Manuale d’uso / di manutenzione del prodotto J-10SDI del fabbricante Sony
Vai alla pagina of 57
COMP ACT PLA YER J-10 J-10SDI J-30 J-30SDI OPERA TION MANUAL [English] 1st Edition (J-30/30SDI) (J-30/30SDI).
W ARNING To prevent fire or shock hazard, do not expose the unit to rain or moisture. To avoid electrical shock, do not open the cabinet. Refer servicing to qualified personnel only.
A VER TISSEMENT Afin d’éviter tout risque d’incendie ou d’électrocution, ne pas exposer cet appareil à la pluie ou à l’humidité. Afin d’écarter tout risque d’électrocution, garder le coffret fermé. Ne confier l’entretien de l’appareil qu’à un personnel qualifié.
Pour les clients européens Ce produit portant la marque CE est conforme à la fois à la Directive sur la compatibilité électromagnétique (EMC) (89/ 336/CEE) et à la Directive sur les basses tensions (73/23/ CEE) émises par la Commission de la Communauté européenne.
Table of Contents 1 Chapter 1 Overview 1-1 Bef ore Using .................................................................................... 1-1 1-2 F ea tur es .........................................................................................
Ta b le of Contents 2 Table of Contents Chapter 8 Maintenance and Inspection 8-1 Removing a Cassette When T ape Slack Occurs ........................... 8-1 8-2 Head Cleaning ............................................................................
Chapter 1 Overview Chapter 1 Overview 1-1 Chapter 1 Over vie w 1-1 Bef ore Using When using this unit for the first time, set the number of scan lines to the NTSC (525 scan lines, field frequency 60 H.
Chapter 1 Overview 1-2 Chapter 1 Overview 1-2 Features The J-10/10SDI/30/30SDI (also referred to simply as the unit(s) in this manual) are compact players based on the 1 / 2 -inch tape format. They play tapes recorded in conventional Betacam/ Betacam SP format.
Chapter 1 Overview Chapter 1 Overview 1-3 .............................................................................................................
Chapter 1 Overview 1-4 Chapter 1 Overview 1-3 Sample System Configuration Example for the J-10/10SDI Digital cassette J-10/10SDI SDI (J-10SDI) S video/analog composite/ analog component (J-10) VTR Bet.
Chapter 1 Overview Chapter 1 Overview 1-5 Example for the J-30/30SDI Digital cassette J-30/30SDI SDI (J-30SDI) S video/analog composite/ analog component (J-30) VTR Betacam SP camcorder Analog cassett.
Chapter 2 Location and Function of Parts Chapter 2 Location and Function of Parts 2-1 Chapter 2 Location and Function of P ar ts 2-1 Contr ol P anel 1 Carrying handle 2 POWER switch 3 Cassette compart.
Chapter 2 Location and Function of Parts 2-2 Chapter 2 Location and Function of Parts 2-1-1 Displa y Section 1 LTC/VITC button 2 SET/MENU button 3 AU MON SEL/DOLBY C NR button 4 SHIFT button 5 CTL/TC/UB button 2-1 Control P anel 3 Cassette compartment Insert an S or L cassette.
Chapter 2 Location and Function of Parts Chapter 2 Location and Function of Parts 2-3 2 SET/MENU button Use this button for setup menu operations and settings. Press the SET/MENU button while holding down the SHIFT button to display the contents of the setup menu items on the FL display.
Chapter 2 Location and Function of Parts 2-4 Chapter 2 Location and Function of Parts MODEL NAME DNW 0090 SERIAL NUMBER 010001 DATE 2001.05.11 TIME 12.
Chapter 2 Location and Function of Parts Chapter 2 Location and Function of Parts 2-5 Audio monitor display area • L/R audio level meter Indicates the audio levels of the 2 optionally selected channels making up L/R (Left/Right). • L/R audio channel display Indicates the optionally selected channel numbers.
Chapter 2 Location and Function of Parts 2-6 Chapter 2 Location and Function of Parts 2-1 Control P anel Tape transport indicator area • Tape transport indicator When you press each button in the tape transport control section, the corresponding indicators light.
Chapter 2 Location and Function of Parts Chapter 2 Location and Function of Parts 2-7 • If the unit carries out reverse playback in the shuttle mode at –0.5 times or less normal speed for 20 consecutive minutes, the reel motor heat protection circuit automatically functions and the unit enters still mode.
Chapter 2 Location and Function of Parts 2-8 Chapter 2 Location and Function of Parts 2-2-1 Connector P anel of the J-10/30 2-2 Connector P anel 2 RS232C connector 5 VIDEO OUTPUT connectors 6 AUDIO MO.
Chapter 2 Location and Function of Parts Chapter 2 Location and Function of Parts 2-9 DV (i.LINK DV) output connector (IEEE1394, 6-pin): Outputs video/audio signals in DV format (IEEE1394, 6-pin).
Chapter 2 Location and Function of Parts 2-10 Chapter 2 Location and Function of Parts 2-2-2 Connector P anel of the J-10SDI/30SDI 2 RS232C connector 6 VIDEO OUTPUT connectors 7 AUDIO MONITOR OUTPUT c.
Chapter 2 Location and Function of Parts Chapter 2 Location and Function of Parts 2-11 DV (i.LINK DV) output connector (IEEE1394, 6-pin): Outputs video/audio signals in DV format.
Chapter 3 Preparations Chapter 3 Preparations 3-1 Chapter 3 Preparations 3-1 Installation You can install this unit horizontally as well as vertically. However, it is necessary to use the supplied vertical installation stands to prepare the unit for vertical installation as shown in the figure.
Chapter 3 Preparations 3-2 Chapter 3 Preparations 3-2 Cassettes Cassette types This unit uses the following 1 / 2 -inch tape width cassettes: •D igital Betacam cassette (J-30/30SDI only) •M PEG IM.
Chapter 4 Playback Chapter 4 Playback 4-1 SHIFT button Cassette compartment PLAY button Chapter 4 Pla ybac k 4-1 Pla ybac k Pr ocedures If you play back to the end of the tape The tape is automatically rewound, and stops.
4-1 Pla ybac k Pr ocedures Chapter 4 Playback 4-2 Chapter 4 Playback 4-1-2 Pla yback in Jog Mode In jog mode, the JOG dial controls the playback speed based the speed at which the dial is turned. The playback speed range is ±1 times normal speed. Use the following procedure to carry out playback in jog mode.
Chapter 4 Playback Chapter 4 Playback 4-3 2 Turn the SHUTTLE dial to the angle corresponding to the desired playback speed. Playback in shuttle mode starts. 3 Return the SHUTTLE dial to the center indent position or press the STOP button to cancel shuttle mode playback.
4-1 Pla ybac k Pr ocedures Chapter 4 Playback 4-4 Chapter 4 Playback To perform frame step playback Put the unit into noiseless mode and press the PF-1 or PF-2 button. When you are using the Betacam SX format, each press of the PF-1 button steps 2 frames back, and each press of the PF-2 button steps 2 frames forward.
Chapter 4 Playback Chapter 4 Playback 4-5 4-2 Superimposed Character Inf ormation When basic menu item 005 of the setup menu DISPLAY INFORMATION SELECT is set as anything other than OFF, the video sig.
4-1 Pla ybac k Pr ocedures Chapter 4 Playback 4-6 Chapter 4 Playback 4-3 Using the Remote Commander Pull off the transparent film covering the battery parts. 4-3-1 How to Change the Lithium Battery 1 Pull out the lithium battery case. Pull the battery case toward you while releasing the lock by plucking it with your fingernail.
Chapter 4 Playback Chapter 4 Playback 4-7 2 Turn the JOG/SHUTTLE dial to change the setting from “OFF” to “ON” while holding down the JOG/ SHUTTLE button, and then release the JOG/ SHUTTLE button. (ON flashes while the JOG/SHUTTLE button is being pressed.
4-1 Pla ybac k Pr ocedures Chapter 4 Playback 4-8 Chapter 4 Playback 4-4 Operation via Computer (With the JZ-1 Software) The following operations will be available when using the unit connected to a computer with the optional JZ- 1 software installed.
Chapter 5 UMID Functions Chapter 5 UMID Functions 5-1 Chapter 5 UMID Functions 5-1 Overview of UMID Functions The UMID (Unique Material Identifier) is a type of meta-data in video and audio materials. It has been internationally standardized in SMPTE Standard 330M.
Chapter 5 UMID Functions 5-2 Chapter 5 UMID Functions 5-2 UMID Output and Displa y This section explains how to output and display UMIDs. 5-2-1 UMID Output Settings You can choose to output UMIDs or not from the SDI or SDI (SUPER) output connector, and select either Basic UMID or Extended UMID when you choose to output UMIDs.
Chapter 6 Essence Marks Chapter 6 Essence Marks 6-1 Chapter 6 Essence Marks 6-1 Overview of Essence Mark Functions An essence mark uses a term value dictionary item as defined in the SMPTE RP210A Metadata Dictionary to express and transfer points such as recording start points and edit point candidates in up to 32 bytes of data.
5-2 Menu Operations Chapter 6 Essence Marks 6-2 Chapter 6 Essence Marks 6-2 Essence Mark Output When playing back a tape, essence marks recorder on the tape can be output to SDI signals. Information such as shot marks recorded on the tape can also be converted into essence marks and output.
Chapter 7 Setup Menu Chapter 7 Setup Menu 7-1 Chapter 7 Setup Men u 7-1 Menu System Configuration The principal setup operations required before operating this unit can be carried out using setup menus. The menu system of this unit is comprised of a basic menu and an extended menu.
7-2 Menu Operations Chapter 7 Setup Menu 7-2 Chapter 7 Setup Menu SHIFT button SET/MENU button Item number (flashing) Item name (first four characters) Cursor indicating the currently selected item JO.
Chapter 7 Setup Menu Chapter 7 Setup Menu 7-3 Setting value (flashes while changing) SET/MENU button Changing a menu item setting value To change the setting value of the currently displayed menu item, use the following procedure. 1 Holding down the JOG/SHUTTLE button, turn the JOG/SHUTTLE dial.
7-2 Menu Operations Chapter 7 Setup Menu 7-4 Chapter 7 Setup Menu 525 525/625 SYSTEM SELECT If the 525/625 setting is changed, turn power off and on! 525/625 SYSTEM SELECT ITEM-013 ON Push SET button!.
Chapter 7 Setup Menu Chapter 7 Setup Menu 7-5 625 525/625 SYSTEM SELECT POWER off/on!! 625 525/625 SYSTEM SELECT Push SET button!! Current active menu settings Recall Save Menu bank 1 Recall Save Menu bank 2 4 Holding down the JOG/SHUTTLE button, turn the JOG/SHUTTLE dial to change the setting from 525 to 625.
7-2 Menu Operations Chapter 7 Setup Menu 7-6 Chapter 7 Setup Menu Extended menu operations You can operate the extended menu in the same way as you operate the basic menu. For details of basic menu operations, see page 7-2. Note To access the extended menu, it is required to set MENU GRADE, basic menu item 099, to ENHAN.
Chapter 7 Setup Menu Chapter 7 Setup Menu 7-7 7-3 Basic Menu a) When setting items 002, 003, 009 and 011 watch the monitor screen, and adjust to the required state.
7-3 Basic Menu Chapter 7 Setup Menu 7-8 Chapter 7 Setup Menu 012 CONDITION DISPLAY ON VIDEO MONITOR (The channel status can be displayed only when the CHARACTER V-SIZE is set to × 1.) Determines whether or not to display the channel status in addition to the characters being superimposed.
Chapter 7 Setup Menu Chapter 7 Setup Menu 7-9 Item number Item name Settings 027 SDI OUT CHARACTER (J-10SDI/30SDI only) Select whether or not to superimpose the type of characters over the video signal (overlap display) output from the SDI (SUPER) connectors.
7-4 Extended Menu Chapter 7 Setup Menu 7-10 Chapter 7 Setup Menu 7-4 Extended Menu The extended menu contains the following items. In the “Settings” column of the table, the factory default settings are indicated by an enclosing box.
Chapter 7 Setup Menu Chapter 7 Setup Menu 7-11 Item number Item name Settings 501 STILL TIMER Sets the time interval from the tape stop mode to the tape protection mode.
7-4 Extended Menu Chapter 7 Setup Menu 7-12 Chapter 7 Setup Menu 808 INTERNAL AUDIO SIGNAL GENERATOR Select the operation of the internal audio test signal generator. OFF : No operation. 1KHZ: At 1 kHz, –20 dB FS sine wave is output on all audio output channels.
Chapter 8 Maintenance and Inspection Chapter 8 Maintenance and Inspection 8-1 Chapter 8 Maintenance and Inspection 8-1 Remo ving a Cassette When T ape Slac k Occurs If tape slack occurs in the unit, it is necessary to remove the top and bottom plates.
8-1 Remo ving a Cassette When T ape Slac k Occurs Chapter 8 Maintenance and Inspection 8-2 Chapter 8 Maintenance and Inspection 8-3 Moisture Condensation When the unit is suddenly moved from a cold to a warm location, or used in a very humid place, moisture from the air can condense on the head-drum.
Chapter 8 Maintenance and Inspection Chapter 8 Maintenance and Inspection 8-3 8-4 Err or Messages CODE MESSAGE ERRORS 01 REEL TROUBLE Detected “tape slack” during threading or unthreading. 02 REEL TROUBLE Detected “tape slack” or “tape break” during search, fast-forward, or rewind.
8-1 Remo ving a Cassette When T ape Slac k Occurs Chapter 8 Maintenance and Inspection 8-4 Chapter 8 Maintenance and Inspection The digital hours meter can display nine items of information, in corresponding display modes, about the operational history of the unit.
Appendix Appendix A-1 Appendix Specifications General Power requirements 100 to 240 VAC, 50/60 Hz Power consumption 55 W Rated current 0.55 A Peak inrush current (1) Power ON, current probe method: 40.
Specifications Appendix A-2 Appendix Jog mode Still to ±1 times normal playback speed Servo lock time (from standby) 1.5 second or less Load/unload time 7 seconds or less Cassette types Digital Betac.
Appendix Appendix A-3 Remote connectors RS232C D-sub 9-pin, male, Sony 9-pin Remote Interface REMOTE IN (9P) D-sub 9-pin, female, Sony 9-pin Remote Interface Input connector EXT SYNC BNC (1), Frame lock Input/output connectors of J-10SDI/30SDI Output connectors COMPOSITE (SUPER) BNC (1), Phono jack (1), including character superimposition 1.
The material contained in this manual consists of information that is the property of Sony Corporation and is intended solely for use by the purchasers of the equipment described in this manual.
Son y Cor poration B & P Company J-10/10SDI/ 30/30SDI (SY) 3-826-997- 01 (1) 2004.
Un punto importante, dopo l’acquisto del dispositivo (o anche prima di acquisto) è quello di leggere il manuale. Dobbiamo farlo per diversi motivi semplici:
Se non hai ancora comprato il Sony J-10SDI è un buon momento per familiarizzare con i dati di base del prodotto. Prime consultare le pagine iniziali del manuale d’uso, che si trova al di sopra. Dovresti trovare lì i dati tecnici più importanti del Sony J-10SDI - in questo modo è possibile verificare se l’apparecchio soddisfa le tue esigenze. Esplorando le pagine segenti del manuali d’uso Sony J-10SDI imparerai tutte le caratteristiche del prodotto e le informazioni sul suo funzionamento. Le informazioni sul Sony J-10SDI ti aiuteranno sicuramente a prendere una decisione relativa all’acquisto.
In una situazione in cui hai già il Sony J-10SDI, ma non hai ancora letto il manuale d’uso, dovresti farlo per le ragioni sopra descritte. Saprai quindi se hai correttamente usato le funzioni disponibili, e se hai commesso errori che possono ridurre la durata di vita del Sony J-10SDI.
Tuttavia, uno dei ruoli più importanti per l’utente svolti dal manuale d’uso è quello di aiutare a risolvere i problemi con il Sony J-10SDI. Quasi sempre, ci troverai Troubleshooting, cioè i guasti più frequenti e malfunzionamenti del dispositivo Sony J-10SDI insieme con le istruzioni su come risolverli. Anche se non si riesci a risolvere il problema, il manuale d’uso ti mostrerà il percorso di ulteriori procedimenti – il contatto con il centro servizio clienti o il servizio più vicino.
