Manuale d’uso / di manutenzione del prodotto HTINTD8W del fabbricante Speco Technologies
Vai alla pagina of 44
INSTR UCTION MANU AL 650Line Intensier3™ Series Speco T echnologies is constantly de veloping pr oduct impr o vements. W e r eserve the right to modify pr oduct design and specifications without notice and without incurring any obligation.
Contents 1 ◑ Contents ...................................................... 1 ◑ Precautions ................................................. 2, 3 ◑ Safety Instructions ...................................... 4 ◑ Package Contents .
2 Precautions Do not install the camera in extreme temperature conditions. Do not touch the front lens of the camera. Never keep the camera pointed directly at strong light. Do not expose the camera to radioactivity . Do not install the camera under unstable lighting conditions.
3 CA UTION RISK OF ELECTRIC SHOCK DO NOT OPEN CAUTION:T O REDUCE T HE RISK OF ELECTRIC SHOC K DO NOT REMOVE COVER(OR BACK). NO USER-SERVICEABLE PA RT S INSIDE . REFER SER VICING T O QUALIFIED SER VICE PERSONNEL. ISO14001 CA UTION RISK OF ELECTRIC SHOCK DO NOT OPEN CAUTION:T O REDUCE T HE RISK OF ELECTRIC SHOC K DO NOT REMOVE COVER(OR BACK).
4 Safety Instructions Pr ecautions f or use Please handle this camer a car efully : ◑ This camera should be installed by qualied personnel only ◑ There are no user serviceable parts inside ◑ .
5 Package Contents Please make sure that the following items are included in the Package: 1) HT7246IHR, HT7247IHR, HT7250IHR • 1 V ideo T est Connector , P ower J ack • 1 Chameleon Cover • 1 Wre.
6 CAMERA INST ALLA TION jv uul j{ Gw v~ ly Gj hi sl G XU G~ ol uG |z pu nG XYG }v s{ zG kj GO G G WWG hP G YU G~ ol uG |z pu nG Y[G }v s{ zG hj GO.
7 CAMERA INST ALLA TION Compatibility 1) HT7246IHR, HT7247IHR, HT7250IHR 2) HTINTB8, HTINTB9, HTINTB10 INTWM CVCJBB INTPM INTJBS CVCJBD INTCM DFM.
8 CAMERA INST ALLA TION Compatibility 3) HTINTD8, HTINTD9, HTINTD10 4) CVC6245IHR, CVC6246IHR INTWM DFM INTPM JB03TG.
CAMERA INST ALLA TION 9 1. HT7246IHR / HT7247IHR / HT7250IHR CA UTION : The installation instructions in this manual are for use by qualified service personnel only . T o reduce the risk of electric shock, do not perform any servicing other than that contained in the operating instructions unless you are qualified to do so .
CAMERA INST ALLA TION 10 2. HTINTB8, HTINTB9, HTINTB10 CAMERA ASSEMBL Y HEXAGON SOCKET SCREW M5X10, 4EA T APPING SCREW 4X25, 4EA BASE ADAPTOR BRACKET.
CAMERA INST ALLA TION 11 3. HTINTD8, HTINTD9, HTINTD10 DOME BASE HEXAGON SOCKET SCREW M6X20, 2EA DOME ASSEMBL Y DOME BODY T APPING SCREW 4X25, 3EA.
CAMERA INST ALLA TION 12 4. HT647HR TP T APPING SCREW 3X40, 3EA BODY & DOME COVER ASSEMBL Y BASE & ROT A TE BRACKET ASSEMBL Y.
CAMERA INST ALLA TION 13 5. CVC6245IHR, CVC6246IHR T APPING SCREW 4X20, 2EA DOME COVER ASSEMBL Y BASE ASSEMBL Y.
14 SPECIFICATIONS 650 Line Intensifier3 (W eatherproof Dome Camera with Chameleon™ Cover) DC Auto Iris V arifocal Lens 2.8-12mm / 9-22mm / 5-50mm MODEL HT7246IHR / HT7247IHR / HT7250IHR 1/3” Sony Super HAD ll CCD NTSC, P AL NTSC=811(H) * 508(V) / P AL=795(H) * 596(V) NTSC=768(H) * 494(V) / P AL=752(H) * 582(V) NTSC=15.
15 650 Line Intensifier3 (W eatherproof Bullet Camera with mount plate) DC Auto Iris V arifocal Lens 2.8-12mm / 5-50mm / 9-22mm HTINTB8 / HTINTB8W (2.8-12mm) HTINTB9 / HTINTB9W (5-50mm) HTINTB10 / HTI.
16 650 Line Intensifier3 (W eatherproof Dome Camera) DC Auto Iris V arifocal Lens 2.8-12mm / 5-50mm / 9-22mm HTINTD8 / HTINTD8W (2.8-12mm) HTINTD9 / HTINTD9W (5-50mm) HTINTD10 / HTINTD10W (9-22mm) ■.
17 650 Line Intensifier3 (Miniature W eatherproof Dome Camera with Chameleon™ Cover) 3.6mm F ixed Board Lens HT647HRTP (3.6 F ixed Board Lens) ■ SPECIFICATIONS MODEL HT647HR TP 1/3” Sony Super HAD ll CCD NTSC, P AL NTSC=811(H) * 508(V) / P AL=795(H) * 596(V) NTSC=768(H) * 494(V) / P AL=752(H) * 582(V) NTSC=15.
18 650 Line Intensifier3 (Indoor W all & Ceiling Mount Dome Camera) DC Auto Iris V arifocal Lens 2.8-12mm CVC6245IHR / CVC6245IHRW (2.8-12mm) ■ SPECIFICATIONS MODEL CVC6245IHR / CVC6245IHRW 1/3” Sony Super HAD ll CCD NTSC, P AL NTSC=811(H) * 508(V) / P AL=795(H) * 596(V) NTSC=768(H) * 494(V) / P AL=752(H) * 582(V) NTSC=15.
19 650 Line Intensifier3 (Indoor W all & Ceiling Mount Dome Camera) DC Auto Iris V arifocal Lens 2.8-12mm CVC6246IHR / CVC6246IHRW (2.8-12mm) ■ SPECIFICATIONS MODEL CVC6246IHR / CVC6246IHRW 1/3” Sony Super HAD ll CCD NTSC, P AL NTSC=811(H) * 508(V) / P AL=795(H) * 596(V) NTSC=768(H) * 494(V) / P AL=752(H) * 582(V) NTSC=15.
20 650 Line Intensifier3 (T raditional Box type Camera) C&CS Mount Lens HTINTT5 (C&CS Mount Lens) ■ SPECIFICATIONS MODEL HTINTT5 1/3” Sony Super HAD ll CCD NTSC, P AL NTSC=811(H) * 508(V) / P AL=795(H) * 596(V) NTSC=768(H) * 494(V) / P AL=752(H) * 582(V) NTSC=15.
21 CAMERA DIMENSION 1) HT7246IHR, HT7247IHR, HT7250IHR 2) HTINTB8, HTINTB9, HTINTB10 1.16” 5.10” dia 5.10” dia 3.93” dia 3.46” 3.46” 4.01” 3.
22 CAMERA DIMENSION 3) HTINTD8, HTINTD9, HTINTD10 4) HT647HR TP 5.47” dia 4.36” 3.34” 3.70” 1.41” 4.33” dia 3.22” dia 4.33” dia 3.14”.
23 CAMERA DIMENSION 5) CVC6245IHR, CVC6246IHR 6) HTINTT5 1.25” 4.09” 5.51” dia 4.60” dia 5.51” dia 2.51” 3.46” 3.26” 2.20” 1.49” dia.
24 FEA TURES Now with “PRESETS” PRESETS (Outdoor , Indoor , Elevator , Lobby , Hallway & Low Light) Used for a quick and easy setup for the installation environment. 650TVL Resolution Horizontal resolution of 650 TV lines is achieved by using a SONY Super-HAD CCD with 410,000 pixels, and a custom DSP yielding pictures with a high S/N ratio.
25 FEA TURES Motion Detection with Alarm Output Built in motion detector with adjustable areas of coverage will Send a signal to an external alarm device when motion is detected. Privacy Mask It also has the ability to mask up to 8 areas of the picture where V iewing is not desired.
26 ● Menu Setup ● Lens Setting 1. Press the Function Setup switch. - Main setup menu is displayed on the monitor screen. 1. Preset : INDOOR / OUTDOOR / LOW LIGHT / HALL WA Y / LOBBY / ELEV A T OR. - Used for a quick and easy setup for the installation environment.
27 3. THE Lens mode has sub menu items as listed below . - BRIGHTNESS : Adjusts the video brightness . - FOCUS ADJ : T o adjust the DC lens focus correctly , you must activate the F ocus Settings mode under each lens menu. Activate the F ocus Settings mode , adjust the lens focus , and then deactivate the settings mode .
28 ◆ FUT O GAIN CONTROL) : T he higher the gain level, the brighter the screen - but the higher the noise . * OFF : Deactivates the A GC function. * LOW : Allows automatic gain control from 5.3dB to 32dB . * HIGH : Allows automatic gain control from 5.
29 ※ Select one of the following 5 modes , as appropriate for your purpose . ◆ A TW : Select this when the color temperature is between 1,700˚K and 11,000˚K. ◆ OUTDOOR : Select this when the color temperature is between 1,700˚K and 11,000˚K.
30 ● Backlight Setting Unlik e conventional cameras , the 650Line Intensifier3™ Series are designed to deliver a distinctive subject and background at the same time , even when the subject is backlight, by using the features of the proprietary W -V DSP chip .
31 BLC SETUP HLC SETUP Press Set to Return Press Set to Return LEVEL TOP BOTTOM LEFT RIGHT LEVEL LIMITS MASK COLOR MASK TONE TOP BOTTOM LEFT RIGHT LOW 38 109 54 121 MIDDLE NIGHT ONL Y BLACK 1 5 120 5 .
32 3. Set the SPECO DNR mode to 'ON' and press the Function Setup switch. T hen you can adjust the noise reduction level. ☞ NO TE ■ Y ou cannot set the SPECO DNR to ‘ON’ or ‘OFF’ when the A GC mode of the EXPOSURE menu is ‘OFF’.
33 ◆ A UT O : T he mode is switched to 'Color' in a normal environment, but switches to 'B/W' mode when ambient illumination is low . T o set up the switching time for A UT O mode , press the Function Setup switch. Y ou can turn on or off the burst signal on B/W mode .
34 2. Select a desired mode using the Function Setup switch. SPECIAL IMAGE SETUP 1.IMAGE ADJ 2.MONITOR 3.CAM TITLE 4.SYNC 5.MOTION DET 6.PRIV ACY 7.COMM ADJ 8.LANGUAGE 9.RETURN 1.V -REV 2.H-REV 3.D-ZOOM 4.DIS 5.FONT COLOR 6.SHARPNESS 7.RETURN OFF INT OFF OFF ENGLISH OFF OFF WHITE ON ◆ IMA GE ADJ .
35 ☞ NO TE ■ W hen the V -REV or H-REV mode is enabled, the te xt on the screen does not ip. ■ If you increase the SHARPNESS lev el too high, the pictur e may become distor ted or noise may appear . ☞ NO TE ■ W hen the CAM TITLE menu is ‘OFF’, no title will be displayed on the monitor screen ev en if you enter one.
36 ☞ NO TE ■ W hen using AC po wer a t 60Hz(NTSC), 50Hz(P AL), fr equency , y ou can use the L/L type synchronization. ■ W hen the power is DC 12V , the SYNC menu is xed to the ‘INT’ mode.
37 1) When the SPECIAL menu screen is displayed, press the Function Setup switch so that the arrow indicates 'PRIV ACY'. 2) Set up the mode using the Function Setup switch. - AREA : Y ou can select up to 12 PRIV ACY areas . - MODE : Determines whether to use the area selected in the AREA.
38 ● T rouble Shooting PROBLEM Northing appears on the screen. F Check the power cable, power supply output and video connection between the camera and monitor . F Are the camera lens or the lens glass dirty? Clean the lens / glass with a soft clean cloth.
39.
40 u MEMO.
41 u MEMO.
42 u MEMO.
200 New Highway Amityville, NY 1 1701 631-957-8700 1 800 645 5516 www .specotech.com.
Un punto importante, dopo l’acquisto del dispositivo (o anche prima di acquisto) è quello di leggere il manuale. Dobbiamo farlo per diversi motivi semplici:
Se non hai ancora comprato il Speco Technologies HTINTD8W è un buon momento per familiarizzare con i dati di base del prodotto. Prime consultare le pagine iniziali del manuale d’uso, che si trova al di sopra. Dovresti trovare lì i dati tecnici più importanti del Speco Technologies HTINTD8W - in questo modo è possibile verificare se l’apparecchio soddisfa le tue esigenze. Esplorando le pagine segenti del manuali d’uso Speco Technologies HTINTD8W imparerai tutte le caratteristiche del prodotto e le informazioni sul suo funzionamento. Le informazioni sul Speco Technologies HTINTD8W ti aiuteranno sicuramente a prendere una decisione relativa all’acquisto.
In una situazione in cui hai già il Speco Technologies HTINTD8W, ma non hai ancora letto il manuale d’uso, dovresti farlo per le ragioni sopra descritte. Saprai quindi se hai correttamente usato le funzioni disponibili, e se hai commesso errori che possono ridurre la durata di vita del Speco Technologies HTINTD8W.
Tuttavia, uno dei ruoli più importanti per l’utente svolti dal manuale d’uso è quello di aiutare a risolvere i problemi con il Speco Technologies HTINTD8W. Quasi sempre, ci troverai Troubleshooting, cioè i guasti più frequenti e malfunzionamenti del dispositivo Speco Technologies HTINTD8W insieme con le istruzioni su come risolverli. Anche se non si riesci a risolvere il problema, il manuale d’uso ti mostrerà il percorso di ulteriori procedimenti – il contatto con il centro servizio clienti o il servizio più vicino.
