Manuale d’uso / di manutenzione del prodotto SPP-IM977 del fabbricante Sony
Vai alla pagina of 72
3-221-214- 12 (1) ©2000 Sony Corporation Operating Instructions SPP-IM977 US 2-Line Cor dless T elephone.
2 US Owner’s Record The model and the serial numbers are located at the bottom of the unit. Record the serial number in the space provided below. Refer to these numbers whenever you call upon your Sony dealer regarding this product. Model No. SPP-IM977 Serial No.
3 US 8. Do not allow anything to rest on the power cord. Do not locate this product where the cord will be abused by persons walking on it. 9. Do not overload wall outlets and extension cords as this can result in the risk of fire or electric shock. 10.
4 US 13. Avoid using a telephone (other than a cordless type) during an electrical storm. There may be a remote risk of electric shock from lightning. 14.
5 US Caution You are cautioned that any changes or modifications not expressly approved in this manual could void your authority to operate this equipment. Note This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules.
6 US Table of contents T able of contents Getting Started 8 Read this first 9 Step 1: Checking the package contents 10 Step 2: Setting up the base phone 14 Step 3: Preparing the battery pack 17 Step 4.
7 US Table of contents Caller ID Features 52 Understanding the Caller ID service 52 When you receive a call 53 Looking at the Caller ID list 53 Viewing the Caller ID list 54 Erasing data from the Call.
Getting Started 8 US Getting Started Base phone Read this first Before you use your phone, you must first set it up. Here’s a quick way to set up your phone: Steps 1, 2, 3 and 4. Step 2 (pages 10 to 13) Next, you need to do three things to set up the base phone, including finding the best location for the base phone.
Getting Started 9 US Getting Started Telephone line cords (3) Handset AC power adaptor (AC-T128) Wall bracket for base phone Base phone Rechargeable battery pack (BP-T23) Step 1 Checking the package contents Make sure you have received the following items in the package.
Getting Started 10 US Step 2 Away from television sets and other electronic equipment Away from a microwave oven Away from excessive moisture, extremely low temperatures, dust, mechanical vibration, o.
Getting Started 11 US Getting Started continued 1 Connect the telephone line cord to the L1/L1+L2 jack and to a telephone outlet. 2 Connect the AC power adaptor to the DC IN 9V jack and to an AC outlet. 3 Raise the antenna. Make sure it points towards the ceiling.
Getting Started 12 US Step 2: Setting up the base phone (continued) 1 Connect the telephone line cords to the L1/L1+L2 and L2 jacks and to the telephone outlets. 2 Connect the AC power adaptor to the DC IN 9V jack and to an AC outlet. 3 Raise the antenna.
Getting Started 13 US Getting Started Notes • Use only the supplied AC-T128 AC power adaptor. Do not use any other AC power adaptor. • Connect the AC power adaptor to a continuous power supply. • Place the base phone close to the AC outlet so that you can unplug the AC power adaptor easily.
Getting Started 14 US Pr eparing the battery pack Charge the battery pack for more than 12 hours before you start using your phone. 1 Slide open the battery compartment lid of the handset. 2 Insert the battery pack (with contacts facing down) into the battery compartment.
Getting Started 15 US Getting Started continued Battery duration A fully charged battery pack lasts for about: • Approx. 7 hours when you use the handset continuously • Approx. 7 days when the handset is in standby mode. Notes • The battery pack will gradually discharge over a long period of time, even when not in use.
Getting Started 16 US Step 3: Preparing the battery pack (continued) Handset spare battery usage As only one battery pack is supplied with this unit, it is necessary to purchase an additional battery pack (not supplied) for use as a handset spare battery pack.
Getting Started 17 US Getting Started Entering the area code When you use this phone for the first time, or move to an area that has a different area code, you must enter your home area code. Otherwise, you cannot use some functions of this phone and the Caller ID functions.
Getting Started 18 US 5 Enter three digits of your home area code using the dialing keys. 6 Press (PGM) . You will hear a long confirmation beep. Notes • If the home area code is already entered, it appears on the display in step 4. To enter a different home area code, see “To change the home area code” below.
Getting Started 19 US Getting Started 4 Select the number (” # 1“ to ” # 5“) to enter the local area code by turning Jog Dial. 5 Press Jog Dial. ”ENTER AREA CODE“ appears on the display. 6 Enter three digits of the local area code using the dialing keys.
Getting Started 20 US Identifying the parts Refer to the pages indicated in parentheses for details. 1 2 3 4 9 7 qf qg qh qj qk ql wd 5 0 ws wa qd qa 6 8 w; wf qs Base Phone 1 Display window (p. 24, 34, 52) 2 MESSAGES lamp (p. 61) Flashes when you have messages.
Getting Started 21 US Getting Started continued wh wk wg wj wl qj PGM (program) button (p. 34) Used to store numbers for speed dialing. qk REDIAL/PAUSE button (p. 28, 35) Redials the last number called/ inserts a pause in the dialing sequence. ql DIAL MODE switch (p.
Getting Started 22 US Identifying the parts (continued) 1 Antenna 2 Speaker 3 Jog Dial (p. 17, 37, 53) 4 LINE buttons (1, 2) (p. 24, 30) Lets you make or receive a call. 5 INTERCOM button (p. 45) Lets you talk by using the base phone and handset. 6 HOLD button (p.
Getting Started 23 US Getting Started qk ql qk qk qg REDIAL/PAUSE button (p. 28, 38) Redials the last number called/ inserts a pause in the dialing sequence. qh PGM (program) button (p. 17, 37) Used to store numbers in Phone Directory. qj Microphone qk I (HEADSET) jack (p.
Basics 24 US 1 Pick up the handset from the base phone. 2 Press (LINE 1) or (LINE 2) to select the line. The corresponding line button lights up. “TALK” appears on the display and the display also shows the talk time in hours, minutes and seconds.
Basics Basics 25 US To Adjust the handset volume Put a call on hold Switch to tone dialing temporarily Notes • When you increase the sound volume, in some cases the back ground noise may be increased as well. You should adjust the volume accordingly.
Basics 26 US Making calls (continued) If the battery becomes weak during a call The handset will beep every three seconds five times and E and “BATTERY LOW” appears on the display. Finish your call and charge the battery pack. For optimum performance, charge the battery for a full 12 hours.
Basics Basics 27 US Making calls through the speakerphone Press (LINE 1) or (LINE 2) on the base phone. “SPEAKERPHONE” appears on the display and the display also shows the talk time in hours, minutes and seconds. The corresponding line button lights up.
Basics 28 US Redialing 1 Press (LINE 1) or (LINE 2) to select the line. The corresponding line button lights up. 2 Press (REDIAL/PAUSE) to redial the last number dialed. Note If the number exceeds 32 digits or if it is erased, five short error beeps will alert you that the number cannot be redialed.
Basics Basics 29 US Making another call while talking Example: Making a call on line 2 while talking on line 1 1 Press (HOLD) while talking. The line 1 is put on hold and the LINE 1 button flashes slowly. 2 Press (LINE 2) . 3 Dial a phone number for the second party.
Basics 30 US 1 When you hear the phone ring, press (LINE 1) or (LINE 2) whichever button is flashing. The corresponding line button lights up. “TALK” appears on the display and the display also shows the talk time in hours, minutes and seconds.
Basics Basics 31 US Note If another call comes in by “call waiting” service while conversing with an outside caller, you will hear two short beeps.
Basics 32 US Receiving calls (continued) To Adjust the speaker volume Adjust the ringer volume of the base phone Put a call on hold Mute your voice Switch to another call (“call waiting” service*) * You need to subscribe to the service from your telephone company.
Basics Basics 33 US Receiving a call while talking If another call comes in while talking on the other line, the corresponding line button will flash. Example: Receiving a call on line 2 while talking on line 1 1 Press (HOLD) while talking. The line 1 is put on hold and the LINE 1 button flashes slowly.
34 US Telephone Features Storing phone numbers and names Example : to store “SONY” “123-4567”. 1 Press (PGM) . “PROGRAM” appears on the display. 2 Press (SPEED DIAL) . “ENTER 0 TO 9” appears on the display. 3 Press one of the dialing keys ( (0) to (9) ) to store a phone number on.
Telephone Features 35 US Telephone Features continued 5 Press (PGM) . “ENTER NUMBER” appears. 6 Enter the phone number. You can enter up to 32 digits, including a tone and a pause, each of which is counted as one digit. When the phone number of 17 digits or more has been entered , the phone number appears in two lines.
36 US Telephone Features Making calls with speed dialing 1 Press (LINE 1) or (LINE 2) to select the line. 2 Press (SPEED DIAL) . 3 Enter the desired speed dialing number ( (0) to (9) ). The phone number stored as the speed dialing number will be dialed.
Telephone Features 37 US Telephone Features You can dial a number by scrolling through the Phone Directory, in which up to 50 phone numbers can be stored. Storing phone numbers and names Example : to store “SONY” “123-4567”. 1 Press (PGM) . (Be sure not to press (LINE 1) and (LINE 2) .
38 US Telephone Features Phone Directory (continued) 4 Press (PGM) . “ENTER NUMBER” appears. 5 Enter the phone number. You can enter up to 32 digits, including a tone and a pause, each of which is counted as one digit. When the phone number of 17 digits or more has been entered, the phone number appears in two lines.
Telephone Features 39 US Telephone Features Changing a stored name and/or phone number 1 Display the name and phone number you want to change by doing steps 1 and 2 in “Making calls from the Phone Directory” on page 40. 2 Press Jog Dial. 3 Turn Jog Dial up to make “EDIT” flash and press Jog Dial.
40 US Telephone Features Erasing a memory location 1 Display the name and phone number you want to erase by doing steps 1 and 2 in “Making calls from the Phone Directory”. 2 Press Jog Dial. 3 Turn Jog Dial up to make “ERASE” flash and press Jog Dial.
Telephone Features 41 US Telephone Features Tips • You may press (LINE 1) or (LINE 2) to make a call instead of doing steps 3 and 4. • When you press Jog Dial in step 4, the vacant line is automatically connected. When neither line is in use, line 1 is connected.
42 US Telephone Features 1 Press (PGM) . 2 Turn Jog Dial up to make “RINGER” flash. 3 Press Jog Dial. 4 Turn Jog Dial to choose the line you want to set the ringer type. 5 Press Jog Dial. The current ringer type appears. 6 Press one of the dialing keys ( (1) to (4) ) to select a ringer type.
Telephone Features 43 US Telephone Features RINGER OFF SELECTED Turning off the ringer of the handset 1 Perform steps 1 to 5 on page 42. 2 Press (0) . You will hear a confirmation beep. 3 Press (OFF) . When “RINGER” is set to “RINGER OFF” The handset won’t ring.
44 US Telephone Features You can easily switch between the handset and speakerphone on the base phone without disconnecting the call. The call on line 1 will be switched to line 1 on another phone and that on line 2 is switched to line 2.
Telephone Features 45 US Telephone Features To talk from the base phone to the handset Press (INTERCOM) on the base phone. The base phone and handset ring and “ ** PAGING ** ” appears on the display. When a person at the handset presses (INTERCOM) , you can talk with each other.
46 US Telephone Features Note While conversing with an outside caller via the base phone or handset, you cannot make an intercom call. If you press (INTERCOM) , you will hear a busy tone. Tips • You can receive an intercom call on the handset even when “RINGER” is set to “RINGER OFF”.
Telephone Features 47 US Telephone Features You can transfer a call between the handset and base phone without disconnecting the call. To transfer from the base phone to the handset 1 Press (INTERCOM) to page the handset. The call is put on hold on the base phone and the handset rings.
48 US Telephone Features To transfer from the handset to the base phone 1 Press (INTERCOM) to page the base phone. The call is put on hold on the handset. After the base phone rings twice, you will be connected automatically. When a person at the base phone answers, you can talk with each other.
Telephone Features 49 US Telephone Features continued Having a confer ence call You can talk on two lines at the same time and you can also talk on one line, the handset and the base phone at the same time. Making another call while talking You can talk with two parties at the same time using both line 1 and line 2.
50 US Telephone Features Having a conference call (continued) Receiving a call while talking If another call comes in while talking, the LINE 1 or LINE 2 button on which another call is coming will flash. 1 Press (HOLD) . The line in use is put on hold.
Telephone Features 51 US Telephone Features Switching conference from the handset to the base phone 1 Press (HOLD) on the handset to put both lines on hold. The LINE 1 and LINE 2 buttons on the handset and the base phone flash. 2 Press (CONF) on the base phone to resume the conversation.
52 US Caller ID Features Understanding the Caller ID service Caller ID allows the caller’s phone number to be shown on the display before the call is answered. In order to use this feature, you must first subscribe to the Caller ID service. The name of this service may vary depending on your telephone company.
Caller ID Features 53 US Caller ID Features Looking at the Caller ID list The phone stores the data of the last 20 calls received including “OUT OF AREA” and “PRIVATE” calls. It keeps track of all calls received; even if they were not answered.
54 US Caller ID Features Looking at the Caller ID list (continued) About the “ * ” mark “ * ” appears if there are more than two calls from the same phone number. The older data will be replaced by the new data, so the calls are counted as only one call.
Caller ID Features 55 US Caller ID Features To erase the entire list at once 1 Display any Caller ID data. 2 Press Jog Dial. 3 Turn Jog Dial up to make “ERASE” flash and press Jog Dial. 4 Turn Jog Dial up to make “ALL” flash, then press Jog Dial.
56 US Caller ID Features Using the Caller ID list By using the Caller ID list, you can call back a phone number from the Caller ID list easily, or store numbers from the Caller ID list into the Phone Directory. Calling back a number from the Caller ID list 1 Display the phone number you want to call from the Caller ID list (see page 53).
Caller ID Features 57 US Caller ID Features Storing a number of the Caller ID list into the Phone Directory 1 Display the name and phone number you want to store from the Caller ID list (see page 53). 2 Confirm the number and press Jog Dial. 3 Turn Jog Dial up to make “PGM” flash and press Jog Dial.
58 US Caller ID Features To change the number of digits of the phone number If the number of digits of the phone number in the Caller ID list is different from the actual phone number, you need to adjust the number of digits of the phone number to call back or store into the Phone Directory .
Caller ID Features 59 US Caller ID Features When the local area code matches 2 Continue the operation to call or store the phone number with the correct number of digits (pages 56 and 57). Notes • You need to adjust the number of digits each time you call back from the Caller ID list as the changes to the Caller ID data is not stored in memory.
60 US Caller ID Features Using “Caller ID with call waiting” service This telephone is compatible with the “Caller ID with call waiting” service. Make sure that your telephone company offers this service. Like the basic Caller ID service, you need to subscribe to “Caller ID with call waiting” in order to use this service.
Caller ID Features 61 US Caller ID Features Using visual message waiting service If you subscribe to your telephone company’s message service which includes this feature, the display will show that you have messages waiting to be retrieved. If you have messages The MESSAGES lamp on the base phone flashes.
62 US Caller ID Features If you move or change your telephone company Message waiting signals are sent in one of two ways: FSK signaling or “stutter” signaling (Your telephone company can provide you with more information about your service).
Additional Information Additional Information 63 US Mounting the base phone on a wall 1 Raise the hang-up tab. 2 Plug the telephone line cord(s) to the L1/L1+L2, and/or L2, DATA jack(s) and the AC power adaptor to the DC IN 9V jack, and hook the cords.
Additional Information 64 US Carrying the handset by the belt clip You can hang the handset on the belt by attaching the belt clip to the handset. Attaching the belt clip Press the belt clip to the handset. Make sure that the side tabs click and go into the holes on the sides of the handset.
Additional Information Additional Information 65 US Notes on power sour ces On battery pack • Store the battery pack at a temperature between 41°F (5°C) and 95°F (35°C) for best performance.
Additional Information 66 US Maintenance • Clean the cabinets with a soft cloth slightly moistened with water or a mild detergent solution. Do not use any type of abrasive pad, scouring powder or solvent such as alcohol or benzine as they may damage the finish of the cabinet.
Additional Information Additional Information 67 US Symptom You hear five short error beeps when you press (LINE 1) or (LINE 2) . You hear no dial tone. The phone does not connect at all, even though the number you dial is correct. The phone does not redial correctly.
Additional Information 68 US Symptom You hear interference during conversation. Your conversation is muted and “CHANNEL SEARCHING...” appears on the display. You hear a beep every three seconds and E and “BATTERY LOW” appear on the display. LINE 1 or 2 button flashes when not in use.
Additional Information Additional Information 69 US Symptom The caller’s name and/or phone number does not appear on the display during call waiting. You cannot dial the number from the Caller ID list. The memory match function does not work. You cannot use visual massage waiting service.
Additional Information 70 US General Frequency band 902 - 928 MHz Operating channel 30 channels Dial signal Tone, 10 PPS (pulse) selectable Supplied accessories See page 9. Handset Power source Rechargeable battery pack BP-T23 Battery charging time Approx.
Additional Information 71 US Additional Information Index A Adjusting volume handset volume 25, 30 speaker volume 27, 32 Area code 17 B Battery pack charging 14 duration 15 Belt clip 64 C Call waiting.
Sony Corporation Printed in China For the customers in the USA Be sure to save the receipt and attach it to your WARRANTY card when having your equipment repaired at an authorized Sony service station.
Un punto importante, dopo l’acquisto del dispositivo (o anche prima di acquisto) è quello di leggere il manuale. Dobbiamo farlo per diversi motivi semplici:
Se non hai ancora comprato il Sony SPP-IM977 è un buon momento per familiarizzare con i dati di base del prodotto. Prime consultare le pagine iniziali del manuale d’uso, che si trova al di sopra. Dovresti trovare lì i dati tecnici più importanti del Sony SPP-IM977 - in questo modo è possibile verificare se l’apparecchio soddisfa le tue esigenze. Esplorando le pagine segenti del manuali d’uso Sony SPP-IM977 imparerai tutte le caratteristiche del prodotto e le informazioni sul suo funzionamento. Le informazioni sul Sony SPP-IM977 ti aiuteranno sicuramente a prendere una decisione relativa all’acquisto.
In una situazione in cui hai già il Sony SPP-IM977, ma non hai ancora letto il manuale d’uso, dovresti farlo per le ragioni sopra descritte. Saprai quindi se hai correttamente usato le funzioni disponibili, e se hai commesso errori che possono ridurre la durata di vita del Sony SPP-IM977.
Tuttavia, uno dei ruoli più importanti per l’utente svolti dal manuale d’uso è quello di aiutare a risolvere i problemi con il Sony SPP-IM977. Quasi sempre, ci troverai Troubleshooting, cioè i guasti più frequenti e malfunzionamenti del dispositivo Sony SPP-IM977 insieme con le istruzioni su come risolverli. Anche se non si riesci a risolvere il problema, il manuale d’uso ti mostrerà il percorso di ulteriori procedimenti – il contatto con il centro servizio clienti o il servizio più vicino.
