Manuale d’uso / di manutenzione del prodotto HT7246IHR del fabbricante Speco Technologies
Vai alla pagina of 32
INSTR UCTION MANU AL 650Line Intensier3™ Series Speco T echnologies is constantly de veloping pr oduct impr o vements. W e r eserve the right to modify pr oduct design and specifications without notice and without incurring any obligation.
CA UTION RISK OF ELECTRIC SHOCK DO NOT OPEN CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOC K DO NOT REMOVE COVER(OR BACK). NO USER-SERVICEABLE P ARTS INSIDE. REFER SER VICING TO QUALIFIED SERVICE PERSONNEL. ISO14001 CA UTION RISK OF ELECTRIC SHOCK DO NOT OPEN CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOC K DO NOT REMOVE COVER(OR BACK).
Pr ecautions Do not install the camer a in extr eme temperatur e conditions. Do not touch the fr ont lens of the camer a. Never k eep the camera pointed dir ectly at str ong light. Do not expose the camer a to r adioactivity. Do not install the camer a under unstable lighting conditions.
SPECIFICATIONS 650 Line Intensifier3 (W eatherproof Dome Camera with Chameleon™ Cover) DC Auto Iris V arifocal Lens 2.8-12mm / 9-22mm / 5-50mm MODEL HT7246IHR / HT7247IHR / HT7250IHR 1/3” Sony Super HAD ll CCD NTSC, P AL NTSC=811(H) * 508(V) / P AL=795(H) * 596(V) NTSC=768(H) * 494(V) / P AL=752(H) * 582(V) NTSC=15.
650 Line Intensifier3 (W eatherproof Bullet Camera with mount plate) DC Auto Iris V arifocal Lens 2.8-12mm / 5-50mm / 9-22mm HTINTB8 / HTINTB8W (2.8-12mm) HTINTB9 / HTINTB9W (5-50mm) HTINTB10 / HTINTB.
6 650 Line Intensifier3 (W eatherproof Dome Camera) DC Auto Iris V arifocal Lens 2.8-12mm / 5-50mm / 9-22mm HTINTD8 / HTINTD8W (2.8-12mm) HTINTD9 / HTINTD9W (5-50mm) HTINTD10 / HTINTD10W (9-22mm) ■ .
7 650 Line Intensifier3 (Miniature W eatherproof Dome Camera with Chameleon™ Cover) 3.6mm F ixed Board Lens HT647HRTP (3.6 F ixed Board Lens) ■ SPECIFICATIONS MODEL HT647HR TP 1/3” Sony Super HAD ll CCD NTSC, P AL NTSC=811(H) * 508(V) / P AL=795(H) * 596(V) NTSC=768(H) * 494(V) / P AL=752(H) * 582(V) NTSC=15.
8 650 Line Intensifier3 (Indoor W all & Ceiling Mount Dome Camera) DC Auto Iris V arifocal Lens 2.8-12mm CVC6246IHR / CVC6246IHRW (2.8-12mm) ■ SPECIFICATIONS MODEL CVC6246IHR 1/3” Sony Super HAD ll CCD NTSC, P AL NTSC=811(H) * 508(V) / P AL=795(H) * 596(V) NTSC=768(H) * 494(V) / P AL=752(H) * 582(V) NTSC=15.
9 650 Line Intensifier3 (T raditional Box type Camera) C&CS Mount Lens HTINTT5 (C&CS Mount Lens) ■ SPECIFICATIONS MODEL HTINTT5 1/3” Sony Super HAD ll CCD NTSC, P AL NTSC=811(H) * 508(V) / P AL=795(H) * 596(V) NTSC=768(H) * 494(V) / P AL=752(H) * 582(V) NTSC=15.
10 C AMER A INS T ALL A TION jv uul j{ Gw v~ ly Gj hi sl G XU G~ ol uG |z punG XYG }v s{ zG kj GO G G WWG hP G YU G~ ol uG |z pu nG Y[G }v s{ zG h.
1 Contents ◑ Contents ◑ Safety Instructions ◑ FEA TURES ◑ FEA TURES ◑ Camera Menu Set Up 1. Preset Mode 2. Menu Set Up 3. Lens Setting 4. Exposure Setting 5. White Balance Setting 6. WDR Setting 7. Backlight Setting 8. SPECO DNR Setting 9. Day/Night Setting 10.
2 S af et y Instructions Pr ecautions f or use Please handle this camer a car efully : ◑ This camera should be installed by qualied personnel only ◑ There are no user serviceable parts inside .
3 FE A TURES Now with “PRESE T S” PRESETS (Outdoor , Indoor , Elevator , Lobby , Hallway & Low Light) Used for a quick and easy setup for the installation environment.
4 FE A TURES Motion Detection with Alarm Output Built in motion detector with adjustable areas of coverage will Send a signal to an external alarm device when motion is detected. PRIV A C Y MA SK It also has the ability to mask up to 8 areas of the picture where V iewing is not desired.
5 ● Menu S etup ● Lens S etting 1. Pr ess the F unction Setup switch. - Main setup menu is displayed on the monitor scr een. 1. Pr eset : INDOOR / OUTDOOR / L OW LIGHT / HALL W A Y / L OBB Y / ELE V A T OR. - Used f or a quick and easy setup f or the installation envir onment.
6 3. THE Lens mode has sub menu items as listed below. - BRIGHTNESS : A djusts the video brightness. - F OCUS ADJ : T o adjust the DC lens f ocus corr ectly, you must activate the F ocus S ettings mode under each lens menu. A ctivate the F ocus S ettings mode, adjust the lens f ocus, and then deactivate the settings mode.
7 ◆ A GC(A UT O GAIN CONTROL) : The higher the gain le v el, the brighter the scr een - but the higher the noise. * OFF : Deactivates the A GC function. * L OW : Allows automatic gain contr ol fr om 5.3dB to 32dB. * HIGH : Allows automatic gain contr ol fr om 5.
8 ※ Select one of the f ollowing 5 modes, as appr opriate f or your purpose. ◆ A T W : Select this when the color temperatur e is between 1,700˚K and 11,000˚K. ◆ OUTDOOR : Select this when the color temperatur e is between 1,700˚K and 11,000˚K.
9 ● Backlight S etting Unlik e conv entional camer as, the 650Line Intensifier3™ Series ar e designed to deliv er a distinctiv e subject and back gr ound at the same time, e ven when the subject is backlight, by using the f eatur es of the pr oprietar y W-V DSP chip.
10 BLC SETUP HLC SETUP Press Set to Return Press Set to Return LEVEL TOP BOTTOM LEFT RIGHT LEVEL LIMITS MASK COLOR MASK TONE TOP BOTTOM LEFT RIGHT LOW 38 109 54 121 MIDDLE NIGHT ONL Y BLACK 1 5 120 5 .
11 3. Set the SPECO DNR mode to 'ON' and pr ess the F unction Setup switch. Then you can adjust the noise r eduction le v el. ☞ NO TE ■ Y ou cannot set the SPECO DNR to ‘ON’ or ‘OFF’ when the A GC mode of the EXPOSURE menu is ‘OFF’.
12 ◆ A UT O : The mode is switched to 'Color' in a normal environment, but switches to 'B/W' mode when ambient illumination is low. T o set up the switching time f or A UT O mode, pr ess the F unction Setup switch. Y ou can turn on or off the burst signal on B/W mode.
13 2. Select a desired mode using the F unction S etup switch. SPECIAL IMAGE SETUP 1.IMAGE ADJ 2.MONITOR 3.CAM TITLE 4.SYNC 5.MOTION DET 6.PRIV ACY 7.COMM ADJ 8.LANGUAGE 9.RETURN 1.V -REV 2.H-REV 3.D-ZOOM 4.DIS 5.FONT COLOR 6.SHARPNESS 7.RETURN OFF INT OFF OFF ENGLISH OFF OFF WHITE ON ◆ IMA GE ADJ.
14 ☞ NO TE ■ W hen the V -REV or H-REV mode is enabled, the te xt on the screen does not ip. ■ If you increase the SHARPNESS lev el too high, the picture may become distor ted or noise may appear . ☞ NO TE ■ W hen the CAM TITLE menu is ‘OFF’, no title will be displayed on the monitor screen ev en if you enter one.
15 ☞ NO TE ■ W hen using AC po wer a t 60Hz(NTSC), 50Hz(P AL), fr equency , you can use the L/L type synchronization. ■ W hen the power is DC 12V , the SYNC menu is xed to the ‘INT’ mode.
16 1) When the SPECIAL menu scr een is displayed, pr ess the F unction Setup switch so that the arrow indicates 'PRIV A C Y'. 2) Set up the mode using the Function Setup switch. - ARE A : Y ou can select up to 12 PRIV A C Y ar eas. - MODE : Determines whether to use the ar ea selected in the AREA.
17 ● T r ouble Shooting PR OBLEM Northing appears on the screen. ☞ Check the power cable, power supply output and video connection between the camera and monitor . ☞ Are the camera lens or the lens glass dirty? Clean the lens / glass with a soft clean cloth.
18 POLICY, TERMS AND CONDITIONS OF SALE This statement of policy is in lieu of any other policy, expressed or implied, and no representative or person is authorized to assume for us any other liability or policy without our written consent. We cannot be held responsible for typographical errors.
19 ▶ MEMO.
20 ▶ MEMO.
21 ▶ MEMO.
200 New Highway Amityville, NY 1 1701 631-957-8700 1 800 645 5516 www .specotech.com.
Un punto importante, dopo l’acquisto del dispositivo (o anche prima di acquisto) è quello di leggere il manuale. Dobbiamo farlo per diversi motivi semplici:
Se non hai ancora comprato il Speco Technologies HT7246IHR è un buon momento per familiarizzare con i dati di base del prodotto. Prime consultare le pagine iniziali del manuale d’uso, che si trova al di sopra. Dovresti trovare lì i dati tecnici più importanti del Speco Technologies HT7246IHR - in questo modo è possibile verificare se l’apparecchio soddisfa le tue esigenze. Esplorando le pagine segenti del manuali d’uso Speco Technologies HT7246IHR imparerai tutte le caratteristiche del prodotto e le informazioni sul suo funzionamento. Le informazioni sul Speco Technologies HT7246IHR ti aiuteranno sicuramente a prendere una decisione relativa all’acquisto.
In una situazione in cui hai già il Speco Technologies HT7246IHR, ma non hai ancora letto il manuale d’uso, dovresti farlo per le ragioni sopra descritte. Saprai quindi se hai correttamente usato le funzioni disponibili, e se hai commesso errori che possono ridurre la durata di vita del Speco Technologies HT7246IHR.
Tuttavia, uno dei ruoli più importanti per l’utente svolti dal manuale d’uso è quello di aiutare a risolvere i problemi con il Speco Technologies HT7246IHR. Quasi sempre, ci troverai Troubleshooting, cioè i guasti più frequenti e malfunzionamenti del dispositivo Speco Technologies HT7246IHR insieme con le istruzioni su come risolverli. Anche se non si riesci a risolvere il problema, il manuale d’uso ti mostrerà il percorso di ulteriori procedimenti – il contatto con il centro servizio clienti o il servizio più vicino.
