Manuale d’uso / di manutenzione del prodotto VGNA200 del fabbricante Sony
Vai alla pagina of 316
Welcome Congratulations on your purchase of this Sony VAIO ® computer, and welcome to the online VAIO ® Computer User Guide. This user guide provides detailed information on all aspects of using your new VAIO computer, from keyboard functions to preinstalled software programs.
Ergonomics and Caring for Your Computer This section provides information on how to safely use your Sony computer. Page 2.
Applying Ergonomics Your computer is a portable device and can be used in a variety of environments. Whenever possible, you should apply the following ergonomic considerations: Position of your computer — Place the computer directly in front of you as you work.
Storing Your Computer Do not use or store your computer in a location subject to: Heat sources, such as radiators or air ducts Direct sunlight Excessive dust Moisture or rain M.
Using Cables and Connections Use only specified peripheral equipment and interface cables. Do not use cut or damaged connection cables. If the telephone company makes a service call to your home or office and determines that your computer is responsible for a problem, the telephone company may bill you for the service call.
Cleaning and Maintaining Your Computer Clean the computer with a soft, dry cloth or a soft cloth lightly moistened with a mild detergent solution. Do not use any type of abrasive pad, scouring powder, or solvent such as alcohol or benzine, as these may damage the finish of your computer.
Handling the LCD Screen Direct sunlight can damage the LCD. Be careful when using the computer near a window. Do not scratch the LCD or exert pressure on it. This can cause a malfunction. Using the computer in low temperature conditions may produce a residual image on the screen.
Locating Controls and Ports Congratulations on your purchase of the Sony ® VAIO ® computer. Sony has combined leading-edge technology in audio, video, computing, and communications to provide state-of-the-art personal computing.
Front 1 Speakers 5 Brightness sensor 2 Num lock indicator 1 6 Power button 3 Caps lock indicator 2 7 Left and right buttons 4 Scroll lock indicator 3 1 I ndic ator appears on the top or right c orner of the keyboard depending on the model that you purc has ed.
3 Network (Ethernet) port 6 Air vent 1 Supports high-/full-/low- s peeds . Only connect 10BASE-T, 100BASE-TX, 1000BASE-TX (available on selected models only) cables to the Network (Ethernet) port. Do not connect any other type of network cable or any telephone line to this port.
1 Drive eject button 4 Manual eject hole 2 Optical drive 5 Modem jack 3 Drive eject button You can use either drive eject button to eject the optical drive tray. The drive eject button located next to the optical drive functions only with Microsoft ® Windows ® operating system.
See "Connecting a Wireless Mouse" in the Mice and Keyboards chapter of your on-screen VAIO ® Computer User Guide for more information about using the wireless optical mouse. The printer port on this port replicator is intended for printer connections only.
1 Composite Audio In jacks 8 Composite Audio Out jacks 2 Air vent 9 Composite Video Out jack 3 USB 2.0 ports 1 10 S Video Out port 4 Monitor (VGA) port 11 Printer port 5 DVI-D port 12 USB 2.
About the Indicator Lights Indicator Function Power Turns on when the power to the computer is on, blinks in Standby mode, and turns off when the computer is in Hibernate mode or off. Battery Turns on when the computer is using battery power, blinks when the battery is running out of power, double-blinks when the battery is charging.
Using Special Buttons Your VAIO ® computer is equipped with a variety of audio- and video-oriented function buttons: Volume, Brightness, and Magnify screen.
About the special buttons The following information shows where the special buttons are located, and briefly describes their functionality. Special Buttons Number Type of Button 1 Mute. The Mute button enables and disables the audio output when using headphones or the internal speakers.
Using the S1 button As a shortcut, you can assign a pre-programmable S1 button to enter a power saving mode, switch between displays, or launch an application. To assign a function to a programmable button 1. Click Start , and point to All Programs and then Sony Notebook Setup .
Additional information about adjusting the brightness of the LCD screen Your computer comes with a brightness sensor that automatically increases and decreases the LCD screen's brightness level depending on the amount of external light. The automatic sensor is engaged the first time you turn on your computer.
Mice and Keyboards Using the Keyboard Although your computer's keyboard is very similar to a typewriter's keyboard, you can use the additional keys on the computer's keyboard to perform specific computer-related tasks.
Mice and Keyboards Using the Keyboard Although your computer's keyboard is very similar to a typewriter's keyboard, you can use the additional keys on the computer's keyboard to perform specific computer-related tasks.
Keyboard descriptions Key Description The numeric keypad contains the keys found on a typical calculator. Use the numeric keypad to type numbers or perform mathematical calculations, such as addition and subtraction. Numbers appear on the front beveled edge of the numeric keys.
Windows key combinations Key combination Function +F1 Displays the VAIO Help and Support Center window. +Tab Switches the selected button on the taskbar. +D Displays the desktop. +E Displays the My Computer window. +F Displays the Search Results window, where you can find a file or folder.
Fn key combinations Key combination Function Fn+F5 Decreases the LCD screen brightness. Fn+F6 Increases the LCD screen brightness. Fn+F7 Toggles the display between the computer screen (LCD), a connected external display, and both the LCD and an external display.
Connecting a Mouse or Keyboard Your computer is compatible with many popular mice and keyboards. To function properly, the device you connect must be compatible with the Microsoft ® Windows ® operating system installed on your computer.
Connecting a mouse or keyboard If you connect the mouse or keyboard when the computer is on, you may need to restart the computer for it to recognize the device. To connect a USB mouse or keyboard to your computer 1. Plug the USB cable into the USB port .
Disconnecting a mouse or keyboard You can disconnect a USB mouse or keyboard when the computer is on or off. However, disconnecting the mouse or keyboard when the computer is in a power saving mode (Standby or Hibernate) may cause the computer to malfunction.
Connecting a Wireless Mouse A wireless mouse is optional with your VAIO ® computer. The following section explains the parts of the wireless mouse and how it works. Wireless m ouse (top) 1 Left mouse button Press to perform specific mouse functions. 2 Wheel button Rotate the wheel to scroll up or down on the LCD screen.
To set up the wireless mouse Insert two AA batteries (supplied with the mouse) into the wireless mouse as shown. Inserting batteries into the wireless m ouse If your wireless mouse does not operate properly, the batteries may need to be replaced.
6. Place the optical mouse on an appropriate surface to enable tracking. Page 29.
Additional information about the wireless optical mouse The wireless optical mouse requires an ideal surface texture in order to provide precision pointing and tracking. Use surfaces such as plain paper, card stock, or fabric that have minimal repetitive patterns.
Using the Touch Pad Describing the Touch Pad A pointing device called a touch pad is located in front of the keyboard. You can point to, select, drag, and scroll objects on the screen using the built-in touch pad.
Using the Touch Pad Describing the Touch Pad A pointing device called a touch pad is located in front of the keyboard. You can point to, select, drag, and scroll objects on the screen using the built-in touch pad.
Locating and using the touch pad Locating the Touch Pad Touch Pad Action Description Sliding one finger Equivalent to using a mouse to place the pointer on an item. Tapping once Equivalent to pressing the left button once. Tapping twice Equivalent to pressing the left button twice.
Customizing the touch pad Sony Notebook Setup lets you customize, enable, or disable the touch pad. Open the Mouse Properties dialog box to set your touch pad and mouse preferences, such as changing pointers, enabling or disabling the tapping feature, clicking both buttons simultaneously, and adjusting the touch pad speed.
Using the Multilingual User Interface Language Option (Microsoft ® Windows ® XP Professional only) After you have initially setup your new VAIO ® computer, you can change the language displayed in Microsoft ® Windows ® XP Professional operating system.
Changing Numbers, Currency, Time, and Date Formats You can change your operating system's number, currency, time, and date formats to coordinate with your chosen country or language settings. To change these formats 1. Click Start on the Windows taskbar, and then click Control Panel .
Changing the Window Design of Sony Programs This feature changes the appearance, such as color, of certain Sony programs. To change the window design 1. Click Start , and then Control Panel . 2. In the left panel, click Switch to Classic View . 3. Double-click UI Design Selector .
Powering Your Computer Your VAIO ® computer comes with a battery and an AC adapter. This chapter explains how to install and use these supplied accessories to power your computer. It also describes ways you can efficiently utilize the battery as a power source.
Using AC Power The supplied battery is not charged when you receive your computer. To charge the battery and begin using the computer immediately, insert the battery into the computer and use the supplied AC adapter as a power source. The computer automatically charges the installed battery while it uses AC power.
Connecting the AC adapter To connect the AC adapter 1. Plug the AC adapter cable into the DC IN port. Connecting the AC Adapter to the Com puter 2. Plug the power cord into the AC adapter and an AC outlet. Use only the supplied AC adapter with your computer.
Turning on the computer To open and turn on the computer 1. Press the release button and lift the cover while holding the bottom of the computer firmly. Opening the Com puter 2. Press the power button until the green power indicator turns on. Turning on the Com puter If you continue to press the power button, the computer turns off.
Using the Battery Your computer, depending on the model you purchased, may come equipped with one battery bay and one multipurpose bay that supports a second battery. If your computer comes with two bays, you can purchase a second rechargeable battery to extend your computing time.
Using the Battery The supplied battery is not charged when you unpack it. To charge it for future use, install the battery, and then connect the AC adapter to power your computer. The battery charges from AC power regardless if the computer is on or off.
Inserting a battery To insert a battery 1. First turn the computer over so the bottom panel is facing up. 2. Slide the LOCK/UNLOCK switch to UNLOCK , and then slide the RELEASE switch in the direction of the arrow to lift the battery bay cover. Opening the Battery Bay 3.
Some programs and peripheral devices prevent the system from automatically entering Hibernate. If you are using battery power, save your data frequently to avoid data loss and manually activate a power saving mode. See Using power saving modes for more information.
R emoving a battery If you are not using the computer for an extended period of time, remove the battery from the computer to avoid damaging the battery. If the computer is on, connect the AC adapter and exit a power saving mode before you remove the battery.
Locating battery information Displaying the battery status provides useful information, such as remaining battery life. To view battery information 1. Click Start on the Windows ® taskbar, and click Control Panel . 2. Click Performance and Maintenance , and click Power Options .
Charging a battery You will need to charge the battery if battery power drops below 10 percent or you have not used the battery for a long time. The lithium-ion battery supplied with your computer may be recharged at any time, whether you wait until the battery is completely or partially discharged.
Notes on batteries Never leave the battery in temperatures above 140°F (60°C), such as under direct sunlight or in a car parked in the sun. While the battery is in use or being discharged, the battery heats up. This is normal and is not cause for concern.
Conserving Battery Power You may use the power saving modes and power schemes to conserve battery power. Conserving battery power may significantly extend your computing time, depending on how you use your computer.
Using power saving modes In addition to the normal operating mode, which allows you to turn off specific devices to save power, your computer has two distinct power saving modes: Standby and Hibernate. Use the Standby and Hibernate power saving modes to override a power profile setting and initiate immediate action.
Using power schemes You can use the preset power schemes or you can customize the power profiles to conserve power. By using the power schemes and power profiles, you control the power supplied to different devices, such as the computer screen (LCD) and the hard disk drive, in your computer.
For information about VAIO Power Management , click the Help button located toward the bottom of the VAIO Power Management tab. Alternately, click Start , select All Programs , then select VAIO Power Management , and click VAIO Power Management Help .
Locating power status information Displaying the power status provides useful information, such as remaining battery life. To view the Power Meter window 1. Double-click the Power icon. The Power Meter window appears. You can also rollover the Power icon to view the remaining battery charge.
Internet and Network Connections Internet Connections This section describes the basic steps for setting up your dial-up or Ethernet connection to the Internet. The New Connection Wizard guides you through the process of connecting to the Internet and choosing an Internet service provider (ISP) or setting up an existing account.
Internet and Network Connections Internet Connections This section describes the basic steps for setting up your dial-up or Ethernet connection to the Internet. The New Connection Wizard guides you through the process of connecting to the Internet and choosing an Internet service provider (ISP) or setting up an existing account.
Setting up a dial-up Internet connection Before you can connect to the Internet, you need to connect your computer to a telephone line via a telephone cable (not supplied). Once you set up your telephone cable, you're ready to connect to the Internet.
3. Click Next . If the Location Information dialog box appears, follow the on-screen instructions. 4. If it is not already selected, click to select Connect to the Internet , and click Next .
Setting up an Ethernet Internet connection Your computer accommodates both 10BASE-T and 100BASE-TX Ethernet connections, with data transfer speeds of between 10 and 100 Mbps. To connect an Ethernet cable 1. Locate the Ethernet port on your computer. For location information, see Locating Controls and Ports .
3. Click Next . If the Location Information dialog box appears, follow the on-screen instructions. 4. If it is not already selected, click to select Connect to the Internet , and click Next .
Customizing your Internet connection The Internet Properties dialog box enables you to change the way you view the Internet. You can change your home page, fonts, language, and colors. You can also regulate content and set browsing preferences. To open the Internet Properties dialog box 1.
Network Connections With a Sony computer, you can easily set up or connect to a variety of networks. The New Connection Wizard and Network Setup Wizard make it easy to gain access to networks (LANs) using wireless, Ethernet, or dial-up connections.
Using Ethernet and dial-up connections For setting up local area networks (LANs), Ethernet is a widely installed technology. Your computer accommodates both 10BASE-T and 100BASE-TX Ethernet connections, with data transfer speeds of between 10 and 100 Mbps.
3. Click Next . If you are prompted to the Local Information dialog box, follow the on-screen instructions. Only connect 10BASE-T and 100BASE-TX cables to the Ethernet port .
Using wireless network connections (selected models only) A wireless local area network (LAN) is a network in which you can connect to a LAN through a wireless (radio) connection. You can opt to purchase a Sony Wireless LAN Access Point to set up a LAN.
5. Follow the steps provided by the utility. To connect to a wireless network (Option 2) You may manually set up a wireless connection without the assistance of the VAIO Wireless Utility. 1. Make sure an access point is set up. See the instructions that accompanied the access point for more information.
6. Select the name of the wireless network to which you want to connect. If you do not see the network in the list, refresh the screen. For more information, see If the network does not appear in the list of available wireless networks. 7. When your computer locates the network, type the network key in the Network key box.
4. Type the name of the network (access point) you want to connect to in the Network name (SSID) box. The following steps are for networks that require a network key. If you do not know the network key or are not sure a network key is required, see the network administrator or the guide that accompanied your access point for more information.
Wireless Network Connection Properties 5. Click Add . The Wireless network properties dialog box appears. Wireless Network Properties 6. Type the name of the network you want to connect to in the Network name (SSID) box. 7. If available, make sure the Data encryption (WEP enabled) check box is selected.
16. Type the network key in the Network key and the Confirm network key boxes, and press Connect . Wireless Network Connection If you enter the network key incorrectly, the computer will appear to connect to the host computer but will be unable to communicate with the host computer or any other computer on the network.
Checking your network connection status Whether you have a wireless, Ethernet, or dial-up connection, you can check the status of that connection. To check your network connection status 1. Click Start on the taskbar, and click Control Panel , Network and Internet Connections , and Network Connections .
Bluetooth Connections Bluetooth ® wireless technology provides short-range connectivity without the need for cabling. When the Bluetooth functionality is turned on, your computer can exchange data and images with other compatible Bluetooth devices within a range of up to 32 feet.
Using Bluetooth technology Using Bluetooth ® technology, your computer can communicate with: Compatible devices with integrated Bluetooth functionality, such as computers, mobile telephones, personal digital assistants (PDAs), mice, and keyboards.
Establishing wireless connections The "Switch wireless devices" window enables you to select a wireless connection: Bluetooth, Wireless LAN, or Bluetooth and Wireless LAN function.
Add Bluetooth Dev ice Wizard Your computer will not detect a Bluetooth device unless the device is turned on and the Bluetooth function is enabled. Some keyboards and mice also require that you push a button located on the bottom of the device to enable connectivity.
12. Once you successfully connected to the Bluetooth Device, click Finish to close the wizard. Add Bluetooth Dev ice Wizard Page 76.
R enaming the Bluetooth USB Device The Bluetooth ® device installed on your computer has an assigned name that you may not recognize. Renaming this device makes it easy for you to identify your computer during authentication. To rename the Bluetooth USB device 1.
Setting Bluetooth preferences You have the option to set hardware preferences for discovery, connection, and notification. To access the Options window 1. Click Start , Control Panel , Printers and Other Hardware , and Bluetooth Devices . The Bluetooth Devices window appears.
Disconnecting a Bluetooth device To disconnect or remove a device 1. Click Start , Control Panel , Network and Internet Connections , and then click Bluetooth Devices . You may also click the Bluetooth icon on the Taskbar Notification area. 2. When the Bluetooth Devices window appears, select the Devices tab if it is not already selected.
Additional information The data transfer rate varies, depending on the following conditions: Obstacles, such as walls, located between devices Distance between devices Material used in.
CDs and DVDs Inserting and Ejecting CDs or DVDs Avoid using adhesive labels to identify your CDs or DVDs. Adhesive labels may damage the optical drive if they come off while the disc is in the drive. To insert a disc 1. Turn on the computer or exit a power saving mode (Standby or Hibernate) if one is active.
2. Close all programs that access the optical drive, and wait for the Busy indicator on the drive cover to turn off. 3. Press the Eject button on the drive cover to open the drive tray.
CDs and DVDs Inserting and Ejecting CDs or DVDs Avoid using adhesive labels to identify your CDs or DVDs. Adhesive labels may damage the optical drive if they come off while the disc is in the drive. To insert a disc 1. Turn on the computer or exit a power saving mode (Standby or Hibernate) if one is active.
2. Close all programs that access the optical drive, and wait for the Busy indicator on the drive cover to turn off. 3. Press the Eject button on the drive cover to open the drive tray.
Copying and Playing CDs and DVDs Your computer plays and records CDs and DVDs, depending on the model you purchased. Check your specifications for the type of optical drive installed on your computer and use the table below to see which types of media your optical drive supports.
Playing CDs Before you play an audio CD, you may need to enable your computer's audio feature. To enable the audio feature 1. Click Start on the Windows ® taskbar, and then click Control Panel , Performance and Maintenance , and System . The System Properties dialog box appears.
Page 87.
Copying files to CDs Before you copy files to a CD-RW or CD-R disc, read the following notes to avoid a computer malfunction and ensure the best results: Deactivate the screen saver and exit anti-virus software. Deactivate memory-resident disc utilities to avoid data loss.
Do not strike or shake the computer while writing data to a disc. 1 T he read/write drive letter des ignation may vary, depending on your s ys tem's hardware c onfiguration.
Playing DVDs You can play DVDs in your computer's optical drive and view the video on a TV or other multimedia display. Page 90.
Connecting your computer to a TV Your computer is equipped with an AV Out jack, which enables you to connect your computer to a TV. To locate the AV Out jack on your computer, see Locating Controls and Ports . To connect a TV to your computer 1. Connect one end of an audio-video (AV) cable (not supplied) into the A/V OUT jack.
3. Connect the other ends of an audio cable with double RCA plugs at each end into the appropriate jacks on your compatible TV. 4. Switch the TV input channel to external input. See the guide that accompanied your TV for information on how to switch to external input.
Playing DVDs on a TV Do not remove the optical drive when the computer is in a power saving mode (Standby or Hibernate). Doing so may cause the computer to malfunction. Connect the external optical drive if you plan to use one. To play a DVD 1. Close all open programs.
Disconnecting your computer from a TV Simply unplug the audio-video (AV) cable from the AV Out jack on the computer. Page 94.
Playing DVDs on your computer Your computer is equipped with an optical drive that enables you to watch DVDs and most DVD-R discs on your computer. To play a DVD 1. Close all open programs. 2. Insert the DVD into the optical drive. 3. Open a preinstalled DVD program, such as WinDVD ® software, by following these steps: 1.
Copying files to DVDs (on selected models only) Use the table shown on Copying and Playing CDs and DVDs to see which type of DVD media your computer supports. To copy files to a DVD-R or DVD-RW 1. Connect the AC adapter to the computer. See Connecting the AC adapter for more information.
Printer Connections Your computer is compatible with many popular printers. However, to ensure the best performance, printers must be compatible with the Microsoft ® Windows ® operating system installed on your computer.
Connecting a USB Printer You can connect a universal serial bus (USB) printer to your computer. The New Hardware Wizard enables you to easily install the printer software, but some printers require separate driver software installation. See the instructions that accompanied your printer for more information.
Connecting a Parallel Printer You can connect a parallel port printer to your port replicator if your computer came with one. The new hardware wizard enables you to easily install the printer software, but some printers require separate driver software installation.
To connect a parallel port printer 1. Plug the printer cable into the Printer port on your computer or port replicator, if applicable. See Locating Controls and Ports for more information. 2. Plug the other end of the printer cable into the port on the printer.
Configuring printer settings If you cannot connect the parallel port printer to the port replicator after following the instructions in To connect a parallel port printer , you may need to manually configure your printer settings. The following instructions explain how to configure your settings and complete the installation of your printer.
Disconnecting a Printer You can disconnect the printer cable when the computer is on or off. Disconnecting a printer when the computer is in a power saving mode (Standby or Hibernate) may cause the computer to malfunction. To disconnect a printer Unplug the printer cable from the computer.
Using Memory Stick Media Your VAIO ® computer is equipped with a Memory Stick ® slot that supports certain types of Memory Stick ® media. Page 103.
About Memory Stick media Memory Stick ® media are a compact, portable, and versatile data storage media designed for exchanging and sharing digital data with compatible devices.
Inserting Memory Stick media Before using Memory Stick ® media, back up important data. The media slot accommodates only one Memory Stick media at a time. To insert Memory Stick media 1. Insert the Memory Stick media with the arrow facing up and toward the Memory Stick media slot.
Viewing the contents Depending on the model you purchased, the Sony Memory Stick window may appear when you insert a Memory Stick ® media. From this window, you can choose to view, print, copy or organize your images or data stored on the Memory Stick media.
Protecting data on Memory Stick media Some Memory Stick ® media are equipped with a write-protect tab 1 . The write-protect tab prevents accidental changes to information recorded on your Memory Stick media. When you slide the write-protect tab to the LOCK position, your Memory Stick media is write-protected.
Formatting Memory Stick media Memory Stick ® media is formatted for immediate use when you purchase it. If you need to reformat Memory Stick media, use the Memory Stick Formatter that is provided with the media. For more information about using Memory Stick Formatter, refer to Formatter Help.
R emoving Memory Stick media If the Memory Stick ® media is removed prematurely, a blue screen with a message may appear prompting you to continue or exit. Reinsert the media into the slot and press Enter to continue. This enables the media to finish reading or writing data.
Floppy Disk Drives Using a Floppy Disk Drive You can connect a floppy disk drive to your computer. The floppy disk drive enables you to read or write data to a floppy disk.
Floppy Disk Drives Using a Floppy Disk Drive You can connect a floppy disk drive to your computer. The floppy disk drive enables you to read or write data to a floppy disk.
Connecting a floppy disk drive You can connect a floppy disk drive when your computer is on or off. Connecting the drive when the computer is in a power saving mode (Standby or Hibernate) may cause the computer to malfunction. To connect a USB floppy disk drive 1.
Inserting and removing floppy disks To write data to a disk, use one that is not write-protected or disable the write-protect feature. The floppy disk drive cannot write data to a disk if it is inserted into the drive improperly. To insert a floppy disk 1.
Protecting floppy disks Do not open the shutter manually or touch the surface of the floppy disk. Keep floppy disks away from magnets, direct sunlight, and heat sources.
Disconnecting a floppy disk drive You can disconnect a USB floppy disk drive when the computer is on or off. Disconnecting the drive when the computer is in a power saving mode (Standby or Hibernate) may cause the computer to malfunction. 1. Close all programs accessing the floppy disk drive.
Storing a floppy disk drive Fold the floppy disk drive cable and connector into the side compartment on the floppy disk drive. Storing a Floppy Disk Driv e Page 116.
Using PC Cards Your computer includes one PC Card slot. A PC Card enables you to connect devices such as an optical drive or floppy disk drive. See your VAIO ® Computer Specifications for the type of PC Card that is compatible with your computer. These slots are compatible with CardBus.
Inserting PC Cards Some PC Cards may require you to disable idle devices when using the PC Card. You can use Sony Notebook Setup to disable these devices.
To open Sony Notebook Setup 1. Click Start on the Windows taskbar, and then click All Programs . 2. Point to Sony Notebook Setup , and click Sony Notebook Setup .
To insert a PC Card 1. Make sure the front label of the PC Card is facing up. 2. Push the PC Card gently into the slot. The system automatically detects the PC Card. Do not force a PC Card into the slot; this may damage the connector pins. When a PC Card is inserted, do not place your computer in a bag or case.
Removing PC Cards You can remove PC Cards while the computer is on or off. PC Cards draw power from the computer when they are inserted into the PC Card slot, whether or not you use the card. If you are not using your PC Card and you are using a battery as a power source, remove the PC Card from the PC Card slot to conserve battery power.
To remove a PC Card while your computer is on 1. Double-click the Safely Remove Hardware icon on the taskbar. The Safely Remove Hardware dialog box appears. 2. Click to select the PC Card in the Hardware devices window, if it is not already selected. 3.
To remove a PC Card while the computer is off 1. Push the Release button once. The Release button pops out. 2. Push the Release button a second time. The PC Card pops out.
Audio and Video Connections Using i.LINK Digital Video Recorders You can connect a digital video (DV) recorder, such as an i.LINK ® 1 digital video camera recorder, to the i.
Audio and Video Connections Using i.LINK Digital Video Recorders You can connect a digital video (DV) recorder, such as an i.LINK ® 1 digital video camera recorder, to the i.
Connecting an i.LINK digital video recorder You can connect an i.LINK digital video (DV) recorder when the computer is on or off. Connecting the DV recorder when the computer is in a power saving mode (Standby or Hibernate) may cause the computer to malfunction.
Disconnecting the i.LINK digital video recorder You can disconnect the digital video recorder while the computer is on or off. Simply unplug the i.LINK cable from the i.LINK port on the computer. Disconnecting the cable when the computer is in a power saving mode (Standby or Hibernate) may cause the computer to malfunction.
Using a digital video camera recorder Your computer comes with preinstalled driver software that is compatible with most Sony digital video camera recorders. If you purchased a camera that comes with its own driver software, install these drivers before you use the camera.
Using Computer Monitors and Projectors You can connect an external display (such as a computer monitor or a projector) to your computer. Page 129.
Connecting a computer monitor Your computer can display images to the computer screen (LCD), to an external computer monitor, or to both the LCD and external monitor while your computer is on. To connect a computer monitor 1. Make sure the computer monitor is plugged into an AC outlet.
Connecting a multimedia device Connecting a Com puter Monitor You can connect a multimedia device, such as a multimedia computer monitor or projector, to your computer. Connecting a multimedia device enables you to display images on your computer screen (LCD), the multimedia device, or both.
4. Press the Fn + F7 key combination to toggle the display between your computer, the monitor, or both. See Selecting a display for more information. See the guide that accompanied your projector for more information on its installation and use.
Selecting a display Your computer comes with a Plug and Display feature, which enables you to connect an external display to the computer and instantly view an image on the connected display. An external display can be a projector, computer monitor, or TV.
Disconnecting a computer monitor or projector You can disconnect the external computer monitor or projector by unplugging the monitor (VGA) cable from your computer's port. Disconnecting the external display when the computer is in a power saving mode (Standby or Hibernate) may cause the computer to malfunction.
Using Speakers Your computer comes with built-in stereo speakers and selected models with an A/V port replicator come with external speakers. If your computer did not come with additional speakers and you wish to enhance the sound quality of your computer, shop Sony online at http://www.
Connecting speakers You can connect external speakers to your computer to enhance the sound quality of your computer. Do not place floppy disks on the speakers. The speakers' magnetic field may damage the data stored on the floppy disks. To connect speakers to your computer 1.
Disconnecting speakers You can disconnect external speakers when the computer is on or off. Simply unplug the speaker cable from the Headphone jack on the computer.
Adjusting the sound To increase and decrease the volume for playing CDs and DVDs, use the Volume buttons. You can also use the Mute button to enable and disable the sound.
Page 139.
Enabling the sound If you do not hear sound when playing a CD or DVD, the sound may be muted. Press the Mute button located above the keyboard. The Mute button toggles the audio output on and off. If you still cannot hear sound, you may need to enable the audio feature.
Using Microphones You can connect an external microphone to your computer to enhance the sound input to your computer. Make sure your microphone is designed for computer use. If you wish to purchase a microphone, shop Sony online at http://www.sonystyle.
Connecting a microphone Plug the microphone cable into the Microphone jack 1 on the computer. Connecting a Microphone See the guide that accompanied your microphone for more information on its installation and use. 1 A protruding dot loc ated next to the M ic rophone jac k dis tinguis hes this jac k from the H eadphone jac k.
Disconnecting a microphone You can disconnect an external microphone when the computer is on or off. Simply unplug the microphone cable from the Microphone jack on the computer.
Using a microphone to record sound You can record messages, memos, etc. by connecting a microphone to the Microphone jack 1 on your computer. To record from a microphone 1. Double-click the Volume icon on the Windows ® taskbar. The Volume Control window appears.
Connecting the Port Replicator Locating Ports and Jacks A port replicator is a device that attaches to your computer and contains additional jacks and ports, such as USB ports. A port replicator may come with your computer, depending on the model you purchased.
1 Composite Audio In jacks 8 Composite Audio Out jacks 2 Air vent 9 Composite Video Out jack 3 USB 2.0 ports 1 10 S Video Out port 4 Monitor (VGA) port 11 Printer port 5 DVI-D port 12 USB 2.
Connecting the Port Replicator Locating Ports and Jacks A port replicator is a device that attaches to your computer and contains additional jacks and ports, such as USB ports. A port replicator may come with your computer, depending on the model you purchased.
1 Composite Audio In jacks 8 Composite Audio Out jacks 2 Air vent 9 Composite Video Out jack 3 USB 2.0 ports 1 10 S Video Out port 4 Monitor (VGA) port 11 Printer port 5 DVI-D port 12 USB 2.
Connecting a Port Replicator Connect a port replicator to the computer while the computer is off. Use the AC adapter (not the battery) to power the computer while it is connected to a port replicator.
7. Plug the AC adapter into the DC IN port on the port replicator, and plug the power cord into the AC adapter and an AC outlet. The power indicator turns on. Connecting the AC Adapter to the Port Replicator You can charge the battery by installing it before you connect the port replicator.
Disconnecting the Port Replicator To disconnect the port replicator 1. Close any active programs to prevent data loss. 2. Turn off the computer and disconnect the power cord. 3. Slide the LOCK/UNLOCK switch to UNLOCK. 4. Lift the computer away from the port replicator.
Giga Pocket Personal Video Recorder Giga Pocket ® Personal Video Recorder is a suite of interactive Sony audio and video components that are designed to create, capture, and play back video files derived from television and your personal videos.
Introducing Giga Pocket Personal Video Recorder Giga Pocket ® Personal Video Recorder is a unique set of tools that enhance your VAIO ® computer's capabilities. Giga Pocket software gives you a wide range of video viewing, recording, and playback capabilities, such as: Watching and recording television programs from your computer.
Giga Pocket Personal Video R ecorder includes: Giga Pocket — This application enables you to watch TV programs on your computer's display and record them onto the hard disk drive as Video Capsules for later playback. Timer Recording Manager — The Timer Recording Manager keeps track of all TV program recordings you have scheduled.
About Giga Pocket Personal Video Recorder The information in this section provides guidelines to follow when using Giga Pocket ® Personal Video Recorder. Display setup Always set up your display as follows when you use Giga Pocket software: Color quality: Use factory default settings (32-bit).
Glossary The most common terms for Giga Pocket Personal Video Recorder software are defined below. Cabinet A cabinet acts as a container for Video Capsules in Giga Pocket Explorer. A network cabinet is located on other computers in a network environment.
Accessing Giga Pocket Help For more information about Giga Pocket, follow these steps: 1. Click Start in the Windows taskbar and point to All Programs .
Setting Up Giga Pocket Personal Video Recorder This section illustrates how to set up the cables and connections for your Giga Pocket ® Personal Video Recorder system. The hardware configuration of your computer may vary from the illustrations shown.
To set up TV connections The best method of connecting your computer system, TV monitor or display, and cable service access, depends on the type of cable connection available in your home. TV signal reception strength will vary widely depending on service availability in your area as well as the type of connection available.
Connecting to a standard antenna You can connect your Giga Pocket system to an indoor/outdoor antenna system, using Option 1 or Option 2 from the previous section, Connecting to standard cable access (CATV) .
Connecting with a cable or satellite set-top box (STB) You can connect your Giga Pocket ® system to cable service access that uses a set-top box (cable or satellite). When using the set-top box (STB) setup, you can only change channels through the STB, using its controls or supplied remote control.
2. Connect a second TV coaxial cable (optional) to the Out jack on your STB unit. Connect the other end to the VHF/UHF port on the rear of your TV monitor or display.
Setting up additional equipment This section illustrates how to set up additional equipment with the Giga Pocket ® Personal Video Recorder System. To connect a compatible VCR or camcorder Your VAIO ® computer has both audio and video connection capability.
Connecting the Giga Pocket R emote Control Your A/V port replicator comes with a remote control and speakers, which have a built-in infrared (IR) remote control receiver. The speakers must be plugged into one of the computer's USB ports in order to receive the signals from the remote control.
About the R emote Control Giga Pocket ® Personal Video Recorder features are controlled with the remote control. The remote control can start and stop video recording and playback, select channels, and set viewing preferences. This section describes the basic functions of your remote control.
(Note: The REC STOP function is available for Giga Pocket software only.) 4 REC button Press to begin recording. (Note: The REC function is available for Giga Pocket software only.) 5 TV button Press to change from the on-screen image to the TV/Recording deck.
10 STANDBY button Press to place the system into Stand by mode. (Note: You cannot place the computer into Stand by mode when certain Giga Pocket functions are running.) 11 AUDIO button Press to view available sound mode options on the monitor/display.
14 MENU button Press to view a shortcut menu of available options for a software program. Press again to hide this menu. (Note: For the Giga Pocket software program, the Select A Cabinet window displays. Press the button again to hide this window.) 15 TOOLS button The function of this button may vary between DVD media.
To set up the remote control Insert two AA batteries (supplied) into the remote control as shown. Inserting batteries into the rem ote control Under normal use, the AA batteries may last up to six months. If your remote control does not operate properly, the batteries may need to be replaced.
The infrared receiver must be visible in a line-of-sight with your remote control in order to function properly. Page 170.
Setting Up Giga Pocket Software Giga Pocket ® Personal Video Recorder software features and functions are detailed in this section, enabling you to begin viewing or recording TV programs.
Setting Up Giga Pocket Software Giga Pocket ® Personal Video Recorder software features and functions are detailed in this section, enabling you to begin viewing or recording TV programs.
Starting Giga Pocket software for TV Setup (For first time setup) 1. Verify that the computer time and date settings as displayed in the taskbar are correct. To adjust these settings: 1. Right-click on the time clock shown in the taskbar notification area.
If your computer is connected to the Internet, you can click Go to Web site... and download channel listings from the iEPG listing site. 6. Connect to the Internet. 7. Click Go to Web site... and download channel listings by clicking Download all Channel Settings .
Setting up your display (monitor) When using Giga Pocket ® Personal Video Recorder, set your display settings as follows: Colors — Use the default factory settings (32-bit). Screen area — Use the default video resolution. If you change the default settings, you may experience poor image quality on your display.
Giga Pocket Giga Pocket ® software enables you to watch a TV program on your computer display while recording it onto your hard disk drive. Using the Giga Pocket Slip Play feature, you can view a program from the beginning even while it is being recorded.
Starting Giga Pocket Software 1. Click Start in the Windows ® taskbar, point to All Programs , point to Giga Pocket , then click Giga Pocket . The Giga Pocket window appears. Giga Pocket window The current television broadcast is displayed, based on the selected channel.
Using the TV/R ecording deck and Playback deck Giga Pocket ® features two decks on the main interface window: the TV/Recording deck and the Playback deck. TV/Recording deck (detail) Use the TV/Recording deck to view programs and record Video Capsules.
R ecording a Video Capsule Giga Pocket software stores recorded images as Video Capsules. The Video Capsules provide file recording information, which can be viewed through Giga Pocket Explorer. Manage your Video Capsules with Giga Pocket Explorer. You cannot record a program into a previously recorded Video Capsule.
Using the Slip Play feature While a program is being recorded on the TV/Recording deck, you can watch that same program from the beginning, using the Playback deck. You can begin using Slip Play to view your recording, beginning approximately ten seconds after your recording session begins.
Additional information about Giga Pocket software Giga Pocket ® software can be used for external video recording. Depending on conditions, not all video images can be recorded or displayed. Video input from game consoles may not be recorded or displayed in Giga Pocket software.
Using the TV Program Web site Click Start in the Windows taskbar, point to All Programs , point to Giga Pocket, and then select Zap2it . You can also go directly to the Web site at http://www.sony.com/vaiotv . Timer recording using the Internet Electronic Program Guide service requires an Internet connection.
Timer Recording Wizard With the Timer Recording Wizard, you can set, adjust, and cancel the timer recording settings. Page 183.
Using the Timer R ecording Wizard 1. Click Start in the Windows taskbar, select All Programs , then select Giga Pocket . 2. Select Timer Recording Wizard . The Timer Recording Wizard dialog box appears. Tim er Recording Wizard 3. Select the desired option from the Select Timer Recording Settings menu and click Next .
Standard Play (SP) Standard recording mode (MPEG-2). High Quality (HQ) Image quality is improved, but recording requires more space on the hard disk drive as compared to using SP or LP recording modes (MPEG-2). New Tim er Recording - Set Stop Tim e and Recording Mode 6.
9. The New Timer Recording - Completed dialog box appears. Click Finish . New Tim er Recording - Com pleted Page 186.
Additional information about the Timer R ecording Wizard Timer recording requires approximately 30 seconds (pre-recording) preparation time prior to beginning each recording session. Please keep this in mind when setting up multiple, back-to-back recording sessions.
Timer Recording Manager The Timer Recording Manager keeps track of all scheduled TV recordings. Your computer settings, by default, are set to start Timer Recording Manager automatically when the computer is turned on. Timer recordings are being performed when the icon (Timer Recording Manager) is visible in the Windows taskbar.
Using the Timer R ecording Manager 1. Click Start in the Windows ® taskbar, select All Programs , select Giga Pocket , and then click All Software . 2.
Viewing your selected program recording schedule You can easily view the programs you have selected to record, using Giga Pocket ® Personal Video Recorder. The Timer Recording Manager feature enables you to change or cancel your timer recording at any time.
Additional information about the Timer R ecording Manager When creating a timer recording, it is important to remember the following information: The timer recording function is disabled if you turn your computer off. Your computer should be in Stand by or Hibernate mode, if the system is not in active use.
Giga Pocket Explorer The Giga Pocket Explorer application serves as a file manager for your Video Capsules. Video Capsules are managed in Cabinets. Giga Pocket Explorer enables you to play back Video Capsules using Giga Pocket.
Using Giga Pocket Explorer 1. Click Start in the Windows taskbar, point to All Programs , point to Giga Pocket , point to Giga Pocket Explorer . The Giga Pocket Explorer main window appears. 2. Click on the desired Cabinet to see a list of saved Video Capsules.
Accessing Click to DVD Help For additional information about using Click to DVD software features, follow these steps to access the Help. 1. Click Start in the Windows ® taskbar and point to All Programs . 2. Point to Click to DVD and click Click to DVD Help .
Accessing DVgate Plus Help For additional information about using DVgate Plus software features, follow these steps to access the Help. 1. Click Start in the Windows taskbar and point to All Programs . 2. Point to DVgate Plus and click DVgate Plus Help .
R ecording Video Capsules onto recordable DVD media You can record Video Capsules to recordable DVD media with the Make DVD feature. The Click to DVD software must be installed in order to burn Video Capsules to recordable DVD media. 1. From the Giga Pocket Explorer main window, select the Video Capsules you want to burn onto a recordable DVD.
Exporting Video Capsules You can export your Video Capsules as MPEG-1, MPEG-2, or AVI file formats for viewing on external media. 1. In the list area, right-click the Video Capsule you want to export. A shortcut menu appears. 2. Select Export . The Export dialog box appears.
Additional information about using Giga Pocket Explorer Video Capsules that are recorded using High Quality (HQ) or Standard Play (SP) mode can be converted and exported as MPEG-1, MPEG-2, and AVI files. If you wish to play your Video Capsule in a different system environment, you can convert and export your Video Capsule using MPEG- 1 format.
Using Network Cabinets Giga Pocket Explorer enables you to connect to Video Capsules in network cabinets located on other computers in a network. These network cabinets can be accessed through the Giga Pocket Explorer main window when you are connected to the network.
CLIÉ Converter The CLIÉ ® Converter is a plug-in application that enables the conversion of Video Capsules. You can convert your Giga Pocket ® Video Capsules and save to a Memory Stick ® media, or synchronize directly to your Sony ® CLIÉ ® handheld using the HotSync ® feature.
Starting CLIÉ Converter 1. Click Start in the Windows taskbar and point to All Programs . 2. Point to Giga Pocket , point to Plug-ins , and then click CLIÉ Converter .
Converting Video Capsules 1. From the Giga Pocket -> CLIÉ Converter window, click the Setting... button. The Settings dialog box appears. Enter your desired settings and click OK . 2. Start Giga Pocket Explorer as follows: 1. Click Start in the Windows taskbar, and then select All Programs .
Transferring converted video files to a Memory Stick media 1. Insert a Memory Stick ® media into the Memory Stick media slot on your computer. 2. From the Giga Pocket -> CLIÉ Converter main window, click to select the videos you want to transfer to the Memory Stick media.
Transferring converted video files using the HotSync operation You can transfer your converted video files directly to your CLIÉ ® handheld, when you start a HotSync ® operation. 1. From the Giga Pocket -> CLIÉ Converter main window, click to select the videos you want to transfer using the HotSync operation.
Internet Electronic Program Guide Service Internet Electronic Program Guide is a free, online service that enables quick and easy access to your local TV listings.
Setting up your Internet Electronic Program Guide service You must be connected to the Internet, before setting up your Internet Electronic Program Guide service. Sony recommends using Microsoft ® Internet Explorer as your Web browser to access the Internet Electronic Program Guide service.
Memory Upgrades Before you upgrade your computer's memory, read the safety information in Precautions and Procedures. For the type of module and amount of memory installed on your computer, refer to the VAIO ® Computer Specifications.
Precautions and Procedures Sony recommends that memory upgrades be performed by an authorized Sony Service Center. To find the nearest center or agent, go to: http://www.
Removing and Installing Memory Modules Make sure you read the safety information in Precautions and Procedures before you remove or install a memory module. When installing a memory module, do not open the module package until you are ready to install it.
Option 1 The following instructions illustrate how to remove the memory module located underneath the bottom panel of the computer. To remove a memory module 1. Turn off the computer and all attached devices. 2. Disconnect the power cord, all cables, and remove the battery if it is installed.
2. Push the module down until it snaps into place. 3. When the module is correctly seated, close the memory bay. 4. Replace the fastening screw(s) on the memory bay. 5. Make sure the system recognizes the new memory module. See Confirming Added Memory Capacity for more information.
Option 2 The following instructions illustrate how to remove the memory module located underneath the keyboard. To remove a memory module 1. Turn off the computer and all attached devices. 2. Disconnect the power cord, all cables, and remove the battery if it is installed.
7. Gently lift the keyboard up, bottom edge first, and turn it over gently toward the LCD screen. Do not detach the cable when lifting the keyboard. Lifting the keyboard 8. Touch a metal object (such as the connector panel on the back of your computer) to discharge static electricity.
To install a memory module 1. Remove the new memory module from its packaging, and install the memory module by sliding it into the open slot at a 45-degree angle. See To remove a memory module. Installing a New Mem ory Module 2. Push the module down until it snaps into place.
Confirming Added Memory Capacity After you have installed a new memory module, make sure the operating system recognizes it. To check your system's memory 1. Turn on the computer. 2. Click Start on the Windows ® taskbar, point to All Programs , and then point to Sony Notebook Setup .
Troubleshooting Computer What do I do if my computer won't start? Make sure the computer is securely plugged into a power source and turned on. Make sure the power indicator shows the power is on. Make sure the battery is inserted properly and charged.
Troubleshooting Computer What do I do if my computer won't start? Make sure the computer is securely plugged into a power source and turned on. Make sure the power indicator shows the power is on. Make sure the battery is inserted properly and charged.
Troubleshooting Computer What do I do if my computer won't start? Make sure the computer is securely plugged into a power source and turned on. Make sure the power indicator shows the power is on. Make sure the battery is inserted properly and charged.
What do I do if a BIOS error appears when my computer starts? If the message "Press <F1> to resume, <F2> to setup" appears at the bottom of the screen, follow these steps: 1. Press the F2 key . The BIOS Setup menu appears. 2. Set the date (month/day/year).
What do I do if the message "Operating system not found" appears when my computer starts, and why won't Windows start? Make sure the computer does not have a "non-bootable" floppy disk in the floppy disk drive (if applicable).
What do I do if my computer stops responding? It is best to turn off your computer using the Turn Off Computer option on the Microsoft ® Windows ® Start menu, located on the taskbar. Using other methods, including those listed below, may result in loss of unsaved data.
Why won't my computer enter Standby or Hibernate mode? Your computer may become unstable if the operating mode is changed before the computer completely enters Standby or Hibernate. To restore the computer to normal operating stability: 1. Close all open programs.
Why is the sound of my computer's fan so loud? The computer's fan may be running at a high speed to cool the CPU. By lowering the CPU speed, you also lower the speed and noise level of the computer's fan. You can use the power schemes to lower the CPU speed.
Why does the System Properties dialog box display a slower CPU speed than the maximum? This is normal. Because your computer's CPU utilizes a type of CPU speed controlling technology for power conservation purposes, System Properties may display the CPU's current speed instead of the maximum speed.
Why don't my changes appear on the computer screen (LCD)? You may need to refresh the computer screen. Press and hold the Windows key , and press D twice.
System Security This section provides information about keeping your computer operating smoothly and protecting against potential threats to your computer's security. How can I protect my computer against security threats, such as viruses? The Microsoft ® Windows ® operating system is preinstalled on your computer.
System Security This section provides information about keeping your computer operating smoothly and protecting against potential threats to your computer's security. How can I protect my computer against security threats, such as viruses? The Microsoft ® Windows ® operating system is preinstalled on your computer.
How do I keep my preinstalled antivirus software updated? You can keep the preinstalled Norton Internet Security software program current with the latest updates from Symantec Corporation. To download and install the latest security update 1. Double-click the Norton Internet Security icon in the Taskbar notification area.
Battery How do I know when the battery is charged? To determine the remaining battery charge, see Locating battery information. Page 229.
Battery How do I know when the battery is charged? To determine the remaining battery charge, see Locating battery information. Page 230.
When is the computer using AC power? When the computer is directly connected to the AC adapter, it uses AC power, even if a battery is installed. Page 231.
When should I recharge the battery? When the battery level falls below 10 percent. When both the battery and power indicators blink. When you have not used the battery for a long time.
When should I replace the battery? If the battery power is still low after charging it, the battery may be reaching the end of its life and should be replaced.
Should I be concerned that the installed battery is warm? No, it is normal for the battery to be warm when it is powering the computer. Page 234.
Can my computer enter Hibernate mode while using battery power? Your computer can enter Hibernate mode while using battery power, but some software programs and peripheral devices prevent the system from entering Hibernate mode.
Why doesn't my computer enter Hibernate mode? You may first need to enable Hibernate mode. Follow these steps: 1. Click Start on the Windows ® taskbar, and click Control Panel . 2. Click Performance and Maintenance , and click Power Options . The Power Options Properties window appears.
Internet Why doesn't my modem work? Make sure the telephone cable is securely plugged into the Modem jack on the computer and the wall jack. Make sure the telephone cable is working. Plug the cable into an ordinary telephone and listen for a dial tone.
Internet Why doesn't my modem work? Make sure the telephone cable is securely plugged into the Modem jack on the computer and the wall jack. Make sure the telephone cable is working. Plug the cable into an ordinary telephone and listen for a dial tone.
Why is my modem connection slow? Your computer is equipped with a V.90 compatible modem. Many factors may influence modem connection speed, including telephone line noise or compatibility with telephone equipment, such as fax machines or other modems.
Networking Why can't my computer connect to a wireless LAN access point? Connection availability is affected by distance and obstructions. You may need to move your computer away from obstructions or closer to any access point you may be using.
Networking Why can't my computer connect to a wireless LAN access point? Connection availability is affected by distance and obstructions. You may need to move your computer away from obstructions or closer to any access point you may be using.
Why can't I access the Internet? Check the access point settings. Refer to the instructions supplied with the access point. Make sure your computer and the access point are connected to one another. Move your computer away from obstructions or closer to any access point you may be using.
Why is the data transfer speed slow? The wireless LAN data transfer speed is affected by distance and obstructions between devices and access points.
Why is the communication speed interrupted or slowed down when MPEG2 data is transferred? The typical effective data transfer speed via an access point is 4-5 Mbps when adhering to the IEEE 802.11b standard or both the IEEE 802.11b and IEEE 802.11g standards (selected models only).
How do I avoid data transfer interruptions? When your computer is connected to an access point, data transfer interruptions may occur when using large files or if the computer is in close proximity to microwaves and cordless telephones. Move the computer closer to the access point.
Can I connect to an IEEE 802.11a device? Computers with built-in wireless LAN support the IEEE 802.11b standard only. Devices connecting to a wireless LAN using the IEEE 802.
What are channels? Wireless LAN communication occurs on divided frequency bands known as channels. Third-party wireless LAN access point channels may be preset to different channels from Sony devices. If you are using a wireless LAN access point, refer to connectivity information contained in your access point instructions.
When I change the encryption key, the network connection stops. What do I do? Two computers with built-in wireless LAN may loose a peer-to-peer network connection if the encryption key is changed. You can either change the encryption key back to the original profile or re-enter the key on both computers so the key matches.
Bluetooth Technology Why can't other Bluetooth devices discover my computer? Make sure both devices have the Bluetooth ® feature enabled. Your computer and the device may be too far apart. Wireless Bluetooth technology works best when the devices are within 32 feet (10 meters) of each other.
Bluetooth Technology Why can't other Bluetooth devices discover my computer? Make sure both devices have the Bluetooth ® feature enabled. Your computer and the device may be too far apart. Wireless Bluetooth technology works best when the devices are within 32 feet (10 meters) of each other.
Why can't other Bluetooth devices connect to my computer? Make sure the other device is authenticated. Your computer may not allow connections from other devices. To enable Bluetooth device connections, follow these steps: 1. From the Start menu, click Control Panel .
How will I know when another Bluetooth device is requesting authentication? A notification prompt appears on the Windows ® taskbar. To verify the notification feature is enabled, follow these steps: 1. From the Start menu, click Control Panel . 2. Click Printers and Other Hardware , and then click Bluetooth Devices .
Why is my Bluetooth connection slow? The 2.4 GHz radio frequency used by Bluetooth and wireless LAN devices is also used by other devices. Bluetooth devices incorporate technology that minimizes interference from other devices using the same wavelength, however, communication speed and connection range may be reduced.
Can I use a device equipped with Bluetooth technology on airplanes? With Bluetooth technology, your computer transmits a radio frequency of 2.4 GHz. Sensitive locations, such as hospitals and airplanes, may have restrictions on the use of Bluetooth devices, due to radio interference.
CDs and DVDs How do I maintain CDs and DVDs? Avoid touching the surface of the disc with your fingers. Fingerprints and dust on the surface of the disc may cause reading errors.
CDs and DVDs How do I maintain CDs and DVDs? Avoid touching the surface of the disc with your fingers. Fingerprints and dust on the surface of the disc may cause reading errors.
Why does my computer freeze when I try to read a disc? The disc your computer is trying to read may be dirty or damaged. Follow these steps: 1. Restart the computer by clicking Start , Turn Off Computer , and Restart . 2. Eject the disc from the optical drive.
What do I do if the drive tray won't open? Make sure the computer is on. Press the Eject button on the optical drive. If the Eject button does not work, click Start on the Windows ® taskbar, and click My Computer . Right click the optical drive icon, and select Eject from the shortcut menu.
What do I do if the optical drive isn't playing my CD or DVD properly? Make sure the disc was inserted into the drive with the label facing up. Make sure the necessary program(s) is installed according to the manufacturer's instructions.
Why did the computer screen (LCD) go blank? Your computer screen may go blank if the computer has lost power or has entered a power saving mode (Standby or Hibernate). If the computer is in LCD (Video) Standby mode, press any key to activate the computer screen.
Why can't I view the entire DVD video display on a TV screen? The display resolution may not be properly set. To adjust the display resolution, see Selecting a display for more information. It is recommended that you adjust the display resolution to 1024 x 768 or smaller, depending on the size of the external display screen.
How do I adjust the image on the TV screen? Use the controls on your external display to adjust the image. See the help guide that accompanied your display for more information.
How do I change the video resolution on the TV screen? The video may not appear on the entire TV screen if your computer resolution is set larger than 1024 x 768. Adjust the video resolution to 1024 x 768 or smaller. If you are using the A/V Out jack, plug the audio-video (AV) cable into the computer before you start the computer.
How do I switch the computer screen (LCD) from LCD to TV? Press the Fn+F7 keys to view the image on either the computer screen (LCD) or the TV. See Selecting a display for more information.
Printing Why can't I print a document? Make sure the printer is on, and the printer cable is securely connected to the ports on your printer and computer. Make sure the printer is compatible with the Microsoft ® Windows ® operating system installed on your computer.
Printing Why can't I print a document? Make sure the printer is on, and the printer cable is securely connected to the ports on your printer and computer. Make sure the printer is compatible with the Microsoft ® Windows ® operating system installed on your computer.
Microphone Why doesn't my microphone work? If you are using an external microphone, make sure the microphone is turned on and is properly plugged into the Microphone jack on the computer.
Microphone Why doesn't my microphone work? If you are using an external microphone, make sure the microphone is turned on and is properly plugged into the Microphone jack on the computer.
Mouse What do I do if the computer doesn't recognize the mouse? Make sure the mouse is securely plugged into the port. Restart the computer with the mouse connected to the computer.
Mouse What do I do if the computer doesn't recognize the mouse? Make sure the mouse is securely plugged into the port. Restart the computer with the mouse connected to the computer.
What do I do if the pointer doesn't move when I use the mouse? Make sure another mouse is not installed. If you are playing a disc, press the Ctrl + Alt + Delete keys simultaneously to stop playback and restart the computer. If you still cannot use the pointer, restart the computer.
Speakers Why won't my speakers work? Make sure the speakers are properly connected and the volume is turned up loud enough to hear sound. Your speakers may not be designed for computer use. If the speakers have a mute button, set the button to off.
Speakers Why won't my speakers work? Make sure the speakers are properly connected and the volume is turned up loud enough to hear sound. Your speakers may not be designed for computer use. If the speakers have a mute button, set the button to off.
Why can't I hear sound from my speakers? If the computer is using battery power, make sure the battery is properly inserted and is charged. If you are using a program that has its own volume control, make sure the volume control is properly set.
Why is the noise distorted when using Giga Pocket software? The Line In sound device may not be muted. Follow these steps: 1. Right-click the Volume icon on the Windows ® taskbar, and select Open Volume Control . The Volume Control window appears. 2.
Touch pad What do I do if the touch pad does not work? Try restarting your computer. Follow these steps: 1. Press the Windows key . 2. Press U . The Turn off computer window opens. 3. Press R to restart the computer. If the computer does not restart, follow these steps: 1.
Touch pad What do I do if the touch pad does not work? Try restarting your computer. Follow these steps: 1. Press the Windows key . 2. Press U . The Turn off computer window opens. 3. Press R to restart the computer. If the computer does not restart, follow these steps: 1.
How do I change the left and right button assignments? If your computer is interpreting a single-click as a double-click, you may want to change the button assignments. Follow these steps: 1. Click Start on the Windows ® taskbar and click Control Panel, and then click Printers and Other Hardware and Mouse.
Floppy Disks Why doesn't the Safely R emove Hardware icon appear on the taskbar when the drive is connected? The computer does not recognize the floppy disk drive. First, make sure the USB cable is properly connected to the USB port. If you need to secure the connection, wait a few moments for the computer to recognize the drive.
Floppy Disks Why doesn't the Safely R emove Hardware icon appear on the taskbar when the drive is connected? The computer does not recognize the floppy disk drive. First, make sure the USB cable is properly connected to the USB port. If you need to secure the connection, wait a few moments for the computer to recognize the drive.
Why is the drive unable to write data to a floppy disk? Make sure the floppy disk is properly inserted in the drive. See Inserting and removing floppy disks for instructions on how to insert the disk properly. If the disk is inserted properly and you are still unable to write data to it, the disk may be full or write-protected.
PC Cards Why doesn't my PC Card work? Make sure the PC Card is inserted properly. See Inserting PC Cards for more information. Make sure the PC Card is compatible with the Microsoft ® Windows ® operating system installed on your computer.
PC Cards Why doesn't my PC Card work? Make sure the PC Card is inserted properly. See Inserting PC Cards for more information. Make sure the PC Card is compatible with the Microsoft ® Windows ® operating system installed on your computer.
Why doesn't my computer recognize attached devices? For some PC Cards, if you alternate between normal power operation and the Standby or Hibernate modes while the card is inserted into the PC Card slot, the computer may not recognize the PC Card or the connected device.
Why can't I insert my PC Card? Make sure you are inserting the card correctly. See Inserting PC Cards for more information. You may not be able to use some PC Cards or some functions of the PC Card with this computer. Check the guide that accompanied your PC Card for more information on its use.
Audio/Video Why can't I use the DV recorder? You may not be able to use the DV recorder, and the message DV equipment seems to be disconnected or turned off may appear because the i.LINK ® 1 cable is not securely plugged into the ports on the computer or camera.
Audio/Video Why can't I use the DV recorder? You may not be able to use the DV recorder, and the message DV equipment seems to be disconnected or turned off may appear because the i.LINK ® 1 cable is not securely plugged into the ports on the computer or camera.
Giga Pocket Personal Video Recorder Why can't I see an image or an image that is displayed properly when I am using a VCR ? Some images from an externally-connected video player device or a video game console, may not display or are not displayed correctly.
Giga Pocket Personal Video Recorder Why can't I see an image or an image that is displayed properly when I am using a VCR ? Some images from an externally-connected video player device or a video game console, may not display or are not displayed correctly.
Why does my Giga Pocket viewing window or the images played back from a Video Capsule, appear distorted or corrupted? There are some situations where screen or image distortion may occur, such as: When you change the channel on the video player device.
Why does my system seem to slow down when I play a Video Capsule? Your computer may respond slower if you try to play back a Video Capsule while recording a TV program with Giga Pocket software.
Why did I get the error message, "Event buffer of audio overflow?" The timer recording may fail in certain situations, such as: The coaxial cable (input) is disconnected after recording has started. The TV channel has lost broadcast signal during the recording session.
Why did my on-screen display shift or split? Your on-screen display may shift or split in rare instances. If this should occur, switch the TV/Recording deck and the playback deck, or try switching the channel. Your timer recording continues even if the on-screen display has shifted or split.
Why can't I create new Video Capsules? You cannot create new Video Capsules when the remaining free space on your hard disk drive reaches approximately 100 MB. Delete any unnecessary Video Capsules or files to increase the free space on your hard drive.
Memory Stick Media Why can't I open my image files? You may need to reformat your Memory Stick ® media. Formatting Memory Stick media erases all data, including music data, previously saved to it. Before you reformat Memory Stick media, back up important data and confirm that the media does not contain files you want to keep.
Memory Stick Media Why can't I open my image files? You may need to reformat your Memory Stick ® media. Formatting Memory Stick media erases all data, including music data, previously saved to it. Before you reformat Memory Stick media, back up important data and confirm that the media does not contain files you want to keep.
Why can't I save music files onto my Memory Stick media? Copyright protected music cannot be checked out to any Memory Stick media other than MagicGate Memory Stick media. Using recorded music requires permission of the copyright holders.
Can I copy images from a digital video camera using Memory Stick media? Yes, and you can view video clips that you have recorded with Memory Stick media-compatible video camera recorders.
How do I prevent damage to the Memory Stick media? Do not use the media in locations that are subject to static electricity or electrical noise. Do not touch the media connector with your finger or metallic objects. Do not attach labels other than the supplied label to a media.
How do I extend the life of the Memory Stick media? Use the supplied storage case. See the instructions that came with your media for more information on its use.
Support Options The section contains information on where to go for answers to questions about your VAIO ® computer and the preinstalled software. Page 301.
Sony Support Information Refer to the following sources for answers in the sequence listed below. 1 VAIO ® Computer Documentation This on-screen VAIO ® Computer User Guide and the printed VAIO Computer Quick Start provide detailed information on how to maximize your computer's capabilities and solve common problems.
Program Support Information Depending on the computer model and particular configuration you purchased, your computer may not include all of the software programs listed below. Adobe ® Photoshop ® Elements, Photoshop ® Album, Premiere ® , Reader ® Adobe Systems Inc.
Giga Pocket ® Personal Video Recorder is a unique set of hardware and software components that provide you with excellent TV viewing, recording, and playback experiences. You can watch and record your favorite TV programs from your computer, create custom playlists, and play your Video Capsules on other compatible computers.
PictureGear Studio still image management software displays still images from your hard drive or a Sony digital still camera. The still images appear in a convenient light-table format so that you can easily view the contents of an entire folder, create your own photo albums, and make prints.
VAIO Action Setup manages the settings for your computer's shortcut keys. Web site http://www.sony.com/pcsupport Telephone 888-4-SONY-PC (888-476-6972) VAIO Edit Components Sony Electronics Inc.
Legal Information Notice © 2004 Sony Electronics Inc. Reproduction in whole or in part without written permission is prohibited. All rights reserved. This manual and the software described herein, in whole or in part, may not be reproduced, translated, or reduced to any machine-readable form without prior written approval.
Legal Information Notice © 2004 Sony Electronics Inc. Reproduction in whole or in part without written permission is prohibited. All rights reserved. This manual and the software described herein, in whole or in part, may not be reproduced, translated, or reduced to any machine-readable form without prior written approval.
END-USER LICENSE AGREEMENT FOR SONY AND CERTAIN THIRD PARTY SOFTWARE IMPORTANT-READ CAREFULLY: YOUR USE OF YOUR COMPUTER'S SOFTWARE CONSTITUTES AGREEMENT TO THIS LICENSE. This End-User License Agreement ("License") is a legal agreement between you and Sony Electronics Inc.
SOFTWAR E LICENSE The SOFTWARE is protected by copyright laws and international copyright treaties, as well as other intellectual property laws and treaties. The SOFTWARE is licensed, not sold. GRANT OF LICENSE This License grants you the following rights: Software — You may install and use one copy of the SOFTWARE on the COMPUTER.
DESCR IPTION OF OTHER R IGHTS AND LIMITATIONS Limitation on Reverse Engineering, Decompilation and Disassembly — You may not modify, reverse engineer, decompile, or disassemble the SOFTWARE in whole or in part. Separation of Components — The SOFTWARE is licensed as a single product.
COPYR IGHT All title and copyrights in and to the SOFTWARE (including but not limited to any images, photographs, animation, video, audio, music, text and "applets," incorporated into the SOFTWARE), and any copies of the SOFTWARE, are owned by SONY or its suppliers.
SOFTWARE is at your sole risk and you are responsible for installation of the SOFTWARE and use of the SOFTWARE on your COMPUTER. LIMITATION OF LIABILITY IN THIS SECTION, SONY AND SONY'S LICENSOR'S SHALL BE COLLECTIVELY REFERRED TO AS "SONY.
End-User License Agreement For Sony Software Giga Pocket software including PicoPlayer ® software CAREFULLY READ THE FOLLOWING AGREEMENT BEFORE USING THIS SOFTWARE.
COPYRIGHT All title and copyright in and to the SONY SOFTWARE (including but limited to any images, photographs, animation, video, audio, music, text and "applets", incorporated into the SONY SOFTWARE), and any copies of the SONY SOFTWARE, are owned by SONY or its suppliers.
This agreement shall be governed by the laws of the State of California, United States of America, without regards to conflict of laws provisions. Any dispute arising out of this Agreement shall be su.
Un punto importante, dopo l’acquisto del dispositivo (o anche prima di acquisto) è quello di leggere il manuale. Dobbiamo farlo per diversi motivi semplici:
Se non hai ancora comprato il Sony VGNA200 è un buon momento per familiarizzare con i dati di base del prodotto. Prime consultare le pagine iniziali del manuale d’uso, che si trova al di sopra. Dovresti trovare lì i dati tecnici più importanti del Sony VGNA200 - in questo modo è possibile verificare se l’apparecchio soddisfa le tue esigenze. Esplorando le pagine segenti del manuali d’uso Sony VGNA200 imparerai tutte le caratteristiche del prodotto e le informazioni sul suo funzionamento. Le informazioni sul Sony VGNA200 ti aiuteranno sicuramente a prendere una decisione relativa all’acquisto.
In una situazione in cui hai già il Sony VGNA200, ma non hai ancora letto il manuale d’uso, dovresti farlo per le ragioni sopra descritte. Saprai quindi se hai correttamente usato le funzioni disponibili, e se hai commesso errori che possono ridurre la durata di vita del Sony VGNA200.
Tuttavia, uno dei ruoli più importanti per l’utente svolti dal manuale d’uso è quello di aiutare a risolvere i problemi con il Sony VGNA200. Quasi sempre, ci troverai Troubleshooting, cioè i guasti più frequenti e malfunzionamenti del dispositivo Sony VGNA200 insieme con le istruzioni su come risolverli. Anche se non si riesci a risolvere il problema, il manuale d’uso ti mostrerà il percorso di ulteriori procedimenti – il contatto con il centro servizio clienti o il servizio più vicino.
