menu (continued) Item Description SECURITY (continued) 4. Using the T ransition Detector Function While the T ransition Detector function is ON, when power switch is started to supply to the projector , it might react as below .
53 OPTION menu OPTION menu (continued) Item Description SECURITY (continued) 4.4 If you have forgotten your P ASSWORD 4.4-1 Follow the procedure in 4.1-1 to display the T ransition Detector on/off menu. 4.4-2 Select TURN OFF to display the ENTER P ASSWORD BOX (large).
54 OPTION menu OPTION menu (continued) Item Description SECURITY (continued) 5.3 T urning on the MY TEXT P ASSWORD The MY TEXT P ASSWORD function can prevent the MY TEXT from being overwritten.
55 MIU menu The MIU (Multi Information processing Unit) is a function to support the Network features and PC-LESS Presentation. Consult with your network administrator before connecting to an existing access point on your network. Incorrect network settings on this projector may cause trouble on the network.
56 MIU menu MIU menu (continued) (continued on next page) Item Description LIVE MODE SETTING (continued) MUL TI PC MODE The projector supports the Single PC mode that displays an image on full screen sent by 1 PC, and the Multi PC mode that divides the screen into 4 zone and displays images in each zone sent by up to 4 PCs.
57 MIU menu MIU menu (continued) Item Description PC-LESS PRESENT A TION Selecting this item displays the PC-LESS PRESENT A TION menu. Using the menu is able to make the projector display the images stored in an SD memory card or a USB memory , and realizes a presentation without a PC.
58 MIU menu MIU menu (continued) Item Description SETUP Selecting this item displays the MIU SETUP menu. Use the ▲/▼ buttons to select an item, and the ► or ENTER button on the remote control to perform the item. DHCP (Dynamic Host Configuration Protocol) Use the ▲/▼ buttons to turn DHCP on/of f.
59 MIU menu MIU menu (continued) Item Description SETUP (continued) TIME DIFFERENCE Use the ▲/▼ buttons to enter the TIME DIFFERENCE. Set the same TIME DIFFERENCE as the one set on your PC. If unsure, consult your IT manager . Use the ◄ button to return to the menu after setting the TIME DIFFERENCE.
60 MIU menu MIU menu (continued) Item Description SETUP (continued) SSID Use the ▲/▼ buttons to select the SSID to display the SSID menu. DEF AUL T Pressing the ► or ENTER button when one of the DEF AUL T (#1~#4) is selected. CUSTOM Press the ► or ENTER button when the # 5 CUSTOM is selected.
61 MIU menu MIU menu (continued) Item Description SETUP (continued) SPEED Use the ▲/▼ buttons to select the transfer rate. (M : Mbps : Megabits per second) AUTO 54M 48M 36M 24M 18M 1M 2M 5.5M 6M 9M 11 M 12M • The AUT O mode automatically selects the optimum rate.
62 MIU menu MIU menu (continued) Item Description MY IMAGE Selecting this item displays the MY IMAGE menu. Insert the SD memory card or USB memory into the projector before you use the MY IMAGE function ( 12 ). The application software “PJT ransfer” is required to store image(s) into the projector .
63 MIU menu MIU menu (continued) Item Description INFORMA TION Selecting this item displays the MIU-INFORMA TION- dialog for confirming the network settings. • The PROJECT OR NAME is displayed. • Nothing (blank) is shown in the “PROJECTOR NAME” and “SSID” field until you setup those items.
64 C.C . (Closed Caption) menu The closed caption setting can be changed through C.C. menu in the advance menu. Please select the item that you will change using ▲/▼ cursor buttons.
65 Maintenance Maintenance A lamp has finite product life. Using the lamp for long periods of time could cause the pictures darker or the color tone poor . Note that each lamp has a different lifetime, and some may burst or burn out soon after you start using them.
66 Maintenance Lamp war ning HIGH VOL T AGE HIGH TEMPERA TURE HIGH PRESSURE WARNING • If the lamp should break (it will make a loud bang when it does), unplug the power cord from the outlet, and make sure to request a replacement lamp from your local dealer .
67 Maintenance (1) Press the MENU button to display a menu. (2) Point at the “FIL TER TIME” using the ▼/▲ button, then press the ► button. A dialog will appear . (3) Press the ▲ button to select RESET on the dialog. It performs resetting the filter time.
68 Maintenance Consumption of the battery makes the clock not to work correctly . When the clock is wrong or it has stopped, please replace the battery according to the following procedures. Inter nal c lock ba tter y ►Always handle the batteries with care and use them only as directed.
69 Maintenance Other car e In order to ensure the safe use of your projector , please have it cleaned and inspected by your dealer about once every year . 1. T urn the projector of f, and unplug the power cord. Allow the projector to cool sufficiently .
70 T roubleshooting T roubleshooting R ela ted messages When the unit's power is on, messages such as those shown below may be displayed. When any such message is displayed on the screen, please follow the instructions described below .
71 T roubleshooting R e gar ding the indicator lamps Lighting and flashing of the POWER indicator , the LAMP indicator , and the TEMP indicator have the meanings as described in the table below .
72 T roubleshooting • When the interior portion has become overheated, for safety purposes, the power source is automatically turned off, and the indicator lamps may also be turned off. In such a case, press the “ O” (OFF) side of the power switch, and wait at least 45 minutes.
73 T roubleshooting Phenomena tha t may be easy to be mistak en f or mac hine def ects ► Never use the projector if abnormal operations such as smoke, strange odor , excessive sound, damaged casing or elements or cables, penetration of liquids or foreign matter , etc.
74 T roubleshooting Phenomena that may be easily mistaken for machine defects (continued) (Continued on next page) Phenomenon Cases not involving a machine defect Reference page Sound does not come out. The signal cables are not correctly connected. Correctly connect the audio cables.
75 T roubleshooting Phenomena that may be easily mistaken for machine defects (continued) • Although bright spots or dark spots may appear on the screen, this is a unique characteristic of liquid crystal displays, and it does not constitute or imply a machine defect.
76 War ranty and after-ser vice / Specifications W arranty and after-service If a problem occurs with the equipment, first refer to the “T roubleshooting” and run through the suggested checks. If this does not resolve the problem, please contact your dealer or service company .
77 Specifications Specifications (continued) [unit: mm] 418 319 154 139 AC IN I O LAN VIDEO CONTROL AUDIO IN1 AUDIO IN2 AUDIO OUT RGB OUT RGB1 RGB2 HDMI R L R L AUDIO IN3 AUDIO IN4 C B /P B Y C R /P R B/C B /P B R/C R /P R G/Y H V USB REMOTE CONTROL S-VIDEO AUX I/O DC 5V 0.
Un punto importante, dopo l’acquisto del dispositivo (o anche prima di acquisto) è quello di leggere il manuale. Dobbiamo farlo per diversi motivi semplici:
Se non hai ancora comprato il SRS Labs CP-X809 è un buon momento per familiarizzare con i dati di base del prodotto. Prime consultare le pagine iniziali del manuale d’uso, che si trova al di sopra. Dovresti trovare lì i dati tecnici più importanti del SRS Labs CP-X809 - in questo modo è possibile verificare se l’apparecchio soddisfa le tue esigenze. Esplorando le pagine segenti del manuali d’uso SRS Labs CP-X809 imparerai tutte le caratteristiche del prodotto e le informazioni sul suo funzionamento. Le informazioni sul SRS Labs CP-X809 ti aiuteranno sicuramente a prendere una decisione relativa all’acquisto.
In una situazione in cui hai già il SRS Labs CP-X809, ma non hai ancora letto il manuale d’uso, dovresti farlo per le ragioni sopra descritte. Saprai quindi se hai correttamente usato le funzioni disponibili, e se hai commesso errori che possono ridurre la durata di vita del SRS Labs CP-X809.
Tuttavia, uno dei ruoli più importanti per l’utente svolti dal manuale d’uso è quello di aiutare a risolvere i problemi con il SRS Labs CP-X809. Quasi sempre, ci troverai Troubleshooting, cioè i guasti più frequenti e malfunzionamenti del dispositivo SRS Labs CP-X809 insieme con le istruzioni su come risolverli. Anche se non si riesci a risolvere il problema, il manuale d’uso ti mostrerà il percorso di ulteriori procedimenti – il contatto con il centro servizio clienti o il servizio più vicino.
