Manuale d’uso / di manutenzione del prodotto PCV-R532DS del fabbricante Sony
Vai alla pagina of 114
.
Notice to Users © 1999 Sony Electronics Inc. All rights reserved. This manual and the software described h erein, in whole or in part, may not be reproduce d, tra nsla ted, o r reduced to a ny machine-readable form without p rior written approval. SONY ELECTRONICS INC.
Regulatory Inf ormation This equipment has been tested and found to comply with the lim its for a Class B digital device, purs uant to Pa rt 15 of th e Rules. These limits are designed to provide r easonable pr ot ection against harmful interfe rence in a residential installation.
FCC Part 68 This e quipm ent complie s wit h Part 68 o f th e FCC rul es. The r ing er eq uiv alen c e numbe r (REN) and the FCC registration number are printed on th e mo dem bo ard. If reques ted, this info rmation mu st be supp lied to th e teleph one co mp any .
v Contents Notice to Users ................. ........... ................. ................. ................. ..... ii Safety Information ..... ............ ................ ................. ................. ........... ii Regulatory Information...
V AIO Digital Studio R eference Manual vi Chapter 3 — Removing, Installing, and Replacing Components Removing the Cover ........ ..... ...... ........... ...... ..... ...... ........... ...... ...... ..... ..... 22 Removing the Front Panel .........
vii Chapter 5 — Fax/Modem Ca rd Chapter 6 — i.LINK ® Card Chapter 7 — CMOS Setup Options Main Screen ...... ............ ................. ................ ................. ................. .......... 77 Advanced Screen .................... .
viii.
1 Chapter 1 Identifying Components The following sections identify and describe ea ch component that is visible fr om the exterior of the V AIO Digital Studio™ Computer . Internal components ar e identified in the appr opriate section of this manual.
V AIO Dig ital Studio Re ference Manual 2 Front View Front panel OM04694X.VSD.
Identifying Components 3 Drives Drive Description Diskette drive 3.5-inch , 1.44 Mbyte. DVD-ROM drive DVD-RO M read : 8X (maximum performance). * CD-ROM rea d: 40X (maximum p e rform ance). * Data o n a DVD- ROM is read at a var iab le tr ansf er ra te, ran ging from 3 .
V AIO Dig ital Studio Re ference Manual 4 Buttons and Switches Button or switch Description Power/ Standby swit ch T urns system power on, off, or into sta ndby mode. Diske tte eje ct but ton Ejects a disk ette. Optical disc eject b utton Automatically opens and closes the optic al drive tray .
Identifying Components 5 Indi cat ors Indicator Descriptio n Power/Sta ndby indicator S tandby (a mber) indica tes the computer is in stan dby mode. On (gr een) indi cates the computer is out of stand by mode, r ead y to use. Off (n o color) indicates th e computer is turned of f.
V AIO Dig ital Studio Re ference Manual 6 Connectors Connector Descriptio n i.LINK ® (IEE E-1394) * * To connect to a 6-pin i.LINK device, use t he i.LINK connector on the back of the system. A 6-pi n i.LINK connector can supply power from the computer to the device if the device also has a 6-pin i.
Identifying Components 7 Rear Vi ew MOUSE KEYBOARD USB SERIAL PRINTER Power GAME/MIDI HEADPHONES TELEPHONE MONITOR KY0001.VSD LINE IN MIC LINE i.LINK (IEEE-1394).
V AIO Dig ital Studio Re ference Manual 8 Icon s Icon Description MOUSE connector KEYBOARD connector USB (Unive rs al Ser i al Bus) con necto r SER I AL co nn ecto r PRINTER con nector GA ME/M IDI c o.
Identifying Components 9 TELEPHONE (for phon e) i.LINK (IEE E-1394) Icon Description.
V AIO Dig ital Studio Re ference Manual 10 I/O Connect ors The following section identifies the various I/O connectors. KEYBOARD and MOUSE The KEYBOARD and MOUSE co nnectors are ph ysically identical and have the same pinout. They ar e standar d 6-pin PS/2 ® -t yp e f ema le connectors.
Identifying Components 11 PRINTER Co nnector The PRINTER connector is a standar d 25-pin DB-2 5 female connector . MONI TO R The MONIT OR connector is a standar d 15-pin female hi gh-density VGA- type connector . 13 1 25 14 KY0005.VSD 5 1 15 11 10 6 KY0004.
V AIO Dig ital Studio Re ference Manual 12 GAME Connector The GA ME conne ct or is a stand ard 15-pi n D B-15 f emale conne c tor . Th e GAME connector is also used to co nnect MIDI devices. MIC, LINE IN, and HEADPHONES The MIC, LINE IN, and HE AD PHONES jacks a re physically identical, but have dif feren t connections.
Identifying Components 13 TELEPH ONE and L INE The TELEPHONE and LINE jacks ar e physically identical and have identical connections. They are stand ard R J-1 1 female phone jacks. However , th e LINE jack is for connecting to a telephon e line that comes fro m the wall, and the TELEPHONE jack is for connecting the com puter to a telephone.
V AIO Dig ital Studio Re ference Manual 14 Expansio n Slots Ther e ar e four PCI slots, two of which a r e available for expansion (PCI #1 and PCI #2). The o ther two PCI slots are occupie d by the i.LINK card (PCI #3) and the fax/modem car d (PCI #4) .
15 Chapter 2 Configuring Y our System This chapter contains info rmation on configuring your system. Configuring yo ur system can co nsist of the f ol lowing: ❑ Making chan ges to the BIOS sett ing .
V AIO Dig ital Studio Re ference Manual 16 Accessing the BIOS Setup Utili ty Y ou must access the BIO S Setup Utility to ma ke cha nges to the BIOS settings (s ee “CMOS Setup Opt ions” on page 75 for inform ation on BIOS settings) . 1 Reboot the sys tem.
Configuring Your System 17 Changing the Display's Power Man agement Setting s A display that has power management capability is designed to opera te on red uced power or shut itself of f after the system ha s been idle for a specified period of time.
V AIO Dig ital Studio Re ference Manual 18 5 Select the power scheme that is most appr opriate for the way you use your computer . T o change a power sche me, change the settings for System standby , T urn of f monitor , and T urn o ff har d disks.
Configuring Your System 19 Config uring the Syst em Board The system boar d contains a CMOS Clear configuration jumper , and two sets of r eserved jumper blocks (do not cha nge). The CMOS and Non-V olatile RAM (NVRAM) settings ar e only clea red if the checksum test returns fa lse.
20.
21 Chapter 3 Removing, Installing, and Replacing Components This chapter describes r emoving, installing, and replacing major components for upgrading, r econfiguring, an d troubleshooting th e components.
V AIO Dig ital Studio Re ference Manual 22 Removing the Cover Y ou must remove the co ver to access the system boar d, add-in car ds, power supply , battery , memory , and internal drives. 1 From the rea r of the unit, pr ess the two tabs on the right side.
Removing, Installing, and Replacing Components 23 4 Lift the thre e-sided outer panel up and over the unit by pulling up on the lar ge tab that extends fr om the top rear .
V AIO Dig ital Studio Re ference Manual 24 Removing the F ront Panel Y ou must remove the front panel to install a 5 ¼” device. 1 Remove the cover (see “ Removing the Cover” o n page 22). 2 Push down and out on the two plastic tabs fr om inside the botto m of the chassis to r elease the bottom end of the fr ont panel.
Removing, Installing, and Replacing Components 25 Replacing the Front Panel 1 Insert the two plastic ta bs (lo cated on the bottom of the front panel) into the slots at the bottom o f the chassi s. 2 Push the bottom of th e fr ont panel in unt il the tabs snap into place.
V AIO Dig ital Studio Re ference Manual 26 Replacing the Cover 1 Align the thr ee-sided outer panel over the chassis and lower it onto the unit so that the tabs slip in to the lips on the unit . 2 Insert the thr ee screw s (rem oved earlier) to secure the panel.
Removing, Installing, and Replacing Components 27 5 Gently press the frame in un til i t clicks into posi tion. KY0068.VSD.
V AIO Dig ital Studio Re ference Manual 28 Instal ling a n Add -In C ard 1 Remove the cover (see “ Removing the Cover” o n page 22). 2 Locate an available expansion slot connector . 3 Remove the slot cover adja cent to the selected slot connector (see “Removing a Slot Co ver” on page 39).
Removing, Installing, and Replacing Components 29 Remo ving an A dd-in Car d 1 Remove the cover ( see “Removing the Cover” o n pag e 22). 2 Disconnect any cables attached to the add-in car d you want to rem o v e . 3 Remove the scr ew that secur es the add-in car d to the chassis.
V AIO Dig ital Studio Re ference Manual 30 5 If you do not r eplace the car d or install another add- in car d, install a slot cover over the vacant slot at the rear of the chassis (see “Covering an Open I/ O Slot” on page 40). 6 Replace the cover (see “Replacing the Co ver” on page 26).
Removing, Installing, and Replacing Components 31 Replacing the Lithium Battery Y ou may need to replace the lithium battery if your computer cons istently loses the date or tim e settings a fter turning it o f f. The li thiu m battery has a typical life of thr ee years, after which the battery may be too weak to power the CMOS memory .
V AIO Dig ital Studio Re ference Manual 32 8 If necessary , remove any add-in ca rds (see “Remo ving an Add-in Car d” on page 29) to gain access to the battery . Y ou may also need to disconnect some cables. 9 Insert a small flathead scr ewdriver into the small space a t the top of the battery holder .
Removing, Installing, and Replacing Components 33 16 If the err or message “Err or : Check date and time settings.” appears during the r eboot sequence, pr ess F2 during the r eboot pr ocess to access the BIOS Setup Utility .
V AIO Dig ital Studio Re ference Manual 34 Instal ling S yste m Mem ory 1 If necessary , remove the memory module you wish to r eplace (see “Remov ing a Memo ry Module ” on page 37). 2 Remove the new memory module(s) fr om its anti-static package.
Removing, Installing, and Replacing Components 35 7 Align the module o ver the appropriate socket, not ing the location of pin 1 on the module an d pin 1 on the socket. 8 Care fully but firm ly insert the edge of the module into the socket. 9 Press down firmly and evenly at both co rners until the module is fully seated.
V AIO Dig ital Studio Re ference Manual 36 12 Reconnect the power co rd an d turn on the c omputer . Y our computer au tom atically recognizes the extra mem ory and will configure itself accordingly when you turn on the computer . No further action is required.
Removing, Installing, and Replacing Components 37 Removing a Memory Module Y ou may need to r emove a memory module if you change the m emory configuration o r replace a bad module. 13 Remove the cover ( see “Removing the Cover” on page 22). 14 Locate the memory module you wish to r emove.
V AIO Dig ital Studio Re ference Manual 38 15 Reach ar ound each side of the power supply and push down the handle on each side of the memory mo dule to eject the module fr om its so cke t. 16 Grasp one ed ge of the memory module a nd lift out. Sto r e the mo dule in a static-f ree bag.
Removing, Installing, and Replacing Components 39 Removing a Slot C over Y ou remove a slot cover when you in stall an ad d-in card that occupies a previously-empty slot . 1 Disconnect the power cor d fr om the com puter . 2 Remove the cover ( see “Removing the Cover” o n pag e 22).
V AIO Dig ital Studio Re ference Manual 40 Covering an Open I/O Slot Slot covers pr event air fr om escaping thr ough the em pty hole. If air escapes, the components inside th e computer cannot be pr operly cooled. This may dama ge so me component s, especially the main processor (which generates the most heat).
Removing, Installing, and Replacing Components 41 Installing a 3½” Internal Hard Disk Drive Y our system com es with a n a v ai lable bay to ho ld an additi on al 3½” hard disk drive. The drive you install m ust n ot requir e front panel access.
V AIO Dig ital Studio Re ference Manual 42 5 Slide the drive holder forwar d (B), and then out. 6 Place the drive holder on top of the power supply . 7 Slide the new drive into the drive h older and align the holes on each side of the d rive hold er .
Removing, Installing, and Replacing Components 43 10 Connect the second power connector to the new drive. 11 Make sur e the drive connector is connected securely to the motherboar d. 12 Lower the drive ho lder down and slide it back into th e chassis (A in next diagram).
V AIO Dig ital Studio Re ference Manual 44 16 Reconnect the power co rd an d then turn on your computer . Y our computer automatically reco gnizes the new drive and configur es itself accordingly wh en you turn it on . Format and part itio n the new drive following the instru ctions provided w ith the drive.
Removing, Installing, and Replacing Components 45 Installing a 5¼” Internal Hard Disk Drive Y our system com es with a n a v ai lable 5¼ ” ba y to hold an additio nal 3½” or 5¼” har d disk drive. The drive you install can a ccess the front pa nel.
V AIO Dig ital Studio Re ference Manual 46 6 Remove the drive bay cover (shin y an d silver) by pushing it from behind (use a long object or your finger). Stor e for futur e use. 7 Slide the drive into the drive bay until the h oles on each side of the drive align with the holes on each side of the chassis.
Removing, Installing, and Replacing Components 47 8 Secur e the drive with four scr ews (pro vided with new drive). Do not overtighten the scr ews. 9 Attach the drive connector a nd power cable to the drive. Make sure the drive connector is conn ected securely to the m otherboar d.
V AIO Dig ital Studio Re ference Manual 48 Removing the Po wer Supply Y ou remove the po wer supply when you insert a memory module (see “Ins tallin g Syst em Memory ” on page 34). 1 Remove the thr ee scr ews (A in next diagram ) from the rea r of the chassis.
Removing, Installing, and Replacing Components 49 3 Slide the power supply back (towar ds the 3½” drive ba y) about ½” (or until the power supply detaches fr om the chassis tabs), then lift up until the power supply clea rs the chassis l ip. KY0097.
V AIO Dig ital Studio Re ference Manual 50 4 Rotate the power supply horizontally by 180 degr ees counter clockwise and rest it on top o f the chassis where th e CD- ROM/DVD-ROM drive is loca ted.
Removing, Installing, and Replacing Components 51 Replacing the Power Su pply 1 Rotate the power supply horizontally by 180 d egrees clockwise and lower it into th e ch as sis until it is f lush aga ins t the square hole at the rear of the chassis.
52.
53 Chapter 4 System Board This chapter identifies each component on the system board and provides a detailed description of each connector , jumper , and switch on the system board.
V AIO Dig ital Studio Re ference Manual 54 Connectors Front Panel Header (J25) The fr ont panel header is a 20-pin header ( 1 pin is r emoved for the key) that pr ovides connections to various fr ont panel functions. A 20 -pin connector with o nly eight wires is used to interface the system board to the fr ont panel.
System Board 55 Diskette Drive Connector OM04701H.VSD 2 34 Key (pin 5) 1 33.
V AIO Dig ital Studio Re ference Manual 56 Memory Module (DIMM) Connectors Both sides of each Dua l Inline Memory Module (DIMM) look very similar . The side with pin 1 has a small "1" to the left of pin 1. Be sur e to orient a DIMM correctly in th e DIMM connector ( a small triangle on the connector indicates pin 1).
System Board 57 PCI Slot Connectors There ar e a total of four PCI slot connectors (slo t #1 to #4). T wo PCI slo t connectors (#1 an d #2) ar e ava ilable. The other two PCI slots ar e occ upied by the i.LINK ® ca rd an d the fax/modem car d. The PCI slots suppo rt 32- bit 5V and Universal (3.
V AIO Dig ital Studio Re ference Manual 58 IDE Connector s Ther e are tw o IDE (Integrated Drive Electr onics) con nectors on the system board: a Primary IDE and a Seconda r y IDE co nnector . Each IDE connector supports up to tw o IDE drives using a ribbon cable with two connectors.
System Board 59 KEYBOARD and MOUSE Connector s The KEYBOARD connector and the MOUSE connecto r are 6-pin female PS/2-type (mini- DIN ) connectors. They ha ve identical pinout s. KEYBO ARD and MO USE Pin Signal Name 1D A T A 2N C 3L O G I C G N D 4 +5V (fused) 5C L O C K 6N C KY0032.
V AIO Dig ital Studio Re ference Manual 60 USB Connectors Ther e are tw o USB ports that permit connection of two USB peripher al devices directly to the system without having to use an external hub. USB2 is a standar d USB conn ector accessible fr om the r ear panel.
System Board 61 SERIAL 1, PRINTER, and MONIT OR Connectors The SERIAL 1, PRINTER, and MONIT OR connectors ar e mounted in a single bracket on the system board . The SERIAL 1 conn ector is a DB-9 male connector . The PRINTER con nector is a DB-25 female connector .
V AIO Dig ital Studio Re ference Manual 62 SERIAL 1 connector Pin Signal Name 1D C D 2R X D 3 TXD 4D T R 5L O G I C G N D 6D S R 7R T S 8C T S 9R I PRIN TE R con ne ctor Pin Signal N ame 1 STROBE - 2 .
System Board 63 23 LOGIC GND 24 LOGIC GND 25 LOGIC GND MONITOR connector Pin Signal Name 1R E D 2G R E E N 3 BLUE 4G N D 5 DDC GND 6R E D G N D 7G R E E N G N D 8 BLUE GND 9N C 10 GND 11 G N D 12 SDA .
V AIO Dig ital Studio Re ference Manual 64 Fan Connectors The CPU-F AN, PWR-F AN, and CHA-F AN connectors ar e 1 x 3- pin straight header connectors. PWR-F AN connects to the pow er supply and controls the power supply coo ling fan. C PU -F A N a nd CHA-F AN connectors ar e not used.
System Board 65 GAME Connector The GAME conn ector is a female DB-15 connector for conn ecting to a game contr oller/joystick or MIDI device. GAME Connector Pin Signal Name 1 GAMEVCC 2J P Y B 0 3J O Y A 0 4G N D 5G N D 6J O Y A 1 7J O Y A 2 8 GAMEVCC 9 GAMEVCC 10 JOYB2 1 1 JOY A2 12 MIDI_ TxD 13 JOY A3 14 JOYB3 15 MIDI_ RxD KY0056.
V AIO Dig ital Studio Re ference Manual 66 HEADPHONES, LINE IN, MIC Connectors The HEADPHONES jack is a stereo min i-jack (3.5 mm) that connects to headphones. The LINE IN jack is a ster eo mini-jack ( 3.5 mm) that connects to a stereo audio sour ce (not an audio sour ce fr om a video device).
System Board 67 MIC CD-IN Connector The CD-IN connector on the system board is a 1 x 4-pin header connector that connects to the DVD-ROM drive’s audio output conn ector . CD-IN Pin Signal Name 1 Le ft Line In 2G r o u n d 3G r o u n d 4 R ight Line I n OM04713A.
V AIO Dig ital Studio Re ference Manual 68 Modem Connector The Modem connector on the system boar d is a 1 x 4-pin h eader that is not in use. Modem Pin Signal Name 1G r o u n d 2 Mod em Out 3G r o u n d 4P h o n e I n KY0062C.
System Board 69 AUX-IN Connect or The AUX-IN conn ector on the system boar d is a 1 x 4-pin header connector that is not in use. AUX - IN Pin Signal Name 1 Le ft Line In 2G r o u n d 3G r o u n d 4 R ight Line I n KY0062B.
V AIO Dig ital Studio Re ference Manual 70 Config urat ion Jumper Ther e is one user- configurable jumper for CMOS Clear . The other two jumpers ar e reserved (do not cha nge). The computer ships with CMOS Clear in th e Normal position. Do not change the positio n of this jump er un less directed by a technica l suppo rt person.
71 Chapter 5 Fax/Modem Card The fax/modem car d occupies PCI slot #4. Ther e are two RJ-1 1 jacks: one to connect a telepho ne line, and one to co nnect a phone. Connectors Name Connector T ype Description TELEPHONE RJ-1 1 Connects to phon e LINE RJ-1 1 Connects to telephone li ne KY0038.
72.
73 Chapter 6 i.LINK ® Card The i.LINK (IEEE-1394 ) card occupies PCI slot #3. There a re fo ur header connectors, but only two ar e used: CN3 conne cts to the power supply , and CN4 connects to the 4-pin i.LINK connector on the fr ont chassis thr ough an interface boar d on the fr ont chassis.
74.
75 Chapter 7 CMOS Setup Options This chapter describes each screen in the PhoenixBIOS Setup Utilit y (see “Accessing the BIOS Setup Utilit y” on page 16). The A ward BIOS setup has five menu items on the menu bar . These are: ❑ Main ❑ Advanced ❑ Power ❑ Boot ❑ Exit Options that you can change are enclosed in brackets.
V AIO C omputer Referenc e Manual 76 Press F10 to save the changes and exit, or press Esc to discard the changes. Follow the on-scr een prompts for other choices. Th e bottom of the screen presents a summary of the keys to use for navigation and contr ol.
CMOS Setup Options 77 Main Screen Sys tem Ti me [00: 00:00] Syste m Date [01/01 /199 9] Legacy Diskette A [1.44M, 3. 5 in.] 2.88M , 3.5 in. None 360K , 5. 25 i n. 1.2M, 5.25 in . 720K , 3.5 in . Legacy Diskette B [None] 360K , 5. 25 i n. 1.2M, 5.25 in .
V AIO C omputer Referenc e Manual 78 IDE Sub-Menus Type [Auto] User Type HDD CD-ROM LS-120 ZIP-100 MO Other ATAPI None Tran slation Me thod * [LBA] Large Normal Match Pa rt it ion Table Manual Cylinde.
CMOS Setup Options 79 Advanced Screen CPU Core:Bus F req. Multiplier [2.0x] 2.5x 3.0x 3.5x 4.0x 4.5x 5.0x 5.5x 6.0x 6.5x 7.0x 7.5x 8.0x CPU Level 1 Cache [Enabled ] Disabled CPU Level 2 Cache [Enabled.
V AIO C omputer Referenc e Manual 80 Chip Configuration Sub-Menu SDRAM Configuration [By SPD] User Defi ne 7ns (1 43 MHz) 8ns (1 25 MHz) SDRAM CAS Latency [2T] SDRAM RAS t o CAS Delay [2T] SDRAM RAS P.
CMOS Setup Options 81 I/O Device Configura tion Sub-Menu Onbo ard AC97 Audio Co ntroller [Auto] Disabled Onb o ar d FD C Sw ap A & B [No Sw ap ] Swap AB Floppy Disk Access Control [R/W] Read Only .
V AIO C omputer Referenc e Manual 82 PCI Configurat ion Sub-Men u Slot 1 IRQ [Auto] to NA Slot 4 IRQ 3 4 5 7 9 10 11 12 14 15 PCI/VGA Palette Sn oop [Disabled] Enabled PCI Latency Ti mer [ 32 ] SYMBIO.
CMOS Setup Options 83 PCI/P NP ISA I RQ Reso urce Ex clusion Sub-Menu IRQ 3 Used By ISA [No/ICU] Yes IRQ 4 Used By ISA [No/ICU] Yes IRQ 5 Used By ISA [Yes] No/ICU IRQ 7 Used By ISA [No/ICU] Yes IRQ 9 .
84 Shadow Con figuration Sub-Menu Video ROM BIO S Shadow [Enabled] Disabled D0000- D7FFF S hadow [Disab led] Enabled D8000- DBFFF S hadow [Disab led] Enabled DC000- DFF FF Shad ow [Di sable d] Enabled.
CMOS Setup Options 85 Power Screen Power Man agement [User Define] Disabled Min Savi ng Max Sa vi ng Video Off Opti on [Suspend -> Off] Always On Video Method [DPMS OFF] DPMS Reduce ON Blank S cree.
V AIO C omputer Referenc e Manual 86 Power Up Cont rol Sub -Menu AC PWR Loss Restart [Disabled] Enabled PWR Up On Mod em Act [Disabled] Enabled Wake On LA N [Di sabl ed ] Enabled Hardware Monitor S ub.
CMOS Setup Options 87 Boot S creen 1. ATAP I CD-ROM [(displays installed driv e)] Disabled 2. Removable Device [Legacy Floppy] LS120 ZIP-100 ATAPI MO Disabled 3.
V AIO C omputer Referenc e Manual 88 Exit Scree n Exit Saving Changes Exit Disc arding Ch anges Load Setup Defaults Disc ard Ch ang es Save Cha ng es.
89 Chapter 8 Miscellaneous T echnical Information This chapter conta ins information on the following subjects: ❑ User and Supervisor passwor d ❑ Beep code err or messages ❑ PCI configuration st.
V AIO C omputer Referenc e Manual 90 About User and Supervis or Pas swor ds The system allows you to specify up to two passwords (a User passwor d and a Supervisor passwor d) in the CMOS Setup Utility . The User password is r equired; the Supervisor password is optional.
Miscellaneous Technical Informa tion 91 Beep Code Error Messages During a no rma l bootup, a sing le short beep signif ies that the sys tem is OK. Other beep pattern s signify err ors. The number o f beeps indicates the specific erro r that occurr ed.
V AIO C omputer Referenc e Manual 92 PCI Config uration Stat us an d Error Messag es The followin g is a list of stat us and error messages that m ay appear on your system from time to time. Mess age M ean ing Floppy Disk Con tro ller Resourc e Conflict The disket te contr oller has r eque sted a re sour ce that is alr eady in use.
Miscellaneous Technical Informa tion 93 Syst em Bo a rd De vic e Re so urce Conflict A non-Plug and-Pl a y ISA card has req u e s t e d a res o u rce t h a t is a l re a d y i n us e .
V AIO C omputer Referenc e Manual 94 DMA Channel A ssignments This shows the factory default values. The Micr osoft ® Wi n d o w s ® 98 Second Edition opera ting system reassigns r esources to best m eet the needs of a pa rticular configuration.
Miscellaneous Technical Informa tion 95 System I/O Address Map Address Range (hex) Description 0000 - 00 0F Direct memory acce s s controller 0010 - 00 1F Motherb oard resources 0020 - 00 21 Programma.
V AIO C omputer Referenc e Manual 96 0376 - 0 376 Intel 82 801AA bus ma s ter I DE con trol l er 0376 - 0 376 Second ary IDE con troller 0378 - 0 37F ECP printe r por t ( LPT1) 0388 - 0 388 V ortex AU88 10 S ound Blas ter Pro emulat ion 03B0 - 03BB Int el ® 810 chipset graphics dr iver PV2.
Miscellaneous Technical Informa tion 97 Memory Map Address range Default configuration 0000 000 0 - 00 09FFFF Sy stem bo ard exte nsio n f or AC PI BIOS 000A0 00 0 - 000 AFFFF Inte l ® 810 ch ipset g raphi cs driv er PV2 .2 000B00 00 - 000B FFFF In tel ® 810 chip set g raphic s drive r PV2.
V AIO C omputer Referenc e Manual 98 IRQ Sett ings IRQ Settings 00 System tim er 01 Standar d 101/102-Key or Microsoft Natural Keyboa rd 02 Programma ble i nterrupt controller 03 Sony OHCI i.
99 Chapter 9 Specifications This chapter describes the techn ical specifications for the Sony PCV -R532D S computer . Processor Chipset PCI Bus Memory Modules (DIMMs) 466 MHz * Intel Celer on pr ocessor (with 6 6 MHz FSB) * MHz denotes microproces sor internal clock speed.
V AIO Dig ital Studio Re ference Manual 100 DIMM Configurat ions L2 Cach e Graphics DIMM1 * * The PCV-R532DS is shipped with 64 MB. SDRAM is expandable to 256 MB. Computer SDRAM is unbuffered DIMM, speci fication Rev. 1.0 or later. Supports SDRAM memory.
Specificat ions 101 Audio Communications I/O and Expansion Slots Sound chip Aur eal 8810 plu s AC97 codec W ave synt hesis Aur eal wavetab le synthes is Sound ef fects A3D ster eo Audio sampling rate .
V AIO Dig ital Studio Re ference Manual 102 Drives and Controllers System BI OS Dis ket te c o n tr oll e r 765A - com p a ti ble (sup p or ts up to 2.
103 Index A add-in c ard install ing 28 remov ing 29 address map, syst em 95 audio sp ecifications 10 1 AU X- I N con ne c t or 69 B batter y - See lit hium batt ery beep codes 91 BIOS Set up Utility .
V AIO Digital S tudio Referenc e Manual 104 display, power manag ement 17 DMA cha nnel assig nme nts 94 drive CD-RW specificat ions 102 IDE connectors 58 install ing an a dditional 3½" d rive 41.
105 L L2 cach e specifications 100 LINE co nnector 13 LINE IN connect or 12 , 66 lithium bat tery, repla c ing 31 M map - See Also I/O address map and memory map memory - See Also system memory memory.
V AIO Digital S tudio Referenc e Manual 106 con fig urin g 19 diskette drive c onnector 55 fan con nectors 64 front pa nel header 54 GAME connector 65 HEADPHONE S connec t or 66 IDE connectors 58 KEYB.
Un punto importante, dopo l’acquisto del dispositivo (o anche prima di acquisto) è quello di leggere il manuale. Dobbiamo farlo per diversi motivi semplici:
Se non hai ancora comprato il Sony PCV-R532DS è un buon momento per familiarizzare con i dati di base del prodotto. Prime consultare le pagine iniziali del manuale d’uso, che si trova al di sopra. Dovresti trovare lì i dati tecnici più importanti del Sony PCV-R532DS - in questo modo è possibile verificare se l’apparecchio soddisfa le tue esigenze. Esplorando le pagine segenti del manuali d’uso Sony PCV-R532DS imparerai tutte le caratteristiche del prodotto e le informazioni sul suo funzionamento. Le informazioni sul Sony PCV-R532DS ti aiuteranno sicuramente a prendere una decisione relativa all’acquisto.
In una situazione in cui hai già il Sony PCV-R532DS, ma non hai ancora letto il manuale d’uso, dovresti farlo per le ragioni sopra descritte. Saprai quindi se hai correttamente usato le funzioni disponibili, e se hai commesso errori che possono ridurre la durata di vita del Sony PCV-R532DS.
Tuttavia, uno dei ruoli più importanti per l’utente svolti dal manuale d’uso è quello di aiutare a risolvere i problemi con il Sony PCV-R532DS. Quasi sempre, ci troverai Troubleshooting, cioè i guasti più frequenti e malfunzionamenti del dispositivo Sony PCV-R532DS insieme con le istruzioni su come risolverli. Anche se non si riesci a risolvere il problema, il manuale d’uso ti mostrerà il percorso di ulteriori procedimenti – il contatto con il centro servizio clienti o il servizio più vicino.
