Manuale d’uso / di manutenzione del prodotto PFV-SP3300 del fabbricante Sony
Vai alla pagina of 16
SIGNAL PROCESSING UNIT PFV-SP3300 BACKUP POWER SUPPLY UNIT HK-PSU03 INST ALLA TION MANUAL 1st Edition Serial No. 10001 and Higher (PFV -SP3300) Serial No.
PFV -SP3300 ! W ARNING This manual is intended f or qualified ser vice personnel only . T o reduce the risk of electr ic shoc k, fire or injur y , do not perform any ser vicing other than that contained in the operating instructions unless you are qualified to do so.
1(E) PFV -SP3300 Table of Contents Manual Structure Purpose of this manual ........................................................................................ 2 (E) Related manuals .................................................................
2 (E) PFV -SP3300 Manual Structure Purpose of this manual This manual is the installation manual of Signal Processing Unit PFV-SP3300 and its Backup Power Supply Unit HK-PSU03. This manual is intended for use by trained system and service engineers, and describes the information for installation of the unit.
1-1 (E) PFV -SP3300 Section 1 Installation 1-1. Operating Environment Operating temperature + 5 d C to + 40 d C Performance temperature + 10 d C to + 35 d C Humidity 10 to 90 % (No condensation) Mass: PFV-SP3300 Approx. 10 kg (Without the optional unit and board) HK-PSU03 Approx.
PFV -SP3300 1-2 (E) 1-3. Installation Space m . Do not block the ventilation holes of the unit. . Both of the front and rear sides must be at least 20 cm away from the walls for ventilation and mainte- nance. The outer dimensions of PFV-SP3300 are as shown here: 1-3.
1-3 (E) PFV -SP3300 1-4. Installing/Removing Optional Power Supply Unit w Before installing the backup power supply unit HK-PSU03 in PFV-SP3300, set the power switch of HK-PSU03 to the “O” position (OFF). Otherwise, deterioration of a connector which connects HK-PSU03 to PFV-SP3300 may cause a fire.
PFV -SP3300 1-4 (E) 4. Insert the main board fully into the slot along the board guides and close the board lever in the direction indicated by arrow 1 . 5. Stick the slot label supplied with the PFV-SP3300 onto the board lever. n Attach the supplied slot label to the position shown in the figure.
1-5 (E) PFV -SP3300 Installing Connector Panel (Rear side) The connector panel must be installed to the slot which contains the main board. 1. Remove the two screws and remove the blank panel of the slot which contains the main board. n Keep the removed blank panel and two screws.
PFV -SP3300 1-6 (E) 1-6. Rack Mounting n Install a ventilating fan in the rack to prevent the increase in the temperature inside a rack when multiple units are put in one rack. 1-6-2. Rack Mounting Procedure Explains the procedure for rack mounting by Rack Mount Kit RMM-10.
1-7 (E) PFV -SP3300 n The maximum depth of an adaptor is 750 mm. The minimum depth of an adaptor is 595 mm. 3. Firmly lay the right and left adaptors in the rack with the specified six screws. (Following figure is case of left side.) 4. Fasten the length adjustment screws which are loosened in step 2.
PFV -SP3300 1-8 (E) 1-7. Matching Connector/Cable When external cables are connected to the connectors on the PFV-SP3300 rear panel, the hardware listed below (or the equivalent) must be used.
2-1 (E) PFV -SP3300 Section 2 Service Overview 2-1. Cleaning the Filter w Be sure to turn off the power switch and disconnect the power cord from the outlet before starting any work. c . The temperature inside the unit increases if dust adheres to the filter and the ventilation holes are blocked.
.
PFV -SP3300 The material contained in this manual consists of inf ormation that is the proper ty of Sony Corporation. Sony Corporation e xpressly prohibits the duplication of any portion of this manua.
Printed in Japan Son y Cor poration 2000. 8 22 Communication System Solutions Netw ork Company ©2000 HK-PSU03 (SY) PFV -SP3300 (SY) J, E 3-204-888-01.
Un punto importante, dopo l’acquisto del dispositivo (o anche prima di acquisto) è quello di leggere il manuale. Dobbiamo farlo per diversi motivi semplici:
Se non hai ancora comprato il Sony PFV-SP3300 è un buon momento per familiarizzare con i dati di base del prodotto. Prime consultare le pagine iniziali del manuale d’uso, che si trova al di sopra. Dovresti trovare lì i dati tecnici più importanti del Sony PFV-SP3300 - in questo modo è possibile verificare se l’apparecchio soddisfa le tue esigenze. Esplorando le pagine segenti del manuali d’uso Sony PFV-SP3300 imparerai tutte le caratteristiche del prodotto e le informazioni sul suo funzionamento. Le informazioni sul Sony PFV-SP3300 ti aiuteranno sicuramente a prendere una decisione relativa all’acquisto.
In una situazione in cui hai già il Sony PFV-SP3300, ma non hai ancora letto il manuale d’uso, dovresti farlo per le ragioni sopra descritte. Saprai quindi se hai correttamente usato le funzioni disponibili, e se hai commesso errori che possono ridurre la durata di vita del Sony PFV-SP3300.
Tuttavia, uno dei ruoli più importanti per l’utente svolti dal manuale d’uso è quello di aiutare a risolvere i problemi con il Sony PFV-SP3300. Quasi sempre, ci troverai Troubleshooting, cioè i guasti più frequenti e malfunzionamenti del dispositivo Sony PFV-SP3300 insieme con le istruzioni su come risolverli. Anche se non si riesci a risolvere il problema, il manuale d’uso ti mostrerà il percorso di ulteriori procedimenti – il contatto con il centro servizio clienti o il servizio più vicino.
