Manuale d’uso / di manutenzione del prodotto RCD-W500C del fabbricante Sony
Vai alla pagina of 40
©2003 Sony Corporation Operating Instructions Owner’s Record The model and serial numbers are located on the rear of the unit. Record the serial number in the space provided below. Refer to them whenever you call upon your Sony dealer regarding this product.
2 WARNING To prevent fire or shock hazard, do not expose the unit to rain or moisture. To prevent fire, do not cover the ventilation of the apparatus with newspapers, table-cloths, curtains, etc.
3 T able of Contents Getting Started Unpacking ............................................. 6 Hooking Up the System ........................ 6 This Unit Can Use the Following Discs 7 Basic Operations Playing a CD .....................................
4 On condensation in the unit If the unit is brought directly from a cold to a warm location, or is placed in a very damp room, moisture may condense on the lenses inside the unit.
5 Note on High-Speed Synchro-Recording When recording a CD, certain conditions may cause the sound to dropout, noise in the recording, or even unwanted tracks on the CD-R or CD-RW. If this happens, clean the CD as described in “On cleaning” above, and record to the CD-R or CD-RW using normal speed Synchro-Recording only.
6 Hooking Up the System This section describes how to hook up the unit to an amplifier. Be sure to turn off the power of each component before making the connections.
7 Getting Started Connecting the AC power cord Connect the AC power cord to a wall outlet. Notes • Be sure to place the player on a flat, horizontal place. If the player is left on a slanted position, it may cause a malfunction or damage the player.
8 Playing a CD This unit has two decks. In this manual, the CD player section is just called DECK A, and the CD-R and CD-RW recording section is called DECK B. When using the remote, set DECK A/DECK B to DECK A to operate DECK A (the CD player section), or to DECK B to operate DECK B (the CD-R or CD-RW recording section).
9 Basic Operations Playing a disc with MP3 files About MP3 files MP3 (MPEG 1 Audio Layer-3) is a standard technology and format for compressing a sound sequence. The file is compressed to about 1/10 of its original size. Sounds outside the range of human hearing are compressed while the sounds we can hear are not compressed.
10 The playback order of the MP3 files The playback order of the folders and files is as follows: Tree1 Tree2 Tree3 Tree4 Tree5 Notes • This player cannot read the MP3 files if the file name does not end with the extension “.mp3”. • Folders that do not include MP3 files are skipped.
11 Basic Operations Tip To specify a desired playback order, before the folder or file name, input the order by number (e.g., “01”, “02”), then record contents onto a disc.
12 Tips • The function of AMS control changes according to the ALBUM SELECT indicator in the display. When the indicator is off, the AMS control selects tracks. When the indicator lights up, the AMS control selects albums. Press ALBUM to turn the ALBUM SELECT indicator on or off.
13 Basic Operations Using the Display You can check information about the disc using the front panel display. When using the remote, set DECK A/DECK B to DECK A to operate DECK A, or to DECK B to operate DECK B. Changing the display Press DISPLAY while the unit is stopped or playing.
14 Display while recording Press TIME repeatedly while recording. Each time you press the button, the display for DECK B changes as follows: CD TOC TEXT CD TEXT CD - RW DECK A REC DISC ALBUM TRACK DEC.
15 Basic Operations Display for disc information of DECK B The indicators show which type of recordable disc is in the disc tray, and whether the recordable disc has been already finalized. The CD/CD-R/RW indicator When you put a CD or finalized CD-R in the disc tray, “CD” lights up.
16 Locating a Particular Point in a T rack Z You can locate a particular point in a track during playback or playback pause. When using the remote, set DECK A/DECK B to DECK A to operate DECK A, or to DECK B to operate DECK B.
17 Basic Operations Playing T racks/Discs Repeatedly (Repeat Play) Z You can play tracks repeatedly in any play mode. When using the remote, set DECK A/DECK B to DECK A to operate DECK A, or to DECK B to operate DECK B. Repeating all tracks on the disc Press REPEAT repeatedly until “REP” lights up in the display, and then press H .
18 Playing in Random Order (Shuffle Play) You can have the unit “shuffle” tracks and play them in random order. When using the remote, set DECK A/DECK B to DECK A to operate DECK A, or to DECK B to operate DECK B.
19 Basic Operations Creating Y our Own Program (Program Play) You can specify the playback order of the tracks and MP3 files on a disc to create your own programs containing up to 25 steps. When using the remote, set DECK A/DECK B to DECK A to operate DECK A, or to DECK B to operate DECK B.
20 Recording/Editing Before Recording About recordable discs •A recordable disc is an audio CD-R or Audio CD- RW with the following logo. • Audio CD-Rs are recordable only one time. Audio CD-RWs are recordable for multiple times. See page 7 for details.
Recording/Editing 21 Types of Recording The following types of recordings are possible, depending on the audio source. For details on each operation, see the reference pages. a × a × × ∗3 a Same as original Adjustable with REC LEVEL * 1 Set “Make Disc” in the Setup Menu to “On” beforehand (page 35).
22 Tips • To play the recorded CD on DECK A or another CD player, perform finalization (page 29). • To record your favorite tracks from the CDs in DECK A, make a program (page 19). • If the track marks are not marked properly while making an analog recording from an external component, see page 28.
Recording/Editing 23 Notes • You cannot pause recording in Synchro-Recording. • If Repeat Play is selected, it is automatically canceled. • If Shuffle Play is selected, it is automatically canceled.
24 Normal speed Synchro- Recording The disc is recorded at the same speed as the playing CD. You can hear the sound during recording. To use Make-Disc Synchro- Recording, set “Make Disc” in the Setup Menu to “On” beforehand (page 35). When using the remote, set DECK A/DECK B to DECK B.
Recording/Editing 25 X H x DECK A/DECK B INPUT REC z OPEN/CLOSE REC z INPUT X x H With the label side up 3 After “New Track” appears in the display, press H on DECK B to start recording. Synchro-Recording starts. DECK A and DECK B will automatically stop after recording.
26 Turn on the indicator OPT* ANALOG* 3 Press INPUT repeatedly to select the input connector. To record through DIGITAL OPTICAL IN ANALOG IN * If a disc is playing on DECK A, stop playback. To record the disc in DECK A, turn off “OPT” and “ANALOG.
Recording/Editing 27 Display DECK A Lvl Optical Lvl YES MENU/NO DECK A/DECK B . / > OVER indication MENU/NO REC LEVEL AMS OVER TOC CD TEXT CD - RW DIGITAL DECK A REC DISC ALBUM TRACK DECK B DISC TRACK Adjusting the Recording Level Adjusting the recording level for digital recording You can adjust the recording level using the Setup Menu.
28 REC z REC z DECK A/DECK B Marking T rack Numbers While Recording You can mark track numbers either manually or automatically. By marking track numbers at specific points, you can quickly locate the points later using the AMS Function or Editing Functions.
Recording/Editing 29 FINALIZE H H DECK A/DECK B FINALIZE DECK A/DECK B REC F ADER Fading In and Out recording (Rec Fader) Z You can gradually increase the recording level at the beginning of a recording (fade-in recording) or decrease the recording level at the end of a recording (fade-out recording).
30 H DECK A/DECK B FINALIZE H FINALIZE 3 Press H (or YES). Finalizing starts. During finalizing, “Finalize” appears in the display and the remaining time for finalizing (may not be accurate) appears.
Recording/Editing 31 ERASE YES AMS H H . / > DECK A/DECK B ERASE YES Erasing T racks of a CD- RW You can erase tracks recorded on a CD-RW. This process starts with the last track on the disc. Before erasing the track, make sure that the disc is not finalized.
32 MENU/NO . / > x m / M CLEAR YES DECK A/DECK B NAME EDIT/ SELECT TOC CD TEXT CD - RW DECK A REC DISC ALBUM TRACK DECK B DISC TRACK Display Selected AB Selected ab Selected 12 TOC CD TEXT CD - RW .
Recording/Editing 33 TIME DECK A/DECK B SBM MENU/NO YES . / > Changing an existing title 1 Do steps 1 to 5 in “Labeling Tracks/ Discs” (page 32) to select the title you want to change. 2 Press and hold CLEAR until the current title is erased. 3 Do steps 6 to 8 of “Labeling Tracks/ Discs” (page 32) to enter the new title.
34 Using the Silent Pause function If there has been no sound input for about 30 seconds during recording, the unit pauses recording. If the unit continues pausing for about 3 minutes after the Silent Pause Function activated, recording stops automatically.
Additional Information 35 Additional Information Using the Setup Menu You can make various settings on this unit by using the Setup Menu. When using the remote, set DECK A/DECK B to DECK B. 1 Press MENU/NO. 2 Turn AMS (or press . / > on the remote) to select the setup item, and press AMS (or YES).
36 Message Blank Disc Check Disc Complete! Data Disc Disc Full! Erase Ex-Change (RCD-W500C only) Fade In Fade Out Finalize Incomplete! Initialize Name Full! -NO DISC- No Name Messages The following table explains the messages that appear in the display.
Additional Information 37 Message C12/ Cannot Copy C13/ Rec Error C14/ TOC Error C41/ Cannot Copy Explanation You are trying to record a disc that cannot be played back in DECK-A or with an external device, such as CD-ROM or VIDEO CD. • Remove the disc, and then insert a music CD for playback.
38 Tr oubleshooting If you experience any of the following difficulties while using the unit, use this troubleshooting guide to help you remedy the problem. DECK A (the CD player section) The player does not start playing. • Insert a disc. • Place the disc properly.
Additional Information 39 Other No sound is output. • Make the connections properly (page 6). • Operate the amplifier properly. • When using the headphones, turn PHONE LEVEL to turn up the output level. The remote does not operate the unit. • Make sure that there are no obstacles between the unit and the remote.
40 Sony Corporation Printed in Malaysia Specifications DECK A (the CD player section) System Compact disc digital audio system Laser Semiconductor laser ( λ = 780 nm) Emission duration: continuous Playable discs CD, CD-R, CD-RW Frequency response 20 Hz – 20,000 Hz (±0.
Un punto importante, dopo l’acquisto del dispositivo (o anche prima di acquisto) è quello di leggere il manuale. Dobbiamo farlo per diversi motivi semplici:
Se non hai ancora comprato il Sony RCD-W500C è un buon momento per familiarizzare con i dati di base del prodotto. Prime consultare le pagine iniziali del manuale d’uso, che si trova al di sopra. Dovresti trovare lì i dati tecnici più importanti del Sony RCD-W500C - in questo modo è possibile verificare se l’apparecchio soddisfa le tue esigenze. Esplorando le pagine segenti del manuali d’uso Sony RCD-W500C imparerai tutte le caratteristiche del prodotto e le informazioni sul suo funzionamento. Le informazioni sul Sony RCD-W500C ti aiuteranno sicuramente a prendere una decisione relativa all’acquisto.
In una situazione in cui hai già il Sony RCD-W500C, ma non hai ancora letto il manuale d’uso, dovresti farlo per le ragioni sopra descritte. Saprai quindi se hai correttamente usato le funzioni disponibili, e se hai commesso errori che possono ridurre la durata di vita del Sony RCD-W500C.
Tuttavia, uno dei ruoli più importanti per l’utente svolti dal manuale d’uso è quello di aiutare a risolvere i problemi con il Sony RCD-W500C. Quasi sempre, ci troverai Troubleshooting, cioè i guasti più frequenti e malfunzionamenti del dispositivo Sony RCD-W500C insieme con le istruzioni su come risolverli. Anche se non si riesci a risolvere il problema, il manuale d’uso ti mostrerà il percorso di ulteriori procedimenti – il contatto con il centro servizio clienti o il servizio più vicino.
