Manuale d’uso / di manutenzione del prodotto MX-C400P del fabbricante Sony
Vai alla pagina of 257
Operation Guide MX-C400P MODEL: BEFORE USING THE MA CHINE BEFORE USING THE MA CHINE SYSTEM SETTINGS SYSTEM SETTINGS PRINTING PRINTING TR OUBLESHOO TING TR OUBLESHOO TING.
i MANUALS PROVIDED WITH THE MACHINE Operation manuals in PD F format (this manual) The manuals in PDF form at provide detailed explanatio ns of the procedures for usin g the machine in each mode. To view the PDF manuals, down load them from the hard drive in the machine.
ii ABOUT OPERATION MANUAL This manual explains how to use the MX-C40 0P digital full color printer. Please note • For information on instal ling the drivers and software cited in th is manual, please refer to the Software Setup Guide.
1-1 This chapter provides informat ion on basic operation procedures, ho w to load paper and machine maintenance. BEFORE USING THE MACHINE PART NAMES AND FUN CTIONS . . . . . . . . . . . . . . 1-3 • EXTERIOR . . . . . . . . . . . . . . . . . . . . .
1-2 BEFORE USING THE MACHINE MAINTENANCE REPLACING THE TONER CAR TRIDGES. . . . . . . 1-49 REPLACING THE TONER COLLECTION CONTAINER . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-52 REPLACING THE DEVELOPER CARTRIDGE / DRUM CARTRID GE . .
1-3 BEFORE USING THE MACHINE This section provides b asic information about t he machine. Please rea d this chapter before using the machine. PART NAMES AND FUNCTIONS EXTERIOR (1) Front cover Open this cover to replace a toner cartridge. ☞ REPLACING THE TONER CARTRIDGES (page 1-49) (2) Output tray (center tray) Output is delivered to this tray.
1-4 BEFORE USING THE MACHINE (8) Tray 1 This holds paper. ☞ TRAY SETTINGS FOR TRAYS 1 TO 4 (page 1-40) (9) Tray 2/Tray 3/Tray 4 (when 500-sheet paper feed units are installed)* These hold paper. For 500-sheet paper feed unit comb inations, consult your dealer or nearest SHARP Se rvice Department.
1-5 BEFORE USING THE MACHINE INTERIOR (11) Developer cartridges This contains the developer that is necessary to transfer the toner to the paper. When replacing the drum cart ridge, the developer cartridge must be removed before the drum cartridge is replaced.
1-6 BEFORE USING THE MACHINE SIDE AND BACK (1) USB connec tor (A type) Supports USB 2.0 (Hi -Speed). This is used to connect a USB device such as USB memory to the machine. This connector is not initiall y available for use. If yo u wish to use the conne ctor, contact your service assistan ce.
1-7 BEFORE USING THE MACHINE OPERATION PANEL (1) Display Messages and keys appear in the display. Use the arrow keys and the [OK] key to select displayed items and perform various operations. ☞ USING THE OPERATION PANEL (page 1-8) (2) [OK] key Press this key to ente r a selected setting.
1-8 BEFORE USING THE MACHINE USING THE OPERATION PANEL This section explains how to use the o peration panel. • To enter text, see " ENTERING TEXT " (page 1-75). • For information on the screens and procedures for using the system set tings, see " Common Operation Met hods " (page 3-5) in "3.
1-9 BEFORE USING THE MACHINE Selecting items in lists and returning to the previous screen (1) When selections appear as a list in a setting screen, select the desired item in the list with the keys. Items that are currently set are indicated by . (2) Press the [OK] key to enter your selec tion.
1-10 BEFORE USING THE MACHINE Entering with the arrow keys To change the nu mber of copies, enter a nu mber as follows. Example: 123 (1) Select the number with the keys. (2) Use the keys to move the frame to the next place. (3) Repeat steps (1) and (2) to enter 2 and 3.
1-11 BEFORE USING THE MACHINE Items that appear in the display (1) Icon di splay (2) This sh ows messages. (3) Settings appear here. If you move the selection frame to the bottom setting and then press the key, the next screen appears. (4) This sh ows the curren t page / total pages.
1-12 BEFORE USING THE MACHINE USING THE WEB PAGE The procedures for using the Web page are explained below. (1) Common buttons The [Submit] button used to st ore settings, the [Update] button used to update se ttings, and the [Can cel] button used to cancel a setting and return to the previous screen appear here.
1-13 BEFORE USING THE MACHINE TURNING THE POWER ON AND OFF The machine has two power switches. One is the main po wer switch on the left side of the machine, and the ot her is the [POWER] key ( ) on the right side o f the operation pan el.
1-14 BEFORE USING THE MACHINE ENERGY SAVE FUNCTIONS This product has the following two en ergy save functions that conform to the Energy Star guidelines t o help conserve natural reso urces and reduce environme ntal pollution.
1-15 BEFORE USING THE MACHINE USER AUTHENTICATION User authentication re stricts the use of the machine to users that have been registered. The functions th at each user is allowed to use can be specified, allowing the machine to be customized to meet the needs of your w orkplace.
1-16 BEFORE USING THE MACHINE If an incorrect use r number is entered 3 times in a row... If "A Warning when Login Fails" is enab led in the Web page, the ma chine will lock for 5 minutes if an incorrect user number is ente red 3 times in a row.
1-17 BEFORE USING THE MACHINE AUTHENTICATION BY LOGIN NAME / PASSWORD The following procedure is used to log in using a login na me and password received fro m the administrator of the machine or the adminis trator of th e LDAP serve r.
1-18 BEFORE USING THE MACHINE 3 Select the [Password] key. A text entry screen for enteri ng the password will appear. Enter your password that is stored in "User List" in the Web page. If you are logging i n to an LDAP server, enter the passwo rd that is stored with your LDAP server login name.
1-19 BEFORE USING THE MACHINE If an incorrect login name or password is ente red 3 times in a row... If "A Warning when Login Fails" is enab led in the Web page, the ma chine will lock for 5 minutes if an incorrect login name or password is entered 3 ti mes in a row.
1-20 BEFORE USING THE MACHINE ACCESSING THE WEB PAGE The login method f or accessing the Web server in the machine var ies depending on whether or not user authenticatio n is enabled. For information on accessing the Web server in the ma chine, see "ACCESSING THE WEB SERVER IN THE MACHINE" in the Quick Start Guide.
1-21 BEFORE USING THE MACHINE USER CONTROL User Control is used to configure sett ings for user authentica ti on in the Web page. Select the [User Control] key in the Web page m enu to config ure the settin gs. USER LIST This is used to store, edit, and de lete users when user authenti cation is enabled.
1-22 BEFORE USING THE MACHINE Factory-stored users The following users are sto red in the machine at the factory. • Administrat or: Factory-stored account fo r the administrator of the ma chine. • User: This is used when network authe ntication is used a nd a login name not st ored in the machine is directly entered.
1-23 BEFORE USING THE MACHINE *1 Does not appear when "User Number" is selected for the authentication method. *2 Only appears when "User Numb er" is se lected for the authenticatio n method. *3 Not required when network authentication is used, as the password stored in the LDAP server is used.
1-24 BEFORE USING THE MACHINE DEFAULT SETTING These settings enable or disable user authentic ation and specif y the authentication method. When user authen tication is enabled, each user of the machi ne is regist ered. When a user logs in, settings for that user are applied.
1-25 BEFORE USING THE MACHINE The Number of User Name Displayed Setting on Operation Panel The number of user s that are displayed in the user selection screen can be sele cted (6, 12, or 18 users). A Warning when Login Fails This setting is used to display a warning and prohibit login for five minutes if login fails three tim es in a row.
1-26 BEFORE USING THE MACHINE PAGE LIMIT GROUP LIST This is used to store grou ps of Account Limit Set tings. Th e page limits for each user are specified by selecting one of these stor ed groups when the user is stor ed. When the [Page Limit Group List] key is selected, the following screen appears.
1-27 BEFORE USING THE MACHINE AUTHORITY GROUP LIST Use this to st ore groups of user auth ority setting s. The aut hority of each user is specified by selecting one of these stored groups when t he user is stored. When the [Authorit y Group List] key is selected, the following scr een appears.
1-28 BEFORE USING THE MACHINE List of settings and factory defa ult settings of template groups *1 For information on ea ch setting, see the system settings (general/administrator) lists. *2 All allowed except "Change Administrator Password" .
1-29 BEFORE USING THE MACHINE FAVORITE OPERATION GROUP LIST This is used to store favorite operat ion groups. Favorite Operation Group Registration Groups of preferr ed settings can be stored as "favor ite operation groups".
1-30 BEFORE USING THE MACHINE VIEW USER COUNT This displays the tot al number of pages prin ted by each user. When the [View User Count] key is selected, the f ollowing screen appears. (1) User List This shows the factory-stored users and the currently stored users.
1-31 BEFORE USING THE MACHINE REMOTE OPERATION OF THE MACHINE The remote oper ation function allows you to opera te the machine from your computer . When this funct ion is added, th e same screen as the operat ion panel scree n appears on your computer.
1-32 BEFORE USING THE MACHINE JOB LOG The machine ret ains a log of the jobs that are perform ed. Settings for the job log stored in t he machine are configured on the Web page. Select [Job Log] on the Web page to configur e the settings. SAVE / DELETE JOB LOG The log of jobs executed on the machine can be stored or deleted.
1-33 BEFORE USING THE MACHINE ITEMS RECORDED IN THE JOB LOG The machine recor ds the jobs that are performed in the job log . The main information that is recorded in the job log is described below.
1-34 BEFORE USING THE MACHINE *In some environments this is not recorded. 16 Main items Number of Reserved Sets Number of specified sets. 17 Number of Completed Sets Number of completed sets. 18 Number of Reserved Pages Number of reserved print jobs. 19 Number of Completed Pages Number of completed pages of a set.
1-35 BEFORE USING THE MACHINE STORAGE BACKUP User information stored in the machine can be backed up to your comput er or restored from your compu ter via the Web page. Settings and infor mation stored in the machine can be backed u p to your computer.
1-36 BEFORE USING THE MACHINE DEVICE CLONING Device cloning is used to save the machin e's setting information in XML format and copy the information to another machine. This function save s you the trouble of repeatedly conf iguring the same settings in multip le machines.
1-37 BEFORE USING THE MACHINE IMPORTANT POINTS ABOUT PAPER This section provides information that you should know before loading paper in the pape r trays. Be sure to read this sect ion before loading paper. NAMES AND LOCATIONS OF TRAYS The names of the trays are as follows.
1-38 BEFORE USING THE MACHINE Types of paper that can be used in each tray The following types of paper can be loaded in each tray. " – " in the table indicates "cannot be used". *1 "Heavy paper " is heavy pap er up to 110 lb s.
1-39 BEFORE USING THE MACHINE Paper that cannot be used • Specia l media for inkjet pr inters (fine paper, glo ssy paper, glossy film, etc.) • Carbon paper or thermal paper • Pasted pape r • Paper with clips • Paper with fo ld marks • Torn pape r • Oil-feed t ransparency film • Thin paper less than 15 lbs.
1-40 BEFORE USING THE MACHINE TRAY SETTINGS FOR TRAYS 1 TO 4 LOADING PAPER AND CHANGING THE PAPER SIZE A maximum of 500 sh eets of paper from size 5-1/2" x 8-1/2" to size 8-1/2" x 14" (A5 t o A4) can be loaded in trays 1 and 2.
1-41 BEFORE USING THE MACHINE 4 Insert the paper into the tray. Load the paper w ith the print side face up. The stack must not be higher than the indicator li ne (maximum of 500 sh eets). • If paper is loaded higher than the line, paper misfeeds may occur.
1-42 BEFORE USING THE MACHINE LOADING PAPER IN THE BYPASS TRAY The bypass tray ca n be used to print o n plain paper, envelop es, label sheets, and other special media. Up to 100 shee ts of paper can be loaded ( up to 40 sheets of heavy paper) fo r continuous printing similar to th e other trays.
1-43 BEFORE USING THE MACHINE IMPORTANT POINTS WHEN USING THE BYPASS TRAY • When using plai n paper other than SHARP standar d pap er or special med ia other than SHARP-r ecommended transparency film, or when printing on the reverse side of previously used paper, the paper must be loaded o ne sheet at a time.
1-44 BEFORE USING THE MACHINE Loading envelopes When inserting envelopes in the bypa ss tray, place them aligned to th e left side in the orientation shown be low. Only the front side o f envelopes can be printed on. Be su re to place the front side face do wn.
1-45 BEFORE USING THE MACHINE This section describe s the peripheral devices that can be us ed with the machine and explains how to u se the finisher, as well as Sharp O SA. PERIPHERAL DEVICES Peripheral devices can be insta lled on the machine to increase its range of functio nality.
1-46 BEFORE USING THE MACHINE FINISHER The finisher is equippe d with the of fset functi on, which of fsets each set of output f rom the pr evious set. In addition, ea ch set of sorted output can be stapled . PART NAMES The following part s can be accessed when the finish er is open.
1-47 BEFORE USING THE MACHINE SHARP OSA Sharp OSA (Open Syst ems Architecture) is an architectu re that enables external applicatio ns to be directly connected to a machine over a ne twork. When a machine that suppor ts Sharp OSA is used, the keys that are di splayed on the operation pane l and functions can be linked to an external app lication.
1-48 BEFORE USING THE MACHINE EXTERNAL ACCOUNT APPLICATION An external account ap plication can be used in "external au the ntication mode" or "external count mode". When external authenticatio n mode is used, the login screen is retrieved fr om the application when the machine is started.
1-49 BEFORE USING THE MACHINE This section explains how t o clean the machine and replace the toner cartridges and the toner collection con tainer. REPLACING THE TONER CARTRIDGES When it is time to replace a supply item, a message in structing you to replace the item will appear in the display.
1-50 BEFORE USING THE MACHINE 3 Take out the new tone r cartridge, hold it with both hands, and shake 5 or 6 times horizontally. • When shaking the toner cartridge, be sure to shake with the protective material inse rted in the cartridge. If you shake the cartridge afte r removing the protective material, toner may spill out.
1-51 BEFORE USING THE MACHINE 6 Close the front cover. • Before moving the machine , remove the toner cartridge. Mo ving the machine with the toner cartridge insta lled may cause a failure. • When the developer cartridge has bee n removed, do not remove or insert the toner cartridge.
1-52 BEFORE USING THE MACHINE REPLACING THE TONER COLLECTION CONTAINER The toner collection container collects excess toner that is produced durin g printing. When it is time to replace a supply it em, a message instructing you to replace t he item will appear in the display.
1-53 BEFORE USING THE MACHINE 3 Remove the toner collection container. • If the toner collection container is tippe d forward too far, it will not be possible to remo ve it. • Do not point the holes down as used toner will spill out. • Hold the container by both hands and lift it up slowly.
1-54 BEFORE USING THE MACHINE Caution • Do not throw the toner collec tion container into a fire. Toner may fly and cause burns. • Store the toner collection container out of th e reach of small children.
1-55 BEFORE USING THE MACHINE REPLACING THE DEVELOPER CARTRIDGE / DRUM CARTRIDGE Before replacing the developer cartr idge or drum cartrid ge, turn off the main po wer of the machine an d wait briefly.
1-56 BEFORE USING THE MACHINE 3 Open the main charger cover. (1) Turn the main charger cover lock levers in the direction of an arrow below. When the lock levers a re horizontal, the lo ck is released. (2) Grasp the lock levers and tip the cover forward.
1-57 BEFORE USING THE MACHINE 5 Shake the new developer cartridge 5 or 6 times as shown. Hold the developer cartridge firmly as shown below and shake forward and back, left and right. Remove the protecti ve material after shaking the deve loper cartridge.
1-58 BEFORE USING THE MACHINE 8 Grasp the developer cartridge lock and replace it on the machine. 9 Hold the developer cartridge wit h one hand and slowly remove the seal with the other hand. Slowly pull the seal straight and horizontally out. If excessive force is used or the sea l is pulled out diag onally, it may tear.
1-59 BEFORE USING THE MACHINE 12 Close the front cover. Take care that your fingers are not pinched when closing the cover. 13 Turn on the power. Switch the main power switch "ON" and press the [POWER] key ( ) on the opera tion panel to turn on the o peration panel power.
1-60 BEFORE USING THE MACHINE REPLACING THE DRUM CARTRIDGE When it is time to replace a supply it em, a message instructing yo u to replace the item will app ear in the display. When replacing a drum cart ridge, carefully check the indicated color. If black is indicated, replace t he drum cartridge for black.
1-61 BEFORE USING THE MACHINE 3 Remove the protective material from the drum cartridge and slowly insert the drum cartridge along the guides. Make sure that the mark on the drum cartridge is aligned with the mark on the machin e as you insert the dru m cartridge.
1-62 BEFORE USING THE MACHINE REPLACING THE STAPLE CARTRIDGE IN THE FINISHER When the staple cartridge runs out of staples, a message will appea r in the operation panel. Follow the procedure below to replace the st aple cartridge. 1 Open the cover. 2 While pressing the lever over to the left, slide the finisher to the left until it stops.
1-63 BEFORE USING THE MACHINE 5 Insert a new staple cartridge into the staple case as shown. Push the staple cartridge in until it clicks into place. 6 Replace the staple case. Push the staple case in until it clicks into place. 7 Slide the finisher back to the right.
1-64 BEFORE USING THE MACHINE REGULAR MAINTENANCE To ensure that the ma chine continues to provide top quality performance, periodically clean the machine . CLEANING THE MAIN CHARGER OF THE PHOTOCONDUCTIVE DRUM If black lines or colored lines appea r, use the charger cleaner to clean the main charg er.
1-65 BEFORE USING THE MACHINE 3 Release the lock leve rs and o pen the main charger cover. ☞ REPLACING THE DEVELOPER CARTR IDGE (page 1-55) 4 Remove the charger cleaner. (1) Flip down the charger cleaner lock (A) in the direction of the arrow, and lift the left end of the charger cleaner.
1-66 BEFORE USING THE MACHINE 6 Repeat step 5 with each of the other main chargers. There are a total of 4 places to be clea ned in the machine as shown. 7 Replace the charger cleaner in its original position. Insert the tip of the charger clea ner in toward the right and then press down on the end of the charger cleaner.
1-67 BEFORE USING THE MACHINE CLEANING THE BYPASS FEED ROLLER If you find that paper fed from the bypass tray misfeeds or is soiled by the roller, clean the roller.
1-68 BEFORE USING THE MACHINE 5 Turn on the power. Switch the main power switch "ON" and press the [POWER] key ( ) on the opera tion panel to turn on the o peration panel power.
1-69 BEFORE USING THE MACHINE CLEANING THE LASER UNIT When the laser unit inside t he machine becomes dirty, line patterns (co lored lines) may form in the printed imag e. Follow the steps below to clean the lase r unit. Identifying lines (colo red lin es) caused by a dirty laser unit • Colored lines alwa ys appear in the same pl ace.
1-70 BEFORE USING THE MACHINE 4 Make sure that the cleaner at the tip of the cleaning tool is not dirty. If the cleaner is dirty, remove the cleaner and replace it with a cle an one. For th e procedure for replacing the clea ner, see steps 5 through 7.
1-71 BEFORE USING THE MACHINE 8 Clean the laser unit. (1) Point the cleaner down and slowly insert the tool into the hole that you wish to clean. The parts of the wri ting unit that re quire cleaning are indicate d by labels simi lar to (A). (2) Insert the cleaning tool all the way into th e hole and then pull it back out.
1-72 BEFORE USING THE MACHINE 11 Install the toner collection container. ☞ REPLACING THE TONER C OLLECTION CONTAINER (page 1-52) 12 Close the front cover.
1-73 BEFORE USING THE MACHINE CLEANING THE PT CHARGER If black or colored lines still re main after the main charger ha ve been cleaned, use the PT charger cleaner to clean the PT charger. 1 Press the [POWER] key ( ) on the operation panel to turn off the panel power, and then switch the main power switch to the off position.
1-74 BEFORE USING THE MACHINE 5 Close the front cover. Take care that your fingers are not pinched when closing the cover. 6 Turn on the power. Switch the main power switch "ON" and press the [POWER] key ( ) on the opera tion panel to turn on the o peration panel power.
1-75 BEFORE USING THE MACHINE This section expla ins the text entry scre en. FUNCTIONS OF THE MAIN KEYS ENTERING TEXT Key Descripti on This key changes the text entry screen from the lower case screen to the upper case screen. The upper case screen will continu e to appear until the [Caps] key is selected again so that it is no longer highlighted.
1-76 BEFORE USING THE MACHINE Select this key and search results will appear based on the entere d characters. When this key is selected, the "Input Mode " screen appears. Input mode screen Select this key to sele ct character entry mode. Select this key to select sy mbol entry mode.
2-1 This chapter provid es detailed explanations o f the procedures for printing. For the procedur es for using the display of the ma chine, see " USING THE OPERATION PANEL " (page 1-8) in "1. BEFORE USING THE MACHINE". For the pro cedure for accessing the We b pages, see the Quick Start Guide.
2-2 PRINTING PRINT FUNCTIONS FOR SPECIAL PURPOSES . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-48 • PRINTING SPECIFIED PAGES ON DIFFERENT PAPER (Different Paper) . . . . . . . 2-48 • ADDING INSERTS WHEN P RINTING ON TRANSPARENCY FILM (Transparency Inserts) .
2-3 PRINTING PRINTER FUNCTION OF THE MACHINE The machine is equippe d standard with a full color printing funct ion. To enable printing fr om your computer, a printer driver must be installed. See the table below to det ermine which printer driver to use in your environme nt.
2-4 PRINTING BASIC PRINTING PROCEDURE The following example expla ins how to print a document fr om "WordPad ", which is a standard accessory pro gram in Windows. PRINTING FROM WINDOWS 1 Select [Print] from the [File] menu of WordPad. If you are using W indows 7, click the button.
2-5 PRINTING 3 Select print settings. (1) Click the [Paper] tab. (2) Select the paper size. To select settings on other tabs, click the desired tab and then select the settings. (3) Click the [OK] button. • Make sure the pa per size is the sa me as t he paper size set in the software application.
2-6 PRINTING SELECTING THE PAPER This section explains how to configur e the "Pape r Selection" settin g on the [ Paper] tab of the printer driver properties window. Before printin g, check the paper sizes, pa per types, and paper remainin g in the machine's trays.
2-7 PRINTING PRINTING ON ENVELOPES The bypass tray can be used to pr int on special media such as envelopes. The proced ure for printing on an envelope from the printer driver properties screen is descri bed below.
2-8 PRINTING PRINTING WHEN THE USER AUTHENTICATION FUNCTION IS ENABLED When the user authenticat ion function is en abled, your us er information (login name, password, etc.) must be entered in the printer dr iver properties window bef ore you can print.
2-9 PRINTING 2 Enter your login name and password. (1) Click the [Job Handling] ta b. (2) Enter your user information. • When authentication is by login name/password Select the [Login Name] and [Password] checkboxes so that checkmarks appear, and enter your login name and password.
2-10 PRINTING VIEWING PRINTER DRIVER HELP When selecting settings in the print er driver, you can display Help to view explanations of the sett ings. Pop-up help Help can be displayed for a setting by clicking the setting and pr essing the [F1] key. * To view Help for a setting in Windows 98/Me/NT 4.
2-11 PRINTING SAVING FREQUENTLY USED PRINT SETTINGS Settings configur ed on each of the tabs at the time of prin ting can be saved as user se tting s. Saving frequently used settings or complex color settings u nder an assigned name make s it easy to select those sett ings the next time you need to use them .
2-12 PRINTING 3 Check and save the settings. (1) Check the displayed settings . (2) Enter a name for the settings (maximum of 20 characters). (3) Click the [OK] button. 4 Click the [OK] button. 5 Start printing. • Up to 30 sets of user settings can be saved.
2-13 PRINTING USING SAVED SETTINGS Deleting saved settings Select the us er settings t hat you want to delete in (1) of step 2 above, and click the [Delet e] button. 1 Open the printer driver properties window from the print window of the software application.
2-14 PRINTING CHANGING THE PRINTER DRIVER DEFAULT SETTINGS The default se ttings of the printer dr iver can be changed using t he procedure below. The settin gs selected using this procedure are saved an d become th e default se ttings when printing from a software application.
2-15 PRINTING 4 Configure the settings and click the [OK] button. For explanations of the settings, see printer driver Help..
2-16 PRINTING BASIC PRINTING PROCEDURE The following example expla ins how to print a document from the stand ard accessory program "TextEdit" in Mac OS X ("SimpleText" in Mac OS 9). SELECTING PAPER SETTINGS Select paper settings in the pr inter driver before selecting the print command .
2-17 PRINTING PRINTING 1 Select [Print] from the [File] menu of TextEdit. In Mac OS 9, select [Print ] from the [File] menu of SimpleText. The menu used to execute printing may vary dependi ng on the software application. 2 Make sure that the correct printer is selected.
2-18 PRINTING 4 Click the [Print] button. Printing begins. When removing p rinted output... Remove the output horizontally so that it does not get caug ht on the actuator for output tray full detectio n. If the actuator comes off, see " The actuator came off (when a finisher is not installed) " (page 4-22) in "4.
2-19 PRINTING SELECTING THE PAPER This section explains the [Paper Fe ed] settings ("Paper Source" setting in [Gener al] in Mac OS 9) in the print settings window.
2-20 PRINTING PRINTING ON ENVELOPES The bypass tray can be used to pr int on special media such as envelopes. The proced ure for printing on an envelope from the printer driver properties screen is descri bed below.
2-21 PRINTING PRINTING WHEN THE USER AUTHENTICATION FUNCTION IS ENABLED When the user authent ication function is enabled, yo u must enter your user informa tion (login name, password, etc.
2-22 PRINTING 3 Start printing. (1) Enter your user information. • When authentication is by login name/password Enter your login na me in "Login Name" and your password in "Password" (1 to 32 characters). • When authentication is by user num ber Enter your user number (5 to 8 digits) in "User Number".
2-23 PRINTING This section explains freq uently used functions. • SELECTING THE COLOR MODE • TWO-SIDED PRINTING (page 2-26) • FITTING THE PRINT IMAG E TO THE PAPER (page 2-28) • PRINTING MULTI.
2-24 PRINTING BLACK AND WHITE PRINTING [Black and White] can be selected on the [Ma in] tab as well as on the [Color] tab. Click the [Black and White Pr int] checkbox on the [Main] tab so that a checkmar k appears. The [Black and White Print] checkbox on the [Main] tab and the "Color Mode" settin g on the [Color] tab a re linked.
2-25 PRINTING SELECTING A PRINT MODE SETTING This section explains the procedure for se lecting a print mode setting. The "Print Mode Settings" co nsist of the following three items: Normal: This mode is suitable fo r printing d ata such as regular text or a table.
2-26 PRINTING TWO-SIDED PRINTING The machine can prin t on both sides of the paper. This func tion is useful for many pu rp oses, and is particularly convenient when you want to cr eate a simple pamphlet. Two-side d printing also helps conserve paper.
2-27 PRINTING (1) Select [Layout]. (2) Select [Long-edged binding] or [Short-edged binding]. Macintosh (1) (2) • In Mac OS X v10.2.8, select the settings in [Advanced]. • In Mac OS 9, sele ct [Output/Document Style] and then select [Flip on long edge] or [Flip on short edge].
2-28 PRINTING FITTING THE PRINT IMAGE TO THE PAPER This function is used to automatically enlarge or r educe the pr inted image to match the siz e of the pa per loaded in the machine.
2-29 PRINTING PRINTING MULTIPLE PAGES ON ONE PAGE This function can be used to reduce the print image and pr int multiple pages on a single sheet of paper. This is convenient when you want to print multiple images such as photos on a single sheet of paper, and when you want to conserve paper.
2-30 PRINTING (1) Configure the settings on the [Main] tab. (2) Select the number of pages per shee t. (3) If you wish to print borderlines, click the [Border] checkbox so that a checkmark appear s. (4) Select the order of the pages. (1) Select [Layout].
2-31 PRINTING STAPLING OUTPUT The staple functi on can be used to staple output . This function save s considerable time when prepar ing handouts for a meeting or ot her stapled materials. The st aple function can also be used in combination with two-sid ed printing to create materia ls with a more sophisticated appearance.
2-32 PRINTING (1) Configure the settings on the [Main] tab. (2) Select the "Binding Edge". (3) Select the staple function. For the staple functi on, select the n umber of staples in the "Staple" menu. (1) Select [Printer Features].
2-33 PRINTING This section explains con venient functio ns for specific p rinting objectiv es. • CONVENIENT FUNCTIONS FOR CREATING PAMPHLETS AND POSTERS • FUNCTIONS TO ADJUST THE SIZE AND ORIENTAT.
2-34 PRINTING (1) Select [Printer Features]. (2) Select the "Binding Edge". (3) Select [Tiled Pamphlet] or [2-Up Pamphlet]. Macintosh (3) (1) (2) • In Mac OS X v10.2.8, select from the "2-Side Printing" and "Bi nding Edge" menus in [Advanced].
2-35 PRINTING INCREASING THE MARGIN (Margin Shift) This function is used to shift the print image to incre ase the margin at the left, rig ht, or top of the paper. Th is is convenient when you wish to staple or punch t he output but the binding ar ea overlaps the text.
2-36 PRINTING CREATING A LARGE POSTER (Poster Printing) (This function is only availa ble in Windows.) One page of prin t data can be enlarge d and printed using multiple sheet s of paper (4 sheets (2 x 2), 9 sheet s (3 x 3) or 16 sheets (4 x 4)). The sheet s can then be attached toget her to create a large poster.
2-37 PRINTING FUNCTIONS TO ADJUST THE SIZE AND ORIENTATION OF THE IMAGE ROTATING THE PRINT IMAGE 180 DEGREES (Rotate 180 degrees) This feature rotat es the image 180 degrees so that it can be printed corre ctly on paper that can only be loaded in one orienta tion (such as envelopes o r paper wit h punch holes).
2-38 PRINTING ENLARGING/REDUCING THE PRINT IMAGE (Zoom/XY-Zoom) This function is used to enlarge or re duce the image to a selected percentag e. This allows you to enlarge a small image or add margins t o the paper by slightly reducing an image.
2-39 PRINTING ADJUSTING LINE WIDTHS WHEN PRINTING (Line Width Settings) (This function is only availa ble in Windows.) When lines in sp ec ial applications such as CAD cannot be printed correctly, this s etting can b e used to a djust line widths, such as making overall line widths wider.
2-40 PRINTING REVERSING THE IMAGE (Mirror Image) The image can be reve rsed to create a mirror image. This function can be used to conveniently print a design for a woodblock print or other printing medium. (This function can be used when the PS printe r driver is used.
2-41 PRINTING COLOR MODE ADJUSTMENT FUNCTION ADJUSTING THE BRIGHTN ESS AND CONTRAST OF THE IMAGE (Color Adjustment) The brightness and contr ast can be adjusted in the print settings when pr inting a photo or other image. Thes e settings can be used for simple correcti ons when you do not have image editing software installed on your computer.
2-42 PRINTING PRINTING FAINT TEXT AND LINES IN BLACK (Text To Black/Vector To Black) (This function is only availa ble in Windows.) When printing a color image in grayscale , color text and lines that are faint can be printed in black. (Ras ter data such as bitmap images cannot be adjust ed.
2-43 PRINTING SELECTING COLOR SETTINGS TO MATCH THE IMAGE TYPE (Advanced Color) Preset color setting s are available in the machin e's printer driver for various uses. These enable printing u sing the most suitable color settings for the color image type .
2-44 PRINTING (1) Select [Color]. (2) Select color print settings. To use the Mac OS Color M anagement functi on, select the [ColorSync] checkbox . When this is done, "Image Type" cannot be selected. (3) Select the color image type. An image type to match the data to be printed can be selected from the pull-down menu.
2-45 PRINTING FUNCTIONS THAT COMBINE TEXT AND IMAGES ADDING A WATERMARK TO PRINTED PAGES (Watermark) Faint shadow-like text can be added to the background of the printed imag e as a watermark. The size, color, density, angle, and pr int position of the watermark text can be adjusted.
2-46 PRINTING PRINTING AN IMAGE OVER THE PRINT DATA (Image Stamp) (This function is only availa ble in Windows.) A bitmap or JPEG image stored on your comp uter can be printed over t he print data. The size, posit ion, and angle of the image ca n be adjusted.
2-47 PRINTING CREATING OVERLAYS FOR PRINT DATA (Overlays) (This function is only availa ble in Windows.) The print data can be printed in a previously created overlay.
2-48 PRINTING PRINT FUNCTIONS FOR SPECIAL PURPOSES PRINTING SPECIFIED PAG ES ON DIFFERENT PAPER (Different Paper) • Using this function in a Windows environ ment The front and ba ck cover and specified pages o f a document can be printed on pape r that is different from the ot her pages.
2-49 PRINTING (This function can only be used in Mac OS 9, Mac OS X v10.4.11, v10.5 to 10.5.8 and 10.6.) (1) Select [Printer Features]. (2) Select [Different Paper]. (3) Select cover insertion settings. Select the print setting, paper tray, and pape r type for the cover page and last page.
2-50 PRINTING ADDING INSERTS WHEN PRINTING ON TRANSPARENCY FILM (T ransparency Inserts) When printing on tran sparency film, this function he lps prevent the sheets of transparency film from stic king together by inserting a shee t of paper between each sheet of film.
2-51 PRINTING PRINTING A CARBON COPY (Carbon Copy) (This function is only availa ble in Windows.) This function is used to print an ad ditional copy of the print image on pap er that is the same size but from a differen t paper tray.
2-52 PRINTING TWO-SIDED PRINTING WITH SPECIFIC PAGES PRINTED ON THE FRONT SIDE (Chapter Inserts) (This function is only availa ble in Windows.) You can have spec ific pages printed on the front side of the paper.
2-53 PRINTING This function is used to stor e a print job as a file on the machine's hard drive, allo wing the job to be printed from the operation pan el when needed. When printing fr om a computer, a password (5 to 8 digits) can be set to maintain the secrecy of information in a stored file.
2-54 PRINTING SAVING PRINT FILES (Retention) The explanations assu me that the paper size and othe r basic settings have already been selected. For the basic procedure for printing and the steps for o.
2-55 PRINTING (1) Select [Job Handling]. (2) Select the retention setting. Click the [Retention] checkb ox . Select the reten tion method in "Retention Se ttings ". To simplify operation the next time the same password is set, click the (lock) button after entering the password (5 to 8 digit number).
2-56 PRINTING PRINTING A STORED FILE A file stored using r etention function can be retrieved a nd printed when needed. The setting s used when the file was stored are also stored, and thus t he file can be printed again using those set tings.
2-57 PRINTING 4 Select the [Print and Delete] key or the [Print and Save] key. • If the [Print and Delete] key is selected, the files will be automati cally deleted after printi ng. • If the [Print and Save] key is selected, the fi les will be saved after printing.
2-58 PRINTING Automatically print all stored data When user authentication is ena bled, all retained (stored) prin t jobs of a user who logs in can be printed automatically after log in.
2-59 PRINTING PRINT SETTINGS SCREEN When a file is stored in the machine, the print settings that we re in effect when th e file was printed from the printer driver are also stored. However , the settings below can be changed when you print a stored file.
2-60 PRINTING MULTI-FILE PRINTING Multiple files in a folder c an be selected for printing . Keys in the display can be selected with the arrow key s and the [OK] key. 1 Select the [Multi-File Print] key. 2 Select the keys of the files that you wish to print.
2-61 PRINTING 4 Printing a selected file. The number of selected files appear s in the number of selected files display. If you wish to use the nu mber of copies that was stored with the file, go to step (3). (1) Select the [Apply the Number from Stored Setting of Each Job] checkbox so that it is not selected ( ).
2-62 PRINTING Batch printing All files that have the sam e user name and password can be print ed at once. When the [Multi -File Print] key is selected, it changes into the [Batch Print] key. Keys in the display can be selected with the arrow key s and the [OK] key.
2-63 PRINTING 3 Select the user name. There are three ways to select t he user name: (A) Se lect the [User List] key and press the [OK] key. A user list (D) appears. Select with the keys and press the [OK] key. If you accidentally select the wrong user name, select the key of the corre ct name.
2-64 PRINTING 4 If a password has been established, select the [Password] key. Enter the password with the soft numeric keypad (5 to 8 digits) and select the [OK] key. For the procedure for entering numbers, see " Ente ring numbers " (page 1-9) in "1.
2-65 PRINTING DELETING A STORED FILE Stored files that are no longer needed can be delete d. ☞ PRINTING A STORED FILE ( page 2-56 ) Keys in the display can be selected with the arrow key s and the [OK] key. 1 Select the [Delete] key. 2 Check the file and then select the [Yes] key.
2-66 PRINTING Automatic deletion of files You can have stor ed data automatically deleted at regular intervals by specifying a pe ri odic del etion time. Per iodic deletion of files store d in the machine helps to prevent the leaking of sensitive information and frees spa ce on the hard drive.
2-67 PRINTING SEARCHING FOR A STORED FILE When there are many stor ed files, it may take time to find a file. The search function can be use d to find a file quickly. Searching is possible even when you only know par t of the file name. Keys in the display can be selected with the arrow key s and the [OK] key.
2-68 PRINTING 4 Using the user name to search There are three ways to select t he user name: (A) Se lect the [User List] key and press the [OK] key. A user list (D) appears. Select with the keys and press the [OK] key. If you accidentally select the wrong user name, select the key of the corre ct name.
2-69 PRINTING When you do not have the printer driver installed on your computer, or when the software application used to o pen a file that you wish to print is not available, you can print directly to the machine without usin g the printer driver. The file types (and correspo nding extensions) that can be printe d directly are shown below.
2-70 PRINTING DIRECTLY PRINTING A FILE ON AN FTP SERVER When an FTP server is con figured in the machine' s Web pages, you can sp ecify and print a file on the FTP server from the operation pan el of the machine. This saves you the trou ble of downloading the file and print ing it from a computer.
2-71 PRINTING 4 Select the key of the fi le that you wish to print. • The icon appears to the left of keys of files that can be printed. • The icon is displayed to the left of keys of folders on the FTP server. To display the files and folders in a folder, select the key of the folder.
2-72 PRINTING DIRECTLY PRINTING A FILE IN USB MEMORY A file in a USB memory device connected to the mach ine can be printed from the operation pa nel of the machine without using the printer dr iver.
2-73 PRINTING 4 Select the key of the fi le that you wish to print. • The icon appears to the left of keys of files that can be printed. • The icon is displaye d to the left of keys of folders in th e USB memory. To display the files and folders in a fo lder, select the key of the folder.
2-74 PRINTING DIRECTLY PRINTING A FILE IN A NETWORK FOLDER You can use the machine 's operation panel to select and pr int a file on a server or in a shared folder of an individual's computer on the same network as the machine. Keys in the display can be selected with the arrow key s and the [OK] key.
2-75 PRINTING 3 Access the network folder. (1) Select the key of the work group that you wish to access. (2) Select the key of the server or computer that you wish to access. If a screen appears prompting you to enter a user name and password, che ck with your server ad ministrator and enter the appropriate user name and password.
2-76 PRINTING 4 Select the key of the fi le that you wish to print. • The icon appears to the left of keys of files that can be printed. • The icon is displaye d to the left of keys of folders in th e network folder. To display the files and folders in a folder , select the key of the folder.
2-77 PRINTING DIRECTLY PRINTING FROM A COMPUTER Settings can be configur ed in the Web pages of the machine to enable direct printing from a computer without using the printer driver. SUBMIT PRINT JOB You can specify a file to be p rinted dire ctly without using the printe r driver.
2-78 PRINTING E-MAIL PRINT An e-mail account can be conf igured in the machine to have the machine per iodically check your mail server and automatically print received e-mail attachments without using the printer driver. • Configuring settin gs To use E-m ail Print, you m ust first configu re an e-mail account in the machine.
2-79 PRINTING JOB STATUS SCREEN The job status screen is displaye d when the [JOB STATUS] key on the operation panel is p ressed. The job status screen shows the status of job s by mode. When the [JOB STATUS] key is pressed, the job status screen of the mode that was being used before the key was pr essed appears.
2-80 PRINTING Job key display Each job key shows the positio n of the job in the job queue and the current st atus of the job. (1) Indicates the nu mber (position) of the job in the job queue. When the job currently being printe d is finished, the job moves up one position in the job queue.
2-81 PRINTING PRINTING AN ENCRYPTED PDF FILE Encrypted PDF is used to pr otect a PDF file by requiring the en try of a p assword to print o r edit the file. To dir ectly print an encrypted PDF file on an FTP server or in a USB memory devic e, etc. connecte d to the machine, follow the steps below to enter the pa ssword and begin printing.
2-82 PRINTING GIVING A PRINT JOB PRIORITY/CANCELING A PRINT JOB GIVING A PRINT JOB PRIORITY You can give priorit y to a print job that is waiting to be print ed and print it ahead of the other jobs. Keys in the display can be selected with the arrow key s and the [OK] key.
2-83 PRINTING CANCELING A PRINT JOB A job being printed, a job waiting to be printed, or a spooled job can be cance led. Keys in the display can be selected with the arrow key s and the [OK] key. 1 Press the [JOB STATUS] key. 2 Cancel the job. (1) Change the print job status mode to [Spool] or [Job Queue].
2-84 PRINTING CHANGING TO ANOTHER PAPER SIZE AND PRINTING WHEN PAPER RUNS OUT If printing st ops because the machine ran ou t of paper, or if t he size of paper specified in the printer driver is n ot loaded in the machine, a message will a ppear in the display.
2-85 PRINTING 3 Select the [Paper] key. 4 Select the key of the tray that has the paper you wish to use. Printing begins. If you changed to a different paper si ze, printing may not take place correctly; for example part of the text or image may run off the paper.
2-86 PRINTING RETRIEVING AND USING A FILE FROM THE JOB STATUS SCREEN Files stored selecting other than "Hold Only" in "Retention Settings" ca n be manipulated from the job status comp lete screen. Keys in the display can be selected with the arrow key s and the [OK] key.
2-87 PRINTING 3 Select the desired file in the completed jobs. (1) Select the key of the desired file. (2) Select the [Call] key. The job settings screen appears.
2-88 PRINTING PRINTER DRIVER SPECIFICATION LIST Available functions and ou tput results may vary de pending on the type of printer driver being used . APPENDIX Function PCL6 PCL5c PS Windows PPD *1 Ma.
2-89 PRINTING *1 The specifications of each functi on in Windows PPD and Macintosh PPD va ry depending on the operating syst em version and the softwar e application. *2 Cann ot be used in Windows NT 4.0. *3 On ly 2-Up and 4-Up printing can be used in Wind ows 98.
3-1 This chapter explains the system settings, which are used to conf igure a variety of parameters to suit the aims and needs of your workplac e. The current selections that have been mad e for the settings can be viewed or prin ted out.
3-2 SYSTEM SETTINGS List Print (Adminis trator) . . . . . . . . . . . . . . . . . . . 3-26 Security Settings . . . . . . . . . . . . . . . . . . . . . . . . . . 3-2 7 Product Key . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-28 Storing/Calling of System Settings .
3-3 SYSTEM SETTINGS System Settings The system settings ar e used to configure a variety of param ete rs to suit the aims and needs of your workplace. The system settings are also used to display or pr int out the current sett ings and status of the m achine.
3-4 SYSTEM SETTINGS Configuring the System Settings There are two ways to co nfigure the system settings: using the machin e's operation panel, and using the We b page that appears when the mach ine's Web server is accessed. The Web page enables easy co nfiguration of the settings from yo ur computer via the network.
3-5 SYSTEM SETTINGS Common Operation Methods This section explains special operation methods that are common t o all system settings. Be sure to r ead this sectio n, as the inf ormation is om itte d in the explanations of some of the individu al settings.
3-6 SYSTEM SETTINGS Accessing the Web Server in the Machine When the machine is connected to a network, the machine' s built-in Web server can be accessed from a Web browser on your com puter. For the procedur es for using the display, see " USING THE WEB PAGE " (page 1-12 ) in "1.
3-7 SYSTEM SETTINGS OPERATION PANEL (GENERAL) This section explains system setti ngs that can be configured on the ope ration panel by general users. Accessing the System Settings (General) Make sure that the machine is in the standby state and then press the [SYSTEM SETTINGS] key on the operation pane l.
3-8 SYSTEM SETTINGS OPERATION PANEL (GENERAL) System Settings (General) List When the system settings ar e accessed with general rights, the following items appear. For items that can only be accessed with administrator rig hts, see " System Settings (Administ rator) List " (page 3-20).
3-9 SYSTEM SETTINGS OPERATION PANEL (GENERAL) List Print (User) Paper Tray Settings * When a 500-sheet paper feed uni t is installed. USB-Device Check Item Factory default setting Page ■ List Print .
3-10 SYSTEM SETTINGS OPERATION PANEL (GENERAL) Display Contrast Use this to set the contrast of the machine's display. Select the [Display Contr ast] key. In the screen that appea rs, select the [Lighter] key or the [Darker] key to adju st the contrast.
3-11 SYSTEM SETTINGS OPERATION PANEL (GENERAL) Default Settings The default settings for operation of the machine can be configured. Select the [Default S ettings] key and select the set tings. Clock Adjust Use this to set the date and time in t he machine's built-in clock.
3-12 SYSTEM SETTINGS OPERATION PANEL (GENERAL) Keyboard Select The layout of the keyboard th at appears in text entry screens can be changed. The keyboard layo uts that can be selecte d are shown below . List Print (User) Lists showing the setti ngs and information stored in the machine can be printed.
3-13 SYSTEM SETTINGS OPERATION PANEL (GENERAL) Paper Tray Settings Paper tray and paper ty pe settings are explained in this sect ion. Select the [Paper Tr ay Settings] key to config ure the settings. Tray Settings These settings specif y the paper type, paper size, and functi ons allowed for each paper tray.
3-14 SYSTEM SETTINGS OPERATION PANEL (GENERAL) Tray Settings *1 When a 500-sheet paper feed unit is installed. *2 Heavy Paper : 28 lbs. bond to 110 lbs.
3-15 SYSTEM SETTINGS OPERATION PANEL (GENERAL) Paper Type Registration Store a paper t ype when the desired pap er type does not appear as a selection or when you wish t o create a new set of paper proper ties.
3-16 SYSTEM SETTINGS OPERATION PANEL (ADMINISTRATOR) This section explains the system settings that are configured by the administr ator of the machine. Accessing the System Settings (Administrator) To access the system sett ings (administrator), th e administrator must log in as explained below.
3-17 SYSTEM SETTINGS OPERATION PANEL (ADMINISTRATOR) When User Authentication is Enabled When "User Au thentication" ( Web page o nly) is enabled , follow the procedure be low to log in. When user authentication is by lo gin name and password (and e-mail address) Keys in the display can be selected with the arrow key s and the [OK] key.
3-18 SYSTEM SETTINGS OPERATION PANEL (ADMINISTRATOR) 2 Log in. (1) Select the [Administrator] key. (2) Select the [Password] key. Enter the administrator password in the administrator password entry screen. (3) Select the [OK] key. This completes the administrator login procedure.
3-19 SYSTEM SETTINGS OPERATION PANEL (ADMINISTRATOR) Login by user number Keys in the display can be selected with the arrow key s and the [OK] key. 1 Select the [Admin Login] key. 2 Log in. (1) Select the [Password] key. Enter the administrator password in the administrator password entry screen.
3-20 SYSTEM SETTINGS OPERATION PANEL (ADMINISTRATOR) System Settings (Administrator) List The system settings that appe ar following administrator logi n a re shown below.
3-21 SYSTEM SETTINGS OPERATION PANEL (ADMINISTRATOR) Network Settings List Print (Administrator) Security Settings Item Factory default setting Page ■ Network Settings 3-25 ● IPv4 Settings DHCP 3-.
3-22 SYSTEM SETTINGS OPERATION PANEL (ADMINISTRATOR) Product Key * It may not be possible to use some settings, depending on the periph eral devices installed.
3-23 SYSTEM SETTINGS OPERATION PANEL (ADMINISTRATOR) Energy Save The Energy Save setti ngs help reduce power costs. F rom an environmental pe rspective, these settings also help reduce pollution and conser ve natural resources. Sele ct the [Energy Save] key to configure t he settings.
3-24 SYSTEM SETTINGS OPERATION PANEL (ADMINISTRATOR) Operation Settings Settings relate d to machine operation can be confi gured. Select the [Opera tion Settings] key to configure the sett ings. Other Settings Keys Touch Sound This setting is used to adju st (or turn o ff) the volume of the beep t hat sounds wh en you sele ct a key.
3-25 SYSTEM SETTINGS OPERATION PANEL (ADMINISTRATOR) Network Settings Network setting s are describe d below. Sele ct the [Network Settings] key to configure the settings. IPv4 Settings When using the machine on a TCP/IP (IPv4) network, use this setting to configure the IP address of the machin e.
3-26 SYSTEM SETTINGS OPERATION PANEL (ADMINISTRATOR) List Print (Administrator) This is used to print lists and repor ts that are only for us e by the ad ministrator of the machine. Select the [List Print (Administrat or)] key to configure the sett ings.
3-27 SYSTEM SETTINGS OPERATION PANEL (ADMINISTRATOR) Security Settings The following settin gs are related to security. Select th e [Security Settings] key to configur e the settings. SSL Settings SSL can be used for data transmissio n over a network.
3-28 SYSTEM SETTINGS OPERATION PANEL (ADMINISTRATOR) Product Key The procedures f or entering the product keys of the expansion kits are explained below. Select th e [Product Ke y] key to configure the settings. Serial Number This displays the serial number that is required to obtain the product k ey.
3-29 SYSTEM SETTINGS OPERATION PANEL (ADMINISTRATOR) Storing/Calling of System Settings The current system sett ings can be stored, previously sto red system settings can be retrieve d, and the factory default system settings can be res tored. Select the [Storing/Calling of System Settings] key to configure the settings.
3-30 SYSTEM SETTINGS OPERATION PANEL (ADMINISTRATOR) Sharp OSA Settings External Account Setting External Accou nt Control When this setting is enabled, the machine ent ers external tota ling mode and the totaling funct ion can be used via an external account app lication.
3-31 SYSTEM SETTINGS WEB PAGE (GENERAL) This section explains system setti ngs that can be configured in the Web page by gen eral users. These settings are accessed by selec ting [System Setting s] in the Web page menu ba r. System Settings (General) List When the system settings ar e accessed with general rights, the following items appear.
3-32 SYSTEM SETTINGS WEB PAGE (GENERAL) List Print (User) Paper Tray Settings * When a 500-sheet paper fe ed unit is installed. Paper Type Registration Item Factory default setting Page ■ List Print.
3-33 SYSTEM SETTINGS WEB PAGE (GENERAL) Printer Condition Settings * When a finisher is installed. USB-Device Check Item Factory default setting Page ■ Printer Condition Settings 3-41 ● Printer De.
3-34 SYSTEM SETTINGS WEB PAGE (GENERAL) Total Count This function shows the page count in each mod e. Select [System Settings] - [ Total Count ] from the me nu bar. Job Count This displays or prints out the counts of all jobs. Device Count This is used to display or print the coun ts of the peripheral devices installed on th e machine.
3-35 SYSTEM SETTINGS WEB PAGE (GENERAL) Default Settings The default settings for operation of the machine can be configured. Sele ct [System Settings] - [Default Settings] from t he menu bar and configure eac h setting. Clock Adjust Use this to set the date and time in t he machine's built-in clock.
3-36 SYSTEM SETTINGS WEB PAGE (GENERAL) Keyboard Select The layout of the keyboard th at appears in text entry screens can be changed. The keyboard layo uts that can be selecte d are shown below . List Print (User) Lists showing the setting s and information stored in the machin e can be printed.
3-37 SYSTEM SETTINGS WEB PAGE (GENERAL) Paper Tray Settings Paper tray and paper ty pe settings are explained in this sect ion. Select [Syste m Settings] - [Paper Tray Set tings] from the menu bar and configure ea ch setting. A displayed tray name can b e selected to open the tray settings scr een.
3-38 SYSTEM SETTINGS WEB PAGE (GENERAL) Settings of each tray The following settin gs can be configured. Item Description Type Select the type of paper t hat is loaded in the tray. The paper types that can be selected vary by paper tray. For more in formation, see " Tray Settings " (page 3-39).
3-39 SYSTEM SETTINGS WEB PAGE (GENERAL) Tray Settings *1 When a 500-sheet paper feed un it is installed. *2 Heavy Paper : 28 lbs. bond to 110 lbs. index (106 g /m 2 to 209 g /m 2 ) heavy paper *3 The size that is automatically detecte d is set in " Select Similar Sizes for Auto Detection " in the b ypass tray settings screen (see below).
3-40 SYSTEM SETTINGS WEB PAGE (GENERAL) Custom Size Registration (Bypass) If you frequently use a special non- standard paper size in the bypass tray, you can store that paper size . Storing the paper size sa ves you the trouble of setting the size each time you need to use it.
3-41 SYSTEM SETTINGS WEB PAGE (GENERAL) Printer Condition Settings The Printer Condit ion Settings are used to configure ba sic printer settings and set tings for printing from a DOS application. Select [Syst em Settings] - [Printer Co ndition Settings] from the menu ba r and configure each setting.
3-42 SYSTEM SETTINGS WEB PAGE (GENERAL) *1 This setting is used to adjust the line w idth of vector graphics (black & wh ite printing o nly). Except for CAD and other specialized uses, there is normally no need t o change this setting. When "0" is selected, all lines are printed at a width of 1 dot.
3-43 SYSTEM SETTINGS WEB PAGE (GENERAL) PostScript Setting To configure se ttings for printing an er ror description when a PostScript data print error occurs a nd settings for reception of PostScript data in binary format, click the [PostScript Setting] ta b.
3-44 SYSTEM SETTINGS WEB PAGE (ADMINISTRATOR) This section explains system sett ings that can be configured in the Web pag e by an administrator. These settings are accessed by selec ting [System Setting s] in the Web page menu ba r.
3-45 SYSTEM SETTINGS WEB PAGE (ADMINISTRATOR) System Settings (Administrator) List The system settings that appe ar following administrator logi n a re shown below.
3-46 SYSTEM SETTINGS WEB PAGE (ADMINISTRATOR) Device Control *1 When a 500-sh eet paper feed unit i s installed. *2 When a finisher is instal led. *3 When a color-related problem has occurred.
3-47 SYSTEM SETTINGS WEB PAGE (ADMINISTRATOR) Printer Settings Item Factory default setting Page ■ Printer Settings 3-58 ● Default Settings 3-58 X Prohibit Notice Page Printing Enabled 3-58 X Proh.
3-48 SYSTEM SETTINGS WEB PAGE (ADMINISTRATOR) Print Hold Setting List Print (Administrator) * When network connection is enabled . Sharp OSA Settings Item Factory default setting Page ■ Print Hold S.
3-49 SYSTEM SETTINGS WEB PAGE (ADMINISTRATOR) Enable/Disable Settings *1 When a 500-sh eet paper feed unit i s installed. *2 When a finisher is instal led.
3-50 SYSTEM SETTINGS WEB PAGE (ADMINISTRATOR) Product Key * It may not be possible to use some settings, depending on the periph eral devices installed.
3-51 SYSTEM SETTINGS WEB PAGE (ADMINISTRATOR) Energy Save The Energy Save setti ngs help reduce power costs. F rom an environmental pe rspective, these settings also help reduce pollution and conser ve natural resources. Sele ct [System Settings] - [Energy Save] from the menu bar and configure each setting.
3-52 SYSTEM SETTINGS WEB PAGE (ADMINISTRATOR) Operation Settings Settings relat ed to machine oper ation can be configured . Select [System Settin gs] - [Operation Setti ngs] from the menu bar and configure each set ting. Keys Touch Sound This setting is used to adjust (or turn off) the volume of the beep that sounds when you select a key.
3-53 SYSTEM SETTINGS WEB PAGE (ADMINISTRATOR) Remote Operation Settings Configure settings req uired for remote operation of the machine from a computer connected t o the same network.
3-54 SYSTEM SETTINGS WEB PAGE (ADMINISTRATOR) Device Control These settings contro l devices installed on the machine. Select [System Sett ings] - [Device Control] from the menu bar and configure each sett ing. Disabling of Duplex This is used to disable two-sided printing , such as when the duplex mod ule malfunctions.
3-55 SYSTEM SETTINGS WEB PAGE (ADMINISTRATOR) Color Adjustments Depending on the machine u sage conditions and ambient environment , color drift may occur.
3-56 SYSTEM SETTINGS WEB PAGE (ADMINISTRATOR) (3) View the test page from directly in front, and select the cell that is closest to the neutral gray. Place five sheets of white plain paper under the printed test page so that no background color or pattern shows through the test page.
3-57 SYSTEM SETTINGS WEB PAGE (ADMINISTRATOR) (3) Place the color chart that ac companies the machine on the test page. Place five sheets of white plain paper under the printed test page so that no background color or pattern shows through the test page.
3-58 SYSTEM SETTINGS WEB PAGE (ADMINISTRATOR) Printer Settings Settings relate d to the printer function can be config ured Default Settings Printer condition setting s are described below. Select [Syste m Settings] - [Printer Setting s] - [Default Settings] in the menu bar, and conf igure the settings.
3-59 SYSTEM SETTINGS WEB PAGE (ADMINISTRATOR) Interface Settings These settings are used to control and monitor data tr ans mitted to the USB port or networ k port of the machine. Select [System Settings] - [P rinter Settings ] - [Interfac e Settings] in the menu bar, and con figure the set tings.
3-60 SYSTEM SETTINGS WEB PAGE (ADMINISTRATOR) Print Hold Setting Settings for Print Hold (Reten tion) can be configured. Sele ct [System S ettings] - [Print Hold Setting] from the me nu bar and configure each sett ing.
3-61 SYSTEM SETTINGS WEB PAGE (ADMINISTRATOR) List Print (Administrator) This is used to pr int lists and reports that are only for use by th e administrator of the machine. Select [System Sett ings] - [List Print (Administrato r)] from the menu bar and configure ea ch setting.
3-62 SYSTEM SETTINGS WEB PAGE (ADMINISTRATOR) Enable/Disable Settings The following s ettings are used to proh ibit the use of certain fu nctions. Select [System Settings] - [Enable/Dis able Settings] from the menu bar and configure each sett ing.
3-63 SYSTEM SETTINGS WEB PAGE (ADMINISTRATOR) Printer Settings Prohibit Notice Page Printing This setting is used to disable printing of notice pages. Prohibit Test Page Printing This setting is used to disable printing of test pages.
3-64 SYSTEM SETTINGS WEB PAGE (ADMINISTRATOR) Storing/Calling of System Settings The current system setti ngs can be stored, previously store d system settings can be retrieved, and the factory default system settings can be res tored. Select [System Settings] - [Sto ring/Calling of System Setti ngs] from the menu bar and configure each sett ing.
3-65 SYSTEM SETTINGS APPENDIX System Settings Menu (Operation Panel) T otal Count System Settings Entering Administrator's P asswor d Clock Adjust Ke yboard Select Device Count Job Count All Cust.
3-66 SYSTEM SETTINGS System Settings Menu (Web Page) T otal Count System Settings Entering Administrator's Pass word K eyboard Select Clock Adjust Device Count Job Count All Custom Setting List P.
4-1 This chapter provides soluti ons to possible problems in a question and a nswer format. Locate the question that relates to your problem and use th e answer to help correct the situat ion. If you are unable to solve a problem using this manual, please contact your dealer or nearest SHARP Service Department.
4-2 TROUBLESHOOTING This section explains what to do whe n a paper misfeed occurs in the machine. REMOVING MISFEEDS When a paper misfeed occurs, the message "A misfeed has occurred." will appear in the di splay and printing will stop. In this event, select the [Information] key in the display.
4-3 TROUBLESHOOTING HOW TO REMOVE MISFEEDS If you require more inform ation when reading the instructio ns in the dis play, see the pa per misfeed illustrations below. Refer to the illustration below and t hen go to the appropri ate illustration (1 to 9) for your situation.
4-4 TROUBLESHOOTING (4) Paper misfeed in the reversing unit Open the right side cover, open the paper co nveyor cover, and re move the paper. If the misfeed is not in the above location, gr asp the handle on the second ary transfer rolle r unit, slowly open the unit, an d remove the paper.
4-5 TROUBLESHOOTING (9) Paper misfeed in the finisher Open the front cover. While pressing the leve r over to the left, slide the finisher to the left until it stops. Remove the misf ed paper. Turn roller rota ting knob in the direction of th e arrow to remove the misfed paper.
4-6 TROUBLESHOOTING Follow the steps below to remove a staple jam. FINISHER REMOVING STAPLE JAMS Caution Take care that a bent staple do es not hurt you. 1 Open the cover. 2 While pressing the lever over to the left, slide the finisher to the left until it stops.
4-7 TROUBLESHOOTING 5 Lower the lever at the front end of the staple case. 6 Replace the staple case. Push the staple case in until it clicks into place. 7 Slide the finisher back to the right. Gently slide the finisher back to the right until it locks into its original position.
4-8 TROUBLESHOOTING PRINTING PROBLEMS RELATED TO PRIN TING OPERATION • Printing d oes not take p lace.. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-9 • Color printin g does not take place.
4-9 TROUBLESHOOTING PROBLEMS RELATED TO PRINTING OPERATION Problem Point to check Solution Printing does not take place. Is your computer connected correctly to the machine? Make sure that the cable is connected securely to the LAN connector or the USB co nnector on your comp uter and the machine .
4-10 TROUBLESHOOTING Printing does not take place. Is the I/O timeout setting too short? If the I/O timeout setting is too short, errors may occur while writing to the printer. Ask t he administrator of the machine to configure an appropriat e time in "I/O Timeout".
4-11 TROUBLESHOOTING PROBLEMS RELATED TO PRINT RESULTS Direct printing of a file in a shared folder on a computer is not possible . Is "IPsec Settings" enabled on the machine? When "IPs.
4-12 TROUBLESHOOTING Colors are off. Did you perf orm "Registration Adjustment"? Ask your administrator to perform "Registration Adjustment". If the colors are out of positi on in the printe d output of a color print job, "Registration Adjustment" can be used to adjust the print position of each color.
4-13 TROUBLESHOOTING The image is upside down. Is the correct binding position sele cted for two-sided printing? When two-sided printing is performed, every o ther page is printed upside down when tablet bi nding is select ed for the binding position.
4-14 TROUBLESHOOTING PROBLEMS RELATED TO FILING PROBLEMS RELATED TO FILE MANAGEMENT Problem Point to check Solution Retention does not take place. Did you select retention settings in the printer driver? In print mode, enable re tention on the [Job Hand ling] tab of the printer driver.
4-15 TROUBLESHOOTING GENERAL PROBLEMS PROBLEMS RELATED TO MACHINE OPERA TION • Specified m achine functio ns cannot be used.. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .4-16 • The operat ion panel ca nnot be us ed.
4-16 TROUBLESHOOTING PROBLEMS RELATED TO MACHINE OPERATION Problem Point to check Solution Specified machine functions cannot be used. Have functions been di sabled by the administrator? Some functions may have been disabled in the "User Control" (Web page only) or system settings (administrator).
4-17 TROUBLESHOOTING The operation panel cannot be used. Does the message "C all for service. Code:xx-xx*." appear in the display? *Letters and num bers appear in xx-xx. Make sure that the DATA indicator is not blinking or lit and then switch off the [POWER] key ( ) and the main power switch.
4-18 TROUBLESHOOTING PROBLEMS RELATED TO PAPER FEEDING AND OUTPUT Problem Point to check Solution The paper misfeeds. Is a torn piece of paper remaining in the machine? Make sure all paper is removed.
4-19 TROUBLESHOOTING PROBLEMS RELATED TO QU ALITY / PRINT RESULTS Paper does not feed from the paper tray. Is the paper loaded correctly in the paper tray? Set the guides to the size of the paper. Ma ke sure the height of the paper does not exceed the indicator line.
4-20 TROUBLESHOOTING Toner does not adhere well or creases appear in the paper. Are you using paper that is not within the specifications? Use SHARP-recommended paper. Using paper that is for other models or special pap er that is not suppo rted may result in misfeeds, creases, or smudges.
4-21 TROUBLESHOOTING PROBLEMS RELATED TO PERIPHERAL DEVICES Problem Point to check Solution The connected USB device cannot be used. Is the USB device compatible with the machine? Ask your dealer if the device is compatible with the machine.
4-22 TROUBLESHOOTING OTHER PROBLEMS Stapled output doe s not collect neatly. Is the paper curled? It may help to turn the pape r over in the paper tray. Problem Point to check Solution Preview images or thumbnail images do not appear. Are there a number of jobs waiting to be executed? Wait until several of the jobs have been execute d.
SHARP ELECTRONICS CORPORATION 1 Sharp Plaza, Mahwah, New Jersey 07495-1163. www.sharpusa.com SHARP ELECTRONICS OF CANADA LTD. 335 Britannia Road East, Mississauga, Ontario, L4Z 1W9 MXC400P-US-Z1 Opera.
Un punto importante, dopo l’acquisto del dispositivo (o anche prima di acquisto) è quello di leggere il manuale. Dobbiamo farlo per diversi motivi semplici:
Se non hai ancora comprato il Sony MX-C400P è un buon momento per familiarizzare con i dati di base del prodotto. Prime consultare le pagine iniziali del manuale d’uso, che si trova al di sopra. Dovresti trovare lì i dati tecnici più importanti del Sony MX-C400P - in questo modo è possibile verificare se l’apparecchio soddisfa le tue esigenze. Esplorando le pagine segenti del manuali d’uso Sony MX-C400P imparerai tutte le caratteristiche del prodotto e le informazioni sul suo funzionamento. Le informazioni sul Sony MX-C400P ti aiuteranno sicuramente a prendere una decisione relativa all’acquisto.
In una situazione in cui hai già il Sony MX-C400P, ma non hai ancora letto il manuale d’uso, dovresti farlo per le ragioni sopra descritte. Saprai quindi se hai correttamente usato le funzioni disponibili, e se hai commesso errori che possono ridurre la durata di vita del Sony MX-C400P.
Tuttavia, uno dei ruoli più importanti per l’utente svolti dal manuale d’uso è quello di aiutare a risolvere i problemi con il Sony MX-C400P. Quasi sempre, ci troverai Troubleshooting, cioè i guasti più frequenti e malfunzionamenti del dispositivo Sony MX-C400P insieme con le istruzioni su come risolverli. Anche se non si riesci a risolvere il problema, il manuale d’uso ti mostrerà il percorso di ulteriori procedimenti – il contatto con il centro servizio clienti o il servizio più vicino.
