Manuale d’uso / di manutenzione del prodotto SLV-ED10ME del fabbricante Sony
Vai alla pagina of 47
Video Cassette Recor der ©1999 by Sony Corporation SL V -ED10ME/MJ/MPS/PS/SG Operating Instructions 3-865-387- 14 (1) PAL NTSC.
Introduction 2 W ARNING T o prevent fir e or shock hazard, do not expose the unit to rain or moisture. T o avoid electrical shock, do not open the cabinet. Refer servicing to qualified personnel only . The mains lead must only be changed at a qualified service shop.
3 Introduction T able of contents Getting Started Getting Started 4 Step 1: Unpacking 5 Step 2: Setting up the r emote commander 6 Step 3: Connecting the VCR 7 Step 4: T uning your TV to the VCR 9 Ste.
4 Getting Started • Remote commander • R6 (size AA) batteries Getting Started • Aerial cable • Plug adaptor (SL V -ED10ME/MJ only) Step 1 Unpacking Check that you have received the following items with the VCR: Checking your model name The instructions in this manual are for the 5 models: SL V -ED10ME, ED10MJ, ED10MPS, ED10PS and ED10SG.
5 Getting Started Getting Started Step 2 Setting up the r emote commander Inserting the batteries Insert two R6 (size AA) batteries by matching the + and – on the batteries to the diagram inside the battery compartment. Insert the negative (–) end first, then push in and down until the positive (+) end clicks into position.
6 Getting Started Step 3 Connecting the VCR Connect the aerial to your VCR and TV as shown below to watch TV pr ogrammes and VCR pictures on your TV . In addition, if your TV has audio/video (A/V) input jacks, we recommend you connect the VCR to your TV using an audio/video cable to get a better pictur e and sound.
7 Getting Started Getting Started Step 4 T uning your TV to the VCR If you have connected your VCR to the TV using the audio/video cable, skip this step. PROGRAM +/– RF CHANNEL 1/u ON/ST ANDBY If your TV system is Select B/G G II D/K K 1 Pr ess 1/u ON/ST ANDBY to turn on the VCR.
8 Getting Started 5 T une the TV to the same channel as that shown in the display window so that the picture on the right appears on the TV screen. Refer to your TV manual for tuning instructions. If the pictur e does not appear clearly , see “T o obtain a clear picture fr om the VCR” below .
9 Getting Started Getting Started Selecting a language Y ou can change the on-screen display language from English to Arabic. Before you start… • T urn on your TV and set it to the video channel. Step 5 1 Pr ess ON/STANDBY to turn on the VCR. 2 Pr ess MENU, then press > / .
10 Getting Started Step 6 1 Pr ess ONE TOUCH TUNING on the VCR for more than 3 seconds. The VCR starts the channel pr esetting. The W AIT indicator goes of f when all receivable channels are preset. T o check if the channels ar e preset correctly Set the TV to the video channel and pr ess PROGRAM +/– on the VCR.
11 Getting Started Getting Started Presetting all r eceivable channels automatically Before you start… • T urn on the VCR and the TV . • Set the TV to the video channel. 1 Pr ess MENU, then press > / . to move the cursor ( ” ) to TUNER PRESET and pr ess OK.
12 Getting Started Step 6: Presetting channels (continued) 4 Pr ess > / . to move the cursor ( ” ) to AUT O PRESET , then pr ess OK. All r eceivable channels are preset in numerical sequence. When no mor e r eceivable channels can be found, pr esetting stops and the picture from the lowest number ed channel is displayed on the TV scr een.
13 Getting Started Getting Started Presetting channels manually 1 Pr ess MENU, then press > / . to move the cursor ( ” ) to TUNER PRESET and pr ess OK. 2 Pr ess > / . / ? / / to move the cursor ( ” ) to NORMAL/CA TV , then select NORM. T o preset CA TV channels, select CA TV .
14 Getting Started Step 6: Presetting channels (continued) Selected pr ogramme position Channel coverage VHF UHF CA TV (TV distribution) System B/G E2–E12 E21–E69 S1–S41, S01–S05 System I SA4–SA13 B21–B69 S1–S41, S01–S05 System D/K R1–R12 R21–R69 – PLAY OK PLAY OK PLAY OK 4 Pr ess PROG +/– to select the programme position.
15 Getting Started Getting Started Disabling unwanted pr ogramme positions After tuning the TV channels, you can disable unused pr ogramme positions. The disabled positions will be skipped later when you press the PROG +/– buttons. 1 In step 5 on page 14, press ? / / repeatedly to display the number “0” beside CHANNEL SET .
16 Getting Started Setting the clock Y ou must set the time and date on the VCR to be able to use the timer recor ding featur es properly . Before you start… • T urn on the VCR and the TV . • Set the TV to the video channel. Step 7 MENU OK > / .
17 Getting Started Getting Started 4 Set the year , hour and minutes in sequence, using / to flash the item to be set, and > / . to select the digits. 5 Pr ess OK to start the clock. Tip • T o change the digits during setting, pr ess ? to return to the item to be changed, and select the digits using > / .
Basic Operations 18 Basic Operations Playing a tape 1 T urn on your TV and set it to the video channel. 2 Insert a tape. The VCR turns on and starts playing automatically if you insert a tape with its safety tab r emoved. 3 Pr ess · PLA Y . When the tape reaches the end, it will r ewind automatically .
Basic Operations 19 Basic Operations To Stop play Pause play Resume play after pause Fast-forward the tape Rewind the tape Eject the tape T o set the colour system If streaks appear during playback, pr ess COLOR SYSTEM on the VCR to conform to the system that the tape was r ecorded in.
Basic Operations 20 T o use the time counter At the point on the tape that you want to find later , pr ess COUNTER RESET . The counter in the display window resets to “0:00:00.” Search for the point afterwards by referring to the counter . Playing a tape (continued) SP APC T o display the counter on the TV screen, pr ess DISPLA Y .
Basic Operations 21 Basic Operations T urning on the VCR and TV , and starting playback automatically (T rinitron TV Synchr o Play) Y ou can only use this function if your TV is made by Sony (T rinitron TV).
Basic Operations 22 Recor ding TV pr ogrammes 1 T urn on your TV and set it to the video channel. 2 Insert a tape with its safety tab in place. 3 Pr ess PROG +/– to select the programme position you want to r ecor d. 4 Pr ess SP/LP (SP/EP) to select the tape speed, SP or LP .
Basic Operations 23 Basic Operations 5 Press r REC to start recor ding. The r ecording indicator lights up red in the display window . T o stop recor ding Press p STOP . T o check the remaining tape length Press DISPLA Y . The white bar indicates the appr oximate length of tape remaining.
Basic Operations 24 T o r ecord NTSC colour system programmes NTSC colour signals can be r ecorded through the line input (LINE IN) only . Display “L” in the display window using INPUT SELECT or PROG +/– in step 3. For tape speed, select SP or EP in step 4.
Basic Operations 25 Basic Operations Recording TV pr ogrammes using the easy timer Y ou can recor d one programme on the same day (within 24 hours) with the easy timer . If the VCR clock has not been set, you can set the clock befor e setting the timer recor ding.
Basic Operations 26 Recor ding TV programmes using the easy timer (continued) 4 Set the r ecording stop time in the same way as in step 2, then pr ess the EASY TIMER knob. A programme number flashes. 5 T urn the EASY TIMER knob clockwise or counter clockwise to select the programme you want to r ecord.
Basic Operations 27 Basic Operations 1 • When “–:– –” is displayed in the display window , pr ess EASY TIMER. • T o change the clock setting, press the EASY TIMER knob on the VCR for mor e than three seconds. The CLOCK indicator and the curr ent clock setting appear in the display window .
Basic Operations 28 Recor ding TV programmes using the easy timer (continued) 3 Pr ess the EASY TIMER knob to confirm the clock setting. The VCR enters the timer r ecording setting mode. T o continue the easy timer setting, go to step 2 in “Setting the easy timer” on page 25.
Basic Operations 29 Basic Operations T o stop r ecording T o stop the VCR while recor ding, press p STOP . T o check or change the timer setting Pr ess EASY TIMER knob repeatedly until the setting you want to check or change flashes. Then r e-enter the new setting, if necessary .
Basic Operations 30 Setting the timer manually Y ou can preset up to eight programmes at a time. Before you start… • Check that the VCR clock is set to the correct time. • Insert a tape with its safety tab in place. Make sure the tape is longer than the total recor ding time.
Basic Operations 31 Basic Operations T o record the same pr ogramme every day or the same day every week, press . while the date is flashing. For details, see “Daily/ weekly recor ding” below . T o record fr om a source connected to the LINE IN jack; pr ess INPUT SELECT or PROG +/– to display “L” in the “PROG” position.
Additional Operations 32 Playing/sear ching at various speeds Additional Operations Playback options V iew the picture during fast- forward or rewind Play at high speed Play in slow motion Play frame by frame Rewind and start play T o r esume normal playback Pr ess · PLA Y .
33 Additional Operations Recording TV pr ogrammes using the quick timer After starting recor ding in the normal way , you can have the VCR stop recor ding automatically after a specified duration. QUICK TIMER 1 While recor ding, press QUICK TIMER once.
Additional Operations 34 Checking/ changing/ cancelling timer settings Before you start… • T urn on your TV and set it to the video channel. 1 Press ON/ST ANDBY to turn on the VCR. 2 Press MENU, then select TIMER SET/CHECK: • If you want to change a setting, go on to the next step.
35 Additional Operations 3 Press > / . to select the setting you want to change or cancel: • T o change the setting, press ? / / to flash the item you want to change, and pr ess > / . to r e-set it. Then, press / repeatedly until the cursor ( ” ) appears at the beginning of the line.
Additional Operations 36 About Adaptive Pictur e Control (APC) Adaptive Pictur e Control (APC) automatically impr oves recording and playback quality by adjusting the VCR to the condition of the video heads and tape.
37 Additional Operations Changing menu options 1 Press MENU, then select SET UP MENU. 2 Press > / . to select the option to change, then press ? / / to change the setting. 3 Press OK to return to the original scr een. Menu choices Initial settings ar e indicated in bold print.
Additional Operations 38 Editing with another VCR How to connect to r ecord on this VCR Notes • Make sur e you connect the plugs to jacks of the same colour . • If you connected this VCR to both the LINE IN and LINE OUT jacks of the other VCR, select the input corr ectly to pr event a humming noise.
39 Additional Operations Operation (when r ecording on this VCR) Before you start editing • T urn on your TV and set it to the video channel. • Press INPUT SELECT or PROG +/– to display “L” in the display window . • Press SP/LP (SP/EP) to select the tape speed (SP or LP for the P AL system, and SP or EP for the NTSC system).
40 Additional Information T roubleshooting Additional Information If you have any questions or problems not cover ed below , please consult your nearest Sony service facility . Power Clock Playback Symptom The ON/ST ANDBY switch does not function. The power is turned on but the VCR does not operate.
41 Additional Information Recording Symptom No TV programmes appear on the TV screen. TV r eception is poor . The recor ded pictur e has no colour or unusual colours. The tape starts playing as soon as it is inserted. The tape is ejected when you press r REC.
42 Additional Information T roubleshooting (continued) Sapphire tape cleaner The unit incorporates a sapphire tape cleaner which cleans a video tape when it is loaded. This cleaner can prevent the video heads from contamination by r emoving dust or mold fr om a tape with the sapphire edge.
43 Additional Information Specifications System Colour system PAL, MESECAM, NTSC 3.58, NTSC 4.43 TV system B/G, D/K, I Channel coverage B/G: VHF E2 to E12/UHF E21 to E69/ CA TV S01 to S05, S1 to S41 D.
44 Additional Information Index to parts and contr ols Fr ont panel Refer to the pages indicated in parentheses ( ) for details. 1 1/u ON/ST ANDBY switch/ indicator (7) 2 T ape compartment 3 0 3 REW (.
45 Additional Information Display window 7 T racking indicator (36) 8 Colour system indicator (19) 9 T ime counter/clock/line/ programme/TV system indicator (7, 20, 22, 26, 39) 0 T ape/recor ding indi.
46 Additional Information 1 TRINITRON TV SYNCHRO PLA Y button (21) 2 6 EJECT button (19) 3 TV/VIDEO button (for TV) (5) 4 DISPLA Y button (23) 5 VOL (volume) +/– buttons (for TV) 6 EASY TIMER button.
Sony Corporation A, B Accessories supplied 4 Adjusting pictur e 15, 32, 36 tracking 32, 36 Aerial hookup 6 AFT (Auto Fine T uning) 15 APC (Adaptive Pictur e Control) 36 A V (audio/video) connection 6 .
Un punto importante, dopo l’acquisto del dispositivo (o anche prima di acquisto) è quello di leggere il manuale. Dobbiamo farlo per diversi motivi semplici:
Se non hai ancora comprato il Sony SLV-ED10ME è un buon momento per familiarizzare con i dati di base del prodotto. Prime consultare le pagine iniziali del manuale d’uso, che si trova al di sopra. Dovresti trovare lì i dati tecnici più importanti del Sony SLV-ED10ME - in questo modo è possibile verificare se l’apparecchio soddisfa le tue esigenze. Esplorando le pagine segenti del manuali d’uso Sony SLV-ED10ME imparerai tutte le caratteristiche del prodotto e le informazioni sul suo funzionamento. Le informazioni sul Sony SLV-ED10ME ti aiuteranno sicuramente a prendere una decisione relativa all’acquisto.
In una situazione in cui hai già il Sony SLV-ED10ME, ma non hai ancora letto il manuale d’uso, dovresti farlo per le ragioni sopra descritte. Saprai quindi se hai correttamente usato le funzioni disponibili, e se hai commesso errori che possono ridurre la durata di vita del Sony SLV-ED10ME.
Tuttavia, uno dei ruoli più importanti per l’utente svolti dal manuale d’uso è quello di aiutare a risolvere i problemi con il Sony SLV-ED10ME. Quasi sempre, ci troverai Troubleshooting, cioè i guasti più frequenti e malfunzionamenti del dispositivo Sony SLV-ED10ME insieme con le istruzioni su come risolverli. Anche se non si riesci a risolvere il problema, il manuale d’uso ti mostrerà il percorso di ulteriori procedimenti – il contatto con il centro servizio clienti o il servizio più vicino.
