Manuale d’uso / di manutenzione del prodotto SLV-ED70MN del fabbricante Sony
Vai alla pagina of 55
Video Cassette Recor der ©1999 by Sony Corporation SL V -ED70MN Operating Instructions G 3-865-382- 12 (1) P AL NTSC 1/00-01_SLV-ED70MN.12E 1/17/01, 2:28 PM 3.
Introduction 2 SL V -ED70MN (E) 3-865-382-11 (1) WARNING T o prevent fire or shock hazar d, do not expose the unit to rain or moisture. T o avoid electrical shock, do not open the cabinet. Refer servicing to qualified personnel only . The mains lead must only be changed at a qualified service shop.
3 Introduction SL V -ED70MN (E) 3-865-382-11 (1) T able of contents Getting Started Getting Started 4 Step 1: Unpacking 5 Step 2: Setting up the r emote commander 6 Step 3: Connecting the VCR 8 Step 4.
4 Getting Started SL V -ED70MN (E) 3-865-382-11 (1) • Remote commander • R6 (size AA) batteries Getting Started • Aerial cable Step 1 Unpacking Check that you have received the following items with the VCR: 3/04-18_SLV-ED70MN.
5 Getting Started Getting Started SL V -ED70MN (E) 3-865-382-11 (1) Step 2 Setting up the r emote commander Inserting the batteries Insert two R6 (size AA) batteries by matching the + and – on the batteries to the diagram inside the battery compartment.
6 Getting Started SL V -ED70MN (E) 3-865-382-11 (1) IN OUT AERIAL OUT IN AERIAL Step 3 AERIAL IN AERIAL IN Mains lead to mains AERIAL OUT Aerial cable (supplied) : Signal flow LINE-1 OUT LINE IN Audio/video cable (not supplied) 1 Disconnect the aerial cable from your TV and connect it to AERIAL IN on the rear panel of the VCR.
7 Getting Started Getting Started SL V -ED70MN (E) 3-865-382-11 (1) T o a stereo system Y ou can improve sound quality by connecting a stereo system as shown on the right. Note • T o listen to playback sounds in stereo, you must use either of the connections above.
8 Getting Started SL V -ED70MN (E) 3-865-382-11 (1) SP APC RF CHANNEL RF CHANNEL Step 4 T uning your TV to the VCR If you have connected your VCR to the TV using the audio/video cable, skip this step. PROGRAM +/ – RF CHANNEL 1/u ON/ST ANDBY If your TV system is Select B/G G II D/K K 1 Press 1/u ON/ST ANDBY to turn on the VCR.
9 Getting Started Getting Started SL V -ED70MN (E) 3-865-382-11 (1) SONY VIDEO CASSETTE RECORDER 5 T une the TV to the same channel as that shown in the display window so that the picture on the right appears on the TV screen. Refer to your TV manual for tuning instructions.
10 Getting Started SL V -ED70MN (E) 3-865-382-11 (1) LANGUAGE / ENGLISH SELECT END : [ OK ] • : [] LANGUAGE / 123 456 789 0 LANGUAGE / ENGLISH • : : [ ] [ OK ] PLAY OK MENU PLAY OK Selecting a language Y ou can change the on-screen display language from English to Arabic.
11 Getting Started Getting Started SL V -ED70MN (E) 3-865-382-11 (1) SP APC Step 6 1 Press ONE T OUCH TUNING on the VCR for more than 3 seconds. The VCR starts the channel presetting. The W AIT indicator goes off when all receivable channels ar e preset.
12 Getting Started SL V -ED70MN (E) 3-865-382-11 (1) OK > / . / ? / / MENU Step 6: Presetting channels (continued) Presetting all r eceivable channels automatically Before you start … • T urn on the VCR and the TV . • Set the TV to the video channel.
13 Getting Started Getting Started SL V -ED70MN (E) 3-865-382-11 (1) 4 Press > / . to move the cursor ( ” ) to AUTO PRESET , then press OK. All receivable channels ar e preset in numerical sequence. When no more receivable channels can be found, presetting stops and the pictur e from the lowest numbered channel is displayed on the TV screen.
14 Getting Started SL V -ED70MN (E) 3-865-382-11 (1) Presetting channels manually 1 Press MENU, then pr ess > / . to move the cursor ( ” ) to TUNER PRESET and press OK. 2 Press > / . / ? / / to move the cursor ( ” ) to NORMAL/CA TV , then select NORM.
15 Getting Started Getting Started SL V -ED70MN (E) 3-865-382-11 (1) TUNER PRESET PROG14 NORMAL / CATV SYSTEM AUTO PRESET CHANNEL SET AFT FINE TUNING NORM ON • • CATV B / G • D / K I OFF 2 1 SELECT SET : [] : [ ] Selected programme position 4 Press PROG +/– to select the pr ogramme position.
16 Getting Started SL V -ED70MN (E) 3-865-382-11 (1) PROG14 – – – –– – – – TUNER PRESET NORMAL / CATV SYSTEM AUTO PRESET CHANNEL SET AFT FINE TUNING NORM ON • • CATV B / G • D / K I OFF 3 5 SET : [ ] Disabling unwanted programme positions After tuning the TV channels, you can disable unused pr ogramme positions.
17 Getting Started Getting Started SL V -ED70MN (E) 3-865-382-11 (1) CLOCK SET 1 . 1 . 1 9 9 9 FR 0 : 0 0 SELECT SET END : [ OK ] : [] : [ ] CLOCK SET 2.
18 Getting Started SL V -ED70MN (E) 3-865-382-11 (1) CLOCK SET 2 . 1 . 1999 S A 52 5 : 3 0 1 SELECT SET END : [ OK ] : [] : [ ] PLAY OK PLAY OK 4 Set the year , hour and minutes in sequence, using / to flash the item to be set, and > / . to select the digits.
Basic Operations 19 Basic Operations SL V -ED70MN (E) 3-865-382-12(1) 123 456 789 0 Basic Operations Playing a tape 1 T urn on your TV and set it to the video channel. 2 Insert a tape. The VCR turns on and starts playing automatically if you insert a tape with its safety tab removed.
Basic Operations 20 SL V -ED70MN (E) 3-865-382-12(1) PLAY OK To Stop play Pause play Resume play after pause Fast-forward the tape Rewind the tape Eject the tape T o set the colour system If streaks appear during playback, pr ess COLOR SYSTEM on the VCR to conform to the system that the tape was recor ded in.
Basic Operations 21 Basic Operations SL V -ED70MN (E) 3-865-382-12(1) SP APC T o use the time counter At the point on the tape that you want to find later , press COUNTER RESET . The counter in the display window resets to “0:00:00.” Sear ch for the point afterwards by r eferring to the counter .
Basic Operations 22 SL V -ED70MN (E) 3-865-382-12(1) T ur ning on the VCR and TV , and starting playback automatically (T rinitron TV Synchr o Play) Y ou can only use this function if your TV is made by Sony (T rinitron TV).
Basic Operations 23 Basic Operations SL V -ED70MN (E) 3-865-382-12(1) 123 456 789 0 SP APC Recor ding TV pr ogrammes 1 T urn on your TV and set it to the video channel. 2 Insert a tape with its safety tab in place. 3 Press PROG +/– to select the pr ogramme position you want to recor d.
Basic Operations 24 SL V -ED70MN (E) 3-865-382-12(1) REC SP APC S E :: 2 2 – 00 0 LP APC SP/LP (SP/EP) Recording TV pr ogrammes (continued) 4 Press SP/LP (SP/EP) to select the tape speed, SP or LP . LP (Long Play) provides r ecording time twice as long as SP (Standard Play), however , SP produces better pictur e and audio quality .
Basic Operations 25 Basic Operations SL V -ED70MN (E) 3-865-382-12(1) T o record NTSC colour system pr ogrammes NTSC colour signals can be recor ded on this VCR from the LINE-1 IN, LINE-2 IN and LINE-3 IN (SA T IN) jacks only .
Basic Operations 26 SL V -ED70MN (E) 3-865-382-12(1) SP STOP APC SP APC START SP APC START Recor ding TV programmes using the easy timer Y ou can record one pr ogramme on the same day (within 24 hours) with the easy timer . If the VCR clock has not been set, you can set the clock before setting the timer recor ding.
Basic Operations 27 Basic Operations SL V -ED70MN (E) 3-865-382-12(1) continued 4 Set the recor ding stop time in the same way as in step 2, then press the EASY TIMER knob. A programme number flashes. 5 T urn the EASY TIMER knob clockwise or counterclockwise to select the programme you want to r ecord.
Basic Operations 28 SL V -ED70MN (E) 3-865-382-12(1) 123 456 789 0 SP APC CLOCK START 1 • When “–:– –” is displayed in the display window , press EASY TIMER. • T o change the clock setting, press the EASY TIMER knob on the VCR for more than thr ee seconds.
Basic Operations 29 Basic Operations SL V -ED70MN (E) 3-865-382-12(1) SP APC START 3 Press the EASY TIMER knob to confirm the clock setting. The VCR enters the timer recor ding setting mode. T o continue the easy timer setting, go to step 2 in “Setting the easy timer” on page 26.
Basic Operations 30 SL V -ED70MN (E) 3-865-382-12(1) T o stop recor ding T o stop the VCR while recording, press p STOP . T o check or change the timer setting Press EASY TIMER knob r epeatedly until the setting you want to check or change flashes. Then r e-enter the new setting, if necessary .
Basic Operations 31 Basic Operations SL V -ED70MN (E) 3-865-382-12(1) 123 456 789 0 TIMER SET / CHECK SA 25 .1 DATE START STOP PROG – . –– – : –– – : –– –– – – . –– – : –– – : –– –– – – . –– – : –– – : –– –– – – .
Basic Operations 32 SL V -ED70MN (E) 3-865-382-12(1) • ON/ STANDBY PLAY OK PLAY OK T o record the same pr ogramme every day or the same day every week, press .
Additional Operations 33 SL V -ED70MN (E) 3-865-382-11(1) Playing/sear ching at various speeds Additional Operations Playback options V iew the picture during fast- forward or rewind Play at high speed Play at twice the normal speed Play in slow motion Play frame by frame Rewind and start play T o resume normal playback Press · PLA Y .
Additional Operations 34 SL V -ED70MN (E) 3-865-382-11(1) Using the CLICK SHUTTLE ring W ith the CLICK SHUTTLE ring, you can operate a variety of playback options.
Additional Operations 35 SL V -ED70MN (E) 3-865-382-11(1) 123 456 789 0 Recor ding TV pr ogrammes using the quick timer After starting recor ding in the normal way , you can have the VCR stop recor ding automatically after a specified duration. QUICK TIMER 1 While recor ding, press QUICK TIMER once.
Additional Operations 36 SL V -ED70MN (E) 3-865-382-11(1) SYNCHRO REC SP/LP (SP/EP) Synchr onised recor ding The Synchronised Recor ding feature enables you to recor d from the connected equipment such as a satellite tuner , a cable TV decoder or a TV that has a timer function.
Additional Operations 37 SL V -ED70MN (E) 3-865-382-11(1) 3 Press SP/LP (SP/EP) to select the tape speed (SP or LP for the P AL colour system, and SP or EP for the NTSC colour system.) 4 Hold SYNCHRO REC down for more than two seconds. The SYNCHRO REC button lights up and the unit stands by for recor ding.
Additional Operations 38 SL V -ED70MN (E) 3-865-382-11(1) TIMER SET / CHECK SA DATE START STOP PROG . 6 1 7: 0 0 8:0 0 6 SP . 8 1 1 : 00 0 : 00 50 MO – 0 :1 2 3 :0 0 2 2 7 3: 0 0 0: 0 0 L –. – – – : –– – : –– –– – –. – – – : –– – : –– –– – –.
Additional Operations 39 SL V -ED70MN (E) 3-865-382-11(1) 3 Press > / . to select the setting you want to change or cancel: • T o change the setting, press ? / / to flash the item you want to change, and press > / . to re-set it. Then, press / r epeatedly until the cursor ( ” ) appears at the beginning of the line.
Additional Operations 40 SL V -ED70MN (E) 3-865-382-11(1) T o listen to Main Sub Main and sub On-screen display MAIN SUB MAIN/SUB Recor ding stereo and bilingual pr ogrammes In ZWEITON (German stereo) system This VCR automatically receives and r ecords stereo and bilingual programmes based on the ZWEIT ON system.
Additional Operations 41 SL V -ED70MN (E) 3-865-382-11(1) Display window STEREO STEREO STEREO No indicator T o listen to Main Sub Main and sub Standard sound* Bilingual programme * Usually the main so.
Additional Operations 42 SL V -ED70MN (E) 3-865-382-11(1) Sear ching using the index function The VCR marks the tape with an index signal at the point where each r ecording begins. Use these signals as refer ences to find a specific recor ding. The VCR can search up to 99 index signals ahead of or behind the current position.
Additional Operations 43 SL V -ED70MN (E) 3-865-382-11(1) About Adaptive Picture Contr ol (APC) Adaptive Picture Contr ol (APC) automatically improves r ecording and playback quality by adjusting the VCR to the condition of the video heads and tape.
Additional Operations 44 SL V -ED70MN (E) 3-865-382-11(1) SET UP MENU AUDIO MIX APC PAL / MESECAM PAL AUTO MESECAM SELECT SET • ON OFF • NICAM • • ON OFF HIFI AUDIO STD : [] : [ ] Menu option AUDIO MIX HIFI AUDIO APC P AL/MESECAM Changing menu options 1 Press MENU, then select SET UP MENU.
Editing 45 SL V -ED70MN (E) 3-865-382-11(1) Connecting to a VCR or ster eo system How to connect to r ecord on this VCR How to connect to a stereo system Connect LINE-2 IN AUDIO on this VCR to the audio output jacks on the stereo system, using the RK-C510KS audio cable (not supplied).
Editing 46 SL V -ED70MN (E) 3-865-382-11(1) Basic editing (when r ecording on this VCR) Before you start editing • T urn on your TV and set it to the video channel. • Press INPUT SELECT or PROG +/– to display “L1”, “L2” or “L3” in the display window .
Editing 47 SL V -ED70MN (E) 3-865-382-11(1) 123 456 Audio dubbing This feature lets you r ecord over the normal audio track. The monaural sound previously r ecorded is placed while the original hi-fi sound remains unchanged. Use this feature to add commentary to a tape that you have recor ded with a camcorder .
48 Additional Information SL V -ED70MN (E) 3-865-382-11 (1) T roubleshooting Symptom The ON/ST ANDBY switch does not function. The power is turned on but the VCR does not operate. The clock has stopped and “–:– –” lights in the display window .
49 Additional Information SL V -ED70MN (E) 3-865-382-11 (1) Recording Symptom No TV programmes appear on the TV screen. TV reception is poor . The recor ded picture has no colour or unusual colours. The tape starts playing as soon as it is inserted. The tape is ejected when you press r REC.
50 Additional Information SL V -ED70MN (E) 3-865-382-11 (1) T roubleshooting (continued) Symptoms caused by contaminated video heads Sapphire tape cleaner The unit incorporates a sapphire tape cleaner which cleans a video tape when it is loaded.
51 Additional Information SL V -ED70MN (E) 3-865-382-11 (1) Specifications System Colour system P AL, MESECAM, NTSC 3.58, NTSC 4.43 TV system B/G, D/K, I Channel coverage B/G: VHF E2 to E12/UHF E21 to.
52 Additional Information SL V -ED70MN (E) 3-865-382-11 (1) Index to parts and contr ols Front panel Refer to the pages indicated in parentheses ( ) for details.
53 Additional Information SL V -ED70MN (E) 3-865-382-11 (1) STEREO NICAM SP EP LP STOP APC START CLOCK NTSC PAL Display window 8 APC (Adaptive Picture Contr ol) indicator (43) 9 T racking indicator (4.
54 Additional Information SL V -ED70MN (E) 3-865-382-11 (1) Remote commander 1 TV / VIDEO remote contr ol switch (5) 2 6 EJECT button (20) 3 DISPLA Y button (24) 4 TRINITRON TV SYNCHRO PLA Y button (2.
A, B Accessories supplied 4 Adjusting picture 16, 33, 43 tracking 33, 43 Aerial hookup 6 AFT (Auto Fine T uning) 16 APC (Adaptive Picture Control) 43 Audio dubbing 47 Audio track 40 A V (audio/video) .
Un punto importante, dopo l’acquisto del dispositivo (o anche prima di acquisto) è quello di leggere il manuale. Dobbiamo farlo per diversi motivi semplici:
Se non hai ancora comprato il Sony SLV-ED70MN è un buon momento per familiarizzare con i dati di base del prodotto. Prime consultare le pagine iniziali del manuale d’uso, che si trova al di sopra. Dovresti trovare lì i dati tecnici più importanti del Sony SLV-ED70MN - in questo modo è possibile verificare se l’apparecchio soddisfa le tue esigenze. Esplorando le pagine segenti del manuali d’uso Sony SLV-ED70MN imparerai tutte le caratteristiche del prodotto e le informazioni sul suo funzionamento. Le informazioni sul Sony SLV-ED70MN ti aiuteranno sicuramente a prendere una decisione relativa all’acquisto.
In una situazione in cui hai già il Sony SLV-ED70MN, ma non hai ancora letto il manuale d’uso, dovresti farlo per le ragioni sopra descritte. Saprai quindi se hai correttamente usato le funzioni disponibili, e se hai commesso errori che possono ridurre la durata di vita del Sony SLV-ED70MN.
Tuttavia, uno dei ruoli più importanti per l’utente svolti dal manuale d’uso è quello di aiutare a risolvere i problemi con il Sony SLV-ED70MN. Quasi sempre, ci troverai Troubleshooting, cioè i guasti più frequenti e malfunzionamenti del dispositivo Sony SLV-ED70MN insieme con le istruzioni su come risolverli. Anche se non si riesci a risolvere il problema, il manuale d’uso ti mostrerà il percorso di ulteriori procedimenti – il contatto con il centro servizio clienti o il servizio più vicino.
