Manuale d’uso / di manutenzione del prodotto G5450 Series del fabbricante Acer
Vai alla pagina of 150
Acer Altos G5450 Series User’ s Guide.
Changes may be made peri odically to the infor mation in this publication without obligation to notify any person o f such revision or changes. Such changes wi ll be inco rporated in new editions of this ma nual or supplementary docum ents and publications.
iii Notices FCC declaration of conformity This device complies with Part 15 of the FC C Rules. Operation is subject to the following two conditions: (1) this d evice may not cause harmful interference, and (2) this device must accept any interference received, inclu ding interference that may cause undesired ope ration.
iv Notice: Periph eral devices Only peripherals (input/output devices, terminals, printers, etc.) certified to comply with the Class A limits may be attached to this equipm ent. Operation with noncertified peripherals is likely to result in interference to radio and TV reception.
v ADV ARSEL : LASERSTRÅLING VEDÅBNING SE IKKE IN D I STRÅLEN. VA R O : LAV A TT AESSA OLET AL TTINA LASER SÅTEIL YLLE. V ARNING: LASERSTRÅLNING NÅR DENNA D EL ÅR ÖPPNAD ÅLÅ TUIJOT A SÅTEESEENSTIRRA EJ IN I STRÅLEN. V ARNING: LASERSTRÅLNING NAR DENNA D EL ÅR ÖPPNADSTIRRA E J IN I STRÅLEN.
vi CE Declaration of conformity We, Acer Computer (Shanghai) Limited 3F , No. 168 Xizang Medium Road, Huangpu D istrict, Shanghai, China Contact Person: Mr .
vii Declaration of confor mity for EU countries Hereby , Acer , declares that this PC series is in compliance with the essential requirements and other relevant provisions of D irective 1999/5/EC.
viii Information for your safety and comfort Safety instructions Read these instructions carefully . Keep this document for future reference. Follow all warnings and instructio ns marked on the product. T urning the product of f before cleaning Unplug this product from the wall ou tlet before cleaning.
ix • Slots and openings are provided fo r ventilation to ensure reliable operation of the produc t and to protec t it from over heating. These openings must not be blocked or covered. The openings should never be blocked by placing th e product on a bed , sofa, rug or other similar su rface.
x W a rning! The grounding pin is a safety feature. Using a power outlet that is not properly grounded may re sult in electric shock and/or injury . Note: The ground ing pin also provid es good protection from unexpected noise prod uced by other nearb y electrical devices th at may interfere with the performance of this produ ct.
xi • the produc t exhibits a distin ct change in performance, indicating a ne ed for service • the product does not operate normally after follo wing the operating instructions Note: Adjust only t.
xii T ips and information for comfortable use Computer users may complain of eyestrain and headaches after prolonged use. Users are also at risk of physical injury after long hours of working in front o f a computer .
xiii T aking care of your vision Long viewing hours, wea ring incorrect glasses or contact lenses, gla re, excessive room lighting, poorly focused screens, very small typefaces and low-contrast displays could stress your eyes. The follo wing items provide suggestions on how to reduce eyestrain.
xiv Developing good work habits Develop the following work habits to make you r computer use more relaxin g and productive: • T ake short breaks regularly and often. • Perform some stretching exercises. • Breathe fresh air as often as possible. • Exercise regularly and maintain a healthy b ody .
Contents 1 System tour 1 System spe cification s 3 Performance 3 Mechanical 6 Environmental 6 Hardware op tions 7 External and internal structure 8 Front bezel 8 Front panel 9 Rear panel 11 Internal c.
xvi Removing a HDD cage 42 Installing an additional hard drive 43 Configurin g a 5-25 inch stora ge device 46 Upgrading the processor 48 Upgradin g the s ystem me mory 52 DIMM population g uidelines 5.
xvii Initial system startup problems 98 Initial troubleshooting c hecklist 99 Hardware diagnostic test ing 100 Checking the boot-up status 100 Verifying the conditio n of the storage devices 101 Confi.
xviii.
1 System tour.
The Acer Altos G5450 serv er is a fully modular dual-processor system f eaturing the latest in computing technology . It hosts a range of powerful and flexible f eatures designed to meet the needs of various network environments. From simple networking functions to computing intensive applications, the Altos G5450 delivers.
3 System specifications This sectio n lists down the impressive computing features of the Altos G 5450 syst em. Performance Processor • T wo socket F (1207-pin) AMD pr ocessor sockets su pporting Du.
1 System tour 4 PCI interface • Five PCI bu s slots • T wo PCI Express x16 bus slot s with, one x16 throughput and one x8 throughput • One PCI Express x8 bus slot with x4 throughput • T wo 32-.
5 I/O ports Power supply and system fan • 610-watts power supply with hot-swap redundant option • System fa n with r edundant or hot-swap re dundant option Hardware monitoring and serv er manage m.
1 System tour 6 Mechanical •C h a s s i s • T ool-less chassis design for eas y hardware access and configuration • T ower and rack-mount (5U, tray-less) setup options •D i m e n s i o n s – Height: 445 mm (17.5 in) – Depth: 212 mm (8.3 in) – Width: 550 mm (21.
7 Har dware options Note: T o purchase the any of the following hardware options, contact your local Acer representative. • Media storage • LSI SAS controller board su pports: – SAS and SA T A2 .
1 System tour 8 Exter nal and inter nal structure Front bezel No. Component 1 Side panel release button 2 Security keylock This lock secures the bezel door to protect the server unit from unauthorized access. 3 LED indicator panel For more information on the LED i ndicators description, go to page 20.
9 Front panel No. Icon Component Description 1 DVD-ROM drive Eject button Press this button to open the DVD drive tray . 2 DVD-ROM drive activity indicator When the LED indicator is lit, there is an ongoi ng DVD drive activity .
1 System tour 10 8 Status/fault indicator Indicat es the status of the system operations (green/amber). 9 LAN port 1/2 status indicators Indicate the system network connection status. 10 Hot-plug HDD activity indicator Indicates the status of a hot-plug HDD installed in the system (green /amber).
11 Rear panel No. Icon Component Description 1 Power supply module release latch Push down the latch to disengage the module from the chassis. 2 Power supply module cord socket Connect the system power cord here. 3 Main power supply module Provides the system’ s main power supply .
1 System tour 12 8 USB 2.0 ports Connects to USB devices. 9 Gigabit LAN ports 1/2 Connects to an Internet or intranet network. 10 Unit identi ficati on (UID) switch/ indicator Press to mark a particular server unit within a server gr oup (when rack-mounted) for purpose of identification during servicing or maintenance procedures.
13 Internal components No. Component 1 Redundant power supply modu le bay 2 Heat sink fan (HSF) assemblies 3 Release sliders for the 5.25-inch devices 4 Release sliders for the HDD cages 5 Mainboard 6 PCI slot lock levers 7 System fan Users have the option to purchase a redundant system fan unit or hot-swap redundant system fan unit.
1 System tour 14 System boar ds Mainboard.
15 No. Code Description 1 KB_MS1 TOP: PS/2 Mouse Port Bottom: PS/2 Keyboard Port 2 COMA1 Serial Port 3 VGA1 Monitor Port 4 R_USB1 USB2.0 Port 5 GLAN1 Gigabit LAN port1 6 GLAN2 Gigabit LAN port2 7 SW1 .
1 System tour 16 21 IDE1 IDE Cable connector 22 SA T A 1-6 SA T A Data cable connector 23 F_USB1 Front USB cable con nector 24 F_USB2 Internal USB cable connector 25 U24 NVIDIA nForce Professional 360.
17 B ackplane board The backplane board attached to re ar of the hot-plug HDD cage is what differentiate it from th e easy-swap HDD cage model. 43 BP1 I 2 C connector for SAS Backplane No.
1 System tour 18 BMC module The optional BMC module is the me eting point between the server hardware and the system manageme nt software. In conjunction with the mainboard hardware monitor , it allows system administrators to manage the system remo tely over a netw ork.
19 ARMC/3 module The optional AR MC/3 module expands the server’ s rem ote management function through its own dedic ated NIC port. Sys tem administrators can now have full remote access to the server rega rdless of its condition.
1 System tour 20 System LED indicators This section discusses the different LED indicators located on the: • Front pane l • Hot-plug HDD carrier • LAN port • Power supply mo dule Knowing what each LED indicato r signifies can aid in problem diagnosis and tro ubleshoo ting.
21 Hot-plug HDD LED indicator A drive activity LED indicator is m ounted on the hot-plu g HDD carrier . The table below lists the possible drive states.
1 System tour 22 Power supply module LED indicators Indicator Col or Status Description Status (top) Green On Output requirements are met. Off AC power is disconnected from the module.
2 System setup.
This chapter gives you instructions on how to prepare the system for ope ration. Procedures for connecting peripherals are also explained..
25 Setting up the system Pre-installation r equirements Selecting a site Before unpacking and installing the sy stem, selec t a suitabl e site for the system for maximum efficiency .
2 System setup 26 Connecting peripherals The color-coded I/O po rt panel on the system rear accepts a variety of compatible peripherals. Refer to the figure below for specific connection in structions for each port. Note: Consult the operating system manual for information on how to configure the network setup.
27 T ur ning on the system After making sure that you have pr operly set up the system, applied power , and connec ted all the necessary per ipherals, yo u can now power on the system. Follow the proced ure below . 1 Open the bezel door . 2 Press the po we r button.
2 System setup 28 Note: If the system does not turn on or boot after pressing the power button, go to the next sect ion for the possible causes of the boot failure. Aside from the POST messages, you ca n determine if the system is in good condit ion by checking if the following occurred.
29 Configuring the system OS The Altos G5450 comes with Acer EasyBUILD that allows users to conveniently install the preferred operating system. T o start using EasyBUILD, follow the steps below . 1 Locate the EasyBUILD DVD includ ed in the system packa ge.
2 System setup 30 Rack mount configuration The Altos G5450 server is a dual-platform system that can be se t up in both tower and rack-mount config urations.
31 T ur ning of f the system There are two ways to turn off the server—via software or via hardware. The software procedure be low applies to a system running on a Windows OS. For other OS sh utdown procedures, refer to the related user documentation.
2 System setup 32.
3 System upgrade.
This chapter discusses the precautionary measures and installa tion procedures you need to know when upgr ading the system..
35 Installation pr ecautions Before you in stall any se rver compon ent, it is recommended that you read the following sections first. These sections contain impor tant ESD precautions along with pre-installation an d post-installation procedure s.
3 System upgr ade 36 Pre-installation instructions Perform the steps below before you open the server or before your remove o r replac e any component. W arning! Failure to properly turn off the server before you start perform any hardware configuration may cause serious damage and bodily harm.
37 Opening the server Caution: Before you procee d, make sure that you have turned off the system and all peripherals connected to it. Read the “Pre-installation instructions” section on page 36. Y ou need to open the server before you can install up grade components.
3 System upgr ade 38 Removing the fr ont bezel 1 Remove the side panel. Refer to the previous se ction for instructions. 2 Remove the front bezel. (1) Re lease the bezel door retent io n tabs from t he chassis interior . (2) Pull the bezel away from the chassis.
39 Configuring the har d drive The two HDD cage bays of the Altos G5450 accommodates both hot-plug and easy-swap HDD cage models. The main difference between these two cage mo dels is the presence of a backplane board on the rear side of th e hot-plug HDD cage.
3 System upgr ade 40 3 Install the HDD cage. (1) S lide the cage into the lowe r bay with the HDD carr iers facing front. The cage locked to the cha ssis with an audible click. If you have installed a hot-pl ug HDD cage, proceed to next step for related drive c able connecti ons.
41 (3) Connect the other end of the SAS/SA T A2 cable to the SAS connector of the add-on SAS contro ller board. 4 Remove the HDD cage bay plasti c cover from the front bezel. (1) Use a flat-blade s crewdriver to disengage the tabs on the top edge of the cover f rom its bezel slots.
3 System upgr ade 42 Removing a HDD cage 1 Perform the pre-installation in structions descri bed on page 35. 2 Prepare the HDD cage for removal. • For a hot-plug HDD cage, disc on nect the data and power cables from the backplane board, the n remove all HDDs from the cage.
43 Installing an additional har d drive The Altos G5450 HDD cage models supports both SA T A2 and SAS hard drives in different capacities. Note: If you intend to install a SAS hard drive model, you first need to install the add-on SAS controller card optio n.
3 System upgr ade 44 4 Align the new hard disk with the HDD carrier , then secure it with the four screws you removed in step 3-1. 5 Install the new hard drive into the cage.
45 T o install an easy-swap ha rd drive: 1 Remove the side panel from the chassis. Go to page 37 fo r instructions. 2 Observe steps 2 through 5 of the previous sec tion. 3 Connect the easy-swap HDD cables. (1) Connect the power connectors of the SAS/SA T A2 cable to the power supply module HDD power cables.
3 System upgr ade 46 Configuring a 5-25 inch storage device The three 5.25-inch device bays supp ort a variety of storage devices for additional storage c apaci ty and scalability . Go to page 4 for a list of supported st orage devices . The system ships with a DVD-ROM drive installed on the topmost device bay .
47 Keep this cover for future reinstallation. 6 Install the new 5.25-inch storage device. The instructions given below apply to a regular 5.25-inch storage device. If you intend to replace or install a floppy drive, refer to the documentation that came with the new drive for instructions on how to set up the FDD conversion kit.
3 System upgr ade 48 Upgrading the pr ocessor This section explains the procedures for removing and installing the processor and he at sink fan (HSF) assembly . Processor configuration guidelines The mainboard has two Socket F (120 7-pin) processor sockets supporting Dual-Core o r Quad-Core AMD Opteron™ processors.
49 3 Remove the HSF assembly . Important: Before removing a C PU from the mainboard, make sure to create a backup file of all important data. (1) Obser ve the ESD precautions and pre-installati on instructions described on page 35. W a rning! The heat sink becomes very hot wh en the system is on.
3 System upgr ade 50 (3) Gra sp the processor by its edge s and lift it ou t of its socke t. (4) Store the old processor inside an anti-static bag. (5) Remove the new proc essor from its pr otective pack aging. 5 Install the new processor . (1) Hold the processor by its edges, then insert it in the socket.
51 7 Reinstall the HSF assembly . (1) Apply ther mal grease. Apply approximately 0.1ml of the thermal grease compound to the top of the CPU. (2) Inst all the HSF assembly (1) Move the handle of the retaining clip slight ly in a direction away from the heat sink.
3 System upgr ade 52 Upgrading the system memory This section includes instructions for removing and installing a DIMM (dual in-line memory module). Altos G5450 has sixteen DIMM slots. Each CPU controls e ight DIMM slots. The DIMM slots support dual channel DDR2 -6 67 registered ECC memory modules.
53 DIMM population guidelines Important: For the system to function, DIMM modules must be installed or removed in match ed pai rs, following the slot sequence listed below . DIMM modules of the same type, size and manufacturer must be installed in the same colored DIMM slots.
3 System upgr ade 54 The table below lists the supported memory installation based on the processor conf iguration : Single processor config uration * support depends on 4 GB DIMM available CPU 1 (Sin.
55 Dual-processor s configurati on * support depends on 4 GB DIMM available CPU 1 / CPU 2 (Dual Pr ocessors Installed) To t a l Capacity DIMM B1/A1 DIMM C1/D1 DIMM B2/A2 DIMM C2/D2 DIMM B3/A3 DIMM C3/.
3 System upgr ade 56 Removing a DIMM Before you can in stall a new pair DI MMs in the sockets, remove first any previously installed DI MM from that sockets. Important: Before removing DIMMs from the mainboard, make sure to create a backup file of all important data.
57 Installing a DIMM W a rning! DIMM of the same type, size and manufacturer must be installed into the same colored DIMM slots. 1 Observe the E SD precautions an d pre-installation instructions described on page 35. 2 Locate the DIMM slo ts on the mainboard.
3 System upgr ade 58 Installing an expansion car d This section explains h ow to install an expan sion card. I/O interface Altos G5450 has five PCI bus slots: • PCI1--32bit/ 33MHz PCI sl ot • PCI2.
59 Caution: Do not discard the slot cover . If the e xpansion card is removed in the future, the slot cover must be reinstalled to maintain proper system cooling. Remove the expansio n card from its pr otective pack aging, handling it by t he edges. (3) Inse rt the card into the selected slot.
3 System upgr ade 60 Installing the BMC module The optional BM C module all ows sy stem adminis trators to manage the Altos G 5450 sy stem remo tely over a netw ork. T o install the BMC module: 1 Perform the pre-installation in structions descri bed on page 35.
61 Installing the ARMC/3 module Remote system ma nagement jus t got easier with the new ARMC/3 module. The module provides hi gh performance KVM (keyb oard- video-mouse) redirection and featur es a dedicated NIC port for faster network access .
3 System upgr ade 62 2 Locate the SODIMM1 slot on the BMC module boar d. If necessa ry , remove any boards or cables that prevent access to it. 3 If necessary , open the ho lding clips of the SODIMM1 sl ot. 4 Remove the AR MC/3 module from its protective packaging, handling it by t he edges.
63 (2) Pull out the slot cover and store it for reassembly later . Caution: Do not discard the slot cover . If the expansion card is removed in the future, the slot cover must be reinstalled to maintain proper system cooling. (3) Inse rt the dedicated NIC port card into the selected slot.
3 System upgr ade 64 (5) Connect the card’ s LAN cable to the LAN1 connector of the ARMC/3 module. 7 Observe the post-installat ion inst ructions described on pag e 36.
65 Installing a r edundant power supply module The Altos G5450 supports two 610 -watts hot-swap power supply modules. The system ships out with only one power supply module installed. Y ou have the option to instal l a second module to provi de the system with a re dundant powe r source.
3 System upgr ade 66 T o install a hot-swap power supply m odule: 1 Detach the c over from the chas sis. Keep the cover for future reassembly . 2 Slide the module into the empty bay unti l you feel resistan ce, and it locks into place.
4 System BIOS.
4 System BIOS 68.
This chapter gives information about the system BIOS and discus ses how to configure the system by changing th e settings of the BIOS parameters..
4 System BIOS 70 BIOS overview BIOS setup is a hardware configurat ion program built into the system's Basic Input/Outp ut System (BIOS). Since most systems are already properly co nfigured a nd optimized, there is no n eed to run this utility . Y ou will need to run thi s utility under the foll owing conditions.
71 Entering BIOS setup 1 T urn on the server a nd the monitor . If the server is already turned on, close all open applications, then restar t the serv er . 2 During PO ST , pre ss F2 . If you fail to press F2 before POST is completed, yo u will need to restar t the serv er .
4 System BIOS 72 BIOS setup navigation keys Use the following keys to move around the Setup uti lity . • Left and Right arrow keys – Mo ve between selections on the menu bar . • Up and Down arrow keys – Move the cursor to the field you want. • PgUp and PgDn keys – Move the cursor to the previous and next page of a multip le page menu.
73 Main menu Parameter Description System T ime Set the system time following the hour -minute-second format. System Date Set the date following the month-day-year format.
4 System BIOS 74 Advanced menu The Advanced menu display subm enu options for configuri ng the function of vari ous hardware compone nts. Select a submenu item, then press Enter to access the related submenu screen.
75 CPU Speed The processor speed is the speed at which a microprocessor executes inst ructions. Clock speeds are expressed in megahertz (MHz), with 1 MHz being equal to 1 million cycles per second. The faster the cloc k, the more instructions the CPU c an execute per second.
4 System BIOS 76 Memory Configuration Parameter Description Option Extended Memory T otal size of extended me mory detected during POST DIMM Group #1 - 16 Status The size of memory installed on each o f the memory slots. Unlock Disabled Banks Press Enter key to configure.
77 Advanced Chipset Contr ol Parameter Description Option Wake on Keyboard/ Mouse Select whether to enable the Wake on Keyboard/Mouse function. Enabled Disabled Wake On Ring Select whether to wake up the system when an incoming call is detected on the modem.
4 System BIOS 78 PCI Configuration Parameter Description Option PCI Slot 1 - 5 Option ROM When enabled, this setting will initialize the device expansion ROM for the related PCI slot. Enabled Disabled LAN 1/2 Option ROM Scan Select whether to enable the selected onboard LAN device.
79 I/O Device Configuration Parameter Description Option Serial Port A/B When enabled, it allows you to configure the serial port settings. When set to Auto , it allows the server’ s BIOS or OS to select a configuration. When set to Disabled , it displays no configuration for the serial port.
4 System BIOS 80 IDE Configuration The IDE Configuration submenu lets you def ine the parameter settings related to the system hard drive(s). SA T A0 Controllor Select whether to enable support for SA T A devices. Enabled Disabled SA T A1 Controllor Select whether to enable support for SA T A devices.
81 I/O Channel 0/Secondary Master/Slave Parameter Description Option T ype Selects th e drive type. Auto None CD-ROM A T API Remova ble IDE Removable User T otal Sectors T otal number of sectors available in the selected hard drive. Maximum Capacity Maximum capacity of the selected hard drive.
4 System BIOS 82 Floppy Configuration The Floppy Configurati on submenu displays the type of floppy disk drive installe d in the server . T ransfer Mode Select a transfer mode to enhance ha rd disk performance. Fast PIO 4 Standard Fast PIO 1 Fast PIO 2 Fast PIO 3 FPIO 3/DMA 1 FPIO 4/DMA 2 Ultra DMA Mode Selects DMA (Direct Memory Access) mode.
83 Boot Configuration Parameter Description Option Boot-time Diagnostic Screen Choose whet her to display th e boot-time diagnostic screen during POST .
4 System BIOS 84 DMI Event Logging After Power Failure Defines the power state to resume to after a system shutdown that is due to an interruption in AC power . When set to Last State , the system will return to the active power state prior to shutdown.
85 View DMI Event Log Press Enter to view the DMI (Desktop Management Interface) event log. T o return to the DMI Event Logging submenu, click Continue in the Event Log window . Event Logging Select whether to allow logging of all DMI events. Enabled Disabled ECC Event Logging Select whether to allow logging of ECC events.
4 System BIOS 86 Security menu The Security menu allows you to safeguard and protect the s ystem from unauthorized use by se tting up access passwords. There are three types of passwords that you can set: • Supervisor password Entering this password will allow the user to access and change all settings i n the Se tup Utility .
87 Setting a system passwor d 1 Use the up/down keys to select a pass word parameter (Set Supervisor Password or Set User Password), then press Enter . A password box will a ppear . 2 T ype a password then pre ss Enter . The password may consis t of up to six alphanum eric charact ers (A-Z, a-z, 0-9).
4 System BIOS 88 Changing a system passwor d 1 Use the up/down keys to select a pass word parameter (Set Supervisor Password or Set User Password), then press Enter . 2 T ype the original pa ssword then press Enter . 3 T ype a new passwo rd then p ress Enter .
89 Server menu Parameter Des cription System Management Displays basic system ID information, as well as BIOS and BMC firmware versions. Press Enter to access the related submenu. Console Redirection Displays consol e redirection-related settings. Press Enter to access the related submenu.
4 System BIOS 90 System Management The System Management submenu is a simple display page for ba sic system ID information, as well as BIOS and BMC fi rmware versions.
91 Parameter Desc ription Option COM Port Address Select whether to enable console redirection. Console redirection enables users to manage the system from a remote location. Onboard COM A Disabled Onboard CO M B Baud Rate Select the baud rate for console redirection.
4 System BIOS 92 Event Log Configuration Parameter Description Option Clear All Event Logs Press Enter then select whether to clear all entries in the system event log. Log POST Sys. Event Select whether to enable the BIOS event log to be integrated in the system event log.
93 Boot menu The Boot menu allows you to se t the dr ive priority during system boot-up. BIOS setup will display a n error message if t he drive(s) specified is not bootable.
4 System BIOS 94 Exit menu The Exit menu displays the various op tions to quit from the BIOS setup. Highlight any of the ex it options then press Enter . Parameter Description Exit Saving Changes Save changes made and close the BI OS setup. Exit Discarding Changes Discard changes made and clos e the BIOS setup.
5 System tr oubleshooting.
This chapter provides possible sol utions for specific problems. If you cannot correct the problem, contact your local Acer representative or authorized dealer for assistance.
97 Resetting the system Before going th rough in-de pth troub leshooting, att empt first to reset the system using one of the methods below . Perform Purpose T o do this Soft boot reset T o clear the system memory and reload the operating system.
5 System troubleshooting 98 Initial system startup pr oblems Problems that occur at initial syst em startup are usu ally caused by an incorrect installation or configur ation.
99 Initial tr oubleshooting checklist Use the checklist below to eliminate the possible cause for the problem you’re encounterin g. • AC power is available at the wall outlet? • Is the power sup.
5 System troubleshooting 100 Har dware diagnostic testing This sectio n provide s a detail ed ap proach to identifying a hardware problem a nd its ca use. Checking the boot-up status Caution: Before disconnecting any peripheral cables from the server , turn off the system and any peripheral devices.
101 V erifying the condition of the storage devices As POST determines the system configur ation, it tests for the presence of each mass st orage device installe d in the system. As each device is checked, its activity indi cator should turn on gr een briefly .
5 System troubleshooting 102 Specific pr oblems and corrective actions Listed below are specif ic problems that may arise during th e use of your server and their possible solution s. Power indicator does not light. Do the following: • Make sure the power supply mo dule is properly i nstalled.
103 HDD activity indicato r does not light. Do the following: • Make sure the data and power cables are connected correctly . • Check that relevant switches and jumpers on the ha rd drive and on the backplane board (for hot-plugs HDD) are set correctly .
5 System troubleshooting 104 Network connection ind icators do not light. Do the following: • Check the cabling and network eq uipment to make sure that there are in proper condition. • Reinstall the network drivers. • T ry another port or hub on the switch.
105 No characters appear on the dis play monitor . Check the following: • Is the keyboard function ing? T e st it by turning the Num Lock function on and off to check i f the Num Lock indicator lights up.
5 System troubleshooting 106.
Appendix A: Server management tools.
This appendix gives an overview of the diff erent server management tools supported by your server ..
109 Server management overview The server management tools supported by the Alt os G5450 system is listed in the table below . T ool Function Phoenix BIOS Se tup Utility Use this tool to configure the dif ferent hardware components and system functions (memory , processor , and security se ttings).
Appendix A: Server manage ment tools 110 RAID configuration utilities RAID opti on for the Altos G5450 sys tem is pro vided thr ough eith er the onboard SA T A contr oller or throug h a controller board option (LSI SAS controller or LSI MegaRAID SAS RA ID controller).
111 Note: Y ou have to in stall at least one SA T A HDD to the onboard SA T A controller in the system or you cannot see the MediaShield ROM BIOS 6.77 during POS T . Creating a RAID1 V olume 1 After you entering the configuration utility , Use the Up and Down arrow key to change the RAID Mode to Mirroring .
Appendix A: Server manage ment tools 112 Creating and Initialing a RAID V olume 1 Launch th e configura tion menu. 2 Select Configuration Wizard 3 Select Add Configuration (default) and click on Next . 4 Select Custom Configuration (default) and click on Next .
113 Starting LSI MegaRAID SAS R AID Configuration Utility T o start LSI MegaRAID SAS RAID Co nfiguration Utility fo r MegaRAID SAS 8204ELP , press CTRL-M when you see the RAID BIOS du ring POST . After POST finished, the Adapter Se lection page will show on th e screen.
Appendix A: Server manage ment tools 114 Initial RAID V olume 1 Select Initialize from Management menu . All logical drives should be listed under Logical Drives . 2 Press Spacebar to select drives for in itializatio n. The selecte d drive will be shown in yellow .
Appendix B: Rack mount configuration.
This appendix shows you how to set up the Altos G5450 server in a rack mount configuration..
117 Rack installation information The Altos G5450 server system can also be mount ed in a rack-model position. A rack mount kit is ava ilable for customers who want to convert a tower-mounted system to ra ck-model design. T o purchase a rack mount kit, co ntact your local Acer representa tive or order directly from http://www .
Appendix B: Rack mount con figuration 118 • Elevated operating ambient temperature The maximum operating temperature of the system is 35°C (95°F). Careful con sideratio n should b e gi ven to installing the system in an environment compatible wi th the 35°C (95°F) maximum ambien t tempera ture.
119 Screw types The following screws are used in the assembly of the Altos G5450 system and bundled rack-mountable components. Front brackets 2 Attach the mo unting rails to the server . Rear brackets 2 Side handles 2 Attach to the sides of the server .
Appendix B: Rack mount con figuration 120 V ertical mounting hole patter n The four vertical rails of the syst em rack contain mounting holes arranged in a mann er shown in the figure be low . The system occupies 5U in the rack . Count the U positions an d hole numbers from the bottom up.
121 Rack installation pr ocedures Preparing the server for rack installation 1 Remove the foot stands from the server . (1) Lay the server on its side on a flat, stable surface. (2) Use a flat-blade s crewdriver to remove the stoppers secur ing the foot stands to the chassis.
Appendix B: Rack mount con figuration 122 3 Remove the inner rails from the mounting rails . (1) Extend the inner rail fr om th e mounting rail until the rail release latch is exposed. (2) Depres s the release latch (1) and slip the inner rail out (2) .
123 Preparing the rack fo r server installation 1 Install eight distands into the vertical rails of the system rack. 2 Adjust the front bracket to the preferred length. (1) T urn the ca ptive thumbsc rews counterclockwise to loosen them. (2) Slide the front bracket to the preferred length.
Appendix B: Rack mount con figuration 124 3 Install the mounting rails to the system rack. (1) Install the mounting rails to the rack by us ing four M6 x 13 screws for each rail. (2) Extend the middle sliding piec e of each mounting rail forward until you hear an au dible clic k.
125 Installing the server in the system rack W ar ning! T o avoid injury , care should be taken when pressing the inner rail release latches and sliding the component into the rack. It is also recommended that two or more people help in installi ng the server to the rack to minimize the c hances of accide nts.
Appendix B: Rack mount con figuration 126 Installing the cable arm option The cable arm option allo ws you to tie-wrap all cables to and from the system. As you slide th e system in a nd out of the rack, the cable arm collapses and extends, keeping t he cables unta ngled and attac hed to the system.
127 3 Extend the cable arm enough to at tach it to the installed M6 cage nuts, and secure it with two M6 x 18 screws. 4 Arrange the serve r cables. (1) Connect the power , peripheral and networking cabl es into their appropriate ports on the rear panel.
Appendix B: Rack mount con figuration 128.
129 Index Numerics 5.25 inch device bays install 46 location 9 supported devices 4 A Acer EasyBUILD scope 29 using 29 ARMC/3 module board layout 19 install 61 specifications 7 B backplane board board .
130 view 8 front panel 9 H hard drive activity indicator, location 9 activi ty indic ator, statu s 20 BIOS settings 80 install, easy-swap 45 install, hot-plug 43 RAID configuration 110 troublesh ootin.
131 status indicator, location 12 power-on password 86 power-on self-test, see POST 27 processor BIOS information 73 BIOS settings 74 configuration guidelines 48 remove 49 upgrade 48 PS/2 keyboard por.
132 FAQ 102 FDD problem 102 hardware diagnostics 100 HDD problem 103 initial checklist 99 initial startup problems 98 memory problem 103 network problems 104 power indicator problem 102 software prog .
Un punto importante, dopo l’acquisto del dispositivo (o anche prima di acquisto) è quello di leggere il manuale. Dobbiamo farlo per diversi motivi semplici:
Se non hai ancora comprato il Acer G5450 Series è un buon momento per familiarizzare con i dati di base del prodotto. Prime consultare le pagine iniziali del manuale d’uso, che si trova al di sopra. Dovresti trovare lì i dati tecnici più importanti del Acer G5450 Series - in questo modo è possibile verificare se l’apparecchio soddisfa le tue esigenze. Esplorando le pagine segenti del manuali d’uso Acer G5450 Series imparerai tutte le caratteristiche del prodotto e le informazioni sul suo funzionamento. Le informazioni sul Acer G5450 Series ti aiuteranno sicuramente a prendere una decisione relativa all’acquisto.
In una situazione in cui hai già il Acer G5450 Series, ma non hai ancora letto il manuale d’uso, dovresti farlo per le ragioni sopra descritte. Saprai quindi se hai correttamente usato le funzioni disponibili, e se hai commesso errori che possono ridurre la durata di vita del Acer G5450 Series.
Tuttavia, uno dei ruoli più importanti per l’utente svolti dal manuale d’uso è quello di aiutare a risolvere i problemi con il Acer G5450 Series. Quasi sempre, ci troverai Troubleshooting, cioè i guasti più frequenti e malfunzionamenti del dispositivo Acer G5450 Series insieme con le istruzioni su come risolverli. Anche se non si riesci a risolvere il problema, il manuale d’uso ti mostrerà il percorso di ulteriori procedimenti – il contatto con il centro servizio clienti o il servizio più vicino.